The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Optimal Design for Additive Manufacturing: Opportunities and Challenges
Abstract
Additive Manufacturing (AM) represents a maturing collection of production technologies also known as rapid prototyping, rapid manufacturing and three-dimensional printing. One of the most promising aspects of AM is the possibility to create highly complex geometries. Despite a growing body of knowledge concerning the technological challenges, there is a lack of methods that allow designers to effectively deal with the new possibilities. This article presents a literature survey on the impact that AM can have on design. The survey was focused on the new opportunities of fabrication processes, the relationship between structure and performance, and optimization approaches. We applied Olsen’s three-link chain model to relate product structure with performance, linked by strength, stiffness, compliance, dynamic, thermal, and visual properties. We also use this model to base our proposed Design for Additive Manufacturing (DfAM) method. The findings show that there is a growing body of knowledge in the field of design for AM (DfAM), yet only considers a subset of properties. Furthermore, the knowledge on materials, computational optimization, computer aided design, and behavioral simulation embody separated domains and related software support. This is in contrast with design engineering, which requires a holistic approach to conceptualize new products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The long tail: why the future of business is selling less of more
(2007) · Choice Reviews Online · doi:10.5860/choice.44-2783 · Cited by 2,869
Cited by
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Costs and Cost Effectiveness of Additive Manufacturing
Thomas, D. S., & Gilbert, S. W. (2014) · doi:10.6028/nist.sp.1176 · Cited by 443
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
3D-printed upper limb prostheses: a review
ten Kate, J., Smit, G., & Breedveld, P. (2017) · Disability and Rehabilitation: Assistive Technology · doi:10.1080/17483107.2016.1253117 · Cited by 374
Metadata
- Authors
- Doubrovski, Z., Verlinden, J. C., & Geraedts, J. M. P.
- Venue
- Volume 9: 23rd International Conference on Design Theory and Methodology; 16th Design for Manufacturing and the Life Cycle Conference
- Publisher
- ASMEDC
- Published
- 2011-01-01
- Pages
- 635-646
- OpenAlex
- W2063784058
- Cited by
- 166
- References
- 1
- FWCI
- 3.02
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimal Design for Additive Manufacturing: Opportunities and Challenges. https://app.cochat.ai/papers/10.1115/detc2011-48131
- The paper
- Doubrovski, Z., Verlinden, J. C., & Geraedts, J. M. P. (2011). Optimal Design for Additive Manufacturing: Opportunities and Challenges. Volume 9: 23rd International Conference on Design Theory and Methodology; 16th Design for Manufacturing and the Life Cycle Conference. https://doi.org/10.1115/detc2011-48131
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.