Tensile Mechanical Properties of Three-Dimensional Type I Collagen Extracellular Matrices With Varied Microstructure
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
The importance and priority of specific micro-structural and mechanical design parameters must be established to effectively engineer scaffolds (biomaterials) that mimic the extracellular matrix (ECM) environment of cells and have clinical applications as tissue substitutes. In this study, three-dimensional (3-D) matrices were prepared from type I collagen, the predominant compositional and structural component of connective tissue ECMs, and structural-mechanical relationships were studied. Polymerization conditions, including collagen concentration (0.3–3 mg/mL) and pH (6–9), were varied to obtain matrices of collagen fibrils with different microstructures. Confocal reflection microscopy was used to assess specific micro-structural features (e.g., diameter and length) and organization of component fibrils in 3-D. Microstructural analyses revealed that changes in collagen concentration affected fibril density while maintaining a relatively constant fibril diameter. On the other hand, both fibril length and diameter were affected by the pH of the polymerization reaction. Mechanically, all matrices exhibited a similar stress-strain curve with identifiable “toe,” “linear,” and “failure” regions. However, the linear modulus and failure stress increased with collagen concentration and were correlated with an increase in fibril density. Additionally, both the linear modulus and failure stress showed an increase with pH, which was related to an increased fibril length and a decreased fibril diameter. The tensile mechanical properties of the collagen matrices also showed strain rate dependence. Such fundamental information regarding the 3-D microstructural-mechanical properties of the ECM and its component molecules are important to our overall understanding of cell-ECM interactions (e.g., mechanotransduction) and the development of novel strategies for tissue repair and replacement.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140108 · Cited by 1,044
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140314 · Cited by 889
[2] Preparation and characterization of the different types of collagen
Miller, E. J., & Kent Rhodes, R. (1982) · Methods in Enzymology · doi:10.1016/0076-6879(82)82059-4 · Cited by 752
Collagen; ultrastructure and its relation to mechanical properties as a function of ageing
Diamant, J., Keller, A., Baer, E., Litt, M., & Arridge, R. G. C. (1972) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1972.0019 · Cited by 553
Isometric contraction by fibroblasts and endothelial cells in tissue culture: a quantitative study
Kolodney, M., & Wysolmerski, R. (1992) · The Journal of cell biology · doi:10.1083/jcb.117.1.73 · Cited by 447
Wood, G. C., & Keech, M. K. (1960) · Biochemical Journal · doi:10.1042/bj0750588 · Cited by 443
Regulation of extracellular matrix gene expression by mechanical stress
Chiquet, M. (1999) · Matrix Biology · doi:10.1016/s0945-053x(99)00039-6 · Cited by 427
Pins, G. D., Christiansen, D. L., Patel, R., & Silver, F. H. (1997) · Biophysical Journal · doi:10.1016/s0006-3495(97)78247-x · Cited by 390
Research works printed but not linked: 1
- Bateman, J. F., Lamande, S. R., and Ramshaw, J. A. M., 1996, “Collagen Superfamily,” Extracellular Matrix Vol. 2., Molecular Components and Interaction, ed., W. D. Comper, Harwood Academic Publishers, The Netherlands, pp. 22–67.
Cited by
Items 401–500 of 694
Centrifugation-induced fibrous orientation in fish-sourced collagen matrices
Zhang, J., Sun, Y., Yan, Z., Wei, B., Xu, C., He, L., Oliveira, C. L. P., & Wang, H. (2017) · Soft Matter · doi:10.1039/c7sm01871a · Cited by 15
Ibrahim, H. S., Thorpe, S. D., Paukshto, M. V., Zaitseva, T. S., Moritz, W., & Rodriguez, B. J. (2022) · SLAS TECHNOLOGY · doi:10.1016/j.slast.2022.05.001 · Cited by 15
The role of cell-matrix adhesion and cell migration in breast tumor growth and progression
Chong, L. H., Yip, A. K., Farm, H. J., Mahmoud, L. N., Zeng, Y., & Chiam, K. (2024) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2024.1339251 · Cited by 15
Kim, H., Caspar, T. W., Shah, S. B., & Hsieh, A. H. (2015) · The Spine Journal · doi:10.1016/j.spinee.2015.03.017 · Cited by 15
“In addition, the stiffness and microstructural properties (eg, density, porosity, crosslinking) of collagen gels have been characterized to be in the range for optimal neurite extension [52] and can be readily manipulated [53,54].”
