Melting and Solidification of a Pure Metal on a Vertical Wall
The DOI matches its Crossref record.
Abstract
This paper reports on the role of natural convection on solid–liquid interface motion and heat transfer during melting and solidification of a pure metal (gallium) on a vertical wall. The measurements of the position of the phase-change boundary as well as of temperature distributions and temperature fluctuations were used as a qualitative indication of the natural convection flow regimes and structure in the melt during phase transformation taking place in a rectangular test cell heated or cooled from one of the vertical walls. For melting, the measured melt volume and heat transfer coefficients are correlated in terms of relevant dimensionless parameters. For solidification, the measured volume of metal solidified on the wall is compared with predictions based on a one-dimensional model.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Firstly, the melting/solidification model is validated against experimental data of melting pure Gallium in a rectangular cavity51.”
From A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications (2023) · cites this paper as [51]
Citations
Cites
Still being checked.
Cited by
Items 201–300 of 692
Numerical modelling of liquid/solid phase transitions
Cerimele, M. M., Mansutti, D., & Pistella, F. (2002) · Computers & Fluids · doi:10.1016/s0045-7930(01)00062-7 · Cited by 35
COMPUTATION OF SOLIDIFICATION AND MELTING USING THE PISO ALGORITHM
Kang, K., & Ryou, H. S. (2004) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407790490438563 · Cited by 35
Saraswat, A., Bhattacharjee, R., Verma, A., Das, M. K., & Khandekar, S. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.178 · Cited by 35
The Effect of a Magnetic Field on the Melting of Gallium in a Rectangular Cavity
Farsani, R. Y., Raisi, A., Nadooshan, A. A., & Vanapalli, S. (2017) · Heat Transfer Engineering · doi:10.1080/01457632.2017.1404821 · Cited by 35
Marri, G. K., & Balaji, C. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.107176 · Cited by 35
Martinez, D., Bate, C., & Manogharan, G. P. (2020) · JOM · doi:10.1007/s11837-019-03975-x · Cited by 34
Said, M. A., Hosseinzadeh, K., Kaplan, S., Rahbari, A., Tiji, M. E., Mahdi, J. M., Cairns, A., & Talebizadehsardari, P. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110286 · Cited by 34
Yu, G., Yu, B., Liang, Y., Wang, M., Joshi, Y. K., & Sun, D. (2017) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2016.1277934 · Cited by 33
Amirsom, N. A., Uddin, M. J., Basir, M. F. M., Kadir, A., Bég, O. A., & Ismail, A. I. M. (2019) · Applied Sciences · doi:10.3390/app9122493 · Cited by 33
Parsazadeh, M., & Duan, X. (2020) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4046537 · Cited by 33
Hu, N., Fan, L., & Zhu, Z.-Q. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120751 · Cited by 33
Ghalambaz, M., Mehryan, S. A. M., Tahmasebi, A., & Hajjar, A. (2020) · Applied Mathematical Modelling · doi:10.1016/j.apm.2020.03.046 · Cited by 33
McDaniel, D. J., & Zabaras, N. J. (1994) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620371605 · Cited by 33
Heat transfer—a review of 1986 literature
Eckert, E. R. G., Goldstein, R. J., Pfender, E., Ibele, W. E., Patankar, S. V., Ramsey, J. W., Simon, T. W., Decker, N. A., Kuehn, T. H., Lee, H. O., et al. (1987) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(87)90132-3 · Cited by 33
Martínez-Figueira, N., Sánchez, P., Porter, J., & Ezquerro, J. M. (2021) · Physics of Fluids · doi:10.1063/5.0058869 · Cited by 32
Numerical simulation of a phase change material in a spherical capsule with a hollow fin
Meghari, Z., Bouhal, T., Benghoulam, M., Rhafiki, T. E., Khattabi, E. M. E., Doghmi, H., & Mohammed, O. J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103024 · Cited by 32
Zhou, W., Li, S., Feng, Y., & Lin, L. (2023) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2023.108214 · Cited by 32
Schroeder, P. W., & Lube, G. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.01.055 · Cited by 32
Sârbu, I., & Sebarchievici, C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811662-3.00004-9 · Cited by 32
Binet, B., & Lacroix, M. (1998) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407789808913935 · Cited by 32
A finite volume–based thermo-fluid-mechanical model of the LPBF process
Yang, X., Li, B., Li, Y., Yang, B., & Zhou, K. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109759 · Cited by 31
A Cartesian grid solver for simulation of a phase-change material (PCM) solar thermal storage device
Augspurger, M., & Udaykumar, H. S. (2016) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407790.2015.1097106 · Cited by 31
