The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Two-Phase Microchannel Heat Sinks: Theory, Applications, and Limitations
Abstract
Boiling water in small channels that are formed along turbine blades has been examined since the 1970s as a means to dissipating large amounts of heat. Later, similar geometries could be found in cooling systems for computers, fusion reactors, rocket nozzles, avionics, hybrid vehicle power electronics, and space systems. This paper addresses (a) the implementation of two-phase microchannel heat sinks in these applications, (b) the fluid physics and limitations of boiling in small passages, and effective tools for predicting the thermal performance of heat sinks, and (c) means to enhance this performance. It is shown that despite many hundreds of publications attempting to predict the performance of two-phase microchannel heat sinks, there are only a handful of predictive tools that can tackle broad ranges of geometrical and operating parameters or different fluids. Development of these tools is complicated by a lack of reliable databases and the drastic differences in boiling behavior of different fluids in small passages. For example, flow boiling of certain fluids in very small diameter channels may be no different than in macrochannels. Conversely, other fluids may exhibit considerable “confinement” even in seemingly large diameter channels. It is shown that cutting-edge heat transfer enhancement techniques, such as the use of nanofluids and carbon nanotube coatings, with proven merits to single-phase macrosystems, may not offer similar advantages to microchannel heat sinks. Better performance may be achieved by careful optimization of the heat sink’s geometrical parameters and by adapting a new class of hybrid cooling schemes that combine the benefits of microchannel flow with those of jet impingement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of heat and mass transfer
Hewitt, G. F. (2008) · Begellhouse eBooks · Cited by 12,932
Fundamentals of heat and mass transfer
Larkin, A. V. (2018) · BSU Digital Library (Belarusian State University) · Cited by 8,034
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
One Dimensional Two-Phase Flow
Wallis, G. B. (1969) · CERN Document Server (European Organization for Nuclear Research) · Cited by 4,893
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378 · cited 1×
“[155] showed that MWCNTs possess thermal conductivities in excess of 3000 W/m K at room temperature, which explains the recent strong interest in implementing CNTs in cooling applications.”
Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles
Lee, S., Choi, S. U.-S., Li, S., & Eastman, J. A. (1999) · Journal of Heat Transfer · doi:10.1115/1.2825978 · Cited by 3,066
A model for predicting flow regime transitions in horizontal and near horizontal gas‐liquid flow
Taitel, Y., & Dukler, A. E. (1976) · AIChE Journal · doi:10.1002/aic.690220105 · Cited by 2,915
Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes
Lockhart, R. W. (1949) · Chemical engineering progress · Cited by 2,727
95/03868 Convective boiling and condensation
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)95486-o · Cited by 2,445
Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow
Chen, J. C. (1966) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260019a023 · Cited by 1,990
A flow pattern map for gas—liquid flow in horizontal pipes
Mandhane, J. M., Gregory, G. A., & Aziz, K. (1974) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(74)90006-8 · Cited by 1,335
A general correlation for flow boiling in tubes and annuli
Gungor, K. E., & Winterton, R. H. S. (1986) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(86)90205-x · Cited by 1,275
Kandlikar, S. G. (1990) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.2910348 · Cited by 1,191
(1978) · Cited by 1,056
Qu, W., & Mudawar, I. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00337-4 · Cited by 1,033
Self-citationSome characteristics of air-water two-phase flow in small diameter vertical tubes
Mishima, K., & Hibiki, T. (1996) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(96)00010-9 · Cited by 995
Liu, Z., & Winterton, R. H. S. (1991) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(91)90234-6 · Cited by 966
Assessment of high-heat-flux thermal management schemes
Mudawar, I. (2001) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/6144.926375 · Cited by 939
Self-citationZivi, S. M. (1964) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3687113 · Cited by 915
Convective Boiling and Condensation
Collie, J. G., Eng, F. R. S. F., John, R., & Phil, T. D. (1994) · doi:10.1093/oso/9780198562825.001.0001 · Cited by 720
Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113
Lazarek, G. M., & Black, S. H. (1982) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(82)90070-9 · Cited by 715
Flow characteristics of water in microtubes
Mohiuddin Mala, G., & Li, D. (1999) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(98)10043-7 · Cited by 706
Small circular- and rectangular-channel boiling with two refrigerants
Tran, T. N., Wambsganss, M. W., & France, D. M. (1996) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(96)00002-x · Cited by 621
Chart correlation for saturated boiling heat transfer: Equations and further study
Shah, M. M. (1982) · ASHRAE winter conference papers · Cited by 604
Recent challenges of hydrogen storage technologies for fuel cell vehicles
Mori, D., & Hirose, K. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.07.115 · Cited by 592
Lee, J., & Mudawar, I. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.09.019 · Cited by 550
Self-citationHigh flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Bowers, M. B., & Mudawar, I. (1994) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(94)90103-1 · Cited by 483
Self-citationThree-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Fedorov, A. G., & Viskanta, R. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00151-9 · Cited by 446
