Tensile Mechanical Properties of Three-Dimensional Type I Collagen Extracellular Matrices With Varied Microstructure
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
The importance and priority of specific micro-structural and mechanical design parameters must be established to effectively engineer scaffolds (biomaterials) that mimic the extracellular matrix (ECM) environment of cells and have clinical applications as tissue substitutes. In this study, three-dimensional (3-D) matrices were prepared from type I collagen, the predominant compositional and structural component of connective tissue ECMs, and structural-mechanical relationships were studied. Polymerization conditions, including collagen concentration (0.3–3 mg/mL) and pH (6–9), were varied to obtain matrices of collagen fibrils with different microstructures. Confocal reflection microscopy was used to assess specific micro-structural features (e.g., diameter and length) and organization of component fibrils in 3-D. Microstructural analyses revealed that changes in collagen concentration affected fibril density while maintaining a relatively constant fibril diameter. On the other hand, both fibril length and diameter were affected by the pH of the polymerization reaction. Mechanically, all matrices exhibited a similar stress-strain curve with identifiable “toe,” “linear,” and “failure” regions. However, the linear modulus and failure stress increased with collagen concentration and were correlated with an increase in fibril density. Additionally, both the linear modulus and failure stress showed an increase with pH, which was related to an increased fibril length and a decreased fibril diameter. The tensile mechanical properties of the collagen matrices also showed strain rate dependence. Such fundamental information regarding the 3-D microstructural-mechanical properties of the ECM and its component molecules are important to our overall understanding of cell-ECM interactions (e.g., mechanotransduction) and the development of novel strategies for tissue repair and replacement.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Biomechanics. Mechanical Properties of Living Tissues
Fung, Y. C., & Skalak, R. (1982) · Journal of Applied Mechanics · doi:10.1115/1.3162171 · Cited by 6,025
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140108 · Cited by 1,044
Design of an artificial skin. I. Basic design principles
Yannas, I. V., & Burke, J. F. (1980) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820140314 · Cited by 889
[2] Preparation and characterization of the different types of collagen
Miller, E. J., & Kent Rhodes, R. (1982) · Methods in Enzymology · doi:10.1016/0076-6879(82)82059-4 · Cited by 752
Collagen; ultrastructure and its relation to mechanical properties as a function of ageing
Diamant, J., Keller, A., Baer, E., Litt, M., & Arridge, R. G. C. (1972) · Proceedings of the Royal Society of London. Series B. Biological Sciences · doi:10.1098/rspb.1972.0019 · Cited by 553
Isometric contraction by fibroblasts and endothelial cells in tissue culture: a quantitative study
Kolodney, M., & Wysolmerski, R. (1992) · The Journal of cell biology · doi:10.1083/jcb.117.1.73 · Cited by 447
Wood, G. C., & Keech, M. K. (1960) · Biochemical Journal · doi:10.1042/bj0750588 · Cited by 443
Regulation of extracellular matrix gene expression by mechanical stress
Chiquet, M. (1999) · Matrix Biology · doi:10.1016/s0945-053x(99)00039-6 · Cited by 427
Pins, G. D., Christiansen, D. L., Patel, R., & Silver, F. H. (1997) · Biophysical Journal · doi:10.1016/s0006-3495(97)78247-x · Cited by 390
Research works printed but not linked: 1
- Bateman, J. F., Lamande, S. R., and Ramshaw, J. A. M., 1996, “Collagen Superfamily,” Extracellular Matrix Vol. 2., Molecular Components and Interaction, ed., W. D. Comper, Harwood Academic Publishers, The Netherlands, pp. 22–67.
Cited by
Items 501–600 of 694
A microfluidic device for 2D to 3D and 3D to 3D cell navigation
Shamloo, A., & Amirifar, L. (2015) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/1/015003 · Cited by 5
Jin, T. (2022) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-022-01557-6 · Cited by 5
“…random walk algorithm, a more realistic three-dimensional fiber network structure can be directly obtained via advanced image processing techniques such as the confocal reflection imaging (Roeder et al. 2002; Arganda-Carreras et al. 2010) and the scanning electron microscopy (D’Amore et al. 2010).”
