Measurement of Transient Tool-Internal Temperature Fields During Hard Turning by Insert-Embedded Thin Film Sensors
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
This paper presents a novel approach for obtaining thermal data from the close vicinity (70–700 μm) of the tool-workpiece interface while machining hardened steel. Arrays of microthin film C-type thermocouples with a junction size of 5 μm × 5 μm were fabricated by standard microfabrication methods and have been successfully embedded into polycrystalline cubic boron nitride (PCBN) using a diffusion bonding technique. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were performed to examine material interactions at the bonding interface in order to determine optimal bonding parameters. Static and dynamic sensor performances have been characterized. The sensors exhibit excellent linearity up to 1300 °C, fast rise time of 150 ns, and sensitivity of ∼19 μV/ °C. The PCBN inserts instrumented with embedded thin film C-type thermocouples were successfully applied to measure internal tool temperatures as close as 70 μm to the cutting edge while machining hardened steel workpieces at industrially relevant cutting conditions. Correlations between temperature and cutting parameters have been established. The embedded microthin film sensor array provided unprecedented temporal and spatial resolution as well as high accuracy for microscale transient tool-internal temperature field measurements. Tool-internal temperature maps were generated from acquired data. In the frequency domain, obtained thermal data indicated the onset of regenerative machining chatt…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Tool Condition Monitoring (TCM) — The Status of Research and Industrial Application
Byrne, G., Dornfeld, D., Inasaki, I., Ketteler, G., König, W., & Teti, R. (1995) · CIRP Annals · doi:10.1016/s0007-8506(07)60503-4 · Cited by 737
Tönshoff, H. K., Arendt, C., & Amor, R. B. (2000) · CIRP Annals · doi:10.1016/s0007-8506(07)63455-6 · Cited by 519
Machining Process Monitoring and Control: The State-of-the-Art
Liang, S. Y., Hecker, R. L., & Landers, R. G. (2004) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1707035 · Cited by 338
Usui, E., Hirota, A., & Masuko, M. (1978) · Journal of Engineering for Industry · doi:10.1115/1.3439413 · Cited by 192
Monitoring of Ultraprecision Machining Processes
Dornfeld, D. A., Lee, Y., & Chang, A. (2003) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-002-1294-2 · Cited by 100
Zhang, X., Choi, H., Datta, A., & Li, X. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/5/004 · Cited by 94
Self-citationCutting temperatures in hard turning chromium hardfacings with PCBN tooling
Ren, X., Yang, Q. X., James, R. D., & Wang, L. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.10.013 · Cited by 67
Single-step superfinish hard machining: Feasibility and feasible cutting conditions
Liu, C. R., & Mittal, S. (1996) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/0736-5845(95)00029-1 · Cited by 66
Experimental evaluation of MEMS strain sensors embedded in composites
Hautamaki, C., Zürn, S., Mantell, S. C., & Polla, D. L. (1999) · Journal of Microelectromechanical Systems · doi:10.1109/84.788631 · Cited by 56
Cheng, X., Datta, A., Choi, H., Zhang, X., & Li, X. (2006) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2515456 · Cited by 39
Self-citation
Research works printed but not linked: 3
- 2001, Sensors in Manufacturing
- 1995, Fiber Optic Smart Structures
- 1985, Diffusion Bonding of Materials
Cited by
Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review
Che, D., Saxena, I., Han, P., Guo, P., & Ehmann, K. F. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4026526 · Cited by 335
Self-citationManufacturing of advanced smart tooling for metal forming
Cao, J., Brinksmeier, E., Fu, M. W., Gao, R. X., Liang, B., Merklein, M., Schmidt, M., & Yanagimoto, J. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.001 · Cited by 146
Real-time tool wear monitoring using thin-film thermocouple
Li, T., Shi, T., Tang, Z., Liao, G., Duan, J., Han, J., & He, Z. (2020) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.116901 · Cited by 108
Sensor and actuator integrated tooling systems
Bleicher, F., Biermann, D., Drossel, W., Moehring, H.-C., & Altıntaş, Y. (2023) · CIRP Annals · doi:10.1016/j.cirp.2023.05.009 · Cited by 80
Li, T., Shi, T., Tang, Z., Liao, G., Han, J., & Duan, J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.116376 · Cited by 57
Che, D., Han, P., Guo, P. Y., & Ehmann, K. F. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4007468 · Cited by 53
“[44–46] have, for the first time, succeeded to measure the temperature distribution in polycrystalline cubic boron nitride (PCBN) inserts using an array of embedded microthin-film thermocouples only about 70 lm from the cutting edge under the tool’s rake face in hard turning operation.”