BackgroundIntegrating structural heterogeneity, fiber orientation, and recruitment in multiscale ECM mechanics
Li, H., Mattson, J. M., & Zhang, Y. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.12.023 · Cited by 15
Novel biohybrid spongy scaffolds for fabrication of suturable intraoral graft substitutes
Mehwish, N., Chen, Y., Zaeem, M., Wang, Y., Lee, B. H., & Deng, H. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.125 · Cited by 15
Abbey, C. A., & Bayless, K. J. (2014) · Matrix Biology · doi:10.1016/j.matbio.2014.06.006 · Cited by 15
“Because collagen matrices at higher density have been reported to be stiffer (Roeder et al., 2002; Provenzano et al., 2009; Critser et al., 2010), we tested for changes in the mechanosensitive protein, zyxin.”
BackgroundMeimandi-Parizi, A., Oryan, A., Moshiri, A., & Silver, I. A. (2013) · Tissue and Cell · doi:10.1016/j.tice.2013.03.005 · Cited by 14
Computational modeling of the arterial wall based on layer-specific histological data
Jin, T., & Stanciulescu, I. (2016) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-016-0778-1 · Cited by 14
“Also, more detailed geometric information regarding the fiber microscopic arrangement can be acquired via advanced image processing technologies such as confocal reflection imaging (Roeder et al. 2002; Arganda-Carreras et al. 2010) or scanning electron microscopy (SEM) (D’Amore et al. 2010).”
MethodIntratumoral Heterogeneity Promotes Collective Cancer Invasion through NOTCH1 Variation
Torab, P., Yan, Y., Ahmed, M. A., Yamashita, H., Warrick, J. I., Raman, J. D., DeGraff, D. J., & Wong, P. K. (2021) · Cells · doi:10.3390/cells10113084 · Cited by 14
“5 using NaOH, allowing for fast gelation and physiological pH [23].”
MethodEvolution of Force Chains Explains the Onset of Strain Stiffening in Fiber Networks
Sarkar, M., & Notbohm, J. (2022) · Journal of Applied Mechanics · doi:10.1115/1.4055586 · Cited by 14
Sancho, A., Vázquez, L., & De‐Juan‐Pardo, E. M. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035017 · Cited by 14
Intact collagen and atelocollagen sponges: Characterization and ESEM observation
Ruozi, B., Tosi, G., Leo, E., Parma, B., Vismara, S., Forni, F., & Vandelli, M. A. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.08.018 · Cited by 14
Yrineo, A. A., Adelsperger, A. R., Durkes, A. C., Distasi, M. R., Voytik‐Harbin, S. L., Murphy, M. P., & Goergen, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.12.045 · Cited by 14
“Oligomers also polymerize within minutes to form D-banded collagen-fibril materials with tunable properties, including fibril microstructure, matrix stiffness, and proteolytic degradation based on the polymerization parameters such as total collagen concentration and oligomer to monomer ratio [22,24,25].”
