Melting and Solidification of a Pure Metal on a Vertical Wall
The DOI matches its Crossref record.
Abstract
This paper reports on the role of natural convection on solid–liquid interface motion and heat transfer during melting and solidification of a pure metal (gallium) on a vertical wall. The measurements of the position of the phase-change boundary as well as of temperature distributions and temperature fluctuations were used as a qualitative indication of the natural convection flow regimes and structure in the melt during phase transformation taking place in a rectangular test cell heated or cooled from one of the vertical walls. For melting, the measured melt volume and heat transfer coefficients are correlated in terms of relevant dimensionless parameters. For solidification, the measured volume of metal solidified on the wall is compared with predictions based on a one-dimensional model.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Firstly, the melting/solidification model is validated against experimental data of melting pure Gallium in a rectangular cavity51.”
From A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications (2023) · cites this paper as [51]
Citations
Cites
Still being checked.
Cited by
Items 301–400 of 692
Bondareva, N. S., & Sheremet, M. А. (2023) · International Journal of Thermofluids · doi:10.1016/j.ijft.2023.100374 · Cited by 20
Alam, M. T., Kumar, R., & Gupta, A. K. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107478 · Cited by 19
Impact of Tube Bundle Placement on the Thermal Charging of a Latent Heat Storage Unit
Ghalambaz, M., Eisapour, A. H., Mohammed, H. I., Islam, M. S., Younis, O., Talebizadehsardari, P., & Yaïci, W. (2021) · Energies · doi:10.3390/en14051289 · Cited by 19
Melissari, B., & Argyropoulos, S. A. (2005) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-005-0060-x · Cited by 19
Sebbar, E. H., Oubenmoh, S., Msaad, A. A., Hamdaoui, S., Mahdaoui, M., & Rhafiki, T. E. (2023) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4062612 · Cited by 18
Yehya, A., Adebayo, P., & Naji, H. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110275 · Cited by 18
Tiji, M. E., Rezaei, S., Hosseinzadeh, K., Kaplan, S., Talebizadehsardari, P., & Keshmiri, A. (2025) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.105701 · Cited by 18
A numerical investigation of some key factors for the simulation of convection-dominated melting
Beust, C., Franquet, E., Bédécarrats, J.-P., & García, P. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106687 · Cited by 18
Pattern selection for thermocapillary flow in rectangular containers in microgravity
Sánchez, P., Porter, J., Ezquerro, J. M., Tinao, I., & Laverón-Simavilla, A. (2022) · Physical Review Fluids · doi:10.1103/physrevfluids.7.053502 · Cited by 18
Martínez-Figueira, N., Sánchez, P., Bello, A., Olfe, K. S., & Rodríguez, J. (2023) · Physics of Fluids · doi:10.1063/5.0158683 · Cited by 18
Kachalov, A. B., García-Roco, R., Sánchez, P., Olfe, K. S., & Bello, A. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124806 · Cited by 18
Melting characteristics of paraffin wax in a rectangular cavity under steady rotations
Farsani, R. Y., Raeiszadeh, F., Jahangiri, M., & Afrand, M. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.08.004 · Cited by 18
A finite element model for convection‐dominated melting and solidification problems
Gong, Z., & MUJUMDAR, A. S. (1998) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/09615539810213179 · Cited by 18
A note on possible flow instabilities in melting from the side
Quéré, P. L., & Gobin, D. (1999) · International Journal of Thermal Sciences · doi:10.1016/s0035-3159(99)80039-7 · Cited by 18
A Numerical Study of Heat Performance of Multi-PCM Brick in a Heat Storage Building