MethodMizutani, T., Furusawa, K., Haga, H., & Kawabata, K. (2016) · Regenerative Therapy · doi:10.1016/j.reth.2016.02.009 · Cited by 5
“2, depending on the experimental system) and the strain range can be widened with increasing collagen concentration [17,18].”
Background3D In Vitro Models of Early Pregnancy: How to Choose the Right Scaffolding Material?
Muzzio, D. O., Foglia, M. L., Desimone, M. F., & Zygmunt, M. (2017) · Current Pharmaceutical Design · doi:10.2174/1381612823666170509104848 · Cited by 5
Design of a biaxial test device for compliant tissue
Hung, H. Q., Chong, C., Steinhart, A., Trexler, J., & Billiar, K. L. (2005) · IEEE Annual Northeast Bioengineering Conference (NEBEC) · doi:10.1109/nebc.2005.1431991 · Cited by 5
Tough Supersoft Sponge Fibers with Tunable Stiffness from a DNA Self‐Assembly Technique
Lee, C. K., Shin, S. R., Mun, J. Y., Han, S., So, I., Jeon, J., Kang, T. M., Kim, S. I., Whitten, P. G., Wallace, G. G., et al. (2009) · Angewandte Chemie · doi:10.1002/ange.200804788 · Cited by 5
Effect of Collagen Gel Structure on Fibroblast Phenotype
Grace, L. H. Y., & Wah, T. Y. (2012) · Journal of Emerging Investigators · doi:10.59720/12-010 · Cited by 5
Modeling of Bio-inspired Jellyfish Vehicle for Energy Efficient Propulsion
Joshi, K. B. (2013) · VTechWorks (Virginia Tech) · Cited by 5
Collagen microarchitecture from polarized light imaging: a biomechanics perspective
Kunz, M. B., Lee, P.-Y., Latour, G., Yang, B., Schanne‐Klein, M., Kurokawa, K., & Sigal, I. A. (2026) · Journal of Biomedical Optics · doi:10.1117/1.jbo.31.1.010902 · Cited by 4
“42 When the fiber orientation is anisotropic, known as structural anisotropy, the mechanical properties are also anisotropic.”
InfluentialPereira, L. D. C., Echarte, L., Romero, M., Grazioli, G., Cámpos, H. P., Francia, A., Vicentino, W., Mombrú, Á. W., Faccio, R., Álvarez, I., et al. (2021) · Cell and Tissue Banking · doi:10.1007/s10561-021-09960-6 · Cited by 4
“…represents the major structural extracellular matrix protein of vertebrates, among which collagen type I (Col 1) is the most extensively studied (Roeder et al. 2002), acting as a structural component but also mediating biological functions like cell binding, migration, growth, and chemotaxis…”
Nabilla, N., Shofiyah, I., Sugiharto, Alvitasari, D., Sumarsih, S., Khaleyla, F., Wirawati, I., & Winarni, D. (2024) · Aquaculture and Fisheries · doi:10.1016/j.aaf.2024.09.003 · Cited by 4
Yanai, T., Onuma, K., & Nagami, T. (2024) · Medicine & Science in Sports & Exercise · doi:10.1249/mss.0000000000003614 · Cited by 4
A Magnetic Post Approach for Measuring the Viscoelasticity of Biomaterials
Bielawski, K. S., & Sniadecki, N. J. (2015) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2015.2504844 · Cited by 4
“studies on the modulus of collagen gels, including studies on the shear modulus [33], studies modeling gels to find the Young’s modulus [34], [35], and studies on mixtures of gels with cells [36] or gluteraldehyde [37].”
BackgroundKarafi, T., Tahiri, A., Idiri, M., & Boubeker, B. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.11.051 · Cited by 4
Takeishi, N., Shigematsu, T., ENOSAKI, R., Ishida, S., Ii, S., & Wada, S. (2021) · Journal of The Royal Society Interface · doi:10.1098/rsif.2021.0554 · Cited by 4
“3–3mgml, and showed the strain-hardening character of the matrices [50].”
