Melting and Solidification of a Pure Metal on a Vertical Wall
The DOI matches its Crossref record.
Abstract
This paper reports on the role of natural convection on solid–liquid interface motion and heat transfer during melting and solidification of a pure metal (gallium) on a vertical wall. The measurements of the position of the phase-change boundary as well as of temperature distributions and temperature fluctuations were used as a qualitative indication of the natural convection flow regimes and structure in the melt during phase transformation taking place in a rectangular test cell heated or cooled from one of the vertical walls. For melting, the measured melt volume and heat transfer coefficients are correlated in terms of relevant dimensionless parameters. For solidification, the measured volume of metal solidified on the wall is compared with predictions based on a one-dimensional model.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Firstly, the melting/solidification model is validated against experimental data of melting pure Gallium in a rectangular cavity51.”
From A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications (2023) · cites this paper as [51]
Citations
Cites
Still being checked.
Cited by
Brent, A. D., Voller, V. R., & Reid, K. J. (1988) · Numerical Heat Transfer · doi:10.1080/10407788808913615 · Cited by 1,699
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
A review on phase-change materials: Mathematical modeling and simulations
Dutil, Y., Rousse, D. R., Salah, N. B., Lassue, S., & Zalewski, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.011 · Cited by 676
Kamkari, B., Shokouhmand, H., & Bruno, F. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.014 · Cited by 434
A Reynolds stress model for near-wall turbulence
Durbin, P. A. (1993) · Journal of Fluid Mechanics · doi:10.1017/s0022112093001259 · Cited by 429
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Xu, Y., Ren, Q., Zheng, Z.-J., & He, Y.-L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.019 · Cited by 393
Sarbu, I., & Dorca, A. (2019) · International Journal of Energy Research · doi:10.1002/er.4196 · Cited by 347
Pizzolato, A., Sharma, A., Maute, K., Sciacovelli, A., & Verda, V. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.050 · Cited by 344
Shokouhmand, H., & Kamkari, B. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.06.010 · Cited by 343
Numerical study on melting of paraffin wax with Al2O3 in a square enclosure
Arasu, A. V., & Mujumdar, A. S. (2012) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2011.09.013 · Cited by 330
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Shamberger, P. J., & Bruno, N. M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113955 · Cited by 269
Experimental and numerical study of melting in a cylinder
Jones, B. J., Sun, D., Krishnan, S., & Garimella, S. V. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.01.006 · Cited by 258
Numerical simulation on phase-change thermal storage/release in a plate-fin unit
Ye, W.-B., Zhu, D.-S., & Wang, N. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.07.035 · Cited by 251
ELAFINT: A MIXED EULERIAN-LAGRANGIAN METHOD FOR FLUID FLOWS WITH COMPLEX AND MOVING BOUNDARIES
Udaykumar, H. S., Shyy, W., & Rao, M. M. (1996) · International Journal for Numerical Methods in Fluids · doi:10.1002/(sici)1097-0363(19960430)22:8<691::aid-fld371>3.0.co;2-u · Cited by 241
Sheikholeslami, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104954 · Cited by 234
Methods of heat transfer intensification in PCM thermal storage systems: Review paper
Al-Maghalseh, M., & Mahkamov, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.064 · Cited by 225
Numerical simulation of a PCM packed bed system: A review
de Gracia, A., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.092 · Cited by 213
Xu, Y., Li, M.-J., Zheng, Z.-J., & Xue, X.-D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.082 · Cited by 204
Rösler, F., & Brüggemann, D. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0866-9 · Cited by 194
Chamkha, A. J., Doostanidezfuli, A., Izadpanahi, E., & Ghalambaz, M. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2016.10.009 · Cited by 192
Ghalambaz, M., Doostani, A., Chamkha, A. J., & Ismael, M. A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.09.045 · Cited by 188
Numerical investigation of PCM melting process in sleeve tube with internal fins