Bondareva, N. S., & Sheremet, M. А. (2023) · Mathematics · doi:10.3390/math11132825 · Cited by 17
Alam, M. T., Raj, A., Singh, L. K., & Gupta, A. K. (2024) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2024.102655 · Cited by 17
Effect of fin configuration on the early stage of the melting process of a phase change material
Junior, L. G. S., Ribeiro, G. B., & Mancin, S. (2024) · International Journal of Thermofluids · doi:10.1016/j.ijft.2024.100957 · Cited by 17
Investigation of heat transfer during melting of a PCM by a U-shaped heat source
Bashar, M., & Siddiqui, K. (2017) · International Journal of Energy Research · doi:10.1002/er.3770 · Cited by 17
Thermal Charging Optimization of a Wavy-Shaped Nano-Enhanced Thermal Storage Unit
Ghalambaz, M., Mehryan, S. A. M., Hajjar, A., Shdaifat, M. Y. A., Younis, O., Talebizadehsardari, P., & Yaïci, W. (2021) · Molecules · doi:10.3390/molecules26051496 · Cited by 17
Thermal energy storage in a confined cylindrical heat source filled with phase change materials
Sharma, A., Trivedi, M., Agarwal, K., & Nirmalkar, N. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121603 · Cited by 17
Dynamics of PCM melting driven by a constant heat flux at the free surface in microgravity
García-Roco, R., Sánchez, P., Bello, A., Olfe, K. S., & Rodríguez, J. (2024) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.102378 · Cited by 17
Melting of phase change material from an isothermal vertical wall in a semi-enclosure
Li, S., Sun, Z., Xu, B., & Hong, Y. E. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.101 · Cited by 17
Co-simulation methodology of a hybrid latent-heat thermal energy storage unit
Pernsteiner, D., Kasper, L., Schirrer, A., Hofmann, R., & Jakubek, S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115495 · Cited by 17
An experimental study of accelerating phase change heat transfer
Oh, Y.-K., Park, S., & Cha, K.-O. (2001) · KSME International Journal · doi:10.1007/bf03185148 · Cited by 17
Avnaim, M. H., Levy, A., Mikhailovich, B., Ben‐David, O., & Azulay, A. (2016) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4033700 · Cited by 17
Hamad, F. A. W., Egelle, E., Gooneratne, S., & Russell, P. A. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.101865 · Cited by 16
He, K., Zhao, Y., & Wang, L. (2023) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2023.104562 · Cited by 16
A Fully Implicit Enthalpy-Porosity Model for Phase-Change
de Lemos, M. J. S., & Hodierne, A. J. U. (2023) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4063732 · Cited by 16
Study on thermal contact resistance at liquid–solid interface based on fractal theory
Li, J., Zhu, Q., & Sun, J. (2021) · AIP Advances · doi:10.1063/5.0076323 · Cited by 16
Bria, A., Raillani, B., Chaatouf, D., Salhi, M., Amraqui, S., & Mezrhab, A. (2022) · International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET) · doi:10.1109/iraset52964.2022.9738247 · Cited by 16
Numerical investigation of the melting process of gallium under inclination and partial heating
Rivero, M., Orozco, S. L., & Beltrán, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2022.106510 · Cited by 16
Wang, C., Sugiura, T., Mobedi, M., & Chen, H. (2023) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/hff-09-2022-0504 · Cited by 16
Koronio, E., Sharar, D. J., Spector, M. S., Oren, G., Shockner, T., Regev, O., & Ziskind, G. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124175 · Cited by 16
Saleem, M., & Faheem, Z. (2024) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13079-7 · Cited by 16
Numerical modelling of phase-change material used for PV panels cooling
Sellami, A., Otmani, R. E., Kandoussi, K., Jouad, M. E., Hajjaji, A., & Boutaous, M. (2017) · The European Physical Journal Plus · doi:10.1140/epjp/i2017-11817-9 · Cited by 16
Modelling melting and grain destruction phenomena during globular equiaxed solidification