Yang, X., & Liu, J. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.117 · Cited by 31
Review on numerical simulations for nano-enhanced phase change material (NEPCM) phase change process
Irwan, M. A. M., Sidik, N. A. C., Asako, Y., & Ghaderian, J. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-09038-2 · Cited by 31
Amidu, M. A., Addad, Y., Lee, J. I., Kam, D. H., & Jeong, Y. H. (2021) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2021.111107 · Cited by 31
Taghilou, M., & Talati, F. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.07.002 · Cited by 31
Importance of natural convection on numerical modelling of the building integrated PVP/PCM systems
Ezan, M. A., Yüksel, C., Alptekin, E., & Yılancı, A. (2017) · Solar Energy · doi:10.1016/j.solener.2017.11.022 · Cited by 31
Parsazadeh, M., Malik, M., Duan, X., & McDonald, A. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121103 · Cited by 31
Natural convection melting in a cubic cavity with internal fins: A lattice Boltzmann study
Li, D., & Yu, Z. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100919 · Cited by 31
Marušić, A., & Lončar, D. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114520 · Cited by 30
Dadzis, K., Lukin, G., Meier, D., Bönisch, P., Sylla, L., & Pätzold, O. (2016) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2016.03.037 · Cited by 30
Dadvand, A., Boukani, N. H., & Dawoodian, M. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.06.013 · Cited by 30
Visualization study of melting and solidification in convecting hypoeutectic Ga-In alloy
Derebail, R., & Koster, J. N. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00145-2 · Cited by 30
Ali, M. I. H., Alkaabi, A. K., & Addad, Y. (2021) · International Journal of Energy Research · doi:10.1002/er.7357 · Cited by 29
Alshuraiaan, B., Izadi, M., & Sheremet, M. А. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.101954 · Cited by 29
An improved latent heat thermal energy storage using two layers of metal foams
Ghalambaz, M., Fteiti, M. A., Younis, O., Sheremet, M. А., & Hasan, H. A. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121319 · Cited by 29
Numerical investigation of melting of waxy crude oil in an oil tank
Wang, M., Yu, G., Zhang, X., Zhang, T., Yu, B., & Sun, D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.085 · Cited by 29
Effects of different parameters on the discharging of double-layer PCM through the porous channel
Sefidan, A. M., Taghilou, M., Mohammadpour, M., & Sojoudi, A. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.131 · Cited by 29
Hamad, F. A. W., Egelle, E., Cummings, K., & Russell, P. A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.014 · Cited by 29
Vogel, J., & Bauer, D. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.084 · Cited by 29
Fixed-Grid Modeling of Solid-Liquid Phase Change in Unstructured Meshes Using Explicit Time Schemes
Galione, P., Lehmkuhl, O., Rigola, J., & Oliva, A. (2013) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407790.2013.836399 · Cited by 29
Melting heat transfer inside ducts and over external bodies
FUKUSAKO, S., & Yamada, M. G. (1999) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(99)00011-4 · Cited by 29
Numerical Thermal Model of Resistance Spot Welding in Aluminum
Khan, J. A., Broach, K., & Kabir, A. A. S. A. (2000) · Journal of Thermophysics and Heat Transfer · doi:10.2514/2.6493 · Cited by 29
The finite element model of non-isothermal semi-solid fluid flow
Petera, J., & Kotynia, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.09.019 · Cited by 28
Avnaim, M. H., Mikhailovich, B., Azulay, A., & Levy, A. (2017) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2017.11.004 · Cited by 27
Harish, R., Nimmagadda, R., & Reddy, S. R. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105328 · Cited by 27
Numerical study of melting in an annulur enclosure filled with nano-enhanced phase change material
Sebti, S., Mastiani, M., Kashani, S., Mirzaei, H., & Sohrabi, A. (2013) · Thermal Science · doi:10.2298/tsci120720022s · Cited by 27
Effect of convection heat transfer on thermal energy storage unit
Al-Jethelah, M. S. M., Al-Sammarraie, A. T., Tasnim, S. H., Mahmud, S., & Dutta, A. (2018) · Open Physics · doi:10.1515/phys-2018-0108 · Cited by 27
Development of a 2-D algorithm to simulate convection and phase transition efficiently
Evans, K. J., Knoll, D. A., & Pernice, M. (2006) · Journal of Computational Physics · doi:10.1016/j.jcp.2006.03.025 · Cited by 27
Huo, Y., Yin, M., & Rao, Z. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.107363 · Cited by 26
Feng, G., Feng, Y., Qiu, L., & Zhang, X. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118624 · Cited by 26
Varas, R., Martínez, Ú., Olfe, K. S., Sánchez, P. S., Porter, J., & Ezquerro, J. M. (2023) · Microgravity Science and Technology · doi:10.1007/s12217-023-10040-5 · Cited by 26
Magnetic field effects on melting and solidification of PCMs in an isosceles triangular cavity
Haddad, Z., Iachachene, F., Zidouni, F., & Oztop, H. F. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-10857-5 · Cited by 26
Sen, S., Mahdi, J. M., Talebizadehsardari, P., Rocca, A. L., & Cairns, A. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108997 · Cited by 25
Effect of Marangoni induced instabilities on a melting bridge under microgravity conditions
Šeta, B., Dubert, D. C., Massons, J., Gavaldà, J., Bou‐Ali, M. M., & Ruíz, X. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121665 · Cited by 25
Feng, G., Feng, Y., Qiu, L., & Zhang, X. (2022) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2022.107621 · Cited by 25
Shafi, J., Sheremet, M. А., Fteiti, M. A., Saeed, A. M., & Ghalambaz, M. (2023) · Mathematics · doi:10.3390/math11020356 · Cited by 25
Rokhforouz, M., & Sheikholeslami, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.140269 · Cited by 25
The effect of aspect ratio on PCM melting behaviour in rectangular enclosure
Hamad, F. A. W., Egelle, E., Gooneratne, S., & Russell, P. A. (2021) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2021.1913533 · Cited by 25
A comparison study on melting inside the rectangular and curved unit with a vertical heating wall
Hu, Z., Li, A., Gao, R., & Yin, H. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4754-2 · Cited by 25
Mathematical Modeling and Experimental Measurements of Shrinkage in the Casting of Metals
Trovant, M., & Argyropoulos, S. A. (1996) · Canadian Metallurgical Quarterly · doi:10.1179/cmq.1996.35.1.75 · Cited by 25
Simulation of Slag Freeze Layer Formation: Part I. Experimental Study
Guevara, F. J., & Irons, G. A. (2011) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-011-9524-3 · Cited by 24
Wang, H., Xu, H., Liu, C., Zhang, Z., Ling, X., & Jiang, F. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103222 · Cited by 24
Numerical Simulations of Thermal Energy Storage Systems with Phase Change Materials
Galione, P., Lehmkuhl, O., Rigola, J., Oliva, A., & Pérez, I. R. (2011) · ISES Solar World Congress (SWC) · doi:10.18086/swc.2011.29.07 · Cited by 24
Simulation of the Marangoni Effect and Phase Change Using the Particle Finite Element Method
Bobach, B.-J., Boman, R., Celentano, D. J., Terrapon, V. E., & Ponthot, J. (2021) · Applied Sciences · doi:10.3390/app112411893 · Cited by 23
Fteiti, M. A., & Nasrallah, S. B. (2004) · Computational Mechanics · doi:10.1007/s00466-004-0597-6 · Cited by 23
Solidification Modeling: Evolution, Benchmarks, Trends in Handling Turbulence, and Future Directions
Verma, S., & Dewan, A. (2014) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-014-0039-6 · Cited by 23
Finite volume simulation framework for die casting with uncertainty quantification
Shahane, S., Aluru, N. R., FERREIRA, P. M., Kapoor, S. G., & Vanka, S. P. (2019) · Applied Mathematical Modelling · doi:10.1016/j.apm.2019.04.045 · Cited by 23
Influence of the convective energy formulation for melting problems with enthalpy methods
König-Haagen, A., Franquet, E., Faden, M., & Brüggemann, D. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106477 · Cited by 23
Hajjar, A., Jamesahar, E., Shirivand, H., Ghalambaz, M., & Mahani, R. B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101701 · Cited by 23
Veismoradi, A., Ghalambaz, M., Shirivand, H., Hajjar, A., Mohamad, A. A., Sheremet, M. А., Chamkha, A. J., & Younis, O. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116793 · Cited by 23
Fteiti, M. A., Ghalambaz, M., Sheremet, M. А., & Ghalambaz, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2022.106586 · Cited by 23
Experimental study of enhanced melting process under ultrasonic influence
Choi, K.-J., & Hong, J. S. (1991) · Journal of Thermophysics and Heat Transfer · doi:10.2514/3.269 · Cited by 23
A finite element thermally coupled flow formulation for phase-change problems
Cruchaga, M., & Celentano, D. J. (2000) · International Journal for Numerical Methods in Fluids · doi:10.1002/1097-0363(20001030)34:4<279::aid-fld58>3.0.co;2-u · Cited by 23
Farahani, S. D., Mamoei, A. J., & Alizadeh, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109357 · Cited by 22
Cheradi, H., Haddad, Z., Iachachene, F., Mansouri, K., & Arıcı, M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110985 · Cited by 22
Blais, B., & Ilinca, F. (2018) · Computers & Fluids · doi:10.1016/j.compfluid.2018.03.037 · Cited by 22