BackgroundSelf-citationDu, Y., Herath, S. C. B., Wang, Q. G., Asada, H. H., & Chen, P. C. Y. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.002 · Cited by 14
Cartilage and Ligament Tissue Engineering
Kuo, C. K., Li, W., & Tuan, R. S. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087780-8.00114-5 · Cited by 14
Boyer, G. (2010) · theses.fr (ABES) · doi:10.70675/1780511cz42e8z491az9271z8152a6c5a51a · Cited by 14
Werbner, B., Zhou, M., McMindes, N. R., Lee, A., Lee, M., & O’Connell, G. D. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104951 · Cited by 13
Moshiri, A., Oryan, A., & Meimandi-Parizi, A. (2013) · Connective Tissue Research · doi:10.3109/03008207.2013.787419 · Cited by 13
Fibroblast Derived Human Engineered Connective Tissue for Screening Applications
Santos, G. L., Meyer, T., Tiburcy, M., DeGrave, A. N., Zimmermann, W., & Lutz, S. (2021) · Journal of Visualized Experiments · doi:10.3791/62700 · Cited by 13
Cirka, H. A., Koehler, S. A., Farr, W. W., & Billiar, K. L. (2012) · Annals of Biomedical Engineering · doi:10.1007/s10439-012-0532-5 · Cited by 13
Microstructural Parameter-Based Modeling for Transport Properties of Collagen Matrices
Park, S., Whittington, C. F., Voytik‐Harbin, S. L., & Han, B. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4029920 · Cited by 13
“However, at the same time, it decreases mechanical properties such as compressive modulus [2,7].”
BackgroundSelf-citationMechanical Interactions of Mouse Mammary Gland Cells with Collagen in a Three-Dimensional Construct
Lopez-Garcia, M. D. C., Beebe, D. J., & Crone, W. C. (2010) · Annals of Biomedical Engineering · doi:10.1007/s10439-010-0015-5 · Cited by 13
Marelli, B., Ghezzi, C. E., Alessandrino, A., Freddi, G., & Nazhat, S. N. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00477a · Cited by 13
A novel micro-to-macro approach for cardiac tissue mechanics
Haddad, S. M. H., & Samani, A. (2016) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2016.1214270 · Cited by 13
Meghezi, S., Drouin, B., & Mantovani, D. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100737-2.00016-9 · Cited by 13
Computational models of molecular self-organization in cellular environments
LeDuc, P. R., & Schwartz, R. S. (2007) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-007-0012-y · Cited by 13
“The ECM, for example, is crucial to the mechanical properties of skin, cartilage, blood vessels, ligaments, and tendons, among many other tissues [50, 90, 109].”
BackgroundZhou, L., Shi, Z., Yang, X., Zeng, J., You, Z., Zhang, Y., Zhu, Z., Liu, Z., Niu, Y., Yu, H., et al. (2025) · Nature Biomedical Engineering · doi:10.1038/s41551-025-01381-0 · Cited by 12
“The two phases of collagen stress stiffening are consistent with the trend measured macroscopically 45 .”
Yanai, T., Onuma, K., Crotin, R. L., & Monda, D. (2023) · Scientific Reports · doi:10.1038/s41598-023-39504-9 · Cited by 12
Out of Many, One: Modeling Schemes for Biopolymer and Biofibril Networks
Sander, E. A., Stein, A. M., Swickrath, M. J., & Barocas, V. H. (2009) · Challenges and advances in computational chemistry and physics · doi:10.1007/978-1-4020-9785-0_19 · Cited by 12
Matheson, A., Sheehy, E. J., Jay, G. D., Scott, W. M., O’Brien, F. J., & Schmidt, T. A. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104445 · Cited by 12
Silicified collagen materials: Modulation of the in vitro and in vivo response
Foglia, M. L., Mitarotonda, R., Marzi, M. C. D., & Desimone, M. F. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.086 · Cited by 12
Controlling magnesium corrosion and degradation-regulating mineralization using matrix GLA protein
Hong, D., Zaky, S. H., Chong, R., Lukashova, L., Beniash, E., Verdelis, K., Witte, F., & Sfeir, C. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.048 · Cited by 12
Localized application of mechanical and biochemical stimuli in 3‐D culture
Petroll, W. M., & Ma, L. (2008) · Developmental Dynamics · doi:10.1002/dvdy.21629 · Cited by 12
Preclinical Studies and Clinical Trials on Cell-Based Treatments for Meniscus Regeneration
Li, X., Li, D., Li, J., Wang, G., Yan, L., Liu, H., Jiu, J., Li, J. J., & Wang, B. (2023) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2023.0050 · Cited by 11
“131 In addition, collagen scaffolds can degrade rapidly in the body within a few days after implantation, which may negatively impact the long-term effectiveness of meniscus regeneration.”