Zhang, H., Wu, M., Schumacher, P., Rodrigues, C. M. G., Ludwig, A., & Kharicha, A. (2021) · Applied Mathematical Modelling · doi:10.1016/j.apm.2021.04.024 · Cited by 16
Cyclic phase change with fluid flow
Voller, V. R., Felix, P., & Swaminathan, C. R. (1996) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/09615539610123450 · Cited by 16
Wu, D., Chen, J., & Roskilly, A. P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.087 · Cited by 16
Enthalpy based formulations for phase-change problems with application to g-jitter
Shyy, W., & Rao, M. M. (1993) · AIAA Thermophysics Conference · doi:10.2514/6.1993-2831 · Cited by 16
Kansara, K., Singh, S., Dwivedi, N. K., & Khodachenko, M. L. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.05.005 · Cited by 15
NUMERICAL SIMULATION OF NATURAL CONVECTION MELTING IN 2D AND 3D ENCLOSURES
Bondareva, N. S. (2018) · Journal of Thermal Engineering · doi:10.18186/thermal.513015 · Cited by 15
Ghalambaz, M., Mehryan, S. A. M., Hajjar, A., Younis, O., Sheremet, M. А., Pour, M. S., & Hulme-Smith, C. N. (2021) · Molecules · doi:10.3390/molecules26051235 · Cited by 15
Laouer, A., & Al‐Farhany, K. (2022) · Heat Transfer · doi:10.1002/htj.22576 · Cited by 15
Computational thermal analysis of a latent heat storage unit augmented with porous fins
Shank, K. J., & Tiari, S. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.103383 · Cited by 15
Kadri, S., Dhifaoui, B., Dutil, Y., Jabrallah, S. B., & Rousse, D. R. (2015) · International Journal of Thermophysics · doi:10.1007/s10765-015-1935-y · Cited by 15
The S curve of energy storage by melting
Bejan, A., Ziaei, S., & Lorente, S. (2014) · Journal of Applied Physics · doi:10.1063/1.4894869 · Cited by 15
Begum, L., Hasan, M., & Vatistas, G. H. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.035 · Cited by 15
Bondareva, N. S., Ghalambaz, M., & Sheremet, M. А. (2021) · Energies · doi:10.3390/en14051389 · Cited by 15
Numerical study on melting performance improvement with fractal tree-shaped fins
Ma, B., Zhang, X., Wang, L., He, K., & Li, D. (2022) · Physics of Fluids · doi:10.1063/5.0084810 · Cited by 15
A Two-Temperature Model for Solid/Liquid Phase Change in Metal Foams
Krishnan, S., Murthy, J. Y., & Garimella, S. V. (2004) · Education and New Developments 2022 – Volume I · doi:10.1115/ht-fed2004-56337 · Cited by 15
Pal, A., Assilbekov, B. K., & Saha, B. B. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127601 · Cited by 14
Mathematical simulation of melting inside a square cavity with a local heat source
Bondareva, N. S., & Sheremet, M. А. (2016) · Thermophysics and Aeromechanics · doi:10.1134/s0869864316040089 · Cited by 14
Ayoubloo, K. A., Bazgirkhoob, H., Asareh, M., Noghrehabadi, A., & Moosavi, R. (2022) · Alexandria Engineering Journal · doi:10.1016/j.aej.2022.11.014 · Cited by 14
Experimental and Numerical Investigation of Lauric Acid Melting at Suboptimal Inclines
Troxler, C. J., Freeman, T. B., Rodríguez, R. M., & Boetcher, S. K. S. (2023) · ASME Open Journal of Engineering · doi:10.1115/1.4056348 · Cited by 14
Impact of traveling permanent magnets on low temperature metal melting in a cuboid
Ben‐David, O., Levy, A., Mikhailovich, B., Avnaim, M. H., & Azulay, A. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.04.017 · Cited by 14
Smoothed iterative enthalpy approach for solid-liquid phase change
Kasibhatla, R. R., & Brüggemann, D. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.106187 · Cited by 14
Ying, X., Huang, W., Liu, W., Liu, G., Li, J., & Yang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119122 · Cited by 14
Analysis of the gallium melting problem with different heating configurations
Çolak, E., Oztop, H. F., & Ekici, Ö. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104651 · Cited by 14
