The DOI matches its Crossref record.
Low-cost piezocomposite actuator for structural control applications:
Abstract
The design, manufacture, and testing of a low-cost, flexible, planar composite piezoceramic actuator device will be presented. The actuator uses interdigitated electrodes for poling and subsequent actuation of an internal layer of machined piezoceramic fibers. The fiber sheets are formed from monolithic piezoceramic wafers and conventional computer controlled wafer-dicing methods. The fabrication and use of fiber sheets allows precise handing and alignment of piezoceramic fibers during subsequent phases of actuator assembly. Test show that the actuator is capable of producing large, directional in-plane strains; on order of 2000 parts-per-million under a 4000 V peak-to-peak applied voltage cycle. Preliminary endurance testing indicates that the device is relatively durable, with no reductions in free-strain performance up to 90 million electrical cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
“The MFC structure was developed by NASA [73] and consists of thin PZT fibres embedded in a Kapton film and connected with an interdigitated electrode (IDE) pattern shown in figure 12.”
MethodA review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Research in this area has led to a broad range of active piezoelectric devices utilizing both fibers (Active Fiber Composites (AFC) [103] and Macro-Fiber Composites (MFC) [104]) and particles (0–3 composites).”
BackgroundInfluentialComparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05056681 · Cited by 663
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00081-5 · Cited by 363
A Review of Acoustic Impedance Matching Techniques for Piezoelectric Sensors and Transducers
Rathod, V. T. (2020) · Sensors · doi:10.3390/s20144051 · Cited by 328
Park, G., Farrar, C. R., Scalea, F. L. D., & Coccia, S. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/020 · Cited by 264
Temperature effects in ultrasonic Lamb wave structural health monitoring systems
Lanza di Scalea, F., & Salamone, S. (2008) · The Journal of the Acoustical Society of America · doi:10.1121/1.2932071 · Cited by 203
Metadata
- Authors
- Wilkie, W. K., Bryant, R. G., High, J. W., Fox, R. L., Hellbaum, R. F., Jalink, Jr., Little, B. D., & Mirick, P. H.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2000-06-12
- Volume
- 3991
- Pages
- 323-334
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W1991681441
- Cited by
- 469
- References
- 0
- FWCI
- 60.77
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.