BackgroundResultImaging Tumor Microenvironment with Ultrasound
Sridhar, M., & Insana, M. F. (2005) · Lecture notes in computer science · doi:10.1007/11505730_43 · Cited by 4
Multiscale analysis of mechanical and structural properties of agarose–silk fibroin hydrogels
Plichta, T., Mrázová, K., Richterová, V., Khyrova, M., Lukeš, J., & Šepitka, J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.148133 · Cited by 3
Measuring the mechanical properties of living neonatal mouse skin tissue by atomic force microscopy
Joshi, S., Rianna, C., Mirastschijski, U., & Radmacher, M. (2017) · AIP conference proceedings · doi:10.1063/1.5001607 · Cited by 3
Effects of Matrix Viscoelasticity on HepG2 Cell Metastasis in a Microfluidic Device
Ye, Q.-F., Cai, S., Dai, X., Yan, X., Zou, M., & Xu, Z. (2013) · Journal of Medical and Biological Engineering · Cited by 3
A NOVEL FOAMY COLLAGEN AS A DURAL SUBSTITUTE
Liao, C.-J., Wang, W., Liang, H., Su, Y.-C., Hsu, P., Wang, Y., Tsai, Y., Chen, Y., & Tseng, S. (2014) · Biomedical Engineering Applications Basis and Communications · doi:10.4015/s1016237214500665 · Cited by 3
Telopeptide-dependent xenogeneic collagen co-assembly
Wei, B., Wang, L., Zhong, H., Zhang, J., Xu, C., Xu, Y., He, L., Li, S., & Wang, H. (2019) · New Journal of Chemistry · doi:10.1039/c9nj01169b · Cited by 3
Mechanical Characterization of Porcine Skin Starting Material
Zhang, B., Chester, S. A., Nadimpalli, S. P. V., Suriano, J. T., Theis, D. P., & Lieber, S. C. (2021) · Journal of Engineering and Science in Medical Diagnostics and Therapy · doi:10.1115/1.4051563 · Cited by 3
Hypoxia and Matrix Manipulation for Vascular Engineering
Blatchley, M. R., Abaci, H. E., Hanjaya‐Putra, D., & Gerecht, S. (2018) · Biological and medical physics, biomedical engineering · doi:10.1007/978-3-319-99319-5_4 · Cited by 3
Anohova, V., Asyakina, L. K., Babich, O., Dikaya, O., Goikhman, A., Maksimova, K., Владимировна, Г. М., Korobenkov, M. V., Burkova, D., Barannikov, A. A., et al. (2023) · Polymers · doi:10.3390/polym15051220 · Cited by 3
“The mechanical properties of the collagen scaffolds were estimated according to [33].”
MethodRetractedSeifer, B. J., & Wagner, C. T. (2016) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2016.1200563 · Cited by 3
“TE 3D scaffolds are commonly prepared as crosslinked hydrogels with significantly different mechanical attributes than target native tissues and, therefore, require significant ECM production in culture to support in vivo mechanical function (Roeder et al. 2002; Huang et al. 2012).”
BackgroundFunctional Bone Tissue Engineering using Human Mesenchymal Stem Cells and Polymeric Scaffolds
Sumanasinghe, R. D. (2007) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 3
Current and Potential Uses of Marine Collagen for Regenerative Medicines
Kirti, K., & Khora, S. S. (2020) · Springer eBooks · doi:10.1007/978-981-15-5017-1_24 · Cited by 3
Designer Collagen-Fibril Biograft Materials for Tunable Molecular Delivery
Joshi, R. V. (2016) · Purdue e-Pubs (Purdue University System) · Cited by 3
Dual-matrix 3D culture system as a biomimetic model of epithelial tissuesPreprint
Bogorodskaya, D., McLane, J. S., & Ligon, L. A. (2019) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/594549 · Cited by 3
“…structural or mechanical characteristics, such as pore size, fibril size, alignment, stiffness (Chenite et al., 2001; Munoz-316 Pinto et al., 2012; Roeder et al., 2002; Wang et al., 2010; Deng et al., 2010; McKay et al., 2014; Wang and Stegemann, 2011; Liang et al., 2011), or to modulate ligand…”
BackgroundTan, E. Y. S. (2019) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/105573 · Cited by 3
Sanz‐Herrera, J. A., Apolinar–Fernández, A., Jimenez-Aires, A., Perez-Alcantara, P., Domínguez, J., & Reina-Romo, E. (2024) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2024.01.09.574800 · Cited by 3
“Reproducing structures with similar properties to the ECM allows in vitro studies to resemble in vivo material behavior [4, 5] that serves to organize and regulate cells and that may be relevant in developing new therapies for pathologies [6].”
