Microstructure, Texture, and Thermal Conductivity of Single‐Layer and Multilayer Thermal Barrier Coatings of Y2O3‐Stabilized ZrO2 and Al2O3 Made by Physical Vapor Deposition
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Thermal conductivity is one of the most important properties in the design of thermal barrier coatings (TBCs) for high‐temperature gas‐turbine blades. In the present study, the thermal conductivities of several TBCs were studied. Single‐layer and multilayer coatings consisting of Al 2 O 3 and ZrO 2 partially stabilized with 8 wt% Y 2 O 3 (8YSZ) were deposited on nickel‐base superalloy substrates by electron‐beam physical vapor deposition (EB‐PVD). A columnar microstructure with (200) texture and [200] direction oriented nearly perpendicularly to the plane of the coating was observed in the single‐layer 8YSZ coating. In multilayer coatings with alternating layers of Al 2 O 3 and 8YSZ, the tendency to develop columnar structure, as well as the intensity of (200) texture, decreased as the number of layers increased. In both the single‐layer and multilayer coatings, the 8YSZ layer consisted almost entirely of tetragonal ( t ) phase with a negligible amount of monoclinic ( m ) phase. This was in contrast to the microstructure of bulk 8YSZ (source material used for deposition), which contained a significant amount of m phase, in addition to t phase. Whereas bulk Al 2 O 3 consisted of α‐phase, only γ‐phase was found in the Al 2 O 3 layers of coatings. The thermal conductivities of these coatings were measured by the laser flash method. The thermal conductivity data of single‐layer 8YSZ coating compared well with the data on bulk ZrO 2 stabilized by 5.3 wt% Y 2 O 3 reported in the literature. This was due to the similarity of microstructures between the two. The thermal conductivity data of multilayer coatings were well described by a series heat‐transfer model calculation within the limits of experimental errors involved in the measurements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal conductivity of thin films: Measurements and understanding
Cahill, D. G., Fischer, H. E., Klitsner, T., Swartz, E. T., & Pohl, R. O. (1989) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.576265 · Cited by 321
Cited by
Cahill, D. G., Ford, W. K., Goodson, K. E., Mahan, G. D., Majumdar, A., Maris, H. J., Merlin, R., & Phillpot, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1524305 · Cited by 2,825
Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures
Cahill, D. G., Goodson, K., & Majumdar, A. (2002) · Journal of Heat Transfer · doi:10.1115/1.1454111 · Cited by 611
Scott, E. A., Gaskins, J. T., King, S. W., & Hopkins, P. E. (2018) · APL Materials · doi:10.1063/1.5021044 · Cited by 139
Metadata
- Authors
- An, K., Ravichandran, K. S., Dutton, R. E., & Semiatin, S. L.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 1999-02
- Volume
- 82
- Issue
- 2
- Pages
- 399-406
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2151590853
- Cited by
- 95
- References
- 1
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure, Texture, and Thermal Conductivity of Single‐Layer and Multilayer Thermal Barrier Coatings of Y2O3‐Stabilized ZrO2 and Al2O3 Made by Physical Vapor Deposition. https://app.cochat.ai/papers/10.1111/j.1551-2916.1999.tb20076.x
- The paper
- An, K., Ravichandran, K. S., Dutton, R. E., & Semiatin, S. L. (1999). Microstructure, Texture, and Thermal Conductivity of Single‐Layer and Multilayer Thermal Barrier Coatings of Y2O3‐Stabilized ZrO2 and Al2O3 Made by Physical Vapor Deposition. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.1999.tb20076.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.