Model for effective thermal conductivity of nanofluids
Xue, Q.-Z. (2003) · Physics Letters A · doi:10.1016/s0375-9601(02)01728-0 · Cited by 440
Characterization of frictional pressure drop for liquid flows through microchannels
Judy, J., Maynes, D., & Webb, B. W. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00076-5 · Cited by 427
Heat transfer and pressure drop in narrow rectangular channels
Warrier, G. R., Dhir, V. K., & Momoda, L. A. (2002) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(02)00107-3 · Cited by 384
FRICTIONAL FLOW CHARACTERISTICS OF WATER FLOWING THROUGH RECTANGULAR MICROCHANNELS
Peng, X. F., Peterson, G. P., & Wang, B. X. (1994) · Experimental Heat Transfer · doi:10.1080/08916159408946484 · Cited by 381
Tran, T. N., Chyu, M.-C., Wambsganss, M. W., & France, D. M. (2000) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(99)00119-6 · Cited by 344
Lee, H. J., & Lee, S. Y. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00054-4 · Cited by 308
Laminar fluid behavior in microchannels using micropolar fluid theory
Papautsky, I., Brazzle, J., Ameel, T., & Frazier, A. B. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(98)00261-1 · Cited by 301
Lee, J., & Mudawar, I. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.09.018 · Cited by 300
Self-citationOne-dimensional two-phase flow
SPALDING, D. B. (1971) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(71)90219-5 · Cited by 298
Effects of carbon nanotube arrays on nucleate pool boiling
Ujereh, S., Fisher, T., & Mudawar, I. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.01.030 · Cited by 289
Self-citationFriction factors in smooth trapezoidal silicon microchannels with different aspect ratios
Wu, H. Y., & Cheng, P. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00106-6 · Cited by 285
Effects of carbon nanotube coating on flow boiling in a micro-channel
Khanikar, V., Mudawar, I., & Fisher, T. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.02.007 · Cited by 235
Self-citationDynamic Long-Term Anticipation of Chaotic States
Voss, H. U. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.1 · Cited by 231
Lee, J., & Mudawar, I. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.02.012 · Cited by 195
Self-citationLee, J., & Mudawar, I. (2009) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2008.2005783 · Cited by 194
Self-citationProceedings of the 1991 ASME JSME thermal engineering joint conference
Lloyd, J. R., & Kurosaki, Y. (1991) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 192
Bubble diameter on detachment in flowing liquids
Al-Hayes, R. A. M., & Winterton, R. H. S. (1981) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(81)90030-2 · Cited by 132
Lee, J., & Mudawar, I. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.02.013 · Cited by 124
Self-citationPumpless Loop for Narrow Channel and Micro-Channel Boiling
Mukherjee, S. F., & Mudawar, I. (2003) · Journal of Electronic Packaging · doi:10.1115/1.1602708 · Cited by 108
Self-citationVisaria, M., Mudawar, I., Pourpoint, T. L., & Kumar, S. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.12.010 · Cited by 85
Self-citationVisaria, M., Mudawar, I., & Pourpoint, T. L. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.09.029 · Cited by 82
Self-citationVLSI Packaging Technique Using Liquid-Cooled Channels
KISHIMOTO, T., & Ohsaki, T. (1986) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/tchmt.1986.1136661 · Cited by 75
Advances in multiphase flow 1995
Whalley, P. B. (1996) · The Chemical Engineering Journal and the Biochemical Engineering Journal · doi:10.1016/s0923-0467(97)80008-5 · Cited by 74
Smart pumpless loop for micro-channel electronic cooling using flat and enhanced surfaces
Mukherjee, S., & Mudawar, I. (2003) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2003.811478 · Cited by 70
Self-citationSung, M. K., & Mudawar, I. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.07.035 · Cited by 57
Self-citationChiaramonte, F. P., & Joshi, J. A. (2013) · NASA Technical Reports Server (NASA) · Cited by 51
Chyu, M.-C., Tran, T., & Wambsganss, M. W. (1999) · University of North Texas Digital Library (University of North Texas) · Cited by 51
Flow boiling: Prediction of bubble departure
Winterton, R. H. S. (1984) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(84)90072-3 · Cited by 30
Smart, low-cost, pumpless loop for micro-channel electronic cooling using flat and enhanced surfaces
Mukherjee, S., & Mudawar, I. (2003) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2002.1012479 · Cited by 25
Self-citationMicroelectromechanical systems (MEMS)
Somà, A., & Pasquale, G. D. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119970 · Cited by 20
Lee, J., & Mudawar, I. (2009) · Journal of Electronic Packaging · doi:10.1115/1.3144146 · Cited by 14
Self-citation
Cited by
He, Z., Yan, Y., & Zhang, Z. (2021) · Energy · doi:10.1016/j.energy.2020.119223 · Cited by 869
Recent Advances in High-Flux, Two-Phase Thermal Management
Mudawar, I. (2013) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4023599 · Cited by 296
Self-citationKim, S.-M., & Mudawar, I. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.05.036 · Cited by 260
Self-citationQasem, N. A. A., & Zubair, S. M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.104 · Cited by 134
Microchannel cooling strategies for high heat flux (1 kW/cm2) power electronic applications
Jung, K. W., Kharangate, C. R., Lee, H., Palko, J., Zhou, F., Asheghi, M., Dede, E. M., & Goodson, K. E. (2017) · 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2017.7992457 · Cited by 39
Metadata
- Authors
- Mudawar, I.
- Venue
- Journal of Electronic Packaging
- Publisher
- ASME International
- Published
- 2011-12-01
- Volume
- 133
- Issue
- 4
- ISSN
- 1043-7398 (ISSN-L)
- 1528-9044
- OpenAlex
- W1975116394
- Cited by
- 347
- References
- 60
- FWCI
- 16.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.