BackgroundMethodInfluentialVyumvuhore, R. (2013) · theses.fr (ABES) · doi:10.70675/4f14236bz6a31z4ad4zbdf1z24e96afe6e5d · Cited by 3
“Un certain nombre d auteurs a montré qu avec l augmentation de la vitesse de déformation, le module d élasticité ainsi que la contrainte à la rupture augmentent alors que la déformation à la rupture diminue [96, 97].”
Astruc, L. (2019) · theses.fr (ABES) · doi:10.70675/73a55ce9z4208z46b7z8735zd576ffc844e5 · Cited by 3
Baylot, V., Aliès, B., Rocchi, P., & Barthélémy, P. (2025) · Materials Advances · doi:10.1039/d5ma00579e · Cited by 2
Caveolin-1-dependent regulation of cell-matrix interphase in 3D collagen gels
Mazumdar, D., Kataria, S., Panda, G. P., Kulkarni, A., Patil, S., Dash, M., & Balasubramanian, N. (2025) · Biophysical Journal · doi:10.1016/j.bpj.2025.11.015 · Cited by 2
Bioinspired Fiber Networks With Tunable Mechanical Properties by Additive Manufacturing
Sarkar, M., & Notbohm, J. (2023) · Journal of Applied Mechanics · doi:10.1115/1.4062451 · Cited by 2
Joseph, A. (2020) · Saint Mary's University Institutional Repository (Saint Mary's University) · Cited by 2
Collagen Biomaterials for Nerve Tissue Engineering
Eleftheriadou, D., & Phillips, J. B. (2022) · Reference series in biomedical engineering · doi:10.1007/978-3-030-21052-6_20 · Cited by 2
Zhang, Y., Quindoza, G. M., Mizuno, H. L., Nakagawa, Y., Tanaka, T., Anraku, Y., & Ikoma, T. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01617 · Cited by 2
Geometry-Driven Mechanical Memory in a Random Fibrous Matrix
Sarkar, M., Laukaitis, C. M., & Johnson, A. J. W. (2025) · Journal of Applied Mechanics · doi:10.1115/1.4067854 · Cited by 2
Liu, T., & Liang, F. (2025) · Mechanics of Materials · doi:10.1016/j.mechmat.2025.105273 · Cited by 2
Detecting the collagen-based hydrogels degradation by multiphoton microscopy (MPM)
Lang, X., Spousta, M. J., & Lyubovitsky, J. G. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2080559 · Cited by 2
Li, F., Wang, Q., & Wang, J. (2006) · Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS) · doi:10.1109/freq.2006.275443 · Cited by 2
“For the tensile modulus of collagen matrix from the literature, the value is 2-33KPa varying with PH values and collagen concentrations, which is in the same range with our results [ 13 ].”
ResultBellomo, F. J., Oller, S., & Nallim, L. G. (2011) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2011.585976 · Cited by 2
“Roeder et al. (2002) studied the structural–mechanical relationship of threedimensional type I collagen matrices prepared in vitro.”