Wang, P., Yao, H., Lan, Z., Peng, Z., Huang, Y., & Ding, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.12.042 · Cited by 188
Melting in a side heated tall enclosure by a uniformly dissipating heat source
Pal, D., & Joshi, Y. K. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00116-2 · Cited by 188
Lattice Boltzmann Model for Anisotropic Liquid-Solid Phase Transition
Miller, W., Succi, S., & Mansutti, D. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.3578 · Cited by 184
Ghalambaz, M., Zadeh, S. M. H., Mehryan, S. A. M., Pop, I. V., & Wen, D. (2019) · Applied Mathematical Modelling · doi:10.1016/j.apm.2019.09.015 · Cited by 182
A Two-Temperature Model for Solid-Liquid Phase Change in Metal Foams
Krishnan, S., Murthy, J. Y., & Garimella, S. V. (2005) · Journal of Heat Transfer · doi:10.1115/1.2010494 · Cited by 180
Ghalambaz, M., & Zhang, J. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118832 · Cited by 177
Yao, L. S., & Prusa, J. (1989) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70211-9 · Cited by 174
Ghalambaz, M., Doostani, A., Izadpanahi, E., & Chamkha, A. J. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.01.010 · Cited by 173
Ye, W., & Arıcı, M. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106780 · Cited by 173
An experimental investigation of the melting process in a rectangular enclosure
Wang, Y., Amiri, A., & Vafai, K. (1999) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00024-1 · Cited by 169
Modelling liquid–solid phase changes with melt convection
Dantzig, J. A. (1989) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620280805 · Cited by 168
Numerical investigation of the phase change process of low melting point metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.04.109 · Cited by 160
Ye, W.-B., & Arıcı, M. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106952 · Cited by 160
Melting of nanoparticle-enhanced paraffin wax in a rectangular enclosure with partially active walls
Arıcı, M., Tütüncü, E., Kan, M., & Karabay, H. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.08.017 · Cited by 158
Liquid metal biomaterials: a newly emerging area to tackle modern biomedical challenges
Yi, L., & Liu, J. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271090 · Cited by 156
Zheng, Z., Xu, Y., & Li, M.-J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.126 · Cited by 155
Ye, W., & Arıcı, M. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106746 · Cited by 154
Solidification of a pure metal at a vertical wall in the presence of liquid superheat
Wolff, F., & Viskanta, R. (1988) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(88)90285-2 · Cited by 154
Self-citationFeng, Y., Li, H., Li, L., Bu, L., & Wang, T. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.10.048 · Cited by 148
Gao, D., & Chen, Z. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.11.010 · Cited by 144
FINITE DIFFERENCE SOLUTIONS OF SOLIDIFICATION PHASE CHANGE PROBLEMS: TRANSFORMED VERSUS FIXED GRIDS
Lacroix, M., & Voller, V. R. (1990) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407799008961731 · Cited by 144
Bondareva, N. S., Buonomo, B., Manca, O., & Sheremet, M. А. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.045 · Cited by 142
Qaiser, R., Khan, M. M., Khan, L. A., & Irfan, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.102161 · Cited by 142
Chakraborty, S. K., & Chatterjee, D. (2007) · Journal of Fluid Mechanics · doi:10.1017/s0022112007008555 · Cited by 139
Influence of Mushy Zone Constant on Thermohydraulics of a PCM
Kumar, M., & Devanuri, J. K. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.074 · Cited by 134
Heat transfer inside cooling system based on phase change material with alumina nanoparticles
Bondareva, N. S., Buonomo, B., Manca, O., & Sheremet, M. А. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.002 · Cited by 132
Sun, X., Zhang, Q., Medina, M. A., & Lee, K. O. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.078 · Cited by 126
Bondareva, N. S., & Sheremet, M. А. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.040 · Cited by 126
Gong, Z., Devahastin, S., & MUJUMDAR, A. S. (1999) · Applied Thermal Engineering · doi:10.1016/s1359-4311(99)00003-4 · Cited by 126
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.08.001 · Cited by 124
Tiari, S., Hockins, A., & Mahdavi, M. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100999 · Cited by 122
Effect of multiple phase change materials (PCMs) slab configurations on thermal energy storage
