Tensile Mechanical Properties of Three-Dimensional Type I Collagen Extracellular Matrices With Varied Microstructure
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
The importance and priority of specific micro-structural and mechanical design parameters must be established to effectively engineer scaffolds (biomaterials) that mimic the extracellular matrix (ECM) environment of cells and have clinical applications as tissue substitutes. In this study, three-dimensional (3-D) matrices were prepared from type I collagen, the predominant compositional and structural component of connective tissue ECMs, and structural-mechanical relationships were studied. Polymerization conditions, including collagen concentration (0.3–3 mg/mL) and pH (6–9), were varied to obtain matrices of collagen fibrils with different microstructures. Confocal reflection microscopy was used to assess specific micro-structural features (e.g., diameter and length) and organization of component fibrils in 3-D. Microstructural analyses revealed that changes in collagen concentration affected fibril density while maintaining a relatively constant fibril diameter. On the other hand, both fibril length and diameter were affected by the pH of the polymerization reaction. Mechanically, all matrices exhibited a similar stress-strain curve with identifiable “toe,” “linear,” and “failure” regions. However, the linear modulus and failure stress increased with collagen concentration and were correlated with an increase in fibril density. Additionally, both the linear modulus and failure stress showed an increase with pH, which was related to an increased fibril length and a decreased fibril diameter. The tensile mechanical properties of the collagen matrices also showed strain rate dependence. Such fundamental information regarding the 3-D microstructural-mechanical properties of the ECM and its component molecules are important to our overall understanding of cell-ECM interactions (e.g., mechanotransduction) and the development of novel strategies for tissue repair and replacement.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140108 · Cited by 1,044
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140314 · Cited by 889
[2] Preparation and characterization of the different types of collagen
Miller, E. J., & Kent Rhodes, R. (1982) · Methods in Enzymology · doi:10.1016/0076-6879(82)82059-4 · Cited by 752
Collagen; ultrastructure and its relation to mechanical properties as a function of ageing
Diamant, J., Keller, A., Baer, E., Litt, M., & Arridge, R. G. C. (1972) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1972.0019 · Cited by 553
Isometric contraction by fibroblasts and endothelial cells in tissue culture: a quantitative study
Kolodney, M., & Wysolmerski, R. (1992) · The Journal of cell biology · doi:10.1083/jcb.117.1.73 · Cited by 447
Wood, G. C., & Keech, M. K. (1960) · Biochemical Journal · doi:10.1042/bj0750588 · Cited by 443
Regulation of extracellular matrix gene expression by mechanical stress
Chiquet, M. (1999) · Matrix Biology · doi:10.1016/s0945-053x(99)00039-6 · Cited by 427
Pins, G. D., Christiansen, D. L., Patel, R., & Silver, F. H. (1997) · Biophysical Journal · doi:10.1016/s0006-3495(97)78247-x · Cited by 390
Research works printed but not linked: 1
- Bateman, J. F., Lamande, S. R., and Ramshaw, J. A. M., 1996, “Collagen Superfamily,” Extracellular Matrix Vol. 2., Molecular Components and Interaction, ed., W. D. Comper, Harwood Academic Publishers, The Netherlands, pp. 22–67.
Cited by
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
“…Sweeney,1 and Dennis E. Discher1,2,3,4,* 1Pennsylvania Muscle Institute 2School of Engineering and Applied Science 3Cell & Molecular Biology Graduate Group 4Physics Graduate Group University of Pennsylvania, Philadelphia, PA 19104, USA *Contact: discher@seas.upenn.edu DOI 10.1016/j.cell.2006.06.044”
BackgroundInfluentialRezakhaniha, R., Agianniotis, A., Schrauwen, J. T. C., Griffa, A., Sage, D., Bouten, C. V. C., van de Vosse, F. N., Unser, M., & Stergiopulos, N. (2012) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-011-0325-z · Cited by 1,096
“Techniques for 3D visualization of collagen without specific probes include auto-fluorescence , confocal reflection microscopy (Roeder et al. 2002), and second harmonic generation using femtosecond pulsed infrared excitation (Boulesteix et al. 2006).”
BackgroundScaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Fibroblast biology in three-dimensional collagen matrices
Grinnell, F. (2003) · Trends in Cell Biology · doi:10.1016/s0962-8924(03)00057-6 · Cited by 819
Provenzano, P. P., Inman, D. R., Eliceiri, K. W., & Keely, P. J. (2009) · Oncogene · doi:10.1038/onc.2009.299 · Cited by 675
“These results suggest that increased resistance to matrix contraction regulates epithelial behavior, and further support the conclusion that the physical properties of the microenvironment are important regulators of epithelial phenotype.”