BackgroundA Novel Composite Material-based Computational Model for Left Ventricle Biomechanics Simulation
Haddad, S. M. H. (2016) · Scholarship@Western (Western University) · Cited by 2
Biophysics of Blood Platelet Contraction
Henriques, S. S. G. (2013) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-3853 · Cited by 2
Szulczewski, J. M., Inman, D. R., Proestaki, M., Notbohm, J., Burkel, B. M., & Ponik, S. M. (2020) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2020.08.12.248179 · Cited by 2
Dinca, S. C., Greiner, D., Weidenfeld, K., Bond, L., Barkan, D., & Jorcyk, C. L. (2020) · Research Square · doi:10.21203/rs.3.rs-57684/v1 · Cited by 2
Multiscale and Multiphysics of Blood Flow and Arterial Mechanics Growth and Remodeling
Schmidt Bazzi, M. (2024) · University of Minnesota Digital Conservancy (University of Minnesota) · Cited by 2
Unicellular Parasite Motility: A Quantitative Perspective
Uppaluri, S. (2011) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-2913 · Cited by 2
A Composite Material-based Computational Model for Diaphragm Muscle Biomechanical Simulation
Coelho, B. A. Z. (2018) · Scholarship@Western (Western University) · Cited by 1
Bohyn, A., Schoen, E. D., Ng, C. P., Bishard, K., Haarmans, M., Trietsch, S. J., & Goos, P. (2023) · Journal of Agricultural Biological and Environmental Statistics · doi:10.1007/s13253-023-00570-1 · Cited by 1
“However, the physical properties of collagen are strongly influenced by its polymerization conditions, such as pH and temperature (Roeder et al., 2002).”
Instability of vascular bilayer reveals the protective role of connective tissue
Wu, D., Guo, B., Yin, Y., Zuo, S., Lei, H., Zhao, Z., & Fang, D. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106466 · Cited by 1
Visonà, A., Morel, R., Joisten, H., Diény, B., & Nicolas, A. (2026) · Nanoscale Advances · doi:10.1039/d5na00854a · Cited by 1
“For example Matrigel exhibits a pore size between 100-200 nm [37] while the pore size in gels made of collagen 1 varies between 1 to 10 micrometre, values that are thus comparable to the dimensions of the particles used in this study [38].”
Fractal cracking: An emergent failure mode of nacreous materials with microstructural randomness
Yan, Y., Ji, H., Zhao, Z.-Z., Wang, M., Deng, Z., Feng, X.-Q., & Yao, H. (2026) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2026.106552 · Cited by 1
Collagen films with controlled surface topology improve corneal cell migration
Nashchekina, Y. A., Sirotkina, M., Inozemtceva, A., Kriger, D., Temnikov, O., Prasolov, N. D., Nashchekin, A. V., & Mikhailova, N. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115756 · Cited by 1
Camman, M., Nieswic, N., Mauviel, M., Joanne, P., Brun, J., Villerabel, L., Marcellan, A., Agbulut, O., & Hélary, C. (2026) · Biomaterials Science · doi:10.1039/d6bm00046k · Cited by 1
Bai, X., Xue, Y., Li, J. B., Liu, Y., Ye, Z., Yan, H. J., & Zhou, Y. (2026) · BMC Oral Health · doi:10.1186/s12903-026-08709-5 · Cited by 1
“Consistent with the intrinsic properties of porcine dermal collagen fibers, PD therefore exhibits lower tensile strength and tear resistance [34].”
Fontana, G., Innamorati, G., & Giacomello, L. (2026) · International Journal of Molecular Sciences · doi:10.3390/ijms27167259 · Cited by 1
Engineering Tissue‐Relevant Collagen Bundle Architectures via Macromolecular Crowding
Gong, X., Liang, Z., Huang, Y., Liu, R., Zhou, Z., Saucedo, Y., Wen, Z., Rossello‐Martinez, A., Karimi, M., Pan, L., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71566 · Cited by 1
Towards understanding the role of cellular force in cancer progression
Emon, B. (2023) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 1
Cell Matrix Adhesion in Three Dimensions
Keely, P. J. (2008) · Wiley eBooks · doi:10.1002/9783527622092.ch7 · Cited by 1
Hypoxia and Matrix Manipulation for Vascular Engineering
Abaci, H. E., Hanjaya‐Putra, D., & Gerecht, S. (2010) · Biological and medical physics series · doi:10.1007/978-1-4419-7835-6_7 · Cited by 1
“The stiffness of ECM-based gels can be increased either by increasing their concentration, which also alters their ligand and fibril density [155], or by altering the cross-linking of ECM proteins in a narrow range using a microbial transglutaminase [201].”
