CoChat

Pyrolysis temperature and feedstock alter the functional groups and carbon sequestration potential of Phragmites australis‐ and Spartina alterniflora‐derived biochars

Open access
Wang, Wei, Bai, Junhong, Lu, Qiongqiong, Zhang, Guangliang, Wang, Dawei, Jia, Jia, Guan, Yanan, Yu, Lu · 2021 · GCB Bioenergy
Cited by 58

The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.

Abstract

Biochar produced by pyrolysis of biomass under oxygen‐limited conditions has recently attracted increasing attention. To investigate the effects of feedstock and pyrolysis temperature on biochar characteristics, Phragmites australis straw and Spartina alterniflora straw were used to produce biochars at different temperatures from 300 to 500°C with an increment of 50°C. The biochars were characterized by their yields, ash contents, elemental compositions (i.e., carbon [C], hydrogen [H], oxygen [O], and nitrogen [N]), functional groups, dissolved organic carbon (DOC) contents, carbon sequestration potential, higher heating values (HHVs), and production costs. The results illustrated that pyrolysis temperature negatively affected biochar yields, H and O contents. In contrast, biochar produced at high temperature showed high ash contents, C contents, HHVs, and stronger aromaticity with low H/C and O/C ratios. In addition, S. alterniflora‐derived biochar (SB) contained higher ash content but lower C/H/N/O contents and HHVs than P. australis‐derived biochar (PB; p < 0.05). In addition, DOC contents in both SB and PB declined as temperature increased, and SB exhibited higher DOC contents than PB. Fourier transform infrared spectroscopy showed that absorption intensities of –OH, C=O, –CH, and –C–O–C‐stretching vibration declined with increasing temperature. The stability of the biochars was enhanced at high temperatures, and the biochar derived from S. alterniflora at 500°C might have a better carbon sequestration potential according to thermogravimetric analysis. Additionally, cost analysis showed that the production cost of biochar with large‐scale reactor was lower than that with bench‐scale reactor, and SB had a higher cost than PB due to the price of feedstock and drying process for the former. Our results could offer effective information on resource utilization of P. australis and S. alterniflora straw and are valuable for optimizing pyrolysis temperature to tune P. australis and S. alterniflora biochar properties for specific environmental usage.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1111/gcbb.12795

Cites

11 of 11 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 11 references

Metadata

Authors
Wang, W., Bai, J., Lu, Q., Zhang, G., Wang, D., Jia, J., Guan, Y., & Yu, L.
Venue
GCB Bioenergy
Publisher
Wiley
Published
2021-01-16
Volume
13
Issue
3
Pages
493-506
ISSN
  • 1757-1693 (ISSN-L)
  • 1757-1707
OpenAlex
W3123476416
Cited by
58
References
11
FWCI
2.45
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.