Hatakeyama, T., & Ishizuka, M. (2013) · Heat Transfer Engineering · doi:10.1080/01457632.2013.876340 · Cited by 14
Satbhai, O., Roy, S., & Ghosh, S. (2018) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4040655 · Cited by 14
A NUMERICAL STUDY OF ANISOTROPY AND CONVECTION DURING SOLIDIFICATION
Kaenton, J., Davis, G. D. V., Leonardi, E., & Leong, S. S. (2002) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/104077902753541032 · Cited by 14
Flow-dynamics induced thermal management of crude oil wax melting: Lattice Boltzmann modeling
Yip, Y. H., Soh, A. K., & Foo, J. J. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.09.033 · Cited by 13
Šeta, B., Sánchez, P., Dubert, D. C., Massons, J., Gavaldà, J., Porter, J., Bou‐Ali, M. M., Ruíz, X., & Shevtsova, V. M. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.107198 · Cited by 13
Melting of a phase change material in a horizontal annulus with discrete heat sources
Mirzaei, H., Dadvand, A., Mastiani, M., Sebti, S., & Kashani, S. (2013) · Thermal Science · doi:10.2298/tsci121024094m · Cited by 13
Zhang, X., Wang, L., & Li, D. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.106917 · Cited by 13
Mansutti, D., & Bucchignani, E. (2011) · Applications of Mathematics · doi:10.1007/s10492-011-0012-5 · Cited by 13
Casella, E., & Giangi, M. (2001) · Mathematical Methods in the Applied Sciences · doi:10.1002/mma.233 · Cited by 13
Temporal accuracy analysis of phase change convection simulations using the JFNK‐SIMPLE algorithm
Evans, K. J., & Knoll, D. A. (2007) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.1478 · Cited by 13
Minakov, A. V., Викторович, П. М., Platonov, D. V., & Khatsayuk, M. Y. (2015) · Computational Mathematics and Mathematical Physics · doi:10.1134/s096554251512009x · Cited by 13
Hu, N., Li, Z., Zhang, R., & Fan, L. (2019) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4045758 · Cited by 13
A threshold for onset of natural convection in binary metallic alloys
Koster, J. N., & Derebail, R. (1997) · Heat and Mass Transfer · doi:10.1007/s002310050150 · Cited by 13
Enhancing the melting of phase change materials via convective flows and container geometry
Kachalov, A. B., Sánchez, P., Fernandez, J. J., & Olfe, K. S. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107922 · Cited by 12
Sârbu, I. (2021) · Springer eBooks · doi:10.1007/978-3-030-64781-0_7 · Cited by 12
Wu, W. T., Chen, J., & Kang, X. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113626 · Cited by 12
Liu, H.-Y., Zhang, L., Wu, C., & Li, Y. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124911 · Cited by 12
Effect of thermal anisotropy on binary alloy dendrite growth
Jakhar, A., Bhattacharya, A., Rath, P., & Mahapatra, S. K. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.141 · Cited by 12
Ahmadpour, V., Mirzaei, I., Rezazadeh, S., & Ahmadi, N. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1906-5 · Cited by 12
Farsani, R. Y., Mahmoudi, A. H., & Jahangiri, M. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.100453 · Cited by 12
Magnetoconvection driven melting of nanoenriched paraffin wax in cubical enclosure
Harish, R. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107014 · Cited by 12
Oh, Y.-K., & Yang, H. D. (2006) · Key engineering materials · doi:10.4028/www.scientific.net/kem.324-325.1075 · Cited by 12
EXPERIMENTAL STUDIES OF MELTING PHENOMENA FROM A CONSTANT HEAT FLUX VERTICAL PLATE
Choi, K.-J., & Hong, J. S. (1990) · Experimental Heat Transfer · doi:10.1080/08916159008946377 · Cited by 12
Convective heat-transfer measurements in liquid metals under different fluid flow conditions
Sismanis, P. G., & Argyropoulos, S. A. (1988) · Metallurgical Transactions B · doi:10.1007/bf02651410 · Cited by 12
Effects of liquid superheat during solidification of pure metals in a square cavity
