CoChat

High-entropy alloy electrocatalysts go to (sub-)nanoscale

Open access

The DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.

Abstract

Alloying has proven power to upgrade metallic electrocatalysts, while the traditional alloys encounter limitation for optimizing electronic structures of surface metallic sites in a continuous manner. High-entropy alloys (HEAs) overcome this limitation by manageably tuning the adsorption/desorption energies of reaction intermediates. Recently, the marriage of nanotechnology and HEAs has made considerable progresses for renewable energy technologies, showing two important trends of size diminishment and multidimensionality. This review is dedicated to summarizing recent advances of HEAs that are rationally designed for energy electrocatalysis. We first explain the advantages of HEAs as electrocatalysts from three aspects: high entropy, nanometer, and multidimension. Then, several structural regulation methods are proposed to promote the electrocatalysis of HEAs, involving the thermodynamically nonequilibrium synthesis, regulating the (sub-)nanosize and anisotropic morphologies, as well as engineering the atomic ordering. The general relationship between the electronic structures and electrocatalytic properties of HEAs is further discussed. Finally, we outline remaining challenges of this field, aiming to inspire more sophisticated HEA-based nanocatalysts.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.adn2877

Cites

149 of 149 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1. Historical timeline of breakthroughs in HEAs for energy electrocatalysis. Bulk HEAs were first presented in 2004. The data are reproduced with permission from John Wiley and Sons (19). A multielemental immiscible nanoparticle library with phase segregation was built in 2016. The data are reproduced with permission from the American Association for the Advancement of Science (30). Then, single-phase HEA nanoparticles were successfully synthesized for heterogeneous catalysis in 2018. The data are reproduced with permission from the American Association for the Advancement of Science (31). Afterward, HEA electrocatalysts began to develop along two important trends of diminishment and multidimensionality. Recently, subnanosized HEA nanoparticles and high-entropy single atoms have been developed as high-efficient electrocatalysts for HER, MOR, and ORR electrocatalysis. The data are reproduced with permission from the Nature Publishing Group (32), the American Chemical Society (33), the American Chemical Society (34), and the Nature Publishing Group (35). In addition, HEAs were designed from 0D to 3D, including subnanowires, nanoplates, nanoribbons, aerogels, and ordered intermetallics, and can serve as high-efficient electrocatalysts for HOR, MOR, and CO2RR electrocatalysis. The data are reproduced with permission from the Nature Publishing Group (36), John Wiley and Sons (37), the American Chemical Society (38), John Wiley and Sons (39), and the American Chemical Society (40).
Fig. 1. Historical timeline of breakthroughs in HEAs for energy electrocatalysis. Bulk HEAs were first presented in 2004. The data are reproduced with permission from John Wiley and Sons (19). A multielemental immiscible nanoparticle library with phase segregation was built in 2016. The data are reproduced with permission from the American Association for the Advancement of Science (30). Then, single-phase HEA nanoparticles were successfully synthesized for heterogeneous catalysis in 2018. The data are reproduced with permission from the American Association for the Advancement of Science (31). Afterward, HEA electrocatalysts began to develop along two important trends of diminishment and multidimensionality. Recently, subnanosized HEA nanoparticles and high-entropy single atoms have been developed as high-efficient electrocatalysts for HER, MOR, and ORR electrocatalysis. The data are reproduced with permission from the Nature Publishing Group (32), the American Chemical Society (33), the American Chemical Society (34), and the Nature Publishing Group (35). In addition, HEAs were designed from 0D to 3D, including subnanowires, nanoplates, nanoribbons, aerogels, and ordered intermetallics, and can serve as high-efficient electrocatalysts for HOR, MOR, and CO2RR electrocatalysis. The data are reproduced with permission from the Nature Publishing Group (36), John Wiley and Sons (37), the American Chemical Society (38), John Wiley and Sons (39), and the American Chemical Society (40).CC BY · PubMed Central
