3D jet printer of edible gels for food creation
The DOI matches its Crossref record.
Abstract
In recent years, aging is progressing in Japan. Elderly people can't swallow the food well. So, the need of soft food is increasing greatly with the aging of the population. There are so few satisfying foods for the elderly to enjoy a meal. An equipment of printing soft food gives the elderly a big dream and is promising. In this study, we aim at developing a 3D edible gel printer in order to make soft food for the elderly. We made a prototype of the 3D edible gel printer. The printer consists of syringe pump and dispenser. The syringe pump extrudes the solution. The dispenser allows to model threedimensional objects. We use agar solution as the ink to carry out the printing. Agar’s gelation deeply depends on temperature. Therefore temperature control of the solution is important to mold optimal shapes because the physical crosslinking network of agar’s solution is instable. We succeeded in making the gels and plate-shape gel using the 3D edible gel printer. Further more, in order to increase the gelation speed agar’s solution, we changed the dispenser and the printing test is being done now. 4 kinds of soft food prepared from agar and gelatin were printed by the 3D edible gel printer. The compression tests of the printed soft food samples were done and their hardness is measured because the hardness is one of very important factors which influence the food texture greatly. In the future, the viscosity of the agar solution or other food ink should be adjusted to suitable for printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
3d printing technologies applied for food design: Status and prospects
Godoi, F. C., Prakash, S., & Bhandari, B. R. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2016.01.025 · Cited by 939
An Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
3D printing technology: The new era for food customization and elaboration
Dankar, I., Haddarah, A., Omar, F. E. L., Sepulcre, F., & Pujolà, M. (2018) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2018.03.018 · Cited by 471
Extrusion-based food printing for digitalized food design and nutrition control
Sun, J., Zhou, W., Yan, L., Huang, D., & Lin, L.-Y. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.02.028 · Cited by 410
Applications of 3D Printing in Food Processing
Nachal, N., Moses, J. A., Karthik, P., & Anandharamakrishnan, C. (2019) · Food Engineering Reviews · doi:10.1007/s12393-019-09199-8 · Cited by 359
Metadata
- Authors
- Serizawa, R., Shitara, M., Gong, J., Makino, M., Kabir, M. H., & Furukawa, H.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2014-03-09
- Volume
- 9058
- Pages
- 90580A
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2044790220
- Cited by
- 46
- References
- 0
- FWCI
- 3.01
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D jet printer of edible gels for food creation. https://app.cochat.ai/papers/10.1117/12.2045082
- The paper
- Serizawa, R., Shitara, M., Gong, J., Makino, M., Kabir, M. H., & Furukawa, H. (2014). 3D jet printer of edible gels for food creation. SPIE Proceedings. https://doi.org/10.1117/12.2045082
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.