BackgroundSelf-citationDynamic Calibration of a Coaxial Thermocouples for Short Duration Transient Measurements
Kumar, R., & Sahoo, N. (2013) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4024593 · Cited by 49
Li, J., Tao, B., Huang, S., & Yin, Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.07.017 · Cited by 49
Zhao, J., Liu, Z., Wang, B., Hua, Y., & Wang, Q. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.07.142 · Cited by 47
Manjhi, S. K., & Kumar, R. (2018) · Measurement · doi:10.1016/j.measurement.2018.12.070 · Cited by 35
Han, J., Liu, Z., Cao, K., Xu, L., Shi, T., & Liao, G. (2022) · Measurement · doi:10.1016/j.measurement.2022.111413 · Cited by 31
Lee, K.-M., Huang, Y., Ji, J., & Lin, C.-Y. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2018.2826362 · Cited by 28
“(TFTCs) [8], [9] that take advantages of MEMS technology,”
BackgroundManjhi, S. K., & Kumar, R. (2020) · Measurement · doi:10.1016/j.measurement.2020.108221 · Cited by 26
Temperature measurement in friction element welding process with micro thin film thermocouples
Absar, S., Ruszkiewicz, B. J., Skovron, J. D., Mears, L., Abke, T., Zhao, X., & Choi, H. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.057 · Cited by 24
Li, L., Li, B., Li, X., & Ehmann, K. F. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4023722 · Cited by 20
Self-citationHuang, S., Tao, B., Li, J., Fan, Y., & Yin, Z. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1987-9 · Cited by 19
Systems for locally resolved measurements of physical loads in manufacturing processes
Tausendfreund, A., Stöbener, D., Dumstorff, G., Sarma, M., Heinzel, C., Lang, W., & Goch, G. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.03.005 · Cited by 18
Kesriklioglu, S., Arthur, C., Morrow, J. D., & Pfefferkorn, F. E. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4044035 · Cited by 18
Plogmeyer, M., González, G., Pongratz, C., Schott, A., Schulze, V. K., & Bräuer, G. (2024) · Production Engineering · doi:10.1007/s11740-023-01251-1 · Cited by 15
“These methods primarily rely on the thermoelectric effect [12] and the thermoresistive effect [13].”
Ji, J., Huang, Y., & Lee, K.-M. (2017) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2731803 · Cited by 15
Wang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Zhu, J., & Tao, B. (2020) · IEEE Access · doi:10.1109/access.2020.3019695 · Cited by 11
Data acquisition system based on 8051 microcontroller for cutting tool temperature measurement
Arunaganesan, S., Adhavan, J., Reddy, G. S., & Venkatesan, M. (2013) · IEEE International Conference on Computational Intelligence and Computing Research (ICCIC) · doi:10.1109/iccic.2013.6724154 · Cited by 10
“Weck et al. [4] analysed the thermal stress in tools and its deformation and concluded with various steps to reduce thermal drift in tools due to their heating.”
BackgroundJi, J., Huang, Y., & Lee, K.-M. (2016) · IEEE International Conference on Advanced Intelligent Mechatronics (AIM) · doi:10.1109/aim.2016.7576944 · Cited by 10
“Built upon traditional thermocouple (TC) methods and the recent advances of MEMS technology, thin-film thermocouples (TFTCs) have been developed [5] [6] as new micro-scale (-scale) sensors that can be integrated in cutting tool for its temperature measurement.”
MethodOptimal fabrication of a thin-film thermocouple (TFTC) using Alumel/chromel junctions
Kim, D. M., Kwak, H. J., Shin, D. Y., Park, J. H., & Kim, J. Y. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e26128 · Cited by 9
“Werschmoeller et al. [12 – 14] attempted fabrication of a micro-arrayed TFTC sensor on a polycrystalline cubic boron nitride (PCBN) cutting tool.”
MethodManjhi, S. K., & Kumar, R. (2020) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4048664 · Cited by 9
An Investigation of Workpiece Temperature in Orthogonal Turn-Milling Compound Machining
Peng, F., Liu, Y., Lin, S., Yan, R., Yang, S., & Li, B. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028234 · Cited by 9
Manjhi, S. K., & Kumar, R. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11341-4 · Cited by 5
Ji, J., Lee, K.-M., Lin, C.-Y., & Huang, Y. (2015) · IEEE International Conference on Advanced Intelligent Mechatronics (AIM) · doi:10.1109/aim.2015.7222655 · Cited by 4
“1mm) were embedded by means of diffusion bonding in the base material of a polycrystalline-cubic-boron-nitride blade; and in [7] transient temperature measurements using arrays of thin-film C-type TCs (with junction size of 5m5m) were performed in the close (70–700m) vicinity of the tool-workpiece interface with…”
MethodNayak, S., Sahoo, N., & Komiyama, M. (2025) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2025.110178 · Cited by 4
3D parametric thermal finite element model in turning
Tarhouni, W., Abdellaoui, L., Khlifi, H., Said, M. B., Mabrouki, T., & Bouzid, W. (2023) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-023-04301-y · Cited by 2
“For that, many experimental methods have been introduced to measure directly the tool temperature, such as the tool-work thermocouple [8], thin film sensors [9], embedded thermocouple [10], infrared imaging [11] and thermocouple with infrared pyrometer [12].”
MethodFeng, K., Zhang, F., Wang, W., Wu, Z., & Ma, J. (2022) · Journal of Nanoelectronics and Optoelectronics · doi:10.1166/jno.2022.3268
Metadata
- Authors
- Werschmoeller, D., Li, X., & Ehmann, K.
- Affiliations
- University of Wisconsin–Madison (US)
- Northwestern University (US)
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2012-11-01
- Volume
- 134
- Issue
- 6
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W4239682791
- Cited by
- 32
- References
- 18
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 3 · 2022: 3 · 2020: 4 · 2019: 3 · 2018: 6 · 2017: 1 · 2016: 1 · 2015: 2 · 2014: 2 · 2013: 3 · 2012: 1
- FWCI
- 3.91
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Manufacturing Science and Engineering (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Physics and Astronomy › Instrumentation › Advanced Sensor Technologies Research
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Keywords
- hard turning, diffusion bonding, hardened steel machining, chatter, cutting edge temperature
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.