Fig. 2. The advantages of HEAs for energy electrocatalysis. Schematic illustrations for (A) several effects of HEAs, (B) HEAs evolving from bulk to nanoscale, cluster, and atomic scale, and (C) HEAs evolving from nanoscale 0D to 1D, 2D, and 3D nanostructures.
Fig. 2. The advantages of HEAs for energy electrocatalysis. Schematic illustrations for (A) several effects of HEAs, (B) HEAs evolving from bulk to nanoscale, cluster, and atomic scale, and (C) HEAs evolving from nanoscale 0D to 1D, 2D, and 3D nanostructures.CC BY · PubMed Central
Fig. 3. Characterizations of HEAs for energy electrocatalysis. (A) PXRD pattern of FeCoNiMnRu HEA nanoparticles with detailed Rietveld refinements. Reproduced with permission from the Nature Publishing Group (65). (B) 3D-APT images of FeCoNiAlTi HEIs. Reproduced with permission from John Wiley and Sons (71). (C) Representative HRTEM image and AFM image of PtPdIrRuAg HEA subnanometer ribbons. Reproduced with permission from the American Chemical Society (38). In situ normalized XANES spectra of RhPtFeCoNi HEA nanoparticles recorded at different potentials in fluorescence mode at the (D) Rh K-edge and (E) Pt L3-edge. Reproduced with permission from the American Chemical Society (33).
Fig. 3. Characterizations of HEAs for energy electrocatalysis. (A) PXRD pattern of FeCoNiMnRu HEA nanoparticles with detailed Rietveld refinements. Reproduced with permission from the Nature Publishing Group (65). (B) 3D-APT images of FeCoNiAlTi HEIs. Reproduced with permission from John Wiley and Sons (71). (C) Representative HRTEM image and AFM image of PtPdIrRuAg HEA subnanometer ribbons. Reproduced with permission from the American Chemical Society (38). In situ normalized XANES spectra of RhPtFeCoNi HEA nanoparticles recorded at different potentials in fluorescence mode at the (D) Rh K-edge and (E) Pt L3-edge. Reproduced with permission from the American Chemical Society (33).CC BY · PubMed Central
Fig. 4. Synthesis of HEAs by nonequilibrium methods for efficient electrocatalysis. (A) Carbothermal shock strategy and the temporal evolution of temperature during the 55-ms thermal shock of HEA nanoparticles. Reproduced with permission from the American Association for the Advancement of Science (31). (B) Schematic illustration for the formation mechanism of HEA nanoparticles by the laser scanning ablation method [this synthesis involves the sequential processes of (i) pulse penetration, (ii) pulse absorption, (iii) plume expansion, (iv) bubble generation, and (v) bubble collapse]. Reproduced with permission from the Nature Publishing Group (76). (C) Schematic illustration for the droplets transporting through the carbonized wood microchannels heated to 2000 K via the carrier gas and the magnified wood microchannel. (D) EDS elemental mapping images of a 10-element AuCoCuIrPtMnMoNiPdRu HEA nanoparticle (scale bar, 20 nm). Reproduced with permission from Elsevier (84).
Fig. 4. Synthesis of HEAs by nonequilibrium methods for efficient electrocatalysis. (A) Carbothermal shock strategy and the temporal evolution of temperature during the 55-ms thermal shock of HEA nanoparticles. Reproduced with permission from the American Association for the Advancement of Science (31). (B) Schematic illustration for the formation mechanism of HEA nanoparticles by the laser scanning ablation method [this synthesis involves the sequential processes of (i) pulse penetration, (ii) pulse absorption, (iii) plume expansion, (iv) bubble generation, and (v) bubble collapse]. Reproduced with permission from the Nature Publishing Group (76). (C) Schematic illustration for the droplets transporting through the carbonized wood microchannels heated to 2000 K via the carrier gas and the magnified wood microchannel. (D) EDS elemental mapping images of a 10-element AuCoCuIrPtMnMoNiPdRu HEA nanoparticle (scale bar, 20 nm). Reproduced with permission from Elsevier (84).CC BY · PubMed Central