InfluentialSabeh, F., Shimizu-Hirota, R., & Weiss, S. J. (2009) · Journal of Cell Biology · doi:10.1083/jcb.200807195 · Cited by 658
“As collagen gel microstructure can be affected by temperature, pH, ionic strength, ion stoichiometry, and monomer concentration (Roeder et al., 2002; Raub et al., 2007, 2008), minor but significant changes in experimental conditions could affect results obtained by different laboratories.”
ResultRaeber, G. P., Lutolf, M. P., & Hubbell, J. A. (2005) · Biophysical Journal · doi:10.1529/biophysj.104.050682 · Cited by 573
“Fiber diameter was uniform and ;500 nm, which is in accordance with the literature (47).”
ResultChen, Q.-Z., Bismarck, A., Hansen, U., Junaid, S., Tran, M. Q., Harding, S. E., Ali, N. N., & Boccaccini, A. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.010 · Cited by 530
Schedin, P., & Keely, P. J. (2011) · Cold Spring Harbor Perspectives in Biology · doi:10.1101/cshperspect.a003228 · Cited by 524
“The tensional moduli of gels composed of predominantly collagen I have been reported (Roeder et al. 2002; Provenzano et al. 2009) and demonstrate that an increase in the concentration of collagen from 1.”
Background3D collagen alignment limits protrusions to enhance breast cancer cell persistence
Riching, K. M., Cox, B. L., Salick, M. R., Pehlke, C., Riching, A. S., Ponik, S. M., Bass, B. R., Crone, W. C., Jiang, Y., Weaver, A. M., et al. (2014) · Biophysical Journal · doi:10.1016/j.bpj.2014.10.035 · Cited by 446
Multiscale Mechanics of Fibrin Polymer: Gel Stretching with Protein Unfolding and Loss of Water
Brown, A. E. X., Litvinov, R. I., Discher, D. E., Purohit, P. K., & Weisel, J. W. (2009) · Science · doi:10.1126/science.1172484 · Cited by 416
Stress controls the mechanics of collagen networks
Licup, A. J., Münster, S., Sharma, A., Sheinman, M., Jawerth, L. M., Fabry, B., Weitz, D. A., & MacKintosh, F. C. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504258112 · Cited by 394
“[35] Roeder BA, Kokini K, Sturgis JE, Robinson JP, VoytikHarbin SL (2002) Tensile mechanical properties of threedimensional type I collagen extracellular matrices with varied microstructure.”
BackgroundMechanobiology in the Third Dimension
Pedersen, J. A., & Swartz, M. A. (2005) · Annals of Biomedical Engineering · doi:10.1007/s10439-005-8159-4 · Cited by 389
Strain-Induced Alignment in Collagen Gels
Vader, D., Kabla, A., Weitz, D., & Mahadevan, L. (2009) · PLoS ONE · doi:10.1371/journal.pone.0005902 · Cited by 389
“5μm for collagen fibrils [21]) and the stability of the network [31, 32] make it easy to handle and image over a range of spatial and temporal scales; e) fibrillogenesis is conveniently controlled in vitro by pH, temperature and concentration [26,28].”
BackgroundBrain tissue deforms similarly to filled elastomers and follows consolidation theory
Franceschini, G., Bigoni, D., Regitnig, P., & Holzapfel, G. A. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.05.004 · Cited by 385
Biomaterials in cardiac tissue engineering: Ten years of research survey
Chen, Q.-Z., Harding, S. E., Ali, N. N., Lyon, A. R., & Boccaccini, A. R. (2008) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.08.001 · Cited by 382
Natural Polymeric Scaffolds in Bone Regeneration
Filippi, M., Born, G., Chaaban, M., & Scherberich, A. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00474 · Cited by 376
“The polymerization conditions, such as pH, collagen type and concentration, affect the microstructure of the resulting matrices, acting on the fibril diameter and density (Roeder et al., 2002).”
BackgroundNoninvasive Assessment of Collagen Gel Microstructure and Mechanics Using Multiphoton Microscopy
Raub, C. B., Suresh, V., Krasieva, T., Lyubovitsky, J., Mih, J. D., Putnam, A. J., Tromberg, B. J., & George, S. C. (2007) · Biophysical Journal · doi:10.1529/biophysj.106.097998 · Cited by 374
“Recently, a study has correlated increased collagen concentration and polymerization pH with increasing hydrogel linear tensile modulus (77).”