BackgroundContribution of Fiber Undulation to Mechanics of Three‐Dimensional Collagen‐I Gel
Lin, S., & Gu, L. (2016) · Macromolecular Symposia · doi:10.1002/masy.201650020 · Cited by 1
A FSI-based structural approach for micromechanical characterization of adipose tissue
Seyfi, B., Sabzalinejad, M., Haddad, S. M. H., Fatouraee, N., & Samani, A. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2254652 · Cited by 1
“In order to obtain hyperelastic parameters of ECM, we employed an inverse problem technique which uses the developed FSI model as a forward model to determine the elasticity parameters of adipose tissue samples with stress-strain data available in the literature [12].”
MethodRole of Magnesium on Mineralization and Periosteal Differentiation
Hong, D. (2019) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 1
Stem Cell Therapy in Wound Care
Aljghami, M. E., & Amini‐Nik, S. (2020) · Updates in clinical dermatology · doi:10.1007/978-3-030-28872-3_14 · Cited by 1
Evaluation of Cell’s Passability in the ECM Network
Zhang, Y., Huang, Z., Dong, S., Liu, Z., Liu, Y., Tang, L., Cheng, T., & Zhou, X. (2020) · Biophysical Journal · doi:10.1016/j.bpj.2020.07.032 · Cited by 1
“of type I collagen and observed the nonlinearityof the collagen matrix (22).”
BackgroundMethodResultInfluentialMechanical characterization of animal derived starting materials for tissue engineering
Zhang, B. (2020) · Cited by 1
Neubert, N. R., Evans, E. J., & Dallon, J. C. (2021) · Journal of Biomechanical Engineering · doi:10.1115/1.4052113 · Cited by 1
The Concept of a Rupture Risk Envelope for the Cochleo-Saccular Membranes
Pender, D. J. (2022) · International Archives of Otorhinolaryngology · doi:10.1055/s-0042-1742331 · Cited by 1
“3 and used with permission, 7 the strain rate can be controlled with precision.”
BackgroundThe Distensibility of Reissner’s Membrane: A Comparative Analysis
Pender, D. J. (2022) · Annals of Otology and Neurotology · doi:10.1055/s-0043-1761406 · Cited by 1
Sousa, L. L. D. L. (2023) · Journal of Dentistry and Oral Sciences · doi:10.37191/mapsci-2582-3736-5(3)-154 · Cited by 1
Riesterer, J., Warchock, A., Krawczyk, E., Ni, L., Kim, W., Moroi, S. E., Xu, G., & Argento, A. (2024) · Bioengineering · doi:10.3390/bioengineering11100996 · Cited by 1
Stiffening of a fibrous matrix after recovery of contracted inclusions
Sarkar, M., Hossain, M. T., Ewoldt, R. H., Laukaitis, C. M., & Johnson, A. J. W. (2025) · Soft Matter · doi:10.1039/d5sm00087d · Cited by 1
Mineralization of nanomaterials for bone tissue engineering
Marelli, B., Ghezzi, C. E., & Nazhat, S. N. (2013) · Elsevier eBooks · doi:10.1533/9780857097231.3.387 · Cited by 1
A microfluidic platform for three-dimensional neuron culture
Varner, J. (2007) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 1
Cell 3D: Kunststoffschäume für dreidimensionale Zellkultivierung
Walter, A., Leicher, S., & Wintermantel, E. (2009) · Springer eBooks · doi:10.1007/978-3-540-93936-8_33 · Cited by 1
Mandetta, C. D. M. R. (2012) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.58.2012.tde-12072012-110036 · Cited by 1
PROCESS OPTIMIZATION AND VALIDATION OF AN ASSAY FOR HIGH- THROUGHPUT SCREENING
Ravindranath, P. P. (2006) · UKnowledge (University of Kentucky) · Cited by 1
Functional tissue engineering : age-related changes and cell-based repair of the patellar tendon.
Dressler, M. R. (2004) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 1
Ureidopyrimidinone-based supramolecular networks for biomedical applications
Pape, A. B. (2015) · TU/e Research Portal · Cited by 1
Nanomechanical Analysis of Extracellular Matrix and Cells in Multicellular SpheroidsPreprint
Vyas, V., Solomon, M., D’Souza, G. G. M., & Huey, B. D. (2017) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/193516 · Cited by 1
“modulus of collagen fibers in 3D cell cultures[43].”