Zhao, P., Dai, R., Li, W., Wang, Q., & Zeng, M. (2020) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2020.1793540 · Cited by 22
The Prandtl Number Effect on Melting Dominated by Natural Convection
Lim, J. S., & Bejan, A. (1992) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2911353 · Cited by 22
NUMERICAL STUDY OF CONJUGATE TRANSIENT SOLIDIFICATION IN AN ENCLOSED REGION
Viswanath, R., & Jaluria, Y. (1995) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407789508913716 · Cited by 22
Investigation of solid-state hydrogen storage performance using multiple phase change materials
Lewis, S. D., Chippar, P., & Rai, S. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117082 · Cited by 21
Enhancing PCM thermal management in multi-cycle melting-solidification
Dubert, D. C., Šeta, B., Massons, J., Gavaldà, J., Bou‐Ali, M. M., Ruíz, X., & Shevtsova, V. M. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107741 · Cited by 21
Numerical Simulation of PCM melting over a wavy surface
Kousksou, T., Mahdaoui, M., Arid, A., & Batina, J. (2014) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/hff-01-2013-0031 · Cited by 21
Numerical Modeling of Alternate Melting and Solidification
Wang, S., Faghri, A., & Bergman, T. L. (2010) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407790.2010.529024 · Cited by 21
Melting characteristics of organic phase change material in a wavy trapezoidal cavity
Haddad, Z., Iachachene, F., & Oztop, H. F. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.112132 · Cited by 21
Tang, S., He, Y., He, Y., & Wang, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114870 · Cited by 21
Mehryan, S. A. M., Ghalambaz, M., Vaezi, M., Zadeh, S. M. H., Sedaghatizadeh, N., Younis, O., Chamkha, A. J., & Abulkhair, H. A. (2021) · Applied Mathematical Modelling · doi:10.1016/j.apm.2021.03.029 · Cited by 21
Bessaïh, R., & Bouabdallah, S. (2008) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407780802084660 · Cited by 21
Tin melting: Effect of grid size and scheme on the numerical solution
Alexiades, V., Hannoun, N., & Mai, T. Z. (2003) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 21
Chabot, C., & Gosselin, L. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.10.017 · Cited by 21
Choi, B., & Woo, S.-M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.05.055 · Cited by 21
STRUCTURED MOVING GRID AND GEOMETRIC CONSERVATIONLAWS FOR FLUID FLOW COMPUTATION
Shyy, W., Pal, S., Udaykumar, H. S., & Choi, D. (1998) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407789808913993 · Cited by 21
Cruchaga, M., & Celentano, D. J. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.236 · Cited by 21
Sharma, R. K., Kumar, A., & Rakshit, D. (2025) · Energy · doi:10.1016/j.energy.2025.136836 · Cited by 20
Numerical study on 2-stage phase change heat sink for cooling of photovoltaic panel
Ding, Y. C., Klemeš, J. J., Zhao, P., Zeng, M., & Wang, Q. (2022) · Energy · doi:10.1016/j.energy.2022.123679 · Cited by 20
Melting processes of phase change materials in a horizontally placed rectangular cavity
Li, M., Jiao, Z., & Jia, P. (2022) · Journal of Fluid Mechanics · doi:10.1017/jfm.2022.751 · Cited by 20
Freile, R. O., Tano, M., & Ragusa, J. C. (2022) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2023.104785 · Cited by 20
Li, X., Zhu, Z., Xu, Z., Ma, T., Zhang, H., Liu, J., & Wang, Q. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.742 · Cited by 20
Saha, S. K. (2022) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2022.101234 · Cited by 20
Ding, Y., Wang, H., Huang, B., Hu, Y., Jiang, F. Y., & Ling, X. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.09.130 · Cited by 20
Metadata
- Authors
- Gau, C., & Viskanta, R.
- Affiliations
- Purdue University West Lafayette (US)
- Venue
- Journal of Heat Transfer
- Publisher
- Wiley
- Published
- 1986-02-01
- Volume
- 108
- Issue
- 1
- Pages
- 174-181
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2064996020
- Cited by
- 655
- References
- 0
- Citations by year
- 2026: 21 · 2025: 51 · 2024: 42 · 2023: 60 · 2022: 42 · 2021: 46 · 2020: 44 · 2019: 33 · 2018: 35 · 2017: 39 · 2016: 19 · 2015: 12 · 2014: 18 · 2013: 23 · 2012: 10
- FWCI
- 19.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ASME Journal of Heat and Mass Transfer (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Solidification and crystal growth phenomena
- Physical Sciences › Engineering › Computational Mechanics › Heat Transfer and Numerical Methods
- Keywords
- melting, solidification, gallium, natural convection, heat transfer coefficient, vertical wall, temperature fluctuations, one-dimensional model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.