BackgroundResultWnt Signaling Induces Matrix Metalloproteinase Expression and Regulates T Cell Transmigration
Wu, B., Crampton, S. P., & Hughes, C. C. W. (2007) · Immunity · doi:10.1016/j.immuni.2006.12.007 · Cited by 369
“…low concentration of collagen (1.67 mg/ml), whereas basement membrane and interstitial collagen are much denser (10–40 mg/ml [Helary et al., 2006; Roeder et al., 2002]), and migration through them may well require MMP expression, consistent with previous findings of a role for MMPs in T cell…”
BackgroundResultInfluentialHakkinen, K. M., Harunaga, J. S., Doyle, A. D., & Yamada, K. M. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0273 · Cited by 352
“The fibers in a fibrin matrix are typically thinner, shorter, and straighter than collagen fibers.(35) Polymerized fibrin was first used in 1998 as a scaffold for transplantation of tissue-engineered grafts in burns and chronic wounds.”
BackgroundCross, V. L., Zheng, Y., Won Choi, N., Verbridge, S. S., Sutermaster, B. A., Bonassar, L. J., Fischbach, C., & Stroock, A. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.072 · Cited by 344
“3), in good agreement with previously reported values [48].”
The materials science of collagen
Sherman, V. R., Yang, W., & Meyers, M. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.05.023 · Cited by 324
“Trelstad (1982) concluded that physical forces lead to the alignment of collagen structures, and Ruberti and Zieske (2008) have produced supporting evidence of this model by the creation of aligned collagen structures by simply confining monomer solutions between two featureless surfaces.”
BackgroundWong, J. Y., Leach, J. B., & Brown, X. Q. (2004) · Surface Science · doi:10.1016/j.susc.2004.06.186 · Cited by 323
Collagen- and hyaluronic acid-based hydrogels and their biomedical applications
Xu, Q., Torres, J. E., Hakim, M., Babiak, P. M., Pal, P., Battistoni, C. M., Nguyen, M., Panitch, A., Solorio, L., & Liu, J. C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100641 · Cited by 318
Long-range force transmission in fibrous matrices enabled by tension-driven alignment of fibers
Wang, H., Abhilash, A. S., Chen, C. S., Wells, R. G., & Shenoy, V. B. (2014) · Biophysical Journal · doi:10.1016/j.bpj.2014.09.044 · Cited by 313
“This “knee,” which according to our simulations requires the presence of the two families of fibers, is in good accord with experimental data (experiment, Ref (22) and Fig.”
ResultSarrigiannidis, S. O., Rey, J. M., Dobre, O., González-García, C., Dalby, M. J., & Salmeron-Sanchez, M. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100098 · Cited by 309
“Increasing concentration does not generally affect fibril diameter, which lie on the range between 270 and 290 nm [51,68,75, 76].”
BackgroundAdvanced Tools for Tissue Engineering: Scaffolds, Bioreactors, and Signaling
Freed, L. E., Guilak, F., Guo, X. E., Gray, M. L., Tranquillo, R., Holmes, J. W., Radisic, M., Sefton, M. V., Kaplan, D., & Vunjak-Novakovic, G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.3285 · Cited by 284
“85 While the authors’ intent was to provide information useful in the design of scaffolds for engineered tissues, this study also sheds light on the origin of mechanical properties in collagenous tissues with different microstructure.”
Strain history dependence of the nonlinear stress response of fibrin and collagen networks
Münster, S., Jawerth, L. M., Leslie, B. A., Weitz, J. I., Fabry, B., & Weitz, D. A. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1222787110 · Cited by 282
“All of these properties are delicately influenced by the structure of the networks, by the molecular interactions between monomers, and by the addition of covalent cross-links (7, 13, 14).”