Shaikh, S., & Lafdi, K. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.12.012 · Cited by 122
RESOLVING THE CONTROVERSY OVER TIN AND GALLIUM MELTING IN A RECTANGULAR CAVITY HEATED FROM THE SIDE
Hannoun, N., Alexiades, V., & Zee, T. (2003) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/713836378 · Cited by 122
Liu, S., Li, Y., & Zhang, Y. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.032 · Cited by 121
Numerical study of the melting of nano-enhanced phase change material in a square cavity
Sebti, S., Mastiani, M., Mirzaei, H., Dadvand, A., Kashani, S., & Hosseini, S. A. (2013) · Journal of Zhejiang University. Science A · doi:10.1631/jzus.a1200208 · Cited by 120
Melting of phase change materials in a trapezoidal cavity: Orientation and nanoparticles effects
Iachachene, F., Haddad, Z., Oztop, H. F., & Abu‐Nada, E. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.03.051 · Cited by 119
Ebrahimi, A., Kleijn, C. R., & Richardson, I. M. (2019) · Energies · doi:10.3390/en12224360 · Cited by 118
A study of the effect of ultrasonic vibrations on phase-change heat transfer
Oh, Y.-K., Park, S. H., & Cho, Y. I. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00162-x · Cited by 118
Numerical simulation of convection/diffusion phase change problems—a review
SAMARSKII, A. A., Vabishchevich, P. N., Iliev, O., & Churbanov, A. G. (1993) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(93)90071-d · Cited by 116
Vogel, J., & Thess, A. D. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.032 · Cited by 112
Mallya, N., & Haussener, S. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120525 · Cited by 110
Mehryan, S. A. M., Vaezi, M., Sheremet, M. А., & Ghalambaz, M. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119385 · Cited by 108
A state-of-the-art review on hybrid heat pipe latent heat storage systems
Naghavi, M. S., Ong, K. S., Mehrali, M., Badruddin, I. A., & Metselaar, H. S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.044 · Cited by 108
Effect of Mushy Zone Constant on the Melting of a Solid-Liquid PCM Under Hyper-Gravity Conditions
Singh, V. K., & Patel, A. (2022) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2022.105993 · Cited by 107
Mehryan, S. A. M., Tahmasebi, A., Izadi, M., & Ghalambaz, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119184 · Cited by 105
Lei, Y., Murakawa, H., Shi, Y., & Li, X. Y. (2001) · Computational Materials Science · doi:10.1016/s0927-0256(01)00143-4 · Cited by 103
Amidu, M. A., Ali, M., Alkaabi, A. K., & Addad, Y. (2023) · Scientific Reports · doi:10.1038/s41598-023-34907-0 · Cited by 101
Flow and heat transfer in convection-dominated melting in a rectangular cavity heated from below
Gong, Z., & MUJUMDAR, A. S. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00374-8 · Cited by 98
Effect of Solid Subcooling on Natural Convection Melting of a Pure Metal
Beckermann, C., & Viskanta, R. (1989) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3250693 · Cited by 96
Self-citationAllouhi, A., Msaad, A. A., Amine, M. B., Saidur, R., Mahdaoui, M., Kousksou, T., Pandey, A. K., Jamil, A., Moujibi, N., & Benbassou, A. (2018) · Solar Energy · doi:10.1016/j.solener.2018.06.096 · Cited by 95
Numerical methods for solid-liquid phase-change problems
Zeneli, M., Nikolopoulos, A., Karellas, S., & Nikolopoulos, N. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819955-8.00007-7 · Cited by 94
Effect of microstructure on melting in metal-foam/paraffin composite phase change materials
Abishek, S., King, A., Nadim, N., & Mullins, B. J. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.054 · Cited by 94
Melting of nano-PCM in an enclosed space: Scale analysis and heatline tracking
Al-Jethelah, M. S. M., Tasnim, S. H., Mahmud, S., & Dutta, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.11.106 · Cited by 92
Novel enthalpy method for modeling of PCM melting accompanied by sinking of the solid phase
Kozak, Y., & Ziskind, G. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.088 · Cited by 90
Influence of internal convection during microwave thawing of cylinders
Basak, T., & Ayappa, K. G. (2001) · AIChE Journal · doi:10.1002/aic.690470408 · Cited by 90
Briache, A., Afass, A., Ouardouz, M., Ahachad, M., & Mahdaoui, M. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.125730 · Cited by 87
Xu, H., Wang, Y., & Han, X. (2019) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/hff-02-2019-0094 · Cited by 86
Effect of PCM thickness on the performance of the finned PV/PCM system
Bria, A., Raillani, B., Chaatouf, D., Salhi, M., Amraqui, S., & Mezrhab, A. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.409 · Cited by 86
3D numerical and experimental study of gallium melting in a rectangular container
Ben‐David, O., Levy, A., Mikhailovich, B., & Azulay, A. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.07.058 · Cited by 83
Ng, K. W., Gong, Z. X., & MUJUMDAR, A. S. (1998) · International Communications in Heat and Mass Transfer · doi:10.1016/s0735-1933(98)00050-5 · Cited by 83
Chaatouf, D., Salhi, M., Raillani, B., Amraqui, S., & Mezrhab, A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102874 · Cited by 80
Gaedtke, M., Abishek, S., Mead‐Hunter, R., King, A., Mullins, B. J., Nirschl, H., & Krause, M. J. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119870 · Cited by 79
Ezquerro, J. M., Sánchez, P., Bello, A., Rodríguez, J., Lapuerta, V., & Laverón-Simavilla, A. (2020) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2020.104529 · Cited by 79
Bondareva, N. S., & Sheremet, M. А. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.10.031 · Cited by 78
Ye, W., Zhu, D., & Wang, N. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.03.002 · Cited by 77
A comprehensive benchmark of fixed-grid methods for the modeling of melting
König-Haagen, A., Franquet, E., Pernot, E., & Brüggemann, D. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.04.008 · Cited by 77
Visualization of liquid-solid interface morphologies in gallium subject to natural convection
Campbell, T. A., & Koster, J. N. (1994) · Journal of Crystal Growth · doi:10.1016/0022-0248(94)90318-2 · Cited by 77
Directional Solidification and Melting of Eutectic GaIn
Koster, J. N. (1999) · Crystal Research and Technology · doi:10.1002/(sici)1521-4079(199911)34:9<1129::aid-crat1129>3.0.co;2-p · Cited by 76
COMPUTATION OF HEAT TRANSFER DURING MELTING OF A PURE SUBSTANCE FROM AN ISOTHERMAL WALL
Lacroix, M. (1989) · Numerical Heat Transfer Part B Fundamentals · doi:10.1080/10407798908944900 · Cited by 73
Ghalambaz, M., Doostanidezfuli, A., Zargartalebi, H., & Chamkha, A. J. (2017) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2016.1244397 · Cited by 72
Barthwal, M., Dhar, A., & Powar, S. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01268 · Cited by 71
Numerical study for enhancement of solidification of phase change materials using trapezoidal cavity
Sharma, R. K., Ganesan, P. B., Sahu, J. N., Metselaar, H. S. C., & Mahlia, T. M. I. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.08.009 · Cited by 71
Boukani, N. H., Dadvand, A., & Chamkha, A. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.09.056 · Cited by 71
Miller, W. (2001) · Journal of Crystal Growth · doi:10.1016/s0022-0248(01)01353-7 · Cited by 70
Experimental analysis of the solidification of Sn–3 wt.%Pb alloy under natural convection
Hachani, L., Saadi, B., Wang, X., Nouri, A., Zaïdat, K., Belgacem-Bouzida, A., Ayouni-Derouiche, L., Raimondi, G., & Fautrelle, Y. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.11.054 · Cited by 70
Three-dimensional PCM melting in a vertical cylindrical enclosure including the effects of tilting
Sharifi, N., Robak, C. W., Bergman, T. L., & Faghri, A. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.070 · Cited by 69
Bondareva, N. S., & Sheremet, M. А. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.06.050 · Cited by 69
Metadata
- Authors
- Gau, C., & Viskanta, R.
- Affiliations
- Purdue University West Lafayette (US)
- Venue
- Journal of Heat Transfer
- Publisher
- Wiley
- Published
- 1986-02-01
- Volume
- 108
- Issue
- 1
- Pages
- 174-181
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2064996020
- Cited by
- 655
- References
- 0
- Citations by year
- 2026: 21 · 2025: 51 · 2024: 42 · 2023: 60 · 2022: 42 · 2021: 46 · 2020: 44 · 2019: 33 · 2018: 35 · 2017: 39 · 2016: 19 · 2015: 12 · 2014: 18 · 2013: 23 · 2012: 10
- FWCI
- 19.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ASME Journal of Heat and Mass Transfer (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Solidification and crystal growth phenomena
- Physical Sciences › Engineering › Computational Mechanics › Heat Transfer and Numerical Methods
- Keywords
- melting, solidification, gallium, natural convection, heat transfer coefficient, vertical wall, temperature fluctuations, one-dimensional model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.