BackgroundStrain stabilizes reconstituted collagen fibrillar network against enzymatic cleavage by collagenase
Bhole, A. P. (2008) · Digital Repository Service (Northeastern University) · doi:10.17760/d10018530 · Cited by 1
Liverani, C. (2018) · AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna) · doi:10.6092/unibo/amsdottorato/8308 · Cited by 1
Development of a 3D culture system to study the skeletal metastasis of prostate cancer
Sieh, S. (2011) · Faculty of Built Environment and Engineering; Institute of Health and Biomedical Innovation · Cited by 1
Cell 3D: Kunststoffschäume für dreidimensionale Zellkultivierung
Walter, A., Leicher, S., & Wintermantel, E. (2008) · Springer eBooks · doi:10.1007/978-3-540-74925-7_29 · Cited by 1
Paradiso, F. (2022) · Cronfa (Swansea University) · doi:10.23889/suthesis.60122 · Cited by 1
Modeling of Cell Transfer and Process-Induced Cell Damage in Laser-Assisted Cell Direct Writing
Wang, W. (2010) · TigerPrints (Clemson University) · Cited by 1
Shedding Light on the Nonlinear Stiffening Effect of Sheared Type-I Collagen Networks
Arevalo, R. C. (2013) · DigitalGeorgetown (Georgetown University Library) · Cited by 1
3D printed magnetic scaffolds for bone cancer theranostics and regeneration
Tavares, F. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 1
Development of Biofabrication Techniques to Engineer 3D in vitro Models of Tissue Barriers
Jalali, S. (2024) · MacSphere (McMaster University) · doi:10.71548/13482 · Cited by 1
Developing disease-state liver models to determine the effects on brain function in vitro
Sullivan, K. M. (2021) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 1
Douillet, C. (2021) · theses.fr (ABES) · doi:10.70675/086bc023z3a06z46dezb956ze4ca1e0db85e · Cited by 1
Molecularly designed self-assembling matrices for applications in regenerative medicine
Ferreira, D. S. D. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Olson, A. C. K. (2014) · eScholarship (California Digital Library)
Design and development of multilayer vascular graft
Madhavan, K. P. C. (2011) · CU Scholar (University of Colorado Boulder)
Mechanical behavior and microstructure of self-assembling oligopeptide gels
Hammond, N. A. (2010) · DSpace@MIT (Massachusetts Institute of Technology)
Tissue and Organ Bioengineering
Grikscheit, T. C., & Barthel, E. R. (2014) · Wiley eBooks · doi:10.1002/9781118873434.ch52
Metadata
- Authors
- Roeder, B. A., Kokini, K., Sturgis, J. E., Robinson, J. P., & Voytik-Harbin, S. L.
- Affiliations
- Purdue University West Lafayette (US)
- Department of Basic Medical Sciences/Department of Biomedical Engineering, Purdue University, West Lafayette, IN 47907-1515
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 2002-03-29
- Volume
- 124
- Issue
- 2
- Pages
- 214-222
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2133809313
- Semantic Scholar
- 6d026775d9662abbe0965c21925caeb1f0a96e7c
- Cited by
- 620
- References
- 41
- Citations by year
- 2026: 13 · 2025: 21 · 2024: 16 · 2023: 23 · 2022: 24 · 2021: 29 · 2020: 34 · 2019: 40 · 2018: 24 · 2017: 32 · 2016: 33 · 2015: 42 · 2014: 37 · 2013: 40 · 2012: 33
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Science Foundation
- Division of Graduate Education
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- type I collagen, extracellular matrix, collagen fibrils, tensile properties, collagen content, fibril diameter, fibril length, strain rate sensitivity, stress-strain behavior, tissue engineering scaffolds, cell-matrix interactions, mechanotransduction
- MeSH terms
- Animals, Cattle, Elasticity, Extracellular Matrix, Hydrogen-Ion Concentration, Microscopy, Interference, Models, Biological, Polymers, Sensitivity and Specificity, Stress, Mechanical, Tensile Strength, Reproducibility of Results, Microscopy, Confocal, Collagen Type I, In Vitro Techniques
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.