The DOI matches its Crossref record; 109 of the 109 references it cites were found in a registry or an index.
Integrated Sustainable Life Cycle Design: A Review
Abstract
Product design is one of the most important sectors influencing global sustainability, as almost all the products consumed by people are outputs of the product development process. In particular, early design decisions can have a very significant impact on sustainability. These decisions not only relate to material and manufacturing choices but have a far-reaching effect on the product’s entire life cycle, including transportation, distribution, and end-of-life logistics. However, key challenges have to be overcome to enable eco-design methods to be applicable in early design stages. Lack of information models, semantic interoperability, methods to influence eco-design thinking in early stages, measurement science and uncertainty models in eco-decisions, and ability to balance business decisions and eco-design methodology are serious impediments to realizing sustainable products and services. Therefore, integrating downstream life cycle data into eco-design tools is essential to achieving true sustainable product development. Our review gives an overview of related research and positions early eco-design tools and decision support as a key strategy for the future. By merging sustainable thinking into traditional design methods, this review provides a framework for ongoing research, as well as encourages research collaborations among the various communities interested in sustainable product realization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From a literature review to a conceptual framework for sustainable supply chain management
Seuring, S., & Müller, M. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.020 · Cited by 6,341
Green supply-chain management: a state-of-the-art literature review
Srivastava, S. K. (2007) · International Journal of Management Reviews · doi:10.1111/j.1468-2370.2007.00202.x · Cited by 3,984
Knowledge systems for sustainable development
Cash, D. W., Clark, W. C., Alcock, F., Dickson, N. M., Eckley, N., Guston, D. H., Jäger, J., & Mitchell, R. B. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1231332100 · Cited by 3,660
Climate Change 2023 Synthesis Report
(2024) · Climate Change and Law Collection · doi:10.1163/9789004322714_cclc_2023-0258-1193 · Cited by 2,341
(1992) · Choice Reviews Online · doi:10.5860/choice.30-0323 · Cited by 2,159
Confirmation of a measurement model for green supply chain management practices implementation
Zhu, Q., Sarkis, J., & Lai, K.-H. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.11.029 · Cited by 1,553
A strategic decision framework for green supply chain management
Sarkis, J. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00062-8 · Cited by 1,403
Allenby, B., & Graedel, T. E. (1995) · Cited by 1,192
Lee, H. L. (2024) · PubMed · doi:10.58140/gsb-6021 · Cited by 1,190
Designing the green supply chain
Beamon, B. M. (1999) · Logistics Information Management · doi:10.1108/09576059910284159 · Cited by 1,160
Production planning and control for remanufacturing: industry practice and research needs
Guide, V. D. R. (2000) · Journal of Operations Management · doi:10.1016/s0272-6963(00)00034-6 · Cited by 1,098
Ilgin, M. A., & Gupta, S. M. (2010) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.09.037 · Cited by 1,015
Remanufacturing as a Marketing Strategy
Atasu, A., Sarvary, M., & Van Wassenhove, L. N. (2008) · Management Science · doi:10.1287/mnsc.1080.0893 · Cited by 951
The Green Supply Chain: Integrating Suppliers into Environmental Management Processes
Walton, S. V., Handfield, R. B., & Melnyk, S. A. (1998) · International Journal of Purchasing and Materials Management · doi:10.1111/j.1745-493x.1998.tb00042.x · Cited by 876
A Handbook of Industrial Ecology
(2002) · Edward Elgar Publishing eBooks · doi:10.4337/9781843765479 · Cited by 857
Managing New and Remanufactured Products
Ferrer, G., & Swaminathan, J. M. (2006) · Management Science · doi:10.1287/mnsc.1050.0465 · Cited by 814
Strategic sustainable development — selection, design and synergies of applied tools
Robèrt, K.-H., Schmidt-Bleek, B., Aloisi de Larderel, J., Basile, G., Jansen, J. L., Kuehr, R., Price Thomas, P., Suzuki, M., Hawken, P., & Wackernagel, M. (2002) · Journal of Cleaner Production · doi:10.1016/s0959-6526(01)00061-0 · Cited by 811
A characterisation of logistics networks for product recovery
Fleischmann, M., Krikke, H. R., Dekker, R., & Flapper, S. D. P. (2000) · Omega · doi:10.1016/s0305-0483(00)00022-0 · Cited by 786
Manzini, E., & Vezzoli, C. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00153-1 · Cited by 764