Sieminski, A. L., Hebbel, R. P., & Gooch, K. J. (2004) · Experimental Cell Research · doi:10.1016/j.yexcr.2004.03.035 · Cited by 281
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Elastic Moduli of Collagen Gels Can Be Predicted from Two-Dimensional Confocal Microscopy
Yang, Y.-L., Leone, L. M., & Kaufman, L. J. (2009) · Biophysical Journal · doi:10.1016/j.bpj.2009.07.035 · Cited by 234
“We note that although 2D confocal imaging clearly does not reproduce the trend in fibril diameter as a function of collagen concentration shown by SEM, maximum fibril diameter overestimation as calculated with the method described here is significantly smaller than the apparent overestimation reported from direct meas…”
BackgroundMethodEndothelial actin and cell stiffness is modulated by substrate stiffness in 2D and 3D
Byfield, F. J., Reen, R. K., Shentu, T.-P., Levitan, I., & Gooch, K. J. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.02.012 · Cited by 230
The Role of Network Architecture in Collagen Mechanics
Jansen, K. A., Licup, A. J., Sharma, A., Rens, R., MacKintosh, F. C., & Koenderink, G. H. (2018) · Biophysical Journal · doi:10.1016/j.bpj.2018.04.043 · Cited by 229
Walters, B. D., & Stegemann, J. P. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.038 · Cited by 226
“Lower pH leads to more compliant materials with decreased fibril diameter [28, 29], possibly due to protonation of the COOH groups and a consequent reduction in interactions between the carboxyl and amino acid groups [30].”
Pore size variable type I collagen gels and their interaction with glioma cells
Yang, Y.-L., Motte, S., & Kaufman, L. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.039 · Cited by 224
Achilli, M., & Mantovani, D. (2010) · Polymers · doi:10.3390/polym2040664 · Cited by 214
“Some of them already pointed out that, regarding the process of self-assembly, the modulation of these parameters can determine modifications at the micro-structural level in terms of the fibril size and the electrostatic interactions between neighboring fibrils [20,21,23,33-35,38].”
InfluentialChandran, P. L., & Barocas, V. H. (2006) · Journal of Biomechanical Engineering · doi:10.1115/1.2165699 · Cited by 214
Ion-Mediated Gelation of Aqueous Suspensions of Cellulose Nanocrystals
Chau, M., Sriskandha, S. E., Pichugin, D., Thérien-Aubin, H., Nykypanchuk, D., Chauve, G., Méthot, M., Bouchard, J., Gang, O., & Kumacheva, E. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00701 · Cited by 214
Biomaterial strategies for alleviation of myocardial infarction
Venugopal, J. R., Prabhakaran, M. P., Mukherjee, S., Ravichandran, R., Dan, K., & Ramakrishna, S. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2011.0301 · Cited by 211
Sapudom, J., Rubner, S., Martin, S., Kurth, T., Riedel, S., Mierke, C. T., & Pompe, T. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.022 · Cited by 195
“In general our results agree with other reports that increasing pH correlates with a decreasing fibril diameter [31,32,40].”
ResultYang, Y.-L., & Kaufman, L. J. (2009) · Biophysical Journal · doi:10.1016/j.bpj.2008.10.063 · Cited by 195
“This is consistent with findings that fibril diameter is set during the nucleation phase by the shape of nuclei, which is not expected to depend strongly on concentration (10,68).”
Abhilash, A. S., Baker, B. M., Trappmann, B., Chen, C. S., & Shenoy, V. B. (2014) · Biophysical Journal · doi:10.1016/j.bpj.2014.08.029 · Cited by 192
“density of a square sample of the fibrous material in simple shear at a strain of 10% is~ 50!!/!! . 2 The characteristic strain at which the gels stiffens. For collagen in tensile loading, its ~ 10% [39]. 9 Figure 4: Plot of the ratios of stretching to bending energies (! ! = ! !"#$"%&/! !"#$) as a…”
BackgroundAhmadzadeh, H., Webster, M. R., Behera, R., Jimenez Valencia, A. M., Wirtz, D., Weeraratna, A. T., & Shenoy, V. B. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1617037114 · Cited by 191
“When the local strain in the matrix is tensile and is above a critical threshold («cr ∼ 5%), the fibrous matrix becomes considerably aligned (anisotropic) and undergoes “strain stiffening” in the direction of the maximum principal strain (29, 30) (Fig.”
BackgroundImage Correlation Spectroscopy of Multiphoton Images Correlates with Collagen Mechanical Properties
Raub, C. B., Unruh, J., Suresh, V., Krasieva, T., Lindmo, T., Gratton, E., Tromberg, B. J., & George, S. C. (2008) · Biophysical Journal · doi:10.1529/biophysj.107.120006 · Cited by 188
“Thus, it is likely that the decreased monomer stability and attraction at lower pH, which correlates with increased lateral monomer association in fibrils and increased fibril diameter (45,48), allows increased lateral association of fibrils into larger-diameter fibers, possibly through increased attractive forces bet…”
BackgroundResultVolume-averaging theory for the study of the mechanics of collagen networks
Stylianopoulos, T., & Barocas, V. H. (2007) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2006.06.019 · Cited by 187
“Thus, the present model is best suited to extension tests on acellular gels [28,43].”