Rady, M., Satyamurty, V. V., & Mohanty, L. A. K. (1997) · Heat and Mass Transfer · doi:10.1007/s002310050151 · Cited by 12
Numerical modeling at the IKZ: an overview and outlook
Miller, W., & Schröder, W. (2001) · Journal of Crystal Growth · doi:10.1016/s0022-0248(01)01348-3 · Cited by 12
Solid-Liquid Phase Change in the Presence of Gas Phase: Numerical Modeling and Validation
Kewalramani, R. G., Pose, S., Riehl, I., & Fieback, T. M. (2020) · Journal of Fluid Flow Heat and Mass Transfer · doi:10.11159/jffhmt.2020.001 · Cited by 11
König-Haagen, A., Franquet, E., Faden, M., & Brüggemann, D. (2021) · Energies · doi:10.3390/en14020354 · Cited by 11
Liu, W., & Huang, Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108252 · Cited by 11
Bondareva, N. S., & Sheremet, M. А. (2021) · Fluids · doi:10.3390/fluids6070258 · Cited by 11
Bharanitharan, K. J., Kang, S., Sanjay, K. J., & Senthilkumar, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105580 · Cited by 11
Effect of the length ratio on thermal energy storage in wedge-shaped enclosures
Hu, Z., Li, A., Gao, R., & Yin, H. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-3843-y · Cited by 11
Boudjemline, A., Togun, H., Mohammed, H. I., Mahdi, J. M., Khedher, N. B., Talebizadehsardari, P., & Keshmiri, A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111903 · Cited by 10
Probing the melting dynamics in a phase change Rayleigh–Bénard system under low gravity conditions
Kansara, K., Singh, S., Dwivedi, N. K., & Khodachenko, M. L. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.126073 · Cited by 10
Effect of Uniform Magnetic Field on Melting at Various Rayleigh Numbers
Dirbude, S., & Maurya, V. K. (2019) · Emerging Science Journal · doi:10.28991/esj-2019-01189 · Cited by 10
Ghalambaz, M., Shirivand, H., Ayoubloo, K. A., Mehryan, S. A. M., Younis, O., Talebizadehsardari, P., & Yaïci, W. (2021) · Molecules · doi:10.3390/molecules26061605 · Cited by 10
Virk, A. S., & Park, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117961 · Cited by 10
Jafaryar, M., & Sheikholeslami, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107864 · Cited by 10
Experimental Investigation and Theoretical Modeling of Ice-Melting Processes
Hosseini, R., & Rahaeifard, M. (2009) · Experimental Heat Transfer · doi:10.1080/08916150902949873 · Cited by 10
Goyal, P., Dutta, A., Verma, V., Thangamani, I., & Singh, R. K. (1986) · Cited by 10
Prediction of melting process driven by conduction-convection in a cavity heated from the side
Kim, S., Kim, M. C., & Lee, S. (2001) · Korean Journal of Chemical Engineering · doi:10.1007/bf02706373 · Cited by 10
Evaluation of solid-liquid interface profile during continuous casting by a spline based formalism
Das, S. K. (2001) · Bulletin of Materials Science · doi:10.1007/bf02708633 · Cited by 10
Metadata
- Authors
- Gau, C., & Viskanta, R.
- Affiliations
- Purdue University West Lafayette (US)
- Venue
- Journal of Heat Transfer
- Publisher
- Wiley
- Published
- 1986-02-01
- Volume
- 108
- Issue
- 1
- Pages
- 174-181
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2064996020
- Cited by
- 655
- References
- 0
- Citations by year
- 2026: 21 · 2025: 51 · 2024: 42 · 2023: 60 · 2022: 42 · 2021: 46 · 2020: 44 · 2019: 33 · 2018: 35 · 2017: 39 · 2016: 19 · 2015: 12 · 2014: 18 · 2013: 23 · 2012: 10
- FWCI
- 19.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ASME Journal of Heat and Mass Transfer (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Solidification and crystal growth phenomena
- Physical Sciences › Engineering › Computational Mechanics › Heat Transfer and Numerical Methods
- Keywords
- melting, solidification, gallium, natural convection, heat transfer coefficient, vertical wall, temperature fluctuations, one-dimensional model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.