MANAGING PRODUCT RETURNS FOR REMANUFACTURING
GUIDE, V. D. R., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00075.x · Cited by 708
Choosing the Right Green Marketing Strategy
Ginsberg, J. M., & Bloom, P. N. (2004) · Dialnet (Universidad de la Rioja) · Cited by 664
Luttropp, C., & Lagerstedt, J. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2005.11.022 · Cited by 610
Operational methods for minimization of energy consumption of manufacturing equipment
Mouzon, G., Yildirim, M. B., & Twomey, J. (2007) · International Journal of Production Research · doi:10.1080/00207540701450013 · Cited by 597
Linking global and local scales: designing dynamic assessment and management processes
Cash, D. (2000) · Global Environmental Change · doi:10.1016/s0959-3780(00)00017-0 · Cited by 596
The IPAT Equation and Its Variants
Chertow, M. R. (2000) · Journal of Industrial Ecology · doi:10.1162/10881980052541927 · Cited by 591
Integrating environmental management and supply chain strategies
Handfield, R., Sroufe, R., & Walton, S. (2005) · Business Strategy and the Environment · doi:10.1002/bse.422 · Cited by 545
COMPETITION IN REMANUFACTURING
MAJUMDER, P., & GROENEVELT, H. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00074.x · Cited by 535
Matching Demand and Supply to Maximize Profits from Remanufacturing
Guide, V. D. R., Teunter, R. H., & Van Wassenhove, L. N. (2003) · Manufacturing & Service Operations Management · doi:10.1287/msom.5.4.303.24883 · Cited by 525
An integrated logistics operational model for green-supply chain management
Sheu, J.-B., Chou, Y.-H., & Hu, C.-C. (2005) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2004.07.001 · Cited by 513
Life cycle assessment and its application to process selection, design and optimisation
Azapagic, A. (1999) · Chemical Engineering Journal · doi:10.1016/s1385-8947(99)00042-x · Cited by 490
Survey of approaches to improve reliability in lca
Björklund, A. E. (2002) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978849 · Cited by 487
Competition in remanufacturing and the effects of government subsidies
Mitra, S., & Webster, S. T. (2007) · International Journal of Production Economics · doi:10.1016/j.ijpe.2007.02.042 · Cited by 467
Designing and evaluating sustainable logistics networks
Frota Neto, J. Q., Bloemhof-Ruwaard, J. M., van Nunen, J. A. E. E., & van Heck, E. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.10.014 · Cited by 451
Environmentally benign manufacturing: Observations from Japan, Europe and the United States
Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D., & Wolff, E. (2005) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2003.10.004 · Cited by 436
Self-citationChan, J. W. K., & Tong, T. K. L. (2007) · Materials & Design · doi:10.1016/j.matdes.2006.02.016 · Cited by 404
From Life Cycle Assessment to Sustainable Production: Status and Perspectives
Hauschild, M., Jeswiet, J., & Alting, L. (2005) · CIRP Annals · doi:10.1016/s0007-8506(07)60017-1 · Cited by 403
Concurrent product and closed-loop supply chain design with an application to refrigerators
Krikke, H., Bloemhof-Ruwaard, J., & Van Wassenhove, L. N. (2003) · International Journal of Production Research · doi:10.1080/0020754031000120087 · Cited by 392
Importance of closed-loop supply chain relationships for product remanufacturing
Östlin, J., Sundin, E., & Björkman, M. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2008.02.020 · Cited by 363
The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles
Geyer, R., Van Wassenhove, L. N., & Atasu, A. (2007) · Management Science · doi:10.1287/mnsc.1060.0600 · Cited by 351
Environmental management and its impact on the operations function
Gupta, M. C. (1995) · International Journal of Operations & Production Management · doi:10.1108/01443579510094071 · Cited by 346
A tool to implement sustainable end-of-life strategies in the product development phase
Gehin, A., Zwolinski, P., & Brissaud, D. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2007.02.012 · Cited by 314
Success factors for integration of ecodesign in product development: A review of state of the art
Johansson, G. (2002) · Environmental Management and Health · doi:10.1108/09566160210417868 · Cited by 282
Methods and techniques to help quality function deployment (QFD)
Bouchereau, V., & Rowlands, H. (2000) · Benchmarking An International Journal · doi:10.1108/14635770010314891 · Cited by 258
Product and Process Design for Successful Remanufacturing
Sundin, E. (2004) · DiVA (Linkoping University) · Cited by 253
Product service systems in the automobile industry: contribution to system innovation?
