Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
A generalizable strategy enables the expansion of the bioink palette and bioprinting capabilities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [26]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443 · cited 1×
“, spreading, migration, and proliferation) (5, 6) and present an environmental stiffness that is incompatible with cells of soft-tissue origin.”
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
Self-citation25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 2×
“This paradox has resulted in a compressed “biofabrication window” containing a select group of feasible bioinks, with other biomaterial systems requiring major compromises in either printability or biocompatibility ( 7 , 8 ).”
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Khetan, S., Guvendiren, M., Legant, W. R., Cohen, D. M., Chen, C. S., & Burdick, J. A. (2013) · Nature Materials · doi:10.1038/nmat3586 · Cited by 1,168
Self-citationZaman, M. H., Trapani, L. M., Sieminski, A. L., MacKellar, D., Gong, H., Kamm, R. D., Wells, A., Lauffenburger, D. A., & Matsudaira, P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0604460103 · Cited by 1,160
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Self-citationBilliet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Loessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Cited by
Items 101–200 of 298
Gelation of Uniform Interfacial Diffusant in Embedded 3D Printing
Shin, S., Brunel, L. G., Cai, B., Kilian, D., Roth, J. G., Seymour, A. J., & Heilshorn, S. C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202307435 · Cited by 40
4D Printed Shape Memory Anastomosis Ring with Controllable Shape Transformation and Degradation
Peng, W., Yin, J., Zhang, X., Shi, Y., Che, G., Zhao, Q., & Liu, J. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214505 · Cited by 39
Zhang, H., Chen, Q., Shi, Z., Xue, J., Hao, J., Huang, J., Du, L., Lu, H., & Wu, C. (2024) · National Science Review · doi:10.1093/nsr/nwae035 · Cited by 40
“%) with thermo-sensitive and photo-crosslinking properties were used as the fundamental hydrogel matrix [24 ].”
MethodChen, S., Wang, Y., Zhang, X., Ma, J., & Wang, M. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112364 · Cited by 38
Jongprasitkul, H., Turunen, S., Parihar, V. S., & Kellomäki, M. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01418 · Cited by 37
Hao, L., Tao, X., Feng, M., Zhou, K., He, Y., Yang, J., Mao, H., & Gu, Z. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00688 · Cited by 37
Self-citationPhoto-/thermo-responsive bioink for improved printability in extrusion-based bioprinting
Moon, S. H., Park, T. Y., Chi, H. J., & Yang, Y. J. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.100973 · Cited by 41
“SF alone has low viscosity (around 0.05 – 0.1 Pa s), making it challenging to achieve high printability without additional measures such as using higher molecular weight SF or incorporating additives for crosslinking during printing [106,107].”
BackgroundInfluentialLi, S., Huang, C., Liu, H., Han, X., Wang, Z., Huang, J. S., Yan, Y., & Wang, Z. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00952 · Cited by 36
3D printed tissue models: From hydrogels to biomedical applications
Cadamuro, F., Nicotra, F., & Russo, L. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.01.048 · Cited by 38
Liu, S., Hu, Q., Shen, Z., Krishnan, S., Zhang, H., & Ramalingam, M. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.27954 · Cited by 34
“The viscoelastic properties of the A‐SA‐Gel hydrogel exhibited shear thinning behavior (Figure 2a), similar to the other bioinks, such as cellulose nanofibers and methacrylated gelatin (GelMA) composite bioink (Ouyang et al., 2020) and vascular‐tissue‐derived decellularized extracellular matrix (VdECM) and alginate‐ba…”
Background3D bioprinted colorectal cancer models based on hyaluronic acid and signalling glycans
