High-entropy alloy electrocatalysts go to (sub-)nanoscale
Open accessThe DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.
Abstract
Alloying has proven power to upgrade metallic electrocatalysts, while the traditional alloys encounter limitation for optimizing electronic structures of surface metallic sites in a continuous manner. High-entropy alloys (HEAs) overcome this limitation by manageably tuning the adsorption/desorption energies of reaction intermediates. Recently, the marriage of nanotechnology and HEAs has made considerable progresses for renewable energy technologies, showing two important trends of size diminishment and multidimensionality. This review is dedicated to summarizing recent advances of HEAs that are rationally designed for energy electrocatalysis. We first explain the advantages of HEAs as electrocatalysts from three aspects: high entropy, nanometer, and multidimension. Then, several structural regulation methods are proposed to promote the electrocatalysis of HEAs, involving the thermodynamically nonequilibrium synthesis, regulating the (sub-)nanosize and anisotropic morphologies, as well as engineering the atomic ordering. The general relationship between the electronic structures and electrocatalytic properties of HEAs is further discussed. Finally, we outline remaining challenges of this field, aiming to inspire more sophisticated HEA-based nanocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



![Fig. 4. Synthesis of HEAs by nonequilibrium methods for efficient electrocatalysis. (A) Carbothermal shock strategy and the temporal evolution of temperature during the 55-ms thermal shock of HEA nanoparticles. Reproduced with permission from the American Association for the Advancement of Science (31). (B) Schematic illustration for the formation mechanism of HEA nanoparticles by the laser scanning ablation method [this synthesis involves the sequential processes of (i) pulse penetration, (ii) pulse absorption, (iii) plume expansion, (iv) bubble generation, and (v) bubble collapse]. Reproduced with permission from the Nature Publishing Group (76). (C) Schematic illustration for the droplets transporting through the carbonized wood microchannels heated to 2000 K via the carrier gas and the magnified wood microchannel. (D) EDS elemental mapping images of a 10-element AuCoCuIrPtMnMoNiPdRu HEA nanoparticle (scale bar, 20 nm). Reproduced with permission from Elsevier (84).](https://figures.cochat.ai/paper-figures/7ac8ed05179042db800a243c8ce30af3/high-entropy-alloy-electrocatalysts-go-to-sub-nanoscale-figure-4.jpg)





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550 · cited 1×
“The increasing energy consumption and environmental issues have presented a severe challenge to the sustainable development of human society ( 1 ).”
BackgroundCombining theory and experiment in electrocatalysis: Insights into materials design
Seh, Z. W., Kibsgaard, J., Dickens, C. F., Chorkendorff, I., Nørskov, J. K., & Jaramillo, T. F. (2017) · Science · doi:10.1126/science.aad4998 · Cited by 12,114
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973 · cited 1×
“Considering the total alloy systems, the alloys constituted by more elements may strengthen the entropy driving force ( 41 ).”
BackgroundElectrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885 · cited 1×
“This stimulates the exploration of economical and eco-friendly energy generation, storage, and conversion involving the electrochemical processes ( 2 ).”
BackgroundGeorge, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047 · cited 3×
“Here, the Δ S mix of 1.5 R can be used as the boundary between HEAs and medium-entropy alloys (MEAs) and that of 1.0 R for medium-and low-entropy alloys (LEAs) ( 24 ).”
BackgroundMethodInfluentialMetal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles
Liu, L., & Corma, A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00776 · Cited by 4,777 · cited 1×
“Reducing the size of 0D nanomaterials to subnanoscale, even to single-atom catalysts, can enhance the surface atomic utilization ( 90 ).”
BackgroundMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071 · cited 1×
“Traditionally, HEAs prepared by top-down approach, such as mechanical alloying, high-energy ball milling, laser ablation, and arc melting, are all bulk, greatly losing the surface-active sites ( 27 – 29 ).”
BackgroundSluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366 · cited 1×
“Nevertheless, the sluggish diffusion effect is inconspicuous in traditional alloys, because the local atomic configurations before and after atoms enter vacancies are similar ( 47 ).”
BackgroundCarbothermal shock synthesis of high-entropy-alloy nanoparticles
Yao, Y., Huang, Z., Xie, P., Lacey, S. D., Jacob, R. J., Xie, H., Chen, F., Nie, A., Pu, T., Rehwoldt, M., et al. (2018) · Science · doi:10.1126/science.aan5412 · Cited by 2,101 · cited 6×
“In addition, by breaking through the thermodynamic immisci-bility limit, other shock-type strategies were also developed, including the fast-moving bed pyrolysis, microwave heating method, and ( 31 ).”
BackgroundMethodInfluentialSelf-citationHydrogen Oxidation and Evolution Reaction Kinetics on Platinum: Acid vs Alkaline Electrolytes
Sheng, W., Gasteiger, H. A., & Shao-Horn, Y. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3483106 · Cited by 1,829 · cited 1×
“Another key half-reaction in PEMFCs is hydrogen oxidation reaction (HOR), which mainly occurs within a fast kinetics in acidic conditions ( 141 ).”
BackgroundPdMo bimetallene for oxygen reduction catalysis
Luo, M., Zhao, Z., Zhang, Y., Sun, Y., Xing, Y., Lv, F., Yang, Y., Zhang, X., Hwang, S., Qin, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1603-7 · Cited by 1,461 · cited 1×
“This inhibits the growth of certain specific planes of metal nanocrystals, thus facilitating the acquisition of anisotropic nanostructures ( 96 ).”
BackgroundSelf-citationShort-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279 · cited 1×
“However, the definition based on entropy is still controversial, because many alloys with less than five elements still present a single-phase solid solution structure, such as CrCoNi and FeCrCoNi ( 42 , 43 ).”
BackgroundHigh-entropy nanoparticles: Synthesis-structure-property relationships and data-driven discovery
Yao, Y., Dong, Q., Brozena, A., Luo, J., Miao, J., Chi, M., Wang, C., Kevrekidis, I. G., Ren, Z. J., Greeley, J., et al. (2022) · Science · doi:10.1126/science.abn3103 · Cited by 1,081 · cited 1×
“Because of the several key advantages of HEAs, as discussed in the “Advantages of HEA Elec-trocatalysts” section, the adsorption energy can be broadened through reasonable electronic hybridization ( 25 , 122 , 123 ).”
BackgroundHigh-Entropy Alloys as a Discovery Platform for Electrocatalysis
Batchelor, T. A. A., Pedersen, J. K., Winther, S. H., Castelli, I. E., Jacobsen, K. W., & Rossmeisl, J. (2019) · Joule · doi:10.1016/j.joule.2018.12.015 · Cited by 982 · cited 2×
“However, the HOR in an alkaline environment is much more sluggish than that in acidic media, even two orders of magnitude lower ( 138 ).”