Williams, A. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.05.034 · Cited by 253
Jayaraman, V. (2006) · International Journal of Production Research · doi:10.1080/00207540500250507 · Cited by 241
Applying Quality Function Deployment to environmentally conscious design
Masui, K., Sakao, T., Kobayashi, M., & Inaba, A. (2003) · International Journal of Quality & Reliability Management · doi:10.1108/02656710310453836 · Cited by 239
Competitive advantage through take-back of used products
Heese, H. S., Cattani, K., Ferrer, G., Gilland, W., & Roth, A. V. (2005) · European Journal of Operational Research · doi:10.1016/j.ejor.2003.11.008 · Cited by 236
Ecodesign tools for designers: defining the requirements
Lofthouse, V. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2005.11.013 · Cited by 229
Westkämper, E., Alting, & Arndt (2000) · CIRP Annals · doi:10.1016/s0007-8506(07)63453-2 · Cited by 226
Product modularization for life cycle engineering
Gu, P., & Sosale, S. (1999) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(99)00049-6 · Cited by 225
Life cycle management and assessment: Approaches and visions towards sustainable manufacturing
Westkämper, E., Alting, L., & Arndt, G. (2001) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/0954405011518557 · Cited by 223
Designing sustainable recovery network of end-of-life products using genetic algorithm
Dehghanian, F., & Mansour, S. (2009) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.04.007 · Cited by 220
Closed‐Loop Supply Chains: An Introduction to the Feature Issue (Part 1)
Guide, V. D. R., & VanWassenhove, L. N. (2006) · Production and Operations Management · doi:10.1111/j.1937-5956.2006.tb00249.x · Cited by 213
On a medium term product recovery and disposal strategy for durable assembly products
Krikke, H. R., van Harten, A., & Schuur, P. C. (1998) · International Journal of Production Research · doi:10.1080/002075498193967 · Cited by 208
A model for supply chains environmental performance analysis and decision making
Tsoulfas, G. T., & Pappis, C. P. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.018 · Cited by 204
An approach for estimating the end-of-life product disassembly effort and cost
Das, S. K., Yedlarajiah, P., & Narendra, R. (2000) · International Journal of Production Research · doi:10.1080/002075400189356 · Cited by 202
MATERIAL PLANNING FOR A REMANUFACTURING FACILITY
FERRER, G., & WHYBARK, D. C. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00073.x · Cited by 189
A concept exploration method for product family design
Simpson, T. W. (1998) · Cited by 186
Remanufacturing of mobile phones—capacity, program and facility adaptation planning
Franke, C., Basdere, B., Ciupek, M., & Seliger, S. (2006) · Omega · doi:10.1016/j.omega.2005.01.016 · Cited by 176
Sodhi, M. S., & Reimer, B. (2001) · OR Spektrum · doi:10.1007/pl00013347 · Cited by 175
Third-party demanufacturing as a solution for extended producer responsibility
Spicer, A. J., & Johnson, M. R. (2004) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00182-8 · Cited by 173
Design for product retirement and material life-cycle
Ishii, K., Eubanks, C. F., & Di Marco, P. (1994) · Materials & Design · doi:10.1016/0261-3069(94)90007-8 · Cited by 170
Systematic integration of design-for-recycling into product design
Kriwet, A., Zussman, E., & Seliger, G. (1995) · International Journal of Production Economics · doi:10.1016/0925-5273(95)99062-a · Cited by 167
Integration of Sustainability Into Early Design Through the Function Impact Matrix
Devanathan, S., Ramanujan, D., Bernstein, W. Z., Zhao, F., & Ramani, K. (2010) · Journal of Mechanical Design · doi:10.1115/1.4001890 · Cited by 167
Self-citationDetermination of a disassembly strategy
Penev, K. D., & de Ron, A. J. (1996) · International Journal of Production Research · doi:10.1080/00207549608904915 · Cited by 166
Incorporating component reuse, remanufacture, and recycle into product portfolio design
Mangun, D., & Thurston, D. L. (2002) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2002.807292 · Cited by 166
Self-citationBouman, M. N., Heijungs, R., van der Voet, E., van den Bergh, J. C. J. M., & Huppes, G. (2000) · Ecological Economics · doi:10.1016/s0921-8009(99)00091-9 · Cited by 166
Product, process, and organizational design for remanufacture – an overview of research