BackgroundMethodInfluentialAbdelaziz, A. G., Nageh, H., Abdo, S. M., Abdalla, M. S., Amer, A. A., Abdal-hay, A., & Barhoum, A. (2023) · Bioengineering · doi:10.3390/bioengineering10020204 · Cited by 182
“However, the use of synthetic polymers in biomedical applications also has some drawbacks, such as their considerable hydrophobic nature, which affects their ability to transport hydrophilic drugs, the striking irregular degradation behavior due to a phenomenon called autocatalysis, and the denaturation of biologicall…”
BackgroundStrain stiffening in collagen I networks
Motte, S., & Kaufman, L. J. (2013) · Biopolymers · doi:10.1002/bip.22133 · Cited by 181
Kuo, C. K., Marturano, J. E., & Tuan, R. S. (2010) · BMC Sports Science, Medicine and Rehabilitation · doi:10.1186/1758-2555-2-20 · Cited by 179
“Unfortunately, no method yet exists to organize and crosslink collagen fibers in a cytocompatible manner, and as such collagen gels remain exceptionally weak with typical elastic moduli between 10-30 kPa and ultimate tensile strengths between 5-10 kPa [41].”
Self-assembled collagen–human mesenchymal stem cell microspheres for regenerative medicine
Chan, B. P., Hui, T. Y., Yeung, C. W., Li, J., Mo, I., & Chan, G. C. F. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.041 · Cited by 174
“The mechanical properties of the collagen gel so formed are dependent on the collagen monomer concentration [36,37].”
BackgroundMechanisms of Plastic Deformation in Collagen Networks Induced by Cellular Forces
Ban, E., Franklin, J. M., Nam, S., Smith, L., Wang, H., Wells, R. G., Chaudhuri, O., Liphardt, J., & Shenoy, V. B. (2018) · Biophysical Journal · doi:10.1016/j.bpj.2017.11.3739 · Cited by 169
Kreger, S. T., Bell, B. J., Bailey, J., Stites, E., Kuske, J., Waisner, B., & Voytik‐Harbin, S. L. (2010) · Biopolymers · doi:10.1002/bip.21431 · Cited by 147
Self-citationThe micromechanics of three‐dimensional collagen‐I gels
Stein, A. M., Vader, D., Weitz, D. A., & Sander, L. M. (2010) · Complexity · doi:10.1002/cplx.20332 · Cited by 168
“In Figure 3(b), we compare the previously reported tensile modulus of large samples that are centimeters in length [28] to”
BackgroundInfluentialChandran, P. L., & Barocas, V. H. (2004) · Journal of Biomechanical Engineering · doi:10.1115/1.1688774 · Cited by 153
Pizzo, A. M., Kokini, K., Vaughn, L. C., Waisner, B. Z., & Voytik-Harbin, S. L. (2005) · Journal of Applied Physiology · doi:10.1152/japplphysiol.01137.2004 · Cited by 167
Self-citationChanges in the Mechanical and Biochemical Properties of Aortic Tissue due to Cold Storage
Chow, M.-J., & Zhang, Y. (2010) · Journal of Surgical Research · doi:10.1016/j.jss.2010.04.007 · Cited by 167
Decaestecker, C., Debeir, O., Van Ham, P., & Kiss, R. (2007) · Medicinal Research Reviews · doi:10.1002/med.20078 · Cited by 165
“A Furthermore, it is known that variations in polymerization conditions of these materials, and in particular in the case of collagen, may generate matrices with different microstructures in terms of fibril density, length, and diameter.(142) However, little is known regarding the mechanisms by which specific structur…”
BackgroundMaterial approaches to active tissue mechanics
Xi, W., Saw, T. B., Delacour, D., Lim, C. T., & Ladoux, B. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0066-z · Cited by 161
The Mechanics of Single Cell and Collective Migration of Tumor Cells
Lintz, M., Muñoz, A., & Reinhart-King, C. A. (2017) · Journal of Biomechanical Engineering · doi:10.1115/1.4035121 · Cited by 160
“Pore size and fiber size can be tuned based on temperature and pH at the time of polymerization [120,121].”
BackgroundSung, K. E., Su, G., Pehlke, C., Trier, S. M., Eliceiri, K. W., Keely, P. J., Friedl, A., & Beebe, D. J. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.043 · Cited by 159
Fibroblasts and the Ground They Walk On
Tschumperlin, D. J. (2013) · Physiology · doi:10.1152/physiol.00024.2013 · Cited by 123
Reese, S. P., Underwood, C. J., & Weiss, J. A. (2013) · Matrix Biology · doi:10.1016/j.matbio.2013.04.004 · Cited by 157
“Engineering stress was chosen as it is more commonly reported in the literature, thus allowing the direct comparison of stress–strain data (Roeder et al., 2002, 2009).”
InfluentialSander, E. A., Stylianopoulos, T., Tranquillo, R. T., & Barocas, V. H. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0903716106 · Cited by 145
“Using data from a similar experiment where uniaxial testing was conducted on acellular collagen gels (20), we estimated only a 5% difference in linear modulus for these strain rates (17.”
MethodCooling-/water-responsive shape memory hybrids
Wang, C. C., Huang, W. M., Ding, Z., Zhao, Y., & Purnawali, H. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.03.027 · Cited by 148
“5 MPa [22,23], from 2 MPa to 46 MPa [24,25], and from 2 kPa to 22 kPa [26], respectively.”
BackgroundEvaluation of composition and crosslinking effects on collagen-based composite constructs
Madhavan, K. P. C., Belchenko, D. D., Motta, A., & Tan, W. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.028 · Cited by 147
“Hydrated reconstituted collagen matrices are mechanically weak and stiff [15–18].”
BackgroundInfluence of Crosslink Density and Stiffness on Mechanical Properties of Type I Collagen Gel
Lin, S., & Gu, L. (2015) · Materials · doi:10.3390/ma8020551 · Cited by 119
“[6] was simulated using our RVE model subjected to 40% strain along x-direction as shown in Figure 2a.”
MethodSieminski, A. L., Was, A. S., Kim, G., Gong, H., & Kamm, R. D. (2007) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-007-0046-1 · Cited by 146
“While changing material stiffness by changing concentration is a simple experimental approach that has been used for ECM gels as well [17, 22, 42, 43] and our results support an explanation based on stiffness, it is important to note that other matrix properties may also be changing with concentration.”
ResultFiber alignment drives changes in architectural and mechanical features in collagen matrices
Taufalele, P., VanderBurgh, J. A., Muñoz, A., Zanotelli, M. R., & Reinhart‐King, C. A. (2019) · PLoS ONE · doi:10.1371/journal.pone.0216537 · Cited by 146
Jang, J., Min, K.-E., Kim, C., Shin, J.-S., Lee, J., & Yi, S. (2023) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00755-7 · Cited by 145
Modeling Morphogenesis and Oncogenesis in Three-Dimensional Breast Epithelial Cultures
Hebner, C., Weaver, V. M., & Debnath, J. (2008) · Annual Review of Pathology: Mechanisms of Disease · doi:10.1146/annurev.pathmechdis.3.121806.151526 · Cited by 122
Collagen matrix physical properties modulate endothelial colony forming cell-derived vessels in vivo
Critser, P. J., Kreger, S. T., Voytik‐Harbin, S. L., & Yöder, M. C. (2010) · Microvascular Research · doi:10.1016/j.mvr.2010.03.001 · Cited by 142
Self-citationDense fibrillar collagen is a potent inducer of invadopodia via a specific signaling network
Artym, V. V., Swatkoski, S., Matsumoto, K., Campbell, C. B., Petrie, R. J., Dimitriadis, E. K., Li, X., Mueller, S. C., Bugge, T. H., Gucek, M., et al. (2015) · Journal of Cell Biology · doi:10.1083/jcb.201405099 · Cited by 126
“Increased collagen density renders fibrillar collagen matrix stiffer (Roeder et al., 2002).”
BackgroundEdgar, L. T., Underwood, C. J., Guilkey, J. E., Hoying, J. B., & Weiss, J. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0085178 · Cited by 133
In vitro 3D corneal tissue model with epithelium, stroma, and innervation
Wang, S., Ghezzi, C. E., Gomes, R., Pollard, R. E., Funderburgh, J. L., & Kaplan, D. L. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.030 · Cited by 139
“Compared to collagen-based corneal tissue models with innervation [15,42], the silk protein provided tunable materials to match the mechanical properties of human cornea [17,26,43].”
Biomechanical and biochemical characteristics of a human fibroblast-produced and remodeled matrix
Ahlfors, J.-E. W., & Billiar, K. L. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.030 · Cited by 136
A Cellular Potts model simulating cell migration on and in matrix environments
Scianna, M., Preziosi, L., & Wolf, K. (2012) · Mathematical Biosciences & Engineering · doi:10.3934/mbe.2013.10.235 · Cited by 134
“6 [μm (2)] [1] VF surface of matrix fibers 20 [μm (2)] [8, 63, 65] SF length of matrix fibers 20 [μm] [8, 63, 65] ε coefficient of Boltzmann probability 1 TN motility of nucleus 0.”
BackgroundBio-functionalized silk hydrogel microfluidic systems
Zhao, S., Chen, Y. G., Partlow, B. P., Golding, A. S., Tseng, P., Coburn, J. M., Applegate, M. B., Moreau, J. E., Omenetto, F. G., & Kaplan, D. L. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.03.041 · Cited by 134
“tunable ranges of existing microfluidic hydrogel ma terials [24, 66-75] (row 3 in Table 1).”
BackgroundBauer, J., Emon, M. A. B., Staudacher, J. J., Thomas, A. L., Zessner-Spitzenberg, J., Mancinelli, G., Krett, N., Saif, M. T., & Jung, B. (2020) · Scientific Reports · doi:10.1038/s41598-019-55687-6 · Cited by 133
Interpenetrating Collagen-Fibrin Composite Matrices with Varying Protein Contents and Ratios
Rowe, S. L., & Stegemann, J. P. (2006) · Biomacromolecules · doi:10.1021/bm0602233 · Cited by 131
Tailoring material properties of a nanofibrous extracellular matrix derived hydrogel
Johnson, T. D., Lin, S. Y., & Christman, K. L. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/49/494015 · Cited by 115
Chintapalli, R. K., Mirkhalaf, M., Dastjerdi, A. K., & Barthelat, F. (2014) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/9/3/036005 · Cited by 128
The Role of Extracellular Matrix in Glioma Invasion: A Cellular Potts Model Approach
Rubenstein, B. M., & Kaufman, L. J. (2008) · Biophysical Journal · doi:10.1529/biophysj.108.140624 · Cited by 128
Competent processing techniques for scaffolds in tissue engineering
Dutta, R. C., Dey, M., Dutta, A. K., & Basu, B. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.01.001 · Cited by 127
The Interplay of Cell-Cell and Cell-Matrix Interactions in the Invasive Properties of Brain Tumors
Hegedűs, B., Marga, F. S., Jakab, K., Sharpe-Timms, K. L., & Forgács, G. (2006) · Biophysical Journal · doi:10.1529/biophysj.105.077834 · Cited by 127
“5) and thus on the gel’s mechanical properties (39).”
BackgroundFilamin A–β1 Integrin Complex Tunes Epithelial Cell Response to Matrix Tension
Gehler, S., Baldassarre, M., Lad, Y., Leight, J. L., Wozniak, M. A., Riching, K. M., Eliceiri, K. W., Weaver, V. M., Calderwood, D. A., & Keely, P. J. (2009) · Molecular Biology of the Cell · doi:10.1091/mbc.e08-12-1186 · Cited by 108
“It has been demonstrated that the stiffness of a collagen matrix increases with increasing collagen concentration (Roeder et al., 2002; Paszek et al., 2005).”
BackgroundResultInfluentialMotta, P. J., Habegger, M. L., Lang, A., Hueter, R. E., & Davis, J. L. (2012) · Journal of Morphology · doi:10.1002/jmor.20047 · Cited by 125
Podosomes in space: Macrophage migration and matrix degradation in 2D and 3D settings
Wiesner, C., Cabec, V. L., Azzouzi, K. E., Maridonneau‐Parini, I., & Linder, S. (2014) · Cell Adhesion & Migration · doi:10.4161/cam.28116 · Cited by 123
Terzi, A., Storelli, E., Bettini, S., Sibillano, T., Altamura, D., Salvatore, L., Madaghiele, M., Romano, A., Siliqi, D., Ladisa, M., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-19786-0 · Cited by 122
A minimal-length approach unifies rigidity in underconstrained materials
Merkel, M., Baumgarten, K., Tighe, B. P., & Manning, M. L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1815436116 · Cited by 120
“For example for biopolymer networks, properties of the local geometric structure can be extracted using light scattering, scanning electron microscopy, or confocal reflectance microscopy (21, 68, 69).”
MethodCharacterization of type I collagen gels modified by glycation
Francis-Sedlak, M. E., Uriel, S., Larson, J. C., Greisler, H. P., Venerus, D. C., & Brey, E. M. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.014 · Cited by 119
“studies have primarily focused on varying ECM properties by increasing protein concentration [5] or incorporating additional proteins into the gels [6].”
Stuart, K., & Panitch, A. (2008) · Biopolymers · doi:10.1002/bip.21024 · Cited by 100
Direct, dynamic assessment of cell‐matrix interactions inside fibrillar collagen lattices
Petroll, W. M., & Ma, L. (2003) · Cell Motility and the Cytoskeleton · doi:10.1002/cm.10126 · Cited by 117
Tsai, S., Liou, H., Lin, C., Kuo, K.-L., Hung, Y.-S., Weng, R.-C., & Hsu, F. (2012) · PLoS ONE · doi:10.1371/journal.pone.0031200 · Cited by 114
“The ‘‘toe region’’ was the zone between zero strain and the intersection of the slope of the linear region of stress-strain curve on the horizontal axis (strain) [29].”
BackgroundGrinnell, F., Rocha, L. B., Iucu, C., Rhee, S., & Jiang, H. (2005) · Experimental Cell Research · doi:10.1016/j.yexcr.2005.10.001 · Cited by 112
Extracellular Matrix Stiffness in Lung Health and Disease
Guo, T., He, C., Venado, A. E., & Zhou, Y. (2022) · Comprehensive physiology · doi:10.1002/cphy.c210032 · Cited by 112
Toward single cell traction microscopy within 3D collagen matrices
Hall, M. S., Long, R., Feng, X., Huang, Y., Hui, C.-Y., & Wu, M. (2013) · Experimental Cell Research · doi:10.1016/j.yexcr.2013.06.009 · Cited by 95
“Recent advances in collagen material characterization have been made possible by the parallel measurements of bulk mechanical material properties at the macro-scale with visualization of the collagen fibers at the micro-scale [73-75, 81, 83, 99, 100].”
Water-triggered shape memory of multiblock thermoplastic polyurethanes (TPUs)
Gu, X., & Mather, P. T. (2013) · RSC Advances · doi:10.1039/c3ra41337c · Cited by 102
Nonlinear mechanics of soft fibrous networks
Kabla, A., & Mahadevan, L. (2006) · Journal of The Royal Society Interface · doi:10.1098/rsif.2006.0151 · Cited by 106
“In these systems, a natural question is the origin of the striking nonlinear mechanical behaviour observed in biaxial tests (Sacks 2000; Roeder et al. 2004a) and rheological measurements (Gardel et al. 2004; Storm et al. 2005).”
BackgroundResultVeeruraj, A., Liu, L., Zheng, J., Wu, J., & Arumugam, M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.055 · Cited by 105
Structure–property relationships of a biopolymer network: The eggshell membrane
Torres, F. G., Troncoso, O. P., Piaggio, F., & Hijar, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.03.014 · Cited by 105
Fibrillogenesis in continuously spun synthetic collagen fiber
Caves, J. M., Kumar, V., Wen, J., Cui, W., Martinez, A. W., Apkarian, R. P., Coats, J. E., Berland, K. M., & Chaikof, E. L. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31555 · Cited by 105
Metadata
- Authors
- Roeder, B. A., Kokini, K., Sturgis, J. E., Robinson, J. P., & Voytik-Harbin, S. L.
- Affiliations
- Purdue University West Lafayette (US)
- Department of Basic Medical Sciences/Department of Biomedical Engineering, Purdue University, West Lafayette, IN 47907-1515
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 2002-03-29
- Volume
- 124
- Issue
- 2
- Pages
- 214-222
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2133809313
- Semantic Scholar
- 6d026775d9662abbe0965c21925caeb1f0a96e7c
- Cited by
- 620
- References
- 41
- Citations by year
- 2026: 13 · 2025: 21 · 2024: 16 · 2023: 23 · 2022: 24 · 2021: 29 · 2020: 34 · 2019: 40 · 2018: 24 · 2017: 32 · 2016: 33 · 2015: 42 · 2014: 37 · 2013: 40 · 2012: 33
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- Division of Graduate Education
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- type I collagen, extracellular matrix, collagen fibrils, tensile properties, collagen content, fibril diameter, fibril length, strain rate sensitivity, stress-strain behavior, tissue engineering scaffolds, cell-matrix interactions, mechanotransduction
- MeSH terms
- Animals, Cattle, Elasticity, Extracellular Matrix, Hydrogen-Ion Concentration, Microscopy, Interference, Models, Biological, Polymers, Sensitivity and Specificity, Stress, Mechanical, Tensile Strength, Reproducibility of Results, Microscopy, Confocal, Collagen Type I, In Vitro Techniques
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.