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
High-entropy materials for catalysis: A new frontier
Sun, Y., & Dai, S. (2021) · Science Advances · doi:10.1126/sciadv.abg1600 · Cited by 942 · cited 1×
“Although the d - band center has rationalized the improved electrocatalysis of unary/binary metal materials, it is not suitable for describing the activity of HEAs with complex structures ( 128 , 129 ).”
BackgroundKodama, K., Nagai, T., Kuwaki, A., Jinnouchi, R., & Morimoto, Y. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00824-w · Cited by 894 · cited 1×
“Polymer electrolyte membrane fuel cells (PEMFCs) have been widely spread in vehicles, portable electronics, smart grids, and military-related fields due to their low operating temperature, high power density, quick start-up, and nonpollution ( 5 ).”
BackgroundTunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845 · cited 1×
“However, the definition based on entropy is still controversial, because many alloys with less than five elements still present a single-phase solid solution structure, such as CrCoNi and FeCrCoNi ( 42 , 43 ).”
BackgroundHao, J., Zhuang, Z., Cao, K., Gao, G., Wang, C., Lai, F., Lu, S., Ma, P., Dong, W., Liu, T., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30379-4 · Cited by 757 · cited 2×
“Most HEAs show a single-phase structure, while a minority of them exhibit biphasic structures, showing additional diffraction patterns ( 65 – 67 ).”
BackgroundSantodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708 · cited 1×
“The lattice distortion effect not only optimizes the hardness, electrical, and thermal conductivity of HEAs but also dramatically improves their chemical properties ( 44 – 46 ).”
Background(2020) · doi:10.1038/s41467-020-19277-9 · Cited by 690 · cited 7×
“The data are reproduced with permission from the nature Publishing Group ( 32 ), the American chemical Society ( 33 ), the American chemical Society ( 34 ), and the nature Publishing Group ( 35 ). in addition, HeAs were designed from 0d to 3d, including subnanowires, nano-plates, nanoribbons,…”
BackgroundMethodInfluentialHierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678 · cited 1×
“…alloys (HEAs) were developed as an important kind of alloy system in 2004 ( 19 ), the research upsurge of HEAs in the scientific and industrial community has been set off, including cryogenic applications, biomedical materials, aerospace engineering, and photothermal conversion ( 20 – 23 ).”
BackgroundFeng, G., Ning, F., Song, J., Shang, H., Zhang, K., Ding, Z., Gao, P., Chu, W., & Xia, D. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c07643 · Cited by 560 · cited 5×
“The data are reproduced with permission from the nature Publishing Group ( 32 ), the American chemical Society ( 33 ), the American chemical Society ( 34 ), and the nature Publishing Group ( 35 ). in addition, HeAs were designed from 0d to 3d, including subnanowires, nano-plates, nanoribbons,…”
BackgroundMethodInfluentialGlasscott, M. W., Pendergast, A. D., Goines, S., Bishop, A. R., Hoang, A. T., Renault, C., & Dick, J. E. (2019) · Nature Communications · doi:10.1038/s41467-019-10303-z · Cited by 551 · cited 4×
“Note that the interconversion between HEMGs and HEIs occurs when the specific conditions are met, such as temperature, stoichiometry, and atom binding environment ( 110 – 112 ).”
BackgroundMethodInfluentialExceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., et al. (2022) · Science · doi:10.1126/science.abp8070 · Cited by 543
Noble-Metal Based Random Alloy and Intermetallic Nanocrystals: Syntheses and Applications
Zhou, M., Li, C., & Fang, J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00436 · Cited by 535
Synthesis of high-entropy alloy nanoparticles on supports by the fast moving bed pyrolysis
Gao, S., Hao, S., Huang, Z., Yuan, Y., Han, S., Lei, L., Zhang, X., Shahbazian-Yassar, R., & Lu, J. (2020) · Nature Communications · doi:10.1038/s41467-020-15934-1 · Cited by 533 · cited 1×
“Reproduced with permission from elsevier ( 84 ). continuous “droplet- to-particle” method ( 81 – 83 ).”
MethodStrategies to break linear scaling relationships
Pérez-Ramírez, J., & López, N. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0376-6 · Cited by 528
A high-entropy atomic environment converts inactive to active sites for electrocatalysis
Zhu, H., Sun, S., Hao, J., Zhuang, Z., Zhang, S., Wang, T., Kang, Q., Lu, S., Wang, X., Lai, F., et al. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03185j · Cited by 509 · cited 1×
“To identify the real electrocatalytically active sites of HEAs, low-electronegativity Mn and high-electronegativity Cu atoms were alloyed with Fe, Co, and Ni atoms to form the FeCoNiCuMn HEA nanoparticles ( 134 ).”
MethodSelf-citationMulti‐Sites Electrocatalysis in High‐Entropy Alloys
Li, H., Lai, J., Li, Z., & Wang, L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106715 · Cited by 494
High-Entropy Alloys as Catalysts for the CO 2 and CO Reduction Reactions
Pedersen, J. K., Batchelor, T. A. A., Bagger, A., & Rossmeisl, J. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04343 · Cited by 492
Platinum-Group-Metal High-Entropy-Alloy Nanoparticles
Wu, D., Kusada, K., Yamamoto, T., Toriyama, T., Matsumura, S., Kawaguchi, S., Kubota, Y., & Kitagawa, H. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04807 · Cited by 492 · cited 2×
“According to this hypothesis, Pt group metal– based HEA nanoparticles (RuRhPdOsIrPt) containing immiscible metals were successfully obtained in a single-phase solid solution ( 68 ).”
BackgroundMethodSubnanometer high-entropy alloy nanowires enable remarkable hydrogen oxidation catalysis
Zhan, C., Xu, Y., Bu, L., Zhu, H., Feng, Y., Yang, T., Zhang, Y., Yang, Z., Huang, B., Shao, Q., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26425-2 · Cited by 486 · cited 5×
“In this case, the tailorable active sites of multiple elements adjacent to each other allow HEAs to generate more unique properties in HOR electrocatalysis ( 36 , 72 , 142 ).”
BackgroundMethodInfluentialUnusual Sabatier principle on high entropy alloy catalysts for hydrogen evolution reactions
(2024) · doi:10.1038/s41467-023-44261-4 · Cited by 478 · cited 1×
“Because of the several key advantages of HEAs, as discussed in the “Advantages of HEA Elec-trocatalysts” section, the adsorption energy can be broadened through reasonable electronic hybridization ( 25 , 122 , 123 ).”
BackgroundSelf-citationWhat Makes High‐Entropy Alloys Exceptional Electrocatalysts?
Löffler, T., Ludwig, A., Rossmeisl, J., & Schuhmann, W. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202109212 · Cited by 464 · cited 1×
“Because of the several key advantages of HEAs, as discussed in the “Advantages of HEA Elec-trocatalysts” section, the adsorption energy can be broadened through reasonable electronic hybridization ( 25 , 122 , 123 ).”
BackgroundPolyelemental nanoparticle libraries
Chen, P.-C., Liu, X., Hedrick, J. L., Xie, Z., Wang, S., Lin, Q.-Y., Hersam, M. C., Dravid, V. P., & Mirkin, C. A. (2016) · Science · doi:10.1126/science.aaf8402 · Cited by 462 · cited 2×
“The data are reproduced with permission from the American Association for the Advancement of Science ( 30 ).”
BackgroundMethodHigh-entropy materials for energy and electronic applications
Schweidler, S., Botros, M., Strauss, F., Wang, Q., Ma, Y., Velasco, L., Cadilha Marques, G., Sarkar, A., Kübel, C., Hahn, H., et al. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00654-5 · Cited by 448 · cited 1×
“Since all kinds of high-entropy materials were applied in various heterogeneous catalytic reactions, HEAs have been rapidly developed in electrocatalysis ( 31 , 119 – 121 ).”
BackgroundHigh-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization
Nellaiappan, S., Katiyar, N. K., Kumar, R., Parui, A., Malviya, K. D., Pradeep, K. G., Singh, A. K., Sharma, S., Tiwary, C. S., & Biswas, K. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04302 · Cited by 447 · cited 2×
“…that the adsorption energy of key intermediates can be regulated by reasonable component de-sign, thereby optimizing the selectivity and activity of HEAs for CO 2 RR. Experimentally, AuAgPtPdCu HEA nanoparticles with fcc structures were demonstrated as an efficient CO 2 RR model catalyst ( 145 ).”
BackgroundMethodHigh-entropy single-atom activated carbon catalysts for sustainable oxygen electrocatalysis
Lei, X., Tang, Q., Zheng, Y., Kidkhunthod, P., Zhou, X., Ji, B., & Tang, Y. (2023) · Nature Sustainability · doi:10.1038/s41893-023-01101-z · Cited by 419 · cited 3×
“…the nature Publishing Group ( 32 ), the American chemical Society ( 33 ), the American chemical Society ( 34 ), and the nature Publishing Group ( 35 ). in addition, HeAs were designed from 0d to 3d, including subnanowires, nano-plates, nanoribbons, aerogels, and ordered intermetallics, and can…”
BackgroundEmerging materials and technologies for electrocatalytic seawater splitting
Jin, H., Xu, J., Liu, H., Shen, H., Yu, H., Jaroniec, M., Zheng, Y., & Qiao, S.-Z. (2023) · Science Advances · doi:10.1126/sciadv.adi7755 · Cited by 417 · cited 1×
“However, the current water electrolyzers display a higher cell voltage than that of the theoretical voltage of 1.23 V ( 124 ).”
BackgroundInfluentialCatalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions
Nakaya, Y., & Furukawa, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00356 · Cited by 415 · cited 1×
“Alloying has provided a promising strategy to regulate the electronic structures of surface or near-surface atoms via a unique strain/ligand effect, thus creating a variety of bimetallic or trimetallic electrocatalysts ( 11 – 13 ).”
BackgroundMetal-metal interactions in correlated single-atom catalysts
Shan, J., Ye, C., Jiang, Y., Jaroniec, M., Zheng, Y., & Qiao, S.-Z. (2022) · Science Advances · doi:10.1126/sciadv.abo0762 · Cited by 405 · cited 1×
“The suitable catalysts are necessary in these processes to lower the energy barrier and accelerate reaction kinetics to improve efficiency ( 3 ).”
BackgroundPt‐Based Nanocrystal for Electrocatalytic Oxygen Reduction
Zhao, Z., Chen, C., Liu, Z., Huang, J., Wu, M., Liu, H., Li, Y., & Huang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201808115 · Cited by 384 · cited 2×
“ORR is a key cathodic half-reaction of PEMFCs, while its sluggish kinetics severely hinders the further applications of PEMFCs ( 4 , 137 ).”
BackgroundLiquid metal for high-entropy alloy nanoparticles synthesis
Cao, G., Liang, J., Guo, Z., Yang, K., Wang, G., Wang, H., Wan, X., Li, Z., Bai, Y., Zhang, Y., et al. (2023) · Nature · doi:10.1038/s41586-023-06082-9 · Cited by 375
Wang, L., Ding, J., Chen, S., Jin, K., Zhang, Q., Cui, J., Wang, B., Chen, B., Li, T., Ren, Y., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01517-0 · Cited by 361 · cited 1×
“…alloys (HEAs) were developed as an important kind of alloy system in 2004 ( 19 ), the research upsurge of HEAs in the scientific and industrial community has been set off, including cryogenic applications, biomedical materials, aerospace engineering, and photothermal conversion ( 20 – 23 ).”
BackgroundA Novel Multinary Intermetallic as an Active Electrocatalyst for Hydrogen Evolution
Jia, Z., Yang, T., Sun, L., Zhao, Y., Li, W., Luan, J., Lyu, F., Zhang, L., Kruzic, J. J., Kai, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000385 · Cited by 356 · cited 1×
“3B) ( 71 ).”
Enrichment of reactants and intermediates for electrocatalytic CO2reduction
Yang, P.-P., & Gao, M.-R. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00849a · Cited by 347 · cited 4×
“Converting greenhouse CO 2 into value-added chemical fuels electro-chemically is another important technology for carbon-neutral economy ( 9 ).”
BackgroundInfluentialToward Electrocatalytic Methanol Oxidation Reaction: Longstanding Debates and Emerging Catalysts
Wang, J., Zhang, B., Guo, W., Wang, L., Chen, J., Pan, H., & Sun, W. (2023) · Advanced Materials · doi:10.1002/adma.202211099 · Cited by 339 · cited 3×
“Compared with hydrogen energy, liquid fuels can be conveniently handled, stored, and transferred ( 143 ).”
BackgroundMethodInfluentialChen, H., Fu, J., Zhang, P., Peng, H., Abney, C. W., Jie, K., Liu, X., Chi, M., & Dai, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01772g · Cited by 328 · cited 1×
“Since all kinds of high-entropy materials were applied in various heterogeneous catalytic reactions, HEAs have been rapidly developed in electrocatalysis ( 31 , 119 – 121 ).”
BackgroundMultifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
Yao, R., Zhou, Y., Shi, H., Wan, W., Zhang, Q., Gu, L., Zhu, Y., Wen, Z., Lang, X., & Jiang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009613 · Cited by 321 · cited 1×
“However, exerting a certain kind of reaction conditions onto the preparation process is beneficial for driving the reduction potentials of different metals to be in equilibrium ( 102 , 103 ).”
BackgroundGeneral synthesis of high-entropy alloy and ceramic nanoparticles in nanoseconds
Wang, B., Wang, C., Yu, X., Cao, Y., Gao, L., Wu, C., Yao, Y., Lin, Z., & Zou, Z. (2022) · Nature Synthesis · doi:10.1038/s44160-021-00004-1 · Cited by 321 · cited 3×
“Using this method, a series of HEA nanoparticles supported on carbon substrates were synthesized, and the substrates can be extended into other thermally sensitive substrates, such as Cu foam and glass ( 76 ).”
BackgroundMethodElectrocatalysts for the Oxygen Evolution Reaction in Acidic Media
Lin, Y., Dong, Y., Wang, X., & Chen, L. (2023) · Advanced Materials · doi:10.1002/adma.202210565 · Cited by 318 · cited 3×
“…); ruthenium (Ru)–/ iridium (Ir)–based materials are considered as the most effective elec-trocatalysts toward oxygen evolution reaction (OER) ( 7 , 8 ); copper (Cu)–based materials have been confirmed to be capable of producing C 2 /C 2 + hydrocarbons with high selectivity in CO 2 reduction…”
BackgroundNoble-Metal High-Entropy-Alloy Nanoparticles: Atomic-Level Insight into the Electronic Structure
Wu, D., Kusada, K., Nanba, Y., Koyama, M., Yamamoto, T., Toriyama, T., Matsumura, S., Seo, O., Gueye, I., Kim, J., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c13616 · Cited by 317 · cited 1×
“Because of the completely disordered distribution of metal atoms in HEAs, some metal atoms will lose their own properties, promoting the conversion of metal sites from inactive to active for catalyzing chemical reactions ( 132 , 133 ).”
BackgroundKwon, J., Sun, S., Choi, S., Lee, K., Jo, S., Park, K., Kim, Y. K., Park, H. B., Park, H. Y., Jang, J. H., et al. (2023) · Advanced Materials · doi:10.1002/adma.202300091 · Cited by 317 · cited 1×
“To this end, two kinds of nanoporous Ir-based ZnNiCoIrX (X = Fe, Mn) HEAs with high crystallinity were designed by dealloying with Zn elements as the sacrificial metals ( 131 ).”
Wu, D., Kusada, K., Yamamoto, T., Toriyama, T., Matsumura, S., Gueye, I., Seo, O., Kim, J., Hiroi, S., Sakata, O., et al. (2020) · Chemical Science · doi:10.1039/d0sc02351e · Cited by 315 · cited 1×
“To close this gap, hard x-ray photoelectron spectroscopy (HAXPES) was used to observe the valence band structure of HEA nanoparticles ( 130 ).”
MethodA General Synthetic Method for High-Entropy Alloy Subnanometer Ribbons
Tao, L., Sun, M., Zhou, Y., Luo, M., Lv, F., Li, M., Zhang, Q., Gu, L., Huang, B., & Guo, S. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c03544 · Cited by 312 · cited 5×
“3C) ( 38 ).”
BackgroundMethodInfluentialSelf-citationChen, W., Luo, S., Sun, M., Wu, X., Zhou, Y., Liao, Y., Tang, M., Fan, X., Huang, B., & Quan, Z. (2022) · Advanced Materials · doi:10.1002/adma.202206276 · Cited by 301 · cited 5×
“7C) ( 37 ).”
BackgroundMethodInfluentialBall, P., & Garwin, L. (1992) · Nature · doi:10.1038/355761a0 · Cited by 297 · cited 1×
“In addition, the nanoscale HEAs also exhibit unique properties similar to traditional nanomaterials, including discontinuity of electron energy levels, surface and interface effects, and quantum size and macroscopic quantum tunneling effects ( 52 ).”
BackgroundMori, K., Hashimoto, N., Kamiuchi, N., Yoshida, H., Kobayashi, H., & Yamashita, H. (2021) · Nature Communications · doi:10.1038/s41467-021-24228-z · Cited by 296 · cited 1×
“More advanced, x-ray absorption spectroscopy (XAS), including x-ray absorption near-edge structure (XANES) and extended x-ray absorption spectroscopy fine structure (EXAFS), can provide more accurate chemical bond and atomic coordination information ( 75 ).”
BackgroundScalable Synthesis of High Entropy Alloy Nanoparticles by Microwave Heating
Qiao, H., Saray, M. T., Wang, X., Xu, S., Chen, G., Huang, Z., Chen, C., Zhong, G., Dong, Q., Hong, M., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c05113 · Cited by 292
Extreme mixing in nanoscale transition metal alloys
Yao, Y., Huang, Z., Hughes, L. A., Gao, J., Li, T., Morris, D., Zeltmann, S. E., Savitzky, B. H., Ophus, C., Finfrock, Y. Z., et al. (2021) · Matter · doi:10.1016/j.matt.2021.04.014 · Cited by 276 · cited 1×
“Moreover, the formation of the alloy phase can also be proved by the Fourier-transformed extended x-ray absorption fine structure (FT-EXAFS), mainly reflected by the shifted positions of metal-metal bonds in HEAs relative to the corresponding pure metals ( 69 ).”
BackgroundSelf-citationMesoporous multimetallic nanospheres with exposed highly entropic alloy sites
Kang, Y., Cretu, O., Kikkawa, J., Kimoto, K., Nara, H., Nugraha, A. S., Kawamoto, H., Eguchi, M., Liao, T., Sun, Z., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39157-2 · Cited by 271
Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis
Lin, F., Li, M., Zeng, L., Luo, M., & Guo, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00382 · Cited by 257 · cited 3×
“Compared with the traditional solid solution alloy nanocrystals, intermetallic nanocrystals with long-range ordered structures and well-defined compositions can exhibit robust structural properties in electrocatalysis due to the strong atomic interaction ( 107 ).”
BackgroundInfluentialSelf-citationChen, H., Lin, W., Zhang, Z., Jie, K., Mullins, D. R., Sang, X., Yang, S.-Z., Jafta, C. J., Bridges, C. A., Hu, X., et al. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00064 · Cited by 254
Liu, M., Zhang, Z., Okejiri, F., Yang, S., Zhou, S., & Dai, S. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900015 · Cited by 244
Jin, Z., Lyu, J., Zhao, Y.-L., Li, H., Lin, X., Xie, G., Liu, X., Kai, J.-J., & Qiu, H.-J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00434 · Cited by 244 · cited 1×
“In this respect, several HEA nanowires were synthesized by treating Al-rich nanowires with alkaline solutions to selectively remove most aluminum, such as AlNiCoRuMo and NiPtPdRhIrAl ( 97 , 98 ).”
MethodHigh‐Entropy Alloy Aerogels: A New Platform for Carbon Dioxide Reduction
Li, H., Huang, H., Chen, Y., Lai, F., Fu, H., Zhang, L., Zhang, N., Bai, S., & Liu, T. (2023) · Advanced Materials · doi:10.1002/adma.202209242 · Cited by 242 · cited 6×
“PdcuAuAgBiin aerogels cO 2 RR 0.5 M KHcO 3 200 mA cm − 2 @ − 2.0 v RHe no attenuation after 3,600 s at − 0.8 v RHe ( 39 ) AuAgPtPdcu nanoparticles cO 2 RR 0.5 M K 2 SO 4 10.15 mA cm − 2 @ − 0.8 v RHe no attenuation after 1,000 s at − 0.9 v RHe ( 145 ) the electronic structure can be adjusted in a…”
BackgroundMethodInfluentialHe, L., Li, M., Qiu, L., Geng, S., Liu, Y., Tian, F., Luo, M., Liu, H., Yu, Y., Yang, W., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45874-z · Cited by 240
Self-citationA kinetic descriptor for the electrolyte effect on the oxygen reduction kinetics on Pt(111)
Luo, M., & Koper, M. T. M. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00810-6 · Cited by 232 · cited 2×
“Taking the PtRhMoIr-CoRuFeNiMnCr ultrathin nanowires as an example, the sequential reduction mechanism of HEA nanowires was revealed by regulating the feeding of molybdenum hexacarbonyl [Mo(CO) 6 ], glucose, dodecyl trimethyl ammonium chloride (DTAC), and oleylamine (Fig.”
BackgroundMethodSelf-citationHigh-Entropy Alloy Nanosheets for Fine-Tuning Hydrogen Evolution
Fu, X., Zhang, J., Zhan, S., Xia, F., Wang, C., Ma, D., Yue, Q., Wu, J., & Kang, Y. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c02778 · Cited by 220 · cited 4×
“Furthermore, the computer-facilitated screening predicted the optimal H * binding energy on PdMoGaInNi, which can be further realized via experimental results where PdMoGaInNi showed the most excellent HER performance among various cata-lysts with different prerequisites ( 93 ).”
BackgroundMethodInfluentialMesoporous PdAg Nanospheres for Stable Electrochemical CO2 Reduction to Formate
Zhou, Y., Zhou, R., Zhu, X., Han, N., Song, B., Liu, T., Hu, G., Li, Y., Lu, J., & Li, Y. (2020) · Advanced Materials · doi:10.1002/adma.202000992 · Cited by 216 · cited 1×
“…CO 2 RR process by optimizing the adsorption energy of the key reaction intermediates of CO 2 RR. Pd-based electrocatalysts have shown high selectivity toward HCOOH and CO during CO 2 RR electrocatalysis, while the promotion of CO tolerance and the inhibition of HER are still very urgent ( 147 ).”
BackgroundZhang, D., Shi, Y., Zhao, H., Qi, W., Chen, X., Zhan, T., Li, S., Yang, B., Sun, M., Lai, J., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta10574k · Cited by 215 · cited 1×
“This mechanism can also be observed in the PdFeCoNiCu HEA system ( 50 ).”
BackgroundMovable type printing method to synthesize high-entropy single-atom catalysts
Rao, P., Deng, Y., Fan, W., Luo, J., Deng, P., Li, J., Shen, Y., & Tian, X. (2022) · Nature Communications · doi:10.1038/s41467-022-32850-8 · Cited by 209 · cited 3×
“Furthermore, to maximize atomic utilizations, the HEA concept has been developed into multimetallic single-atom catalyst systems via a modified movable type printing method ( 54 ).”
BackgroundMethodSelf-citationFang, Y., Luan, D., Gao, S., & Lou, X. W. (. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104401 · Cited by 206 · cited 1×
“To further enhance the electrocatalytic activities, a feasible strategy is to design anisotropic morphology, which can not only maximize the number of active sites but also improve the catalytic activity of a single catalytic site through possible ligand/strain effect ( 91 ).”
BackgroundJia, Z., Nomoto, K., Wang, Q., Kong, C., Sun, L., Zhang, L., Liang, S., Lu, J., & Kruzic, J. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101586 · Cited by 203 · cited 1×
“In addition, HEMG ribbon can provide a mechanically strong and flexible substrate to adjust nanoporous and multiphase surface structures ( 114 ).”
BackgroundMinamihara, H., Kusada, K., Wu, D., Yamamoto, T., Toriyama, T., Matsumura, S., Kumara, L. S. R., Ohara, K., Sakata, O., Kawaguchi, S., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c02755 · Cited by 203 · cited 3×
“5, B and C) ( 33 , 34 ).”
MethodInfluentialLow‐Dimensional Metallic Nanomaterials for Advanced Electrocatalysis
Xu, H., Shang, H., Wang, C., & Du, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006317 · Cited by 195 · cited 1×
“At present, the dominant way to address this challenge is to introduce appropriate capping agents into mild wet-chemical methods, greatly reducing the formation energy of alloys to promote the growth along specific crystalline orientations ( 92 ).”
BackgroundChen, T., Qiu, C., Zhang, X., Wang, H., Song, J., Zhang, K., Yang, T., Zuo, Y., Yang, Y., Gao, C., et al. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.3c12649 · Cited by 192 · cited 2×
“An inevitable problem is the bulk and phase-separation structures caused by high-temperature treatment ( 116 – 118 ).”
BackgroundInter‐relationships between Oxygen Evolution and Iridium Dissolution Mechanisms
Lončar, A., Escalera‐López, D., Cherevko, S., & Hodnik, N. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202114437 · Cited by 190 · cited 3×
“To obtain clean hydrogen energy, water electrolysis technologies are found to be one of the most high-efficient and eco-friendly ones for producing hydrogen fuels under mild conditions and powered by renewable energy ( 7 , 8 ).”
BackgroundA general approach to high-entropy metallic nanowire electrocatalysts
Sun, Y., Zhang, W., Zhang, Q., Li, Y., Gu, L., & Guo, S. (2023) · Matter · doi:10.1016/j.matt.2022.09.023 · Cited by 182 · cited 5×
“In this case, the tailorable active sites of multiple elements adjacent to each other allow HEAs to generate more unique properties in HOR electrocatalysis ( 36 , 72 , 142 ).”
BackgroundInfluentialSelf-citationMulti-principal elemental intermetallic nanoparticles synthesized via a disorder-to-order transition
Cui, M., Yang, C., Hwang, S., Yang, M., Overa, S., Dong, Q., Yao, Y., Brozena, A. H., Cullen, D. A., Chi, M., et al. (2022) · Science Advances · doi:10.1126/sciadv.abm4322 · Cited by 176
Wei, M., Sun, Y., Zhang, J., Ai, F., Xi, S., & Wang, J. (2023) · Energy & Environmental Science · doi:10.1039/d3ee01929b · Cited by 176 · cited 3×
“To this end, the PtMoPdRhNi HEA nanocrystals with strong d-d electron interaction can be rationally designed to achieve high-efficiency HER electrocatalysis ( 64 ).”
BackgroundMethodLi, H., Sun, M., Pan, Y., Xiong, J., Du, H., Yu, Y., Feng, S., Li, Z., Lai, J., Huang, B., et al. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.121431 · Cited by 175 · cited 1×
“Several HEAs with special morphologies have been successfully synthesized recently by controlling metals’ growth orientation by adjusting the reaction conditions ( 62 , 67 , 93 – 95 ).”
MethodShort‐Range Diffusion Enables General Synthesis of Medium‐Entropy Alloy Aerogels
Han, G., Li, M., Liu, H., Zhang, W., He, L., Tian, F., Liu, Y., Yu, Y., Yang, W., & Guo, S. (2022) · Advanced Materials · doi:10.1002/adma.202202943 · Cited by 175 · cited 1×
“6C) ( 104 ).”
Self-citationOptimization strategies of high-entropy alloys for electrocatalytic applications
Xiao, L., Wang, Z., & Guan, J. (2023) · Chemical Science · doi:10.1039/d3sc04962k · Cited by 173 · cited 1×
“The high-entropy and sluggish diffusion effects of HEAs make it tend to form a single solid solution phase, which makes it difficult to generate the potential difference between multiple phases to improve the corrosion resistance ( 135 ).”
BackgroundContinuous Synthesis of Hollow High‐Entropy Nanoparticles for Energy and Catalysis Applications
Wang, X., Dong, Q., Qiao, H., Huang, Z., Saray, M. T., Zhong, G., Lin, Z., Cui, M., Brozena, A., Hong, M., et al. (2020) · Advanced Materials · doi:10.1002/adma.202002853 · Cited by 172 · cited 1×
“Reproduced with permission from elsevier ( 84 ). continuous “droplet- to-particle” method ( 81 – 83 ).”
MethodFeng, G., Ning, F., Pan, Y., Chen, T., song, J., Wang, Y., Zou, R., Su, D., & Xia, D. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c00868 · Cited by 172 · cited 6×
“9A) ( 40 ).”
BackgroundMethodInfluentialMaulana, A. L., Chen, P., Shi, Z., Yang, Y., Lizandara‐Pueyo, C., Seeler, F., Abruña, H. D., Muller, D. A., Schierle‐Arndt, K., & Yang, P. (2023) · Nano Letters · doi:10.1021/acs.nanolett.3c01831 · Cited by 172 · cited 2×
“In terms of OER electrocatalysis, another key half-reaction of water electrolyzers, the most widely accepted catalysts are Ir and Ir-based materials ( 7 , 74 ).”
BackgroundSub‐Monolayer YOx/MoOx on Ultrathin Pt Nanowires Boosts Alcohol Oxidation Electrocatalysis
Li, M., Zhao, Z., Zhang, W., Luo, M., Tao, L., Sun, Y., Xia, Z., Chao, Y., Yin, K., Zhang, Q., et al. (2021) · Advanced Materials · doi:10.1002/adma.202103762 · Cited by 167 · cited 2×
“Compared with 0D nanomaterials, anisotropic nanostructures can provide multiple anchoring points toward supports, thus exhibiting many unique properties to realize high electrocatalytic performance, such as enhanced electron and mass transport, as well as improved chemical stability ( 59 ).”
BackgroundSelf-citationYang, C., Gao, Y. X., Ma, T., Bai, M., He, C., Ren, X., Luo, X., Wu, C., Li, S., & Cheng, C. (2023) · Advanced Materials · doi:10.1002/adma.202301836 · Cited by 167
Zhan, C., Bu, L., Sun, H., Huang, X., Zhu, Z., Yang, T., Ma, H., Li, L., Wang, Y., Geng, H., et al. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202213783 · Cited by 166 · cited 4×
“Most HEAs show a single-phase structure, while a minority of them exhibit biphasic structures, showing additional diffraction patterns ( 65 – 67 ).”
BackgroundMethodInfluentialSelf-citationZhu, G., Jiang, Y. Y., Yang, H., Wang, H., Fang, Y., Wang, L., Xie, M., Qiu, P., & Luo, W. D. (2022) · Advanced Materials · doi:10.1002/adma.202110128 · Cited by 164
Wang, Y., Gong, N., Liu, H., Ma, W., Hippalgaonkar, K., Liu, Z., & Huang, Y. (2023) · Advanced Materials · doi:10.1002/adma.202302067 · Cited by 161 · cited 1×
“An inevitable problem is the bulk and phase-separation structures caused by high-temperature treatment ( 116 – 118 ).”
BackgroundSingle-phase high-entropy intermetallic compounds (HEICs): bridging high-entropy alloys and ceramics
Zhou, N., Jiang, S., Huang, T., Qin, M., Hu, T., & Luo, J. (2019) · 中国科学通报:英文版 · doi:10.1016/j.scib.2019.05.007 · Cited by 160 · cited 1×
“7A) ( 108 , 109 ).”
Zhang, X., Yang, Y., Liu, Y., Jia, Z., Wang, Q., Sun, L., Zhang, L., Kruzic, J. J., Lü, J., & Shen, B. (2023) · Advanced Materials · doi:10.1002/adma.202303439 · Cited by 149 · cited 2×
“Recently, tremendous research progress has been made in using amorphous features such as high chemical homogeneity and atomic diffusivity to enable the fabrication of HEMGs ( 110 , 113 ).”
BackgroundTwelve-Component Free-Standing Nanoporous High-Entropy Alloys for Multifunctional Electrocatalysis
Yu, T., Zhang, Y., Hu, Y., Hu, K., Lin, X., Xie, G., Liu, X., Reddy, K. M., Ito, Y., & Qiu, H.-J. (2022) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00762 · Cited by 142
High‐entropy alloy stabilized and activated Pt clusters for highly efficient electrocatalysis
Shi, W., Liu, H., Li, Z., Li, C., Zhou, J., Yuan, Y., Jiang, F., Fu, (. K., & Yao, Y. (2022) · SusMat · doi:10.1002/sus2.56 · Cited by 142 · cited 1×
“To demonstrate the advantages of HEAs as stable catalysts, nonnoble metal-based HEA nanoparticles (FeCoNiCu) were designed to stabilize Pt sites (HEA@Pt) ( 136 ).”
MethodPromoting ordering degree of intermetallic fuel cell catalysts by low-melting-point metal doping
Shao, R., Xu, X., Zhou, Z., Zeng, W.-J., Song, T., Yin, P., Li, A., Ma, C., Tong, L., Kong, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-41590-2 · Cited by 142 · cited 1×
“With the rapid development of nanotechnology, electrocatalytic activities of these catalysts have been substantially boosted by engineering geometric and electronic structures, including doping engineering ( 14 ) and interface engineering ( 15 ).”
BackgroundMen, Y., Wu, D., Hu, Y., Li, L., Li, P., Jia, S., Wang, J., Cheng, G., Chen, S., & Luo, W. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202217976 · Cited by 139 · cited 2×
“In this case, the tailorable active sites of multiple elements adjacent to each other allow HEAs to generate more unique properties in HOR electrocatalysis ( 36 , 72 , 142 ).”
BackgroundSelf-citationHigh-entropy-alloy nanoparticles with 21 ultra-mixed elements for efficient photothermal conversion
Liao, Y., Li, Y., Zhao, R., Zhang, J., Zhao, L., Ji, L., Zhang, Z., Liu, X., Qin, G. W., & Zhang, X. (2022) · National Science Review · doi:10.1093/nsr/nwac041 · Cited by 137 · cited 2×
“The atomic-scale high-angle annular dark-field STEM-EDS (HAADF- STEM-EDS) can be used especially for the more accurate observation of the atomic distributions of elements ( 70 ).”
BackgroundMethodSelf-citationChen, Z., Gariepy, Z., Chen, L., Yao, X., Anand, A., Liu, S.-J., Feugmo, C. G. T., Tamblyn, I., & Singh, C. V. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c03675 · Cited by 136
Nanoscale high-entropy alloy for electrocatalysis
Han, X., Wu, G., Zhao, S., Guo, J., Yan, M., Hong, X., & Wang, D. S. (2023) · Matter · doi:10.1016/j.matt.2023.03.034 · Cited by 128 · cited 1×
“Continuous adjustment of component distribution makes it possible to break the barrier of traditional binary or ternary alloys, providing adsorption/desorption energy toward reaction intermediates closer to the optimal value ( 24 – 26 ).”
BackgroundA Monolayer High‐Entropy Layered Hydroxide Frame for Efficient Oxygen Evolution Reaction
Ding, Y., Wang, Z., Liang, Z., Sun, X., Sun, Z., Zhao, Y., Liu, J., Wang, C., Zeng, Z., Fu, L., et al. (2023) · Advanced Materials · doi:10.1002/adma.202302860 · Cited by 127 · cited 1×
“The diversity of composition and structure in HEAs allows the continuous regulation of the catalyst surface electronic structures, which is beneficial to breaking the scaling relationships for electrocatalysis, surpassing the long-established not too strong or too weak guidance ( 125 – 127 ).”
BackgroundMao, Q., Mu, X., Deng, K., Yu, H., Wang, Z., Xu, Y., Li, X., Wang, L., & Wang, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202304963 · Cited by 127 · cited 2×
“With the further reduction and diffusion of other metal atoms, a series of PdMo-based HEA nanosheets were successfully constructed, thus extending ultrathin nanosheet morphology into HEA systems ( 51 , 64 , 93 ).”
BackgroundMethodSynthesis of monodisperse high entropy alloy nanocatalysts from core@shell nanoparticles
Chen, Y., Zhan, X., Bueno, S. L. A., Shafei, I. H., Ashberry, H. M., Chatterjee, K., Xu, L., Tang, Y., & Skrabalak, S. E. (2021) · Nanoscale Horizons · doi:10.1039/d0nh00656d · Cited by 122 · cited 1×
“Using intermetallic PdCu nanoparticles as seeds, PdCu/PtNiCo core/shell nanoparticles were first synthesized and then were annealed to induce the atomic mixing of metals to form PdCuPtNiCo HEA nanoparticles ( 88 ).”
MethodWang, Y., Luo, W., Gong, S., Luo, L., Li, Y., Zhao, Y., & Li, Z. (2023) · Advanced Materials · doi:10.1002/adma.202302499 · Cited by 119 · cited 1×
“To obtain single-phase solid-solution HEAs, it is necessary to control the simultaneous reduction of metal atoms ( 57 , 58 ).”
BackgroundToward controllable and predictable synthesis of high-entropy alloy nanocrystals
Liu, Y.-H., Hsieh, C.-J., Hsu, L.-C., Lin, K.-H., Hsiao, Y.-C., Chi, C.-C., Lin, J.-T., Chang, C.-W., Lin, S.-C., Wu, C.-Y., et al. (2023) · Science Advances · doi:10.1126/sciadv.adf9931 · Cited by 119 · cited 4×
“The number of phases in HEAs is reduced, and as a result, the stable solid-solution phase forming at higher temperatures is feasible ( 19 ).”
BackgroundInfluentialLu, Y., Huang, K., Cao, X., Zhang, L., Wang, T., Peng, D., Zhang, B., Liu, Z., Wu, J., Zhang, Y., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110645 · Cited by 117 · cited 1×
“On the basis of the binary/ternary parent intermetallics, HEIs, whose partial atomic substitution mainly originated from the specific sites of the binary counterparts, have been successfully designed to construct ideal catalytic active sites ( 37 , 40 , 115 – 118 ).”
BackgroundHigh entropy materials for catalysis: A critical review of fundamental concepts and applications
Deng, C., Wang, T., Wu, P., Zhu, W., & Dai, S. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.109153 · Cited by 117 · cited 1×
“The lattice distortion effect not only optimizes the hardness, electrical, and thermal conductivity of HEAs but also dramatically improves their chemical properties ( 44 – 46 ).”
BackgroundLv, Y., Lin, L., Xue, R., Zhang, P., Ma, F., Gan, T., Zhang, J., Gao, D., Zheng, X., Wang, L., et al. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202304515 · Cited by 116
Chida, Y., Tomimori, T., Ebata, T., Taguchi, N., Ioroi, T., Hayashi, K., Todoroki, N., & Wadayama, T. (2023) · Nature Communications · doi:10.1038/s41467-023-40246-5 · Cited by 111
Amorphous alloys for electrocatalysis: The significant role of the amorphous alloy structure
Li, X., Cai, W., Li, D., Xu, J., Tao, H. B., & Liu, B. (2021) · Nano Research · doi:10.1007/s12274-021-3682-7 · Cited by 109 · cited 1×
“In this respect, the long-range disordered atomic structure, isotropy, and metastability are the key properties of the HEMGs, rendering them with exciting electrocatalytic performance ( 105 , 106 ).”
BackgroundFlash‐Thermal Shock Synthesis of High‐Entropy Alloys Toward High‐Performance Water Splitting
Cha, J., Cho, S., Kim, D., Jeon, D., Park, S., Jung, J., Kim, I., & Choi, S. (2023) · Advanced Materials · doi:10.1002/adma.202305222 · Cited by 105 · cited 1×
“Recently, using the carbon nanofibers as the supports, HEA nanoparticles were synthesized by the millisecond-scale light-assisted flash-thermal shock, featuring the advantages of ambient air, large area, and remote ( 78 ).”
MethodGrowing anisotropic crystals at the nanoscale
Liz‐Marzán, L. M., & Grzelczak, M. (2017) · Science · doi:10.1126/science.aam8774 · Cited by 104 · cited 1×
“However, metals tend to form Wulff polyhedrons to minimize the surface energy of a specific facet; thereby, the intrinsically nonlayered metals and binary/ternary alloys have difficulty of spontaneously forming these anisotropic structures, let alone HEAs containing so many metal elements ( 60 ).”
BackgroundA review on the rational design and fabrication of nanosized high-entropy materials
Zhou, Y., Shen, X., Qian, T., Yan, C., & Lu, J. (2023) · Nano Research · doi:10.1007/s12274-023-5419-2 · Cited by 104
Ma, J., Xing, F., Nakaya, Y., Shimizu, K., & Furukawa, S. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200889 · Cited by 102 · cited 1×
“Note that the interconversion between HEMGs and HEIs occurs when the specific conditions are met, such as temperature, stoichiometry, and atom binding environment ( 110 – 112 ).”
BackgroundYu, Y., Xia, F., Wang, C., Wu, J., Fu, X., Ma, D., Lin, B., Wang, J., Yue, Q., & Kang, Y. (2022) · Nano Research · doi:10.1007/s12274-022-4432-1 · Cited by 101 · cited 1×
“The similar enhancement of ORR performance can also be experimentally observed on various emerging HEAs ( 38 , 40 , 54 , 103 , 140 ).”
BackgroundBueno, S. L. A., Leonardi, A., Kar, N., Chatterjee, K., Zhan, X., Chen, C., Wang, Z., Engel, M., Fung, V., & Skrabalak, S. E. (2022) · ACS Nano · doi:10.1021/acsnano.2c07787 · Cited by 100 · cited 1×
“Afterward, this strategy was further extended into other quinary (PdCuPtNiM, M = Ir, Rh, Fe, and Ru), senary (PdCuPtNiCoRh), and septenary (PdCuPtNiCoRhIr) HEA systems ( 89 ).”
BackgroundStructural Regulation of Pd‐Based Nanoalloys for Advanced Electrocatalysis
Li, M., Xia, Z., Luo, M., He, L., Tao, L., Yang, W., Yu, Y., & Guo, S. (2021) · Small Science · doi:10.1002/smsc.202100061 · Cited by 93 · cited 2×
“Alloying has provided a promising strategy to regulate the electronic structures of surface or near-surface atoms via a unique strain/ligand effect, thus creating a variety of bimetallic or trimetallic electrocatalysts ( 11 – 13 ).”
BackgroundSelf-citationLiu, H., Jia, R., Qin, C., Yang, Q., Tang, Z., Li, M., & Ma, Z. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202210626 · Cited by 93
Self-citationA Route for Phase Control in Metal Nanoparticles: A Potential Strategy to Create Advanced Materials
Kusada, K., & Kitagawa, H. (2016) · Advanced Materials · doi:10.1002/adma.201502881 · Cited by 91 · cited 1×
“By slowly adding low-concentration metal precursors into a heated reductant solution, immiscible metals can be reduced simultaneously ( 86 ).”
BackgroundContinuous 2000 K droplet-to-particle synthesis
Wang, X., Huang, Z., Yao, Y., Qiao, H., Zhong, G., Pei, Y., Zheng, C., Kline, D., Xia, Q., Lin, Z., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.004 · Cited by 88 · cited 2×
“To simplify the preparation process, a droplet- to-particle aerosol technique combined with a high-temperature ( ~ 2000 K) micro-channel reactor was adopted to overcome the limitations of traditional aerosol spray techniques ( 84 ).”
MethodSmall‐Scale Big Science: From Nano‐ to Atomically Dispersed Catalytic Materials
Wang, L., Liu, H., Zhuang, J., & Wang, D. S. (2022) · Small Science · doi:10.1002/smsc.202200036 · Cited by 88 · cited 1×
“To balance the high surface energy, adjacent nanoparticles will approach each other and agglomerate, resulting in the decline of their overall activity ( 53 ).”
BackgroundZhang, W., Feng, X. Y., Mao, Z. X., Li, J., & Wei, Z. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204110 · Cited by 86 · cited 3×
“However, exerting a certain kind of reaction conditions onto the preparation process is beneficial for driving the reduction potentials of different metals to be in equilibrium ( 102 , 103 ).”
BackgroundMethodSelf-citationHigh-entropy alloy nanopatterns by prescribed metallization of DNA origami templates
Xie, M., Fang, W., Qu, Z., Hu, Y., Zhang, Y., Chao, J., Shi, J., Wang, L., Wang, L., Tian, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37333-y · Cited by 84
Duan, J., Wang, M., Huang, R., Miao, J., Lu, Y., Wang, T., & Li, T. (2022) · Science China Materials · doi:10.1007/s40843-022-2171-5 · Cited by 77 · cited 1×
“Traditionally, HEAs prepared by top-down approach, such as mechanical alloying, high-energy ball milling, laser ablation, and arc melting, are all bulk, greatly losing the surface-active sites ( 27 – 29 ).”
BackgroundCechanaviciutė, I. A., Antony, R. P., Krysiak, O. A., Quast, T., Dieckhöfer, S., Saddeler, S., Telaar, P., Chen, Y., Muhler, M., & Schuhmann, W. W. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202218493 · Cited by 77
Chen, H., Guan, C., & Feng, H. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c02003 · Cited by 76 · cited 1×
“The diversity of composition and structure in HEAs allows the continuous regulation of the catalyst surface electronic structures, which is beneficial to breaking the scaling relationships for electrocatalysis, surpassing the long-established not too strong or too weak guidance ( 125 – 127 ).”
BackgroundHigh‐entropy intermetallics: from alloy design to structural and functional properties
Wang, H., He, Q., & Yang, Y. G. (2022) · Rare Metals · doi:10.1007/s12598-021-01926-7 · Cited by 70 · cited 2×
“7A) ( 108 , 109 ).”
BackgroundKim, M., Batsa Tetteh, E., Krysiak, O. A., Savan, A., Xiao, B., Piotrowiak, T. H., Andronescu, C., Ludwig, A., Dong Chung, T., & Schuhmann, W. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202310069 · Cited by 63
Wang, Y., Yu, B., He, M. H., Zhai, Z., Yin, K., Kong, F., & Zhang, Z. (2021) · Nano Research · doi:10.1007/s12274-021-4059-7 · Cited by 60 · cited 1×
“In this respect, several HEA nanowires were synthesized by treating Al-rich nanowires with alkaline solutions to selectively remove most aluminum, such as AlNiCoRuMo and NiPtPdRhIrAl ( 97 , 98 ).”
MethodMinamihara, H., Kusada, K., Yamamoto, T., Toriyama, T., Murakami, Y., Matsumura, S., Kumara, L. S. R., Sakata, O., Kawaguchi, S., Kubota, Y., et al. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c03713 · Cited by 60
High-Entropy-Alloy Nanocrystal Based Macro- and Mesoporous Materials
Marco, M. L. D., Baaziz, W., Sharna, S., Devred, F., Poleunis, C., Chevillot‐Biraud, A., Nowak, S., Haddad, R., Odziomek, M., Boissière, C., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c05465 · Cited by 55 · cited 2×
“Additionally, Brunauer- Emmett-Teller (BET) and Barrett- Joyner-Halenda (BJH) measurements are very important to determine the specific surface area, pore volume, and pore size distribution of porous HEAs ( 73 ).”
BackgroundLuo, M., Qin, Y., Li, M., Sun, Y., Li, C., Li, Y., Yang, Y., Lv, