The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Thermal Properties of Metal-Coated Vertically Aligned Single-Wall Nanotube Arrays
Abstract
Owing to their high thermal conductivities, carbon nanotubes (CNTs) are promising for use in advanced thermal interface materials. While there has been much previous research on the properties of isolated CNTs, there are few thermal data for aligned films of single wall nanotubes. Furthermore, such data for nanotube films do not separate volume from interface thermal resistances. This paper uses a thermoreflectance technique to measure the volumetric heat capacity and thermal interface resistance and to place a lower bound on the internal volume resistance of a vertically aligned single wall CNT array capped with an aluminum film and palladium adhesion layer. The total thermal resistance of the structure, including volume and interface contributions, is 12m2KMW−1. The data show that the top and bottom interfaces of the CNT array strongly reduce its effective vertical thermal conductivity. A low measured value for the effective volumetric heat capacity of the CNT array shows that only a small volume fraction of the CNTs participate in thermal transport by bridging the two interfaces. A thermal model of transport in the array exploits the volumetric heat capacity to extract an individual CNT-metal contact resistance of 10m2K1GW−1 (based on the annular area Aa=πdb), which is equivalent to the volume resistance of 14nm of thermal SiO2. This work strongly indicates that increasing the fraction of CNT-metal contacts can reduce the total thermal resistance below 1m2KMW−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K
Stoner, R. J., & Maris, H. J. (1993) · Physical Review B · doi:10.1103/physrevb.48.16373 · Cited by 646
Cited by
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Rao, R., Pint, C. L., Islam, A. E., Weatherup, R. S., Hofmann, S., Meshot, E. R., Wu, F., Zhou, C., Dee, N., Amama, P. B., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b06511 · Cited by 588
Thermal conductivity of carbon nanotube networks: a review
Kumanek, B., & Janas, D. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03368-0 · Cited by 486
Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
Self-citationThermal conduction phenomena in carbon nanotubes and related nanostructured materials
Marconnet, A. M., Panzer, M. A., & Goodson, K. E. (2013) · Reviews of Modern Physics · doi:10.1103/revmodphys.85.1295 · Cited by 454
Self-citation
Metadata
- Authors
- Panzer, M. A., Zhang, G., Mann, D., Hu, X., Pop, E., Dai, H., & Goodson, K. E.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 2008-04-08
- Volume
- 130
- Issue
- 5
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2081374055
- Cited by
- 199
- References
- 2
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Properties of Metal-Coated Vertically Aligned Single-Wall Nanotube Arrays. https://app.cochat.ai/papers/10.1115/1.2885159
- The paper
- Panzer, M. A., Zhang, G., Mann, D., Hu, X., Pop, E., Dai, H., & Goodson, K. E. (2008). Thermal Properties of Metal-Coated Vertically Aligned Single-Wall Nanotube Arrays. Journal of Heat Transfer. https://doi.org/10.1115/1.2885159
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.