The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Abstract
In this study, one‐part “just add water” geopolymer binders are synthesized through the alkali‐thermal activation of the red mud which is relatively rich in both alumina and calcium. Calcination of the red mud with sodium hydroxide pellets at 800°C leads to decomposition of the original silicate and aluminosilicate phases present in the red mud, which promotes the formation of new compounds with hydraulic character, including a partially ordered peralkaline aluminosilicate phase and the calcium‐rich phases C 3 A and α‐C 2 S. The hydration of the “one‐part geopolymer” leads to the formation of zeolites and a disordered binder gel as the main reaction products, and the consequent development of compressive strengths of up to 10 MPa after 7 d of curing. These results demonstrate that red mud is an effective precursor to produce one‐part geopolymer binders, via thermal and alkali‐activation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citationDuxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Self-citationStructure of Calcium Silicate Hydrate (C‐S‐H): Near‐, Mid‐, and Far‐Infrared Spectroscopy
Yu, P., Kirkpatrick, R. J., Poe, B., McMillan, P. F., & Cong, X. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01826.x · Cited by 1,640
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationGeopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Self-citationDo Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Self-citationFactors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Self-citationBauxite residue issues: III. Alkalinity and associated chemistry
Gräfe, M., Power, G., & Klauber, C. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.02.004 · Cited by 513
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Self-citationEfflorescence control in geopolymer binders based on natural pozzolan
Najafi Kani, E., Allahverdi, A., & Provis, J. L. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.07.007 · Cited by 476
Self-citationGeopolymerisation of multiple minerals
Xu, H., & Van Deventer, J. S. J. (2002) · Minerals Engineering · doi:10.1016/s0892-6875(02)00255-8 · Cited by 434
TRENDS IN RED MUD UTILIZATION – A REVIEW
PARAMGURU, R. K., RATH, P. C., & MISRA, V. N. (2004) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500490477603 · Cited by 370
Effect of admixtures on properties of alkali-activated slag concrete
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00349-5 · Cited by 368
Hydration of alkali-activated ground granulated blast furnace slag
Song, S., Sohn, D., Jennings, H. M., & Mason, T. O. (2000) · Journal of Materials Science · doi:10.1023/a:1004742027117 · Cited by 363
Effect of Alumina Release Rate on the Mechanism of Geopolymer Gel Formation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2010) · Chemistry of Materials · doi:10.1021/cm101151n · Cited by 314
Self-citationProposal for resources, utilization and processes of red mud in India — A review
Samal, S., Ray, A. K., & Bandopadhyay, A. (2013) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2012.11.001 · Cited by 305
Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements
Fernandez-Jimenez, A., & Puertas, F. (2003) · Advances in Cement Research · doi:10.1680/adcr.15.3.129.36623 · Cited by 285
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Self-citationSynthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment
Ye, N., Yang, J., Ke, X., Zhu, J., Li, Y., Xiang, C., Wang, H., Li, L., & Xiao, B. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12840 · Cited by 257
Self-citationThermal Activation of Albite for the Synthesis of One‐Part Mix Geopolymers
Feng, D., Provis, J. L., & van Deventer, J. S. J. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04925.x · Cited by 244
Self-citationUtilization of red mud in cement production: a review
Liu, X., & Zhang, N. (2011) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x11407653 · Cited by 243
One-Part Geopolymer Mixes from Geothermal Silica and Sodium Aluminate
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8006825 · Cited by 239
Self-citationBauxite residue in cement and cementitious applications: Current status and a possible way forward
Pontikes, Y., & Angelopoulos, G. N. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.01.005 · Cited by 222
UTILIZATION OF ALUMINA RED MUD FOR SYNTHESIS OF INORGANIC POLYMERIC MATERIALS
Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500802498199 · Cited by 214
Alkaline activation of metakaolin–fly ash mixtures: Obtain of Zeoceramics and Zeocements
Fernández-Jiménez, A., Monzó, M., Vicent, M., Barba, A., & Palomo, A. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.03.024 · Cited by 187
Chen, X., Lu, A., & Qu, G. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.08.042 · Cited by 176
Preparation, structure and hydrothermal stability of alternative (sodium silicate-free) geopolymers
Koloušek, D., Brus, J., Urbanova, M., Andertova, J., Hulinsky, V., & Vorel, J. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1910-5 · Cited by 175
First-principles study of the OH-stretching modes of gibbsite
Balan, E., Lazzeri, M., Morin, G., & Mauri, F. (2006) · American Mineralogist · doi:10.2138/am.2006.1922 · Cited by 159
Yang, K., & Song, J. (2009) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2009)21:3(119 · Cited by 159
Properties and microstructure of the hardened alkali-activated red mud–slag cementitious material
Pan, Z., Li, D., Yu, J., & Yang, N. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00093-0 · Cited by 157
White, C. E., Provis, J. L., Llobet, A., Proffen, T. E., & van Deventer, J. S. J. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04515.x · Cited by 142
Self-citationVolatiles in silicate melts at high pressure and temperature
Mysen, B. O., & Virgo, D. (1986) · Chemical Geology · doi:10.1016/0009-2541(86)90056-2 · Cited by 129
Corrosion resistance of alkali-activated slag cement
Shi, C. (2003) · Advances in Cement Research · doi:10.1680/adcr.2003.15.2.77 · Cited by 110
Accelerated ageing of geopolymers
Lloyd, R. R. (2009) · Elsevier eBooks · doi:10.1533/9781845696382.2.139 · Cited by 87
Dehydration of Ca3Al2(SiO4)y(OH)4(3−y) (0<y<0.176) studied by neutron thermodiffractometry
Rivas-Mercury, J. M., Peña, P., Aza, A. H. D., & Turrillas, X. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.12.038 · Cited by 65
Calcium aluminates hydration in presence of amorphous SiO2 at temperatures below 90°C
Mercury, J. M. R., Turrillas, X., Aza, A. H. D., & Peña, P. (2006) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2006.05.017 · Cited by 62
Rüscher, C. H., Mielcarek, E. M., Lutz, W., et al. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03773.x · Cited by 50
Demonstration Projects and Applications in Building and Civil Infrastructure
Provis, J. L., Brice, D. G., Buchwald, A., Duxson, P., Kаvalerova, Е., Krivenko, P. V., Shi, C., van Deventer, J. S. J., & Wiercx, J. A. L. M. (2013) · RILEM state-of-the-art reports · doi:10.1007/978-94-007-7672-2_11 · Cited by 43
Self-citationThermal evolution and thermochemistry of the cancrinite-group carbonate-oxalate mineral
Olysych, L. V., Vigasina, M. F., Melchakova, L. V., Ogorodova, L. P., Pekov, I. V., & Chukanov, N. V. (2011) · Geochemistry International · doi:10.1134/s0016702911050089 · Cited by 10
Cited by
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationOne-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationStructure and properties of clay-based geopolymer cements: A review
Liew, Y.-M., Heah, C.-Y., Mohd Mustafa, A. B., & Kamarudin, H. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.002 · Cited by 574
Metadata
- Authors
- Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2014-09-30
- Volume
- 98
- Issue
- 1
- Pages
- 5-11
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W1998045126
- Cited by
- 283
- References
- 40
- FWCI
- 26.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.