Cadamuro, F., Marongiu, L., Marinò, M., Tamini, N., Nespoli, L. C., Zucchini, N., Terzi, A., Altamura, D., Gao, Z., Giannini, C., et al. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120395 · Cited by 36
Recent Developments in Glioblastoma‐On‐A‐Chip for Advanced Drug Screening Applications
Maity, S., Bhuyan, T., Jewell, C., Kawakita, S., Sharma, S., Nguyen, H. T., Najafabadi, A. H., Ermis, M., Falcone, N., Chen, J., et al. (2024) · Small · doi:10.1002/smll.202405511 · Cited by 34
Ort, C., Chen, Y., Ghagre, A., Ehrlicher, A. J., & Moraes, C. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00129 · Cited by 33
Xiao, X., Huang, Z., Jiang, X., Yang, Y.-C., Yang, L., Yang, S., Niu, C., Xu, Y., & Feng, L. (2022) · Polymer · doi:10.1016/j.polymer.2022.124696 · Cited by 34
Sullivan, M. A., Lane, S., Volkerling, A. M., Engel, M., Werry, E. L., & Kassiou, M. (2023) · Biotechnology and Bioengineering · doi:10.1002/bit.28470 · Cited by 32
Advances in 4D printing of biodegradable photopolymers
Ma, Y., Shih, C., & Bao, Y. (2024) · Responsive materials · doi:10.1002/rpm.20240008 · Cited by 31
Li, Y., Chen, L., Stehle, Y. Y., Lin, M., Wang, C., Zhang, R., Huang, M., Li, Y., & Zou, Q. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.07.018 · Cited by 31
Multilayered Shape-Morphing Scaffolds with a Hierarchical Structure for Uterine Tissue Regeneration
Chen, S., Tan, S., Zheng, L. W., & Wang, M. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14983 · Cited by 33
Feng, P., Qiu, H., Luo, Y. H., Hu, J., Cao, Y., Pang, Q., Mou, X., Hou, R., Hou, W., & Zhu, Y. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00600 · Cited by 30
Thermal Shrinking of Biopolymeric Hydrogels for High Resolution 3D Printing of Kidney Tubules
Viola, M., Valverde, M. G., Bernal, P. N., van Trijp, J. P., Hak, J., Marco, G. D., Neumann, M., Schuurmans, C. C. L., van Nostrum, C. F., Masereeuw, R., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202406098 · Cited by 29
Biofabrication and biomanufacturing in Ireland and the UK
Murphy, J. F., Lavelle, M., Asciak, L., Burdis, R., Levis, H. J., Ligorio, C., McGuire, J., Polleres, M., Smith, P. O., Tullie, L., et al. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00316-z · Cited by 30
“…in recent years, Prof. Stevens and others have explored the development of new classes of bioinks which extend the biofabrication window by providing the necessary physiochemical properties required for 3D deposition without compromising the functionality of the encapsulated biologics [174, 175].”
Self-citationAqueous Two‐Phase Emulsion Bioresin for Facile One‐Step 3D Microgel‐Based Bioprinting
Wang, Q., Karadaş, Ö., Backman, O., Wang, L., Näreoja, T., Rosenholm, J. M., Xu, C., & Wang, X. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203243 · Cited by 29
Tournier, P., Saint‐Pé, G., Lagneau, N., Loll, F., Halgand, B., Tessier, A., Guicheux, J., Visage, C. L., & Delplace, V. (2023) · Advanced Science · doi:10.1002/advs.202300055 · Cited by 28
Dynamic bioinks for tissue/organ bioprinting: Principle, challenge, and perspective
Ma, D., Lu, W. W., Liu, W., Liu, W., & Ruan, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101527 · Cited by 31
Engineering Neurovascular Unit and Blood–Brain Barrier for Ischemic Stroke Modeling
Liu, Z., Tang, Y., Zhang, Z., Liu, Q., Wang, M., Li, W., & Yang, G. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202638 · Cited by 29
3D bioprinting of high-performance hydrogel with in-situ birth of stem cell spheroids
Zhu, S., Liao, X., Xu, Y., Zhou, N., Pan, Y., Song, J., Zheng, T., Zhang, L., Bai, L., Wang, Y., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.09.033 · Cited by 30
All‐Aqueous Embedded 3D Printing for Freeform Fabrication of Biomimetic 3D Constructs
Deng, X., Cheng, Q., Meng, S., Dong, H., Wang, T., Liu, Z., & Kong, T. (2024) · Advanced Materials · doi:10.1002/adma.202406825 · Cited by 26
3D bioprinting for the production of a perfusable vascularized model of a cancer niche
Maggiotto, F., Bova, L., Micheli, S., Pozzer, C., Fusco, P., Sgarbossa, P., Billi, F., & Cimetta, E. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1484738 · Cited by 29
Enabling 3D printability and vascular morphogenesis with double network dynamic hydrogels
Xu, R., Dou, B., Yu, S., Wang, Z., Zhang, Y., Leng, L., Ouyang, L., & Sun, W. (2025) · Materials Today · doi:10.1016/j.mattod.2025.01.019 · Cited by 29
Self-citationFluid Mechanics Challenges in Direct-Ink-Writing Additive Manufacturing
Sauret, A., Ray, T. R., & Compton, B. G. (2025) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-100224-111013 · Cited by 34
Latif, M., Jiang, Y., & Kim, J. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121197 · Cited by 25
Mei, X., Yang, Z., Wang, X., Shi, A., Blanchard, J., Elahi, F. M., Kang, H., Orive, G., & Zhang, Y. S. (2025) · Lab on a Chip · doi:10.1039/d4lc00280f · Cited by 27
Dual crosslinkable bioink for direct and embedded 3D bioprinting at physiological temperature
Wang, Y., Yue, H., Liu, A., Cui, Y., Hou, Y., Ni, X., Pereira, R. F., Huang, B., Vyas, C., & Bártolo, P. (2025) · Materials Today · doi:10.1016/j.mattod.2025.02.005 · Cited by 26
3D printing stiff antibacterial hydrogels for meniscus replacement
Yang, R., Fan, C., Dou, Y., Zhang, X., Xu, Z., Zhang, Q., Sun, Y., Yang, Q., & Liu, W. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101089 · Cited by 24
Addition of High Acyl Gellan Gum to Low Acyl Gellan Gum Enables the Blends 3D Bioprintable
Akkineni, A. R., Elci, B. S., Lode, A., & Gelinsky, M. (2022) · Gels · doi:10.3390/gels8040199 · Cited by 24
“, more than 70% of gelatin from scaffolds 3D printed with various bioinks (containing 5% (w/w) gelatin) was released within one day, when incubated in PBS at 37 ◦C [36].”
BackgroundDutta, S. D., Patil, T. V., Ganguly, K., Randhawa, A., Acharya, R., Moniruzzaman, M., & Lim, K. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121232 · Cited by 25
Xiao, X., Yang, Y.-C., Lai, Y., Huang, Z., Li, C., Yang, S., Niu, C., Yang, L., & Feng, L. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00887 · Cited by 25
Extrusion bioprinting from a fluid mechanics perspective
Gharraei, R., Bergstrom, D. J., & Chen, D. (2024) · International Journal of Bioprinting · doi:10.36922/ijb.3973 · Cited by 31
Bolander, J., Mota, C., Ooi, H. W., Agten, H., Baker, M. B., Moroni, L., & Luyten, F. P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104159 · Cited by 24
Wu, Y., Sun, J., Lin, Q. D., Wang, D., & Hai, J. (2023) · Neural Regeneration Research · doi:10.4103/1673-5374.382252 · Cited by 24
Wu, J., Wu, C., Zou, S., Li, X., Ho, B., Sun, R., Liu, C., & Chen, M. (2023) · Bioengineering · doi:10.3390/bioengineering10121358 · Cited by 24
“To overcome the limited types of printable bioinks, Ouyang et al. added thermally reversible gelatin to bioinks to form an interpenetrating network, which improves the printability of different bioinks [15].”
BackgroundLai, J., Xiong, T., Chen, S., Zhou, Z., Liu, J., Yang, B., Tuan, R. S., & Li, Z. A. (2025) · Advanced Science · doi:10.1002/advs.202509449 · Cited by 22
Jin, X., Fu, Q., Gu, Z., Zhang, Z., & Lv, H. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.06.087 · Cited by 23
A Small‐Molecule Polycationic Crosslinker Boosts Alginate‐Based Bioinks for Extrusion Bioprinting
Gao, C., Tang, L., Qu, H., Wu, M., Zhou, T., Wen, C., Wang, P., Xu, N., & Ruan, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202310369 · Cited by 22
Extrusion bioprinting: meeting the promise of human tissue biofabrication?
Holland, I. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/adb254 · Cited by 26
“The need to operating inside the printability window has led to the often cited comment that there are not enough bioinks available for the extrusion bioprinting needs of researchers [184, 195–197].”
Proteolytic remodeling of 3D bioprinted tumor microenvironments
Boroojeni, F. R., Naeimipour, S., Lifwergren, P., Abrahamsson, A. E., Dabrosin, C., Selegård, R., & Aili, D. (2023) · Biofabrication · doi:10.1088/1758-5090/ad17d1 · Cited by 23
“Extrusion based bioprinting [14] relies on layer-by-layer deposition of cell laden biomaterials [15].”
BackgroundLee, G. W., Chandrasekharan, A., Roy, S., Thamarappalli, A., Mahaling, B., Lee, H., Seong, K., Ghosh, S., & Yang, S. Y. (2024) · Biofabrication · doi:10.1088/1758-5090/ad35eb · Cited by 25
“The PA absorbs excess light and confines photocrosslinking to the desired layer thickness [57], which is necessary to fabricate complex constructs in DLP printing.”
Zhou, Z., Samperi, M., Santu, L. T., Dizon, G. C., Aboarkaba, S., Limón, D., Tuck, C. J., Pérez‐García, L., Irvine, D. J., Amabilino, D. B., et al. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109792 · Cited by 21
“…approaches to interlayer adhesion have been devised there is still a need for a simple, general method to achieve good interlayer adhesion [21,26–29] To overcome the abovementioned problems, low-molecular-weight gelators (LMWG) are proposed to act as a fast-forming network to support a hydrogel…”
BackgroundMethodBiofabrication Strategies for Musculoskeletal Disorders: Evolution towards Clinical Applications
Naghieh, S., Lindberg, G. C. J., Tamaddon, M., & Liu, C. (2021) · Bioengineering · doi:10.3390/bioengineering8090123 · Cited by 23
“demonstrated that unmodified gelatin can be used to obtain a wide range of printable bioinks [98].”
BackgroundZeng, Q., Yang, Y., Wang, H., Tan, Y., Wang, Z., Chai, M., Lu, Z., He, S., Yang, H., Zhang, J. Z., et al. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123573 · Cited by 24
Zhou, K., Ding, R., Tao, X., Cui, Y., Yang, J., Mao, H., & Gu, Z. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.08.008 · Cited by 20
Self-citationEngineered Customizable Microvessels for Progressive Vascularization in Large Regenerative Implants
Li, C., Han, X., Ma, Z., Jie, T., Wang, J., Deng, L., & Cui, W. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101836 · Cited by 20
Li, L., Gil, C. J., Finamore, T. A., Evans, C. J., Tomov, M. L., Ning, L., Theus, A. S., Kabboul, G., Serpooshan, V., & Roeder, R. K. (2022) · Advanced NanoBiomed Research · doi:10.1002/anbr.202200022 · Cited by 21
One-step bioprinting of endothelialized, self-supporting arterial and venous networks
Cai, B., Kilian, D., Ghorbani, S., Roth, J. G., Seymour, A. J., Brunel, L. G., Mejia, D. R., Rios, R. J., Szabo, I. M., Iranzo, S. C., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adab26 · Cited by 23
“In layer-by-layer printing, a hollow structure is fabricated by directly depositing filaments to form the channel walls [24–26], while in coaxial extrusion, a core–shell nozzle is used to extrude a filament with a hollow lumen [9, 21, 27–31].”
Innovative Approaches in Bone Tissue Engineering: Strategies for Cancer Treatment and Recovery
Khobragade, S., Deshmukh, M. P., VYAS, U. B., & Ingle, R. G. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26093937 · Cited by 22
Liao, Z., Niu, Y., Wang, Z., Chen, J., Sun, X., Dong, L., & Wang, C. (2022) · Advanced Science · doi:10.1002/advs.202203236 · Cited by 18
Liu, Q., Yang, J., Wang, Y., Wu, T., Liang, Y., Deng, K., Luan, G., Chen, Y., Huang, Z., & Yue, K. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00057 · Cited by 19
Maggiotto, F., Valle, E. D., Fietta, A., Visentin, L. M., Giomo, M., & Cimetta, E. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101974 · Cited by 32
Traceless Photopolymerization with Non‐Pulsed Red Light Enables 3D‐Printable Cell‐Laden Hydrogels
Eftekhari, A., de Graaf, K. R., Takmakova, E., Jongprasitkul, H., Efimov, A., Turunen, S., Kerr, A., Kellomäki, M., Luxenhofer, R., Laaksonen, T., et al. (2025) · Advanced Materials · doi:10.1002/adma.202502386 · Cited by 20
Mechanical mapping of bioprinted hydrogel models by brillouin microscopy
Mahmodi, H., Piloni, A., Utama, R. H., & Kabakova, I. V. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00151 · Cited by 19
Wang, L., Wang, K., Yang, M., Yang, X., Li, D., Liu, M., Niu, C., Zhao, W., Li, W., Fu, Q., et al. (2023) · Advanced Science · doi:10.1002/advs.202302574 · Cited by 18
Nested Biofabrication: Matryoshka‐Inspired Intra‐Embedded Bioprinting
Alioglu, M. A., Yilmaz, Y. O., Singh, Y. P., Nagamine, M., Celik, N., Kim, M. H., Pal, V., Gupta, D., & Ozbolat, I. T. (2023) · Small Methods · doi:10.1002/smtd.202301325 · Cited by 19
An oxygenating colloidal bioink for the engineering of biomimetic tissue constructs
Jeong, S., Hiemstra, J., Blokzijl, P. V., Damián-Ferrara, R., Santos, D. M. D., da Fonseca, J. H. L., Kang, M., Kim, J., Yilmaz‐Aykut, D., Cham‐Pérez, M. L. L., et al. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00281-7 · Cited by 21
“Thus, a microstructural design that possesses high interconnectivity among bioprinted hydrogel-based constructs is required to promote tissue integrity following printing for clinical applications [10].”
InfluentialWang, Y., Hou, Y., Vyas, C., Huang, B., & Bártolo, P. (2025) · Materials Futures · doi:10.1088/2752-5724/adb7f6 · Cited by 19
“The sol–gel transition of GelMA derives from the polypeptide chain entanglement at low temperatures [58–60], whereas the gel formation of MCMA above the lower critical solution temperature is because of the hydrophobic association and self-assembly processes [61, 62].”
Zhou, K., Feng, M., Mao, H., & Gu, Z. (2022) · Biomaterials Science · doi:10.1039/d2bm00632d · Cited by 19
Self-citationNanostarch-Stimulated Cell Adhesion in 3D Bioprinted Hydrogel Scaffolds for Cell Cultured Meat
Niu, R., Xin, Q., Xu, E., Yao, S., Chen, M., & Liu, D. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c03585 · Cited by 19
Yue, H., Wang, Y., Fernandes, S., Vyas, C., & Bártolo, P. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400587 · Cited by 16
Almalla, A., Elomaa, L., Fribiczer, N., Landes, T., Tang, P., Mahfouz, Z., Koksch, B., Hillebrandt, K. H., Sauer, I. M., Heinemann, D., et al. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213850 · Cited by 17
A Cell Pre‐Wrapping Seeding Technique for Hydrogel‐Based Tubular Organ‐On‐A‐Chip
Nie, J., Lou, S., Pollet, A. M. A. O., van Vegchel, M., Bouten, C. V. C., & den Toonder, J. M. J. (2024) · Advanced Science · doi:10.1002/advs.202400970 · Cited by 19
Integrating Engineered Living Materials with 3D Bioprinting
Moon, T. S., & Yum, K. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202500934 · Cited by 16
A Porous Gelatin Methacrylate‐Based Material for 3D Cell‐Laden Constructs
Bova, L., Maggiotto, F., Micheli, S., Giomo, M., Sgarbossa, P., Gagliano, O., Falcone, D., & Cimetta, E. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200357 · Cited by 21
Chandel, A. K. S., Madhavikutty, A. S., Okada, S., Zhang, Q., Inagaki, N. F., Ohta, S., & Ito, T. (2024) · Biomaterials Science · doi:10.1039/d3bm01279d · Cited by 16
3D Biofabrication of Microporous Hydrogels for Tissue Engineering
Liu, Z., Wu, J., Luo, Z., Hou, Y., Xuan, L., Changyi, X., Chang, J., Zhang, D., Zheng, G., Guo, J., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403583 · Cited by 20
Kilian, D., Poddar, A., Desrochers, V., Heinemann, C., Halfter, N., Liu, S., Rother, S., Gelinsky, M., Hintze, V., & Lode, A. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213319 · Cited by 15
Effect of viscosity of gelatin methacryloyl-based bioinks on bone cells
Rashad, A., Gomez, A., Gangrade, A., Zehtabi, F., Mandal, K., Maity, S., Ma, C., Li, B., Khademhosseini, A., & de Barros, N. R. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d91 · Cited by 14
“Ouyang et al reported the thermal liberation of gelatin from bioinks with a complementary thermo-reversible gelatin network [24].”
Song, S., Li, Y., Huang, J., & Zhang, Z. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200181 · Cited by 14
Guo, K., Wang, H., Li, S., Chang, P., He, C., Sun, Q., & Zheng, X. (2023) · Biofabrication · doi:10.1088/1758-5090/acc760 · Cited by 15
“…gelatin, F127, and other sacrificial materials to support low-viscosity materials and remove them after crosslinking [47, 48]; 2. use a transparent needle to crosslink low-viscosity materials in situ at the nozzle [49]; 3. add temperature-sensitive materials such as gelatin to assist printing [50].”
Banerjee, A., Datta, S., Das, A., Chowdhury, A. R., & Datta, P. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2021.0238 · Cited by 14
Rahman, T. T., Wood, N., Akib, Y. M., Qin, H., & Pei, Z. (2024) · Bioengineering · doi:10.3390/bioengineering11090862 · Cited by 13
“This method involves staining cells with a mixture of fluorophores, where one fluorophore marks live cells and the other marks dead cells, allowing for the visualization and calculation of the percentage of live cells [36].”
Method3D bioprinting technology and equipment based on microvalve control
Kang, R., Wu, J., Cheng, R., Li, M., Sang, L., Zhang, H., & Sang, S. (2024) · Biotechnology and Bioengineering · doi:10.1002/bit.28850 · Cited by 13
“Over the past decade, 3D bioprinting technology has become a mainstream technology in many biomedical fields, widely applied in areas such as tissue engineering, disease modeling, and drug testing (Daly et al., 2021; Levato et al., 2020; Ouyang et al., 2020a).”
Remedying infectious bone defects via 3D printing technology
Wang, J., Zhao, P., Li, M., Li, J., & Lin, Y. (2024) · Chinese Chemical Letters · doi:10.1016/j.cclet.2024.110686 · Cited by 17
Self-citationChoi, W., & Hong, J. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.02.003 · Cited by 15
Harnessing electrostatic interactions for enhanced printability of alginate-based bioinks
Bai, J., Navara, A. M., Zhao, L., Song, Y., Yang, X., Lian, X., & Mikos, A. G. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00215 · Cited by 14
Muzio, L. D., Paolicelli, P., Trilli, J., Petralito, S., Carriero, V. C., Brandelli, C., Spano, M., Sobolev, A. P., Mannina, L., & Casadei, M. A. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119916 · Cited by 13
Engineering Multi‐Scale Organization for Biotic and Organic Abiotic Electroactive Systems
Yao, Z., Lundqvist, E. M., Kuang, Y., & Ardoña, H. A. M. (2023) · Advanced Science · doi:10.1002/advs.202205381 · Cited by 16
(Bio)fabrication of microfluidic devices and organs-on-a-chip
Hrynevich, A., Li, Y., Cedillo‐Servín, G., Malda, J., & Castilho, M. D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00001-8 · Cited by 15
Bo, T., Pascucci, E., Capuani, S., Campa‐Carranza, J. N., Franco, L., Farina, M., Secco, J., Becchi, S., Cavazzana, R., Joubert, A. L., et al. (2024) · Biomedical Microdevices · doi:10.1007/s10544-024-00713-2 · Cited by 12
Luo, X., Pang, Z., Li, J., Anh, M., Kim, B. S., & Gao, G. (2024) · iScience · doi:10.1016/j.isci.2024.111215 · Cited by 12
Sobreiro‐Almeida, R., Santos, S. C., Decarli, M. C., Costa, M., Correia, T. R., Babilotte, J., Custódio, C. A., Moroni, L., & Mano, J. F. (2024) · Advanced Science · doi:10.1002/advs.202406569 · Cited by 12
Korkeamäki, J. T., Rashad, A., Ojansivu, M., Karvinen, J., Koivisto, J. T., Syverud, K., Kellomäki, M., Miettinen, S., & Mustafa, K. (2025) · Biofabrication · doi:10.1088/1758-5090/ada63b · Cited by 15
“However, without crosslinking, at cell culture temperatures gelatin returns to a sol-like status, dissolves, and escapes the ink matrix [9].”