Fig. 5. Size regulation of HEAs for efficient electrocatalysis. EDS elemental mapping images of (A) PtNiFeCoCu, (B) NiCoFePtRh, and (C) IrPdPtRhRu HEA nanoparticles. Reproduced with permission from the Nature Publishing Group (32), the American Chemical Society (33), and the American Chemical Society (34). (D) Schematic illustration for the formation of HESACs by a movable type printing method. (E) High-resolution HAADF-STEM image of quinary FeCoNiCuMn HESACs. (F) EDS elemental mapping images of undecimal FeCoNiCuMnCrPtPdRuRhIr HESACs. Reproduced with permission from the Nature Publishing Group (54).
Fig. 5. Size regulation of HEAs for efficient electrocatalysis. EDS elemental mapping images of (A) PtNiFeCoCu, (B) NiCoFePtRh, and (C) IrPdPtRhRu HEA nanoparticles. Reproduced with permission from the Nature Publishing Group (32), the American Chemical Society (33), and the American Chemical Society (34). (D) Schematic illustration for the formation of HESACs by a movable type printing method. (E) High-resolution HAADF-STEM image of quinary FeCoNiCuMn HESACs. (F) EDS elemental mapping images of undecimal FeCoNiCuMnCrPtPdRuRhIr HESACs. Reproduced with permission from the Nature Publishing Group (54).CC BY · PubMed Central
Fig. 6. Morphological regulation of HEAs for efficient electrocatalysis. Schematic illustrations for the formation mechanism of (A) PtRhMoIrCoRuFeNiMnCr HEA nanowires and (B) PtPdIrRuAg HEA subnanometer ribbons. Reproduced with permission from Elsevier (72) and the American Chemical Society (38). (C) Photograph and corresponding sizes of NiCoFeCu MEAAs. Schematic illustrations for (D) the formation mechanism and (E) morphological evolutions of MEAAs. Reproduced with permission from John Wiley and Sons (104).
Fig. 6. Morphological regulation of HEAs for efficient electrocatalysis. Schematic illustrations for the formation mechanism of (A) PtRhMoIrCoRuFeNiMnCr HEA nanowires and (B) PtPdIrRuAg HEA subnanometer ribbons. Reproduced with permission from Elsevier (72) and the American Chemical Society (38). (C) Photograph and corresponding sizes of NiCoFeCu MEAAs. Schematic illustrations for (D) the formation mechanism and (E) morphological evolutions of MEAAs. Reproduced with permission from John Wiley and Sons (104).CC BY · PubMed Central
Fig. 7. Regulating disordering and ordering of HEAs for efficient electrocatalysis. (A) Representative atomic distributions in quinary HEMGs, HEAs, and HEIs. Schematic illustrations for the formation of (B) HEA nanoparticles by the nanodroplet-mediated electrodeposition method (current transient corresponding to the collision of a single nanodroplet onto a carbon fiber ultramicroelectrodes (UME) of 4 μm biased at −0.4 V versus Ag/AgCl) and (C) nanoporous (FeCoNiB0.75)97Pt3 HEMGs. Reproduced with permission from the Nature Publishing Group (110) and John Wiley and Sons (113). (D) Representative TEM image of PtRhBiSnSb HEI nanoplates. (E) Enlarged HAADF-STEM image of the typical Rh-substituted Pt columns. (F) Typical structural model of a crystalline unit. (G) Schematic illustration showing the atomic arrangement in (PtRh)(BiSnSb) HEI nanoplates. Reproduced with permission from John Wiley and Sons (37).
Fig. 7. Regulating disordering and ordering of HEAs for efficient electrocatalysis. (A) Representative atomic distributions in quinary HEMGs, HEAs, and HEIs. Schematic illustrations for the formation of (B) HEA nanoparticles by the nanodroplet-mediated electrodeposition method (current transient corresponding to the collision of a single nanodroplet onto a carbon fiber ultramicroelectrodes (UME) of 4 μm biased at −0.4 V versus Ag/AgCl) and (C) nanoporous (FeCoNiB0.75)97Pt3 HEMGs. Reproduced with permission from the Nature Publishing Group (110) and John Wiley and Sons (113). (D) Representative TEM image of PtRhBiSnSb HEI nanoplates. (E) Enlarged HAADF-STEM image of the typical Rh-substituted Pt columns. (F) Typical structural model of a crystalline unit. (G) Schematic illustration showing the atomic arrangement in (PtRh)(BiSnSb) HEI nanoplates. Reproduced with permission from John Wiley and Sons (37).CC BY · PubMed Central