Nguyen, U. N., Lee, F. S., Caparaso, S. M., Leoni, J. T., Redwine, A. L., & Wachs, R. A. (2023) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2023.2272479 · Cited by 11
“Previous studies have also demonstrated that collagen only gels (0.3–3.0 mg/mL) have a fiber diameter around ∼ 400 nm that is 4X thicker than the fibers in our triple gels and hyaluronan has been shown to change the collagen gelation dynamics [49,54].”
BackgroundInfluentialNagashima, J. B., Zenilman, S. S., Raab, A., Aranda‐Espinoza, H., & Songsasen, N. (2023) · Bioengineering · doi:10.3390/bioengineering10111285 · Cited by 11
“Work with in vitro-produced collagen matrices has demonstrated that fiber length and thickness, rather than simply total density, also modulates the mechanical properties of the collagen matrix [57].”
BackgroundImaging of cell adhesion events in 3D matrix environments
Jayo, A., & Parsons, M. (2012) · European Journal of Cell Biology · doi:10.1016/j.ejcb.2012.05.002 · Cited by 11
Adam, S., Mohanan, A., Bakshi, S., Ghadai, A., & Majumdar, S. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113380 · Cited by 10
Schöner, T. A., Vogel, V., Venczel, M., Knoth, K., Kamm, W., Paehler, T., Louit, G., Torres-Terán, I., Mundinger, P., Marker, A., et al. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.123995 · Cited by 10
Sanz‐Herrera, J. A., Apolinar–Fernández, A., Jimenez-Aires, A., Perez-Alcantara, P., Domínguez, J., & Reina-Romo, E. (2025) · Computers & Structures · doi:10.1016/j.compstruc.2025.107690 · Cited by 10
Seyfi, B., Fatouraee, N., & Samani, A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.09.006 · Cited by 10
Matsunaga, R., Takahashi, Y., Takahashi, R. H., Nagao, T., Shishido, T., Tateiwa, T., Pezzotti, G., & Yamamoto, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.09.016 · Cited by 10
pH-induced contrast in viscoelasticity imaging of biopolymers
Yapp, R. D., & Insana, M. F. (2009) · Physics in Medicine and Biology · doi:10.1088/0031-9155/54/5/001 · Cited by 10
Intravital Confocal and Two-Photon Imaging of Dual-Color Cells and Extracellular Matrix Mimics
Bal, U., Andresen, V., Baggett, B. K., & Utzinger, U. (2013) · Microscopy and Microanalysis · doi:10.1017/s1431927612014080 · Cited by 10
“…on a mismatch of refractive index between the scattering structure and the embedding medium resulting in good contrast from fibrillar structures ~Roeder et al., 2002; Friedl, 2004!. Similarly the repetitive structural nature of fibrillar collagen gives rise to frequency doubled oscillations,…”
BackgroundTopoGEN: Topology-driven microstructure generation for in silico modeling of fiber network mechanics
Cardona, S., Peirlinck, M., & Fereidoonnezhad, B. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106257 · Cited by 9
“On the experimental side, tissue engineers have developed quantitative techniques to precisely control the microstructure of reconstituted gels by adjusting temperature or pH [81, 79, 80, 38, 94, 82, 63, 57, 67, 33, 90, 91] and assess their influence on mechanical response [43].”
