The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture
Abstract
Manufacturing processes that can create extremely small machines have been developed in recent years. Microelectromechanical systems (MEMS) refer to devices that have characteristic length of less than 1 mm but more than 1 micron, that combine electrical and mechanical components and that are fabricated using integrated circuit batch-processing techniques. Electrostatic, magnetic, pneumatic and thermal actuators, motors, valves, gears, and tweezers of less than 100-μm size have been fabricated. These have been used as sensors for pressure, temperature, mass flow, velocity and sound, as actuators for linear and angular motions, and as simple components for complex systems such as micro-heat-engines and micro-heat-pumps. The technology is progressing at a rate that far exceeds that of our understanding of the unconventional physics involved in the operation as well as the manufacturing of those minute devices. The primary objective of this article is to critically review the status of our understanding of fluid flow phenomena particular to microdevices. In terms of applications, the paper emphasizes the use of MEMS as sensors and actuators for flow diagnosis and control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computer Simulation of Liquids
Allen, M. P., & Tildesley, D. J. (2017) · doi:10.1093/oso/9780198803195.001.0001 · Cited by 20,945
Intermolecular and Surface Forces
(2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10024-6 · Cited by 16,923
An Introduction to Fluid Dynamics
Batchelor, G. K. (2000) · doi:10.1017/cbo9780511800955 · Cited by 12,360
Bhatnagar, P. L., Gross, E. P., & Krook, M. (1954) · Physical Review · doi:10.1103/physrev.94.511 · Cited by 8,543
Tennekes, H., & Lumley, J. L. (1972) · The MIT Press eBooks · doi:10.7551/mitpress/3014.001.0001 · Cited by 8,340
The mathematical theory of non-uniform gases
(1953) · Journal of the Franklin Institute · doi:10.1016/0016-0032(53)90422-0 · Cited by 7,601
Molecular Gas Dynamics And The Direct Simulation Of Gas Flows
Bird, G. A. (1994) · doi:10.1093/oso/9780198561958.001.0001 · Cited by 7,269
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Turbulent Transport of Momentum and Heat
Tennekes, H., & Lumley, J. L. (1972) · Cited by 3,166
The Statistical Description of Turbulence
Tennekes, H., & Lumley, J. L. (1972) · Cited by 3,166
Cited by
Microfluidics: Fluid physics at the nanoliter scale
Squires, T. M., & Quake, S. R. (2005) · Reviews of Modern Physics · doi:10.1103/revmodphys.77.977 · Cited by 4,379
Boundary slip in Newtonian liquids: a review of experimental studies
Neto, C., Evans, D. R., Bonaccurso, E., Butt, H.-J., & Craig, V. S. J. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/12/r05 · Cited by 1,154
Kinetic theory representation of hydrodynamics: a way beyond the Navier–Stokes equation
SHAN, X., YUAN, X.-F., & CHEN, H. (2006) · Journal of Fluid Mechanics · doi:10.1017/s0022112005008153 · Cited by 1,071
Principles and applications of nanofluidic transport
Sparreboom, W., van den Berg, A., & Eijkel, J. C. T. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.332 · Cited by 900
Convective Heat and Mass Transfer
Ghiaasiaan, S. M. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511800603 · Cited by 788
Microfluidics: The No-Slip Boundary Condition
Lauga, E., Brenner, M., & Stone, H. (2007) · Springer Handbook of Experimental Fluid Mechanics · doi:10.1007/978-3-540-30299-5_19 · Cited by 671
Modeling gas flow through microchannels and nanopores
Roy, S., Raju, R., Chuang, H. F., Cruden, B. A., & Meyyappan, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1559936 · Cited by 620
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Gas flow in ultra-tight shale strata
Darabi, H., Ettehad, A., Javadpour, F., & Sepehrnoori, K. (2012) · Journal of Fluid Mechanics · doi:10.1017/jfm.2012.424 · Cited by 556
Microfluidics: Basic issues, applications, and challenges
Stone, H. A., & Kim, S. (2001) · AIChE Journal · doi:10.1002/aic.690470602 · Cited by 552
Wörner, M. (2012) · Microfluidics and Nanofluidics · doi:10.1007/s10404-012-0940-8 · Cited by 438
Recent Advances in Micro-Particle Image Velocimetry
Wereley, S. T., & Meinhart, C. D. (2010) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-121108-145427 · Cited by 356
Effects of interface wettability on microscale flow by molecular dynamics simulation
Nagayama, G., & Cheng, P. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.07.013 · Cited by 331
Fluid mixing in a T-shaped micro-mixer
Bothe, D., Stemich, C., & Warnecke, H.-J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2005.10.060 · Cited by 325
A review on slip models for gas microflows
Zhang, W.-M., Meng, G., & Wei, X. (2012) · Microfluidics and Nanofluidics · doi:10.1007/s10404-012-1012-9 · Cited by 322
Transition from laminar to turbulent flow in liquid filled microtubes
Sharp, K. V., & Adrian, R. J. (2004) · Experiments in Fluids · doi:10.1007/s00348-003-0753-3 · Cited by 311
Hetsroni, G., Mosyak, A., Pogrebnyak, E., & Yarin, L. P. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.12.019 · Cited by 308
Molecular Momentum Transport at Fluid-Solid Interfaces in MEMS/NEMS: A Review
Cao, B.-Y., Sun, J., Chen, M., & Guo, Z.-Y. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10114638 · Cited by 304
Single-phase heat transfer in microchannels: The importance of scaling effects
Rosa, P., Karayiannis, T. G., & Collins, M. W. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.05.015 · Cited by 292
Size effect on microscale single-phase flow and heat transfer
Guo, Z.-Y., & Li, Z.-X. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00209-0 · Cited by 286
Effect of axial conduction on the heat transfer in micro-channels
Tiselj, I., Hetsroni, G., Mavko, B., Mosyak, A., Pogrebnyak, E., & Segal, Z. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.01.008 · Cited by 266
Li, H., Ding, X., Meng, F., Jing, D., & Xiong, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118638 · Cited by 256
Beyond Navier–Stokes: Burnett equations for flows in the continuum–transition regime
Agarwal, R. K., Yun, K.-Y., & Balakrishnan, R. (2001) · Physics of Fluids · doi:10.1063/1.1397256 · Cited by 253
Metadata
- Authors
- Gad-el-Hak, M.
- Venue
- Journal of Fluids Engineering
- Publisher
- ASME International
- Published
- 1999-03-01
- Volume
- 121
- Issue
- 1
- Pages
- 5-33
- ISSN
- 0098-2202 (ISSN-L)
- 1528-901X
- OpenAlex
- W2078298270
- Cited by
- 1,318
- References
- 55
- FWCI
- 23.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.