Fig. 8. Water electrolyzer–related electrocatalytic applications of HEAs. (A) HER and (B) OER polarization curves of ZnNiIr, ZnNiCoIr, ZnNiCoIrFe, and ZnNiCoIrMn HEAs and commercial Pt/C or Ir/C catalysts. (C) Linear relationship between d-band center and hydrogen binding energy on ZnNiCoIr and ZnNiCoIrMn HEAs. (D) Energy landscape toward OER intermediates for ZnNiCoIr and ZnNiCoIrMn with U = 1.23 V. Reproduced with permission from John Wiley and Sons (131).
Fig. 8. Water electrolyzer–related electrocatalytic applications of HEAs. (A) HER and (B) OER polarization curves of ZnNiIr, ZnNiCoIr, ZnNiCoIrFe, and ZnNiCoIrMn HEAs and commercial Pt/C or Ir/C catalysts. (C) Linear relationship between d-band center and hydrogen binding energy on ZnNiCoIr and ZnNiCoIrMn HEAs. (D) Energy landscape toward OER intermediates for ZnNiCoIr and ZnNiCoIrMn with U = 1.23 V. Reproduced with permission from John Wiley and Sons (131).CC BY · PubMed Central
Fig. 9. Fuel cell–related electrocatalytic applications of HEAs. (A) Atomically resolved HAADF-STEM image of an individual PtIrFeCoNi HEI nanoparticle. (B) ORR polarization curves of PtIrFeCoNi HEI and HEA nanoparticles, carbon support, and commercial Pt/C in O2-saturated 0.1 M HClO4 solution. (C) Polarization and power density curves of the H2/O2 fuel cell with PtIrFeCoNi HEI nanoparticles as the cathode and commercial Pt/C as the anode under 1.0-bar O2 pressure. Reproduced with permission from the American Chemical Society (40). (D) Atomically resolved HAADF-STEM image of PdNiRuIrRh HEA nanoparticle. (E) HOR polarization curves of PdNiRuIrRh HEA nanoparticles, the corresponding single-metal counterparts, and commercial Pt/C in H2-saturated 0.1 M KOH. (F) Adsorption free energies of *H on the hollow-fcc sites of PdNiRuIrRh HEA nanoparticles and pure metal (111) facets. Reproduced with permission from John Wiley and Sons (142). (G) HAADF-STEM image of an individual PtBiPbNiCo core/shell HEA nanoplate. (H) FAOR curves of PtBiPbNiCo core/shell HEA nanoplates, PtPb nanoplates, and commercial Pt/C in 0.5 M H2SO4 + 0.5 M HCOOH. (I) Gibbs free energy diagram of PtBiPbNiCo core/shell HEA nanoplates toward FAOR electrocatalysis. Reproduced with permission from John Wiley and Sons (67).
Fig. 9. Fuel cell–related electrocatalytic applications of HEAs. (A) Atomically resolved HAADF-STEM image of an individual PtIrFeCoNi HEI nanoparticle. (B) ORR polarization curves of PtIrFeCoNi HEI and HEA nanoparticles, carbon support, and commercial Pt/C in O2-saturated 0.1 M HClO4 solution. (C) Polarization and power density curves of the H2/O2 fuel cell with PtIrFeCoNi HEI nanoparticles as the cathode and commercial Pt/C as the anode under 1.0-bar O2 pressure. Reproduced with permission from the American Chemical Society (40). (D) Atomically resolved HAADF-STEM image of PdNiRuIrRh HEA nanoparticle. (E) HOR polarization curves of PdNiRuIrRh HEA nanoparticles, the corresponding single-metal counterparts, and commercial Pt/C in H2-saturated 0.1 M KOH. (F) Adsorption free energies of *H on the hollow-fcc sites of PdNiRuIrRh HEA nanoparticles and pure metal (111) facets. Reproduced with permission from John Wiley and Sons (142). (G) HAADF-STEM image of an individual PtBiPbNiCo core/shell HEA nanoplate. (H) FAOR curves of PtBiPbNiCo core/shell HEA nanoplates, PtPb nanoplates, and commercial Pt/C in 0.5 M H2SO4 + 0.5 M HCOOH. (I) Gibbs free energy diagram of PtBiPbNiCo core/shell HEA nanoplates toward FAOR electrocatalysis. Reproduced with permission from John Wiley and Sons (67).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 149 references

Cited by

Metadata

Authors
Li, M., Lin, F., Zhang, S., Zhao, R., Tao, L., Li, L., Li, J., Zeng, L., Luo, M., & Guo, S.
Affiliations
Peking University (CN)
Corresponding author
Guo, Shaojun
Venue
Science Advances
Published
2024-06-07
Volume
10
Issue
23
Pages
eadn2877-eadn2877
ISSN
2375-2548 (ISSN-L)
OpenAlex
W4399376281
Cited by
177
References
149
Citations by year
2026: 84 · 2025: 86 · 2024: 7
FWCI
3.69
Type
journal article
Language
en
Open access
Licence
cc-by
Locations
  • Science Advances (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
  • Tencent
  • National Natural Science Foundation of China (52303361, 52025133)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
high-entropy alloys, electrocatalysts, nanocatalysts, electronic structure, atomic ordering, anisotropic morphology, non-equilibrium synthesis, size effect

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.