Bai, X., Yang, Y., Chu, J., Deng, Y., Li, M., & Yang, H. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1643430 · Cited by 14
Three-dimensional bioprinting of in vitro tumor organoid and organ-on-a-chip models
Anderson, S. R., Stagner, E., Sivakumar, H., & Skardal, A. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00559-8 · Cited by 13
Bioinspired coacervate-based bioinks for construction of multiscale tissue engineering scaffolds
Guo, Z., Zhang, S., Guo, Y., Xia, J., Wu, X., Hu, H., Hu, R., Huang, F., Gao, Q., Liu, C., et al. (2024) · Nano Research · doi:10.1007/s12274-024-6844-6 · Cited by 11
Zhang, H., Yu, R., Xia, Y., Liu, J., Tu, R., Shi, J. F., & Dai, H. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00666f · Cited by 12
Competing Self‐Assembly to Access Helical Chitin Nanofibers for Advanced Chitinous Materials
Lin, X., Feng, Y., Jia, Q., Jiang, K., Xiang, J., Chen, L., Chen, P., Zheng, A., & Duan, B. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202503547 · Cited by 11
Guo, Y., Wang, Z., Zhang, X., Li, J., Gao, S., Lv, Y., & Ouyang, L. (2025) · Small · doi:10.1002/smll.202501594 · Cited by 11
Self-citationBebiano, L. B., Presa, R., Fernandes, L., Lourenço, B. N., Chaudhuri, O., & Pereira, R. F. (2025) · Materials Today · doi:10.1016/j.mattod.2025.03.019 · Cited by 11
Construction of stable niches for denitrifiers using 3D bioprinting for efficient nitrogen removal
Liu, Y., Zhao, T., Wu, Y., Niu, J., Chao, C., & Zhao, Y. (2025) · Water Research · doi:10.1016/j.watres.2025.123916 · Cited by 12
Visualization and bibliometric analysis of 3D printing in cartilage regeneration
Yang, Z., Li, J., Deng, H., Li, H., Zhao, T., Gao, T., Xing, D., & Lin, J. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1214715 · Cited by 11
“The bioprinting process is usually divided into three steps: 1) design modeling: CT and MRI techniques are used to obtain data on the characteristics of biological tissues or organs, and 3D models are constructed with the help of computer-aided design and computer-aided manufacturing (CADCAM); 2) bioink selection: bio…”
MethodLong-term in vitro culture of 3D brain tissue model based on chitosan thermogel
Lisa, D. D., Muzzi, L., Lagazzo, A., Andolfi, A., Martinoia, S., & Pastorino, L. (2023) · Biofabrication · doi:10.1088/1758-5090/ad0979 · Cited by 13
“Additionally, injection forces for both formulations were also assessed using needles with inner diameters ranging from 18 G to 20 G, which are also utilized in 3D bioprinting [68].”
Method
Metadata
- Authors
- Ouyang, L., Armstrong, J. P. K., Lin, Y., Wojciechowski, J. P., Lee-Reeves, C., Hachim, D., Zhou, K., Burdick, J. A., & Stevens, M. M.
- Affiliations
- Imperial College London (GB)
- University of Pennsylvania (US)
- Corresponding author
- Stevens, Molly M.
- ORCID
- Venue
- Science Advances
- Published
- 2020-09-18
- Volume
- 6
- Issue
- 38
- ISSN
- 2375-2548 (ISSN-L)
- PMC
- PMC7500929
- OpenAlex
- W3087699589
- Cited by
- 293
- References
- 43
- Citations by year
- 2026: 30 · 2025: 59 · 2024: 49 · 2023: 59 · 2022: 54 · 2021: 40 · 2020: 2
- FWCI
- 12.14
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Science Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Explore Bristol Research (submittedVersion, cc-by-nc)
- Spiral (Imperial College London) (submittedVersion, other-oa)
- Spiral (Imperial College London) (submittedVersion, cc-by)
- Funders
- H2020 Marie Skłodowska-Curie Actions (No 839111)
- Medical Research Council (MR/S00551X/1)
- Engineering and Physical Sciences Research Council (EP/P001114/1, No 1975740)
- UK Regenerative Medicine Platform (MR/R015651/1)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- 3D bioprinting, bioinks, photocrosslinkable polymers, hydrogels, tissue engineering, chitosan, alginate, heparin, dextran, chondroitin sulfate, hyaluronic acid, polyethylene glycol, natural and synthetic polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.