Biomaterials for Tissue-Engineered Treatment of Tendinopathy in Animal Models: A Systematic Review
Li, D., Wang, G., Li, J., Yan, L., Liu, H., Jiu, J., Li, X., Li, J. J., & Wang, B. (2023) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2022.0178 · Cited by 9
“119 This problem is exacerbated by the rapid biodegradation of collagen once placed inside the body, which may disap-pear within a few days, giving insufficient time for complete healing to occur and negatively affecting long-term repair.”
Kinoshita, M., Yamada, S., Sasaki, J., Suzuki, S., Kajikawa, T., Iwayama, T., Fujihara, C., Imazato, S., & Murakami, S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242115989 · Cited by 9
A Systems Approach to Study Collagen Type I Self‐Assembly: Kinetics and Morphology
Vena, M. P., van Hazendonk, L. S., van Zyl, W., Tuinier, R., & Friedrich, H. (2024) · Small Methods · doi:10.1002/smtd.202301171 · Cited by 9
Biomaterials and Its Medical Applications
Dharadhar, S., & Majumdar, A. S. (2019) · Springer eBooks · doi:10.1007/978-981-13-7142-4_18 · Cited by 9
Tissue Engineering: Alternative Option in Managing Large and Massive Tissue Deficits
Oryan, A. (2013) · Tropical Medicine & Surgery · doi:10.4172/2329-9088.1000e101 · Cited by 9
“In such tissue deficits such as tendon, bone, or cartilage defects, with large scale tissue loss, the tridimensional scaffolds are of great value compared to the bidimensional types because they can collaborate in healing response and also they have alignment effect more than bidimensional types [14,9].”
BackgroundJean, A., & Engelmayr, G. C. (2011) · Advanced Healthcare Materials · doi:10.1002/adhm.201100017 · Cited by 9
A perforated microhole-based microfluidic device for improving sprouting angiogenesis in vitro
Chen, S., Zhang, L., Zhao, Y., Ke, M., Li, B., Chen, L., & Cai, S. (2017) · Biomicrofluidics · doi:10.1063/1.4994599 · Cited by 9
Terazawa, T., Furukoshi, M., & Nakayama, Y. (2018) · Hernia · doi:10.1007/s10029-018-1866-1 · Cited by 9
Matrigel patterning reflects multicellular contractility
Méhes, E., Biri‐Kovács, B., Isai, D. G., Gulyás, M., Nyitray, L., & Czirók, A. (2019) · PLoS Computational Biology · doi:10.1371/journal.pcbi.1007431 · Cited by 9
“The 200 Pa yield stress of Matrigel [47] is thirty times lower than the 6 kPa yield stress of a type I collegen gel at 2 mg/ml concentration [48].”
BackgroundAdvancing Ultrasound Technologies for Tissue Engineering
Dalecki, D., & Hocking, D. C. (2015) · Springer eBooks · doi:10.1007/978-981-287-470-2_28-1 · Cited by 9
“Importantly, the physical and biological properties of fibrillar collagens are strongly tied to variations in collagen fiber structure [43–45].”
BackgroundAvalanche process of the fiber-bundle model with stick-slip dynamics and a variable Young modulus
Hao, D., Tang, G., Xia, H., Xun, Z., & Han, K. (2013) · Physical Review E · doi:10.1103/physreve.87.042126 · Cited by 9
Gkretsi, V., Stylianou, A., Kalli, M., Louca, M., Voutouri, C., Zaravinos, A., & Stylianopoulos, T. (2020) · Anticancer Research · doi:10.21873/anticanres.14079 · Cited by 9
Supramolecular Hydrogels for Regenerative Medicine
Pape, A. C. H., & Dankers, P. Y. W. (2015) · Advances in polymer science · doi:10.1007/978-3-319-15404-6_7 · Cited by 9
Mechanical properties of layered poly (ethylene glycol) gels.
Skornia, S. L., Bledsoe, J. G., Kelso, B., & Willitz, R. K. (2007) · PubMed · Cited by 9
Hong, H., Kim, J., Cho, H.-S., Park, S. M., Jeon, M., Kim, H. K., & Kim, D. S. (2020) · Biofabrication · doi:10.1088/1758-5090/abb52a · Cited by 9
A model of viscoelastoplasticity in the cochleo‐saccular membranes
Pender, D. J. (2019) · Laryngoscope Investigative Otolaryngology · doi:10.1002/lio2.318 · Cited by 8
“METHODS An in vitro extra-cellular matrix of precipitated collagen was evaluated as a possible model of the cochleosaccular vestibular membranes.(2) The physical structure of the precipitate was compared to the known structure of the basal lamina of the vestibular membranes in the cochlea”
MethodResultInfluentialDense collagen-based scaffolds for soft tissue engineering applications
Park, H., Rosenzweig, D. H., & Nazhat, S. N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820508-2.00010-6 · Cited by 8
Hong, H., Eom, S., Lee, S. J., Youn, J., Kim, D., Chong, H. B., & Kim, D. S. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-021-00615-w · Cited by 8
Vidmar, C. S., Bazzi, M. S., & Lai, V. K. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105107 · Cited by 8
Aguilar, J., Malacrida, L. S., Günther, G., Torrado, B., Torres, V. I., Urbano, B. F., & Sánchez, S. A. (2023) · Biochimica et Biophysica Acta (BBA) - Biomembranes · doi:10.1016/j.bbamem.2023.184176 · Cited by 8
Effect of random fiber networks on bubble growth in gelatin hydrogels
Hasan, F., Mahmud, K. A. H. A., Khan, M. I., Kang, W., & Adnan, A. (2021) · Soft Matter · doi:10.1039/d1sm00587a · Cited by 8
“A similar failure strain is reported for collagen gels as well [44], [84].”
BackgroundBlanchard, B. (2023) · theses.fr (ABES) · doi:10.70675/c54f2426zbe30z4fe3z83f5z9a6f944e399b · Cited by 8
The role of collagen in mechanotransduction and its influence on bone metabolic activity
Li, M., Liu, X., Tian, E., & Liao, W. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144968 · Cited by 7
Multi-scale modeling of the lamellar unit of arterial media
Mozafari, H., Wang, L., Lei, Y., & Gu, L. (2019) · Nanotechnology Reviews · doi:10.1515/ntrev-2019-0048 · Cited by 7
Akoa, D. M., Sicard, L., Hélary, C., Torrens, C., Baroukh, B., Poliard, A., & Coradin, T. (2024) · Gels · doi:10.3390/gels10020130 · Cited by 7
Elastocapillary effects determine early matrix deformation by glioblastoma cell spheroids
Ang, I., Yousafzai, M. S., Yadav, V., Mohler, K., Rinehart, J., Bouklas, N., & Murrell, M. P. (2024) · APL Bioengineering · doi:10.1063/5.0191765 · Cited by 7
“92 This may serve to counteract the decrease in migration at the single cell level that occurs with YU252 treatment.”
BackgroundTopical Fish Oil Application Coupling with Therapeutic Ultrasound Improves Tendon Healing
Chan, K. O. W., Tong, H. H. Y., & Ng, G. Y. F. (2016) · Ultrasound in Medicine & Biology · doi:10.1016/j.ultrasmedbio.2016.08.018 · Cited by 7
Zhai, C., Sullivan, P. A., Martin, C. L., Shi, H., Deravi, L. F., & Yeo, J. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb01360f · Cited by 7
Electrical stimulation via repeated biphasic conducting materials for peripheral nerve regeneration
Rosenbalm, T. N., Levi, N., Morykwas, M. J., & Wagner, W. D. (2023) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-023-06763-x · Cited by 7
“Comparison of ultimate stress showed that stresses for PGS and PGSA samples were at least 10x greater than collagen and 4x greater than PGS-cinnamate [95, 99].”
BackgroundThe efficacy of image correlation spectroscopy for characterization of the extracellular matrix
Mir, S. M., Baggett, B. K., & Utzinger, U. (2012) · Biomedical Optics Express · doi:10.1364/boe.3.000215 · Cited by 7
Obstruction-Induced Pulmonary Vascular Remodeling
Chow, M.-J., Zou, Y., He, H., McGowan, F. X. J., Zurakowski, D., & Zhang, Y. (2011) · Journal of Biomechanical Engineering · doi:10.1115/1.4005301 · Cited by 7
“With an increase in total collagen, various soft tissues display an increase in stiffness [32,49,50].”
Shen, Y., Shah, S. R., Zhao, K., & Han, B. (2023) · Extreme Mechanics Letters · doi:10.1016/j.eml.2023.102025 · Cited by 6
Yan, Y., Wang, Y., Chu, J. S. F., Yang, L., Li, X., & Li, S. (2025) · Cells · doi:10.3390/cells14080611 · Cited by 6
“…gel, 500 µ m thick collagen-I gels were prepared by polymerizing 1 mL of neutralized collagen-I solution per well in 24-well plates at 37 ◦ C for 1 h. Based on the published characterization of this concentration and polymerization protocol, these gels exhibit a Young’s modulus of 1 kPa [23,24].”
Pierre, V., Wu, D. H., Liu, C., Ertugral, E. G., Kothapalli, C. R., & Senyo, S. E. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1579246 · Cited by 6
“In contrast, collagen in basic pH form thinner fi brils which may make them more susceptible to enzymatic activity (Roeder et al., 2002).”
Szarek, P., & Ruberti, J. W. (2026) · Sub-cellular biochemistry/Subcellular biochemistry · doi:10.1007/978-3-032-05273-5_10 · Cited by 6
Salinas‐Fernandez, S., Garcia, O., Kelly, D. J., & Buckley, C. T. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37634 · Cited by 6
Wu, M., Sapin‐Minet, A., Stefan, L., Perrin, J., Fries, I., & Gaucher, C. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.125126 · Cited by 6
Strain localization and yielding dynamics in disordered collagen networks
Bakshi, S., Vm, V., Sarkar, R., & Majumdar, S. (2021) · Soft Matter · doi:10.1039/d1sm00300c · Cited by 6
“Polymerization time and network architecture strongly depends on the parameters like temperature [39–41], pH [42–44], ionic concentration [44, 45].”
BackgroundParadiso, F., Quintela, M., Lenna, S., Serpelloni, S., James, D., Caserta, S., Conlan, R. S., Francis, L. W., & Taraballi, F. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100450 · Cited by 6
Biomechanics of cell reorientation in a three-dimensional matrix under compression
Yang, L., Carrington, L. J., Erdoğan, B., Ao, M., Brewer, B. M., Webb, D. J., & Li, D. (2016) · Experimental Cell Research · doi:10.1016/j.yexcr.2016.12.002 · Cited by 6
Doroteo, M. C., Salgado, R. M., Pérez‐González, J., Marín‐Santibáñez, B. M., & Krötzsch, E. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.03.042 · Cited by 6
Multi-scale Mechanics of Collagen Networks: Biomechanical Basis of Matrix Remodeling in Cancer
Ferruzzi, J., Zhang, Y., Roblyer, D. M., & Zaman, M. H. (2019) · Studies in mechanobiology, tissue engineering and biomaterials · doi:10.1007/978-3-030-20182-1_11 · Cited by 6
Androjna, C., Spragg, R. K., & Derwin, K. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.13.ft-331 · Cited by 6
Three Dimensional Cell Culture: The Importance of Microenvironment in Regulation of Function
Lelièvre, S. A., & Bissell, M. J. (2006) · Wiley-VCH eBooks · doi:10.1002/3527600906.mcb.200500013 · Cited by 6
Biological Matter in Microfluidic Environment - from Single Molecules to Self-Assembly
Köster, S. (2006) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-2688 · Cited by 6
Shin, S., Hahm, Y., Jeong, Y., Kim, Y., Park, J., Yang, J. H., Kim, J.-A., Won, J., Chung, S. H., & Lee, J.-Y. (2026) · Lab on a Chip · doi:10.1039/d5lc00278h · Cited by 5
Bernheim-Dennery, M., Gérémie, L., Brun, J., Chassatte, L., Gropplero, G., Bouras, R., Choo, J., Cinquin, B. P., Marcellan, A., Vignjevic, D. M., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505483 · Cited by 5
“This softening likely reflects internal fiber rearrangements within the polymer networks, leading to a new mechanical equilibrium as previously observed for collagen gels [29, 43].”
Bublikova, A., Schütte, F., & Mayr, S. G. (2024) · Materials Advances · doi:10.1039/d3ma01111a · Cited by 5
Physical limits to sensing material properties
Beroz, F., Zhou, D., Mao, X., & Lubensky, D. K. (2020) · Nature Communications · doi:10.1038/s41467-020-18995-4 · Cited by 5
Tan, E. Y. S., Sing, S. L., & Yeong, W. Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102561-1.00027-0 · Cited by 5
Using Acoustic Fields to Fabricate ECM-Based Biomaterials for Regenerative Medicine Applications
Norris, E. G., Dalecki, D., & Hocking, D. C. (2020) · Recent Progress in Materials · doi:10.21926/rpm.2003018 · Cited by 5
Nolte, D. D. (2011) · Springer eBooks · doi:10.1007/978-1-4614-0890-1_12 · Cited by 5
Oñate, E., Bellomo, F. J., Monteiro, V. S. A., Oller, S., & Nallim, L. G. (2013) · Wiley eBooks · doi:10.1002/9781118402955.ch15 · Cited by 5
“[3] studied the structural–mechanical relationship of three-dimensional type I collagen matrices prepared in vitro.”
Greenwald, S., Brown, A., Roberts, A., & Clubb, F. J. (2013) · Handbook series for mechanical engineering/Mechanical engineering handbook series · doi:10.1201/b15085-17 · Cited by 5
Metadata
- Authors
- Roeder, B. A., Kokini, K., Sturgis, J. E., Robinson, J. P., & Voytik-Harbin, S. L.
- Affiliations
- Purdue University West Lafayette (US)
- Department of Basic Medical Sciences/Department of Biomedical Engineering, Purdue University, West Lafayette, IN 47907-1515
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 2002-03-29
- Volume
- 124
- Issue
- 2
- Pages
- 214-222
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2133809313
- Semantic Scholar
- 6d026775d9662abbe0965c21925caeb1f0a96e7c
- Cited by
- 620
- References
- 41
- Citations by year
- 2026: 13 · 2025: 21 · 2024: 16 · 2023: 23 · 2022: 24 · 2021: 29 · 2020: 34 · 2019: 40 · 2018: 24 · 2017: 32 · 2016: 33 · 2015: 42 · 2014: 37 · 2013: 40 · 2012: 33
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- Division of Graduate Education
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- type I collagen, extracellular matrix, collagen fibrils, tensile properties, collagen content, fibril diameter, fibril length, strain rate sensitivity, stress-strain behavior, tissue engineering scaffolds, cell-matrix interactions, mechanotransduction
- MeSH terms
- Animals, Cattle, Elasticity, Extracellular Matrix, Hydrogen-Ion Concentration, Microscopy, Interference, Models, Biological, Polymers, Sensitivity and Specificity, Stress, Mechanical, Tensile Strength, Reproducibility of Results, Microscopy, Confocal, Collagen Type I, In Vitro Techniques
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.