Bras, B., & McIntosh, M. W. (1999) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(99)00021-6 · Cited by 165
A Methodology for Integrating Sustainability Considerations into Process Design
Azapagic, A., Millington, A., & Collett, A. N. (2006) · Process Safety and Environmental Protection · doi:10.1205/cherd05007 · Cited by 164
Life cycle iNdeX (LInX): a new indexing procedure for process and product design and decision-making
Khan, F. I., Sadiq, R., & Veitch, B. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00194-4 · Cited by 161
Integrated life-cycle and risk assessment for industrial processes
Sonnemann, G., Castells, F., Schuhmacher, M., & Hauschild, M. Z. (2004) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02994195 · Cited by 158
Disassembly of multiple product structures
Taleb, K. N., & Gupta, S. M. (1997) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(97)00023-5 · Cited by 158
Virtual Design and Optimization of Machine Tool Spindles
Altıntaş, Y., & Cao, Y. (2005) · CIRP Annals · doi:10.1016/s0007-8506(07)60127-9 · Cited by 151
Achieving agility in supply chain through simultaneous “design of” and “design for” supply chain
Sharifi, H., Ismail, H. S., & Reid, I. R. (2006) · Journal of Manufacturing Technology Management · doi:10.1108/17410380610707393 · Cited by 151
Giudice, F., Rosa, G. L., & Risitano, G. (2004) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2004.04.006 · Cited by 150
White, C. D., Masanet, E. R., Rosen, C. M., & Beckman, S. L. (2003) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00066-5 · Cited by 140
Demand and Dematerialization Impacts of Second‐Hand Markets
Thomas, V. M. (2003) · Journal of Industrial Ecology · doi:10.1162/108819803322564352 · Cited by 139
Product Modularization for Parts Reuse in Inverse Manufacturing
Kimura, F., Satoru, K. A. T. O., Hata, T., & Masuda, T. (2001) · CIRP Annals · doi:10.1016/s0007-8506(07)62078-2 · Cited by 133
An environmental life cycle optimization model for the European pulp and paper industry
Bloemhof‐Ruwaard, J. M., Wassenhove, L. N. V., Gabel, H. L., & Weaver, P. (1996) · Omega · doi:10.1016/s0305-0483(96)00026-6 · Cited by 132
Evaluation of connection types in design for disassembly (DFD) using analytic network process
Güngör, A. (2006) · Computers & Industrial Engineering · doi:10.1016/j.cie.2005.12.002 · Cited by 117
Product modularity for life cycle design
Umeda, Y., Fukushige, S., Tonoike, K., et al. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.115 · Cited by 114
Product classification to support approximate life-cycle assessment of design concepts
Sousa, I., & Wallace, D. R. (2005) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2004.03.007 · Cited by 113
Design for adaptability (DFAD)—a new concept for achieving sustainable design
Kasarda, M. E. F., Terpenny, J. P., Inman, D., Precoda, K., Jelesko, J. G., Şahin, A., & Park, J. (2007) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2007.02.004 · Cited by 97
Modelling of the life cycle of products with data acquisition features
Simon, M., Bee, G., Moore, P., Pu, J., & Xie, C. (2001) · Computers in Industry · doi:10.1016/s0166-3615(01)00088-4 · Cited by 95
Multicriteria decision-aid approach for product end-of-life alternative selection
Bufardi, A., Gheorghe, R., Kiritsis, D., & Xirouchakis, P. C. (2004) · International Journal of Production Research · doi:10.1080/00207540410001699192 · Cited by 87
Park, J.-H., & Seo, K.-K. (2006) · Advanced Engineering Informatics · doi:10.1016/j.aei.2005.09.003 · Cited by 75
Greening products: a framework for product chain management
Boons, F. (2002) · Journal of Cleaner Production · doi:10.1016/s0959-6526(02)00017-3 · Cited by 72
Feature based process planning in environmentally conscious machining – Part 2: macroplanning
Srinivasan, M., & Sheng, P. (1999) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(99)00018-6 · Cited by 67
An evaluation model of product upgradeability for remanufacture
Xing, K., Belusko, M., Luong, L. H. S., & Abhary, K. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0698-9 · Cited by 66
Integrated production machines and systems – beyond lean manufacturing
Pham, D. T., Pham, P. T. N., & Thomas, A. J. (2008) · Journal of Manufacturing Technology Management · doi:10.1108/17410380810888094 · Cited by 65
