The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
A Simple Method for Measuring Stiffness during Running
Abstract
The spring-mass model, representing a runner as a point mass supported by a single linear leg spring, has been a widely used concept in studies on running and bouncing mechanics. However, the measurement of leg and vertical stiffness has previously required force platforms and high-speed kinematic measurement systems that are costly and difficult to handle in field conditions. We propose a new “sine-wave” method for measuring stiffness during running. Based on the modeling of the force-time curve by a sine function, this method allows leg and vertical stiffness to be estimated from just a few simple mechanical parameters: body mass, forward velocity, leg length, flight time, and contact time. We compared this method to force-platform-derived stiffness measurements for treadmill dynamometer and overground running conditions, at velocities ranging from 3.33 m·s–1 to maximal running velocity in both recreational and highly trained runners. Stiffness values calculated with the proposed method ranged from 0.67% to 6.93% less than the force platform method, and thus were judged to be acceptable. Furthermore, significant linear regressions (p< 0.01) close to the identity line were obtained between force platform and sine-wave model values of stiffness. Given the limits inherent in the use of the spring-mass model, it was concluded that this sine-wave method allows leg and stiffness estimates in running on the basis of a few mechanical parameters, and could be useful in further field measurements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The American Journal of Physiology
(1899) · The American Naturalist · doi:10.1086/277182 · Cited by 5,654
The spring-mass model for running and hopping
Blickhan, R. (1989) · Journal of Biomechanics · doi:10.1016/0021-9290(89)90224-8 · Cited by 1,673
The mechanics of running: How does stiffness couple with speed?
McMahon, T. A., & Cheng, G. C. (1990) · Journal of Biomechanics · doi:10.1016/0021-9290(90)90042-2 · Cited by 1,121
The biomechanics of human movement
(1991) · Applied Ergonomics · doi:10.1016/0003-6870(91)90404-6 · Cited by 739
Leg stiffness and stride frequency in human running
Farley, C. T., & González, O. (1996) · Journal of Biomechanics · doi:10.1016/0021-9290(95)00029-1 · Cited by 737
Ground reaction forces at different speeds of human walking and running
NILSSON, J., & THORSTENSSON, A. (1989) · Acta Physiologica Scandinavica · doi:10.1111/j.1748-1716.1989.tb08655.x · Cited by 697
Cavagna, G. A., Saibene, F. P., & Margaria, R. (1964) · Journal of Applied Physiology · doi:10.1152/jappl.1964.19.2.249 · Cited by 625
Cavagna, G. A. (1975) · Journal of Applied Physiology · doi:10.1152/jappl.1975.39.1.174 · Cited by 624
Running in the real world: adjusting leg stiffness for different surfaces
Ferris, D. P., Louie, M., & Farley, C. T. (1998) · Proceedings of the Royal Society of London. Series B: Biological Sciences · doi:10.1098/rspb.1998.0388 · Cited by 594
Joint stiffness: Myth or reality?
Latash, M. L., & Zatsiorsky, V. M. (1993) · Human Movement Science · doi:10.1016/0167-9457(93)90010-m · Cited by 522
Cited by
Hunter, I., & Smith, G. A. (2007) · European Journal of Applied Physiology · doi:10.1007/s00421-007-0456-1 · Cited by 272
Validity of the Stryd power meter in measuring running parameters at submaximal speeds
Imbach, F., Candau, R., Chailan, R., & Perrey, S. (2020) · Sports · doi:10.3390/sports8070103 · Cited by 72
Liu, B., Wu, J., Shi, Q., Hao, F., Xiao, W., Yu, J., Yu, F., & Ren, Z. (2022) · Frontiers in Physiology · doi:10.3389/fphys.2022.1059221 · Cited by 27
Metadata
- Authors
- Morin, J.-B., Dalleau, G., Kyröläinen, H., Jeannin, T., & Belli, A.
- Venue
- Journal of Applied Biomechanics
- Publisher
- Human Kinetics
- Published
- 2005-05
- Volume
- 21
- Issue
- 2
- Pages
- 167-180
- ISSN
- 1065-8483 (ISSN-L)
- 1543-2688
- OpenAlex
- W151173606
- Cited by
- 376
- References
- 25
- FWCI
- 1.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Simple Method for Measuring Stiffness during Running. https://app.cochat.ai/papers/10.1123/jab.21.2.167
- The paper
- Morin, J.-B., Dalleau, G., Kyröläinen, H., Jeannin, T., & Belli, A. (2005). A Simple Method for Measuring Stiffness during Running. Journal of Applied Biomechanics. https://doi.org/10.1123/jab.21.2.167
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.