Designing for Material Separation: Lessons From Automotive Recycling
Coulter, S., Bras, B., Winslow, G., & Yester, S. G. (1998) · Journal of Mechanical Design · doi:10.1115/1.2829179 · Cited by 63
King, A. M., & Burgess, S. C. (2005) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440505x32526 · Cited by 61
Handbook of Mechanical Engineering
Srinivas, J. (2004) · Cited by 61
Reverse Fishbone Diagram: A Tool in Aid of Design for Product Retirement
Ishii, K., & Lee, B. H. (1996) · doi:10.1115/96-detc/dfm-1272 · Cited by 54
Design for Disassembly With High-Stiffness Heat-Reversible Locator-Snap Systems
Shalaby, M., & Saitou, K. (2008) · Journal of Mechanical Design · doi:10.1115/1.2991134 · Cited by 50
Economic and environmental characteristics of global cellular telephone remanufacturing
Skerlos, S. J., Morrow, W. R., Chan, K., Zhao, F., Hula, A., Seliger, G., Başdere, B., & Prasitnarit, A. (2003) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.2003.1208055 · Cited by 44
Self-citationModularization as an enabler for cycle economy
Seliger, G., & Zettl, M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.031 · Cited by 43
Kwak, M., & Kim, H. (2010) · Journal of Mechanical Design · doi:10.1115/1.4001411 · Cited by 42
Self-citationSelection of materials to reduce environmental impact: a case study on refrigerator insulation
Weaver, P. M., Ashby, M. F., Burgess, S. C., et al. (1996) · Materials & Design (1980-2015) · doi:10.1016/0261-3069(96)00024-6 · Cited by 41
Internet‐Based Integrated Environmental Assessment Using Ontologies to Share Computational Models
Kraines, S. B., Batres, R., Koyama, M., et al. (2005) · Journal of Industrial Ecology · doi:10.1162/1088198054821690 · Cited by 40
FEAsy: A Sketch-Based Interface Integrating Structural Analysis in Early Design
Murugappan, S., & Ramani, K. (2009) · doi:10.1115/detc2009-87727 · Cited by 32
Self-citationA Hierarchical Decision Model for Re-manufacturing and Re-use
Guide, V. D. R., & Pentico, D. W. (2003) · International Journal of Logistics Research and Applications · doi:10.1080/1367556031000063040 · Cited by 31
Analyzing supply chain robustness for OEMs from a life cycle perspective using life cycle simulation
Komoto, H., Tomiyama, T., Silvester, S., & Brezet, H. C. (2009) · International Journal of Production Economics · doi:10.1016/j.ijpe.2009.11.017 · Cited by 29
Design for environment: an environmental analysis model for the modular design of products
Qian, X., & Zhang, H. (2003) · Proceedings of the ... IEEE International Symposium on Electronics and the Environment · doi:10.1109/isee.2003.1208058 · Cited by 25
A stochastic framework for embodied greenhouse gas emissions modelling of construction materials
Shipworth, D. (2002) · Building Research & Information · doi:10.1080/09613210110090412 · Cited by 24
New technologies for active disassembly: using the shape memory effect in engineering polymers
Hussein, H., & Harrison, D. J. (2008) · International Journal of Product Development · doi:10.1504/ijpd.2008.020403 · Cited by 20
Introducing Sustainability Early Into Manufacturing Process Planning
Mani, M., Lyons, K. W., Rachuri, S., Subrahmanian, E., Ameta, G., Sriram, R. D., & Feng, S. C. (2008) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec_icmp2008-72129 · Cited by 14
Seliger, Skerlos, Basdere, et al. (2003) · doi:10.1109/ecodim.2003.1322670 · Cited by 11
Cited by
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Reike, D., Vermeulen, W. J. V., & Witjes, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.027 · Cited by 1,886
A comparative literature analysis of definitions for green and sustainable supply chain management
Ahi, P., & Searcy, C. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.02.018 · Cited by 1,463
The evolution and future of manufacturing: A review
Esmaeilian, B., Behdad, S., & Wang, B. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.03.001 · Cited by 686
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Metadata
- Authors
- Ramani, K., Ramanujan, D., Bernstein, W. Z., Zhao, F., Sutherland, J., Handwerker, C., Choi, J.-K., Kim, H., & Thurston, D.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2010-09-01
- Volume
- 132
- Issue
- 9
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W1990813015
- Cited by
- 469
- References
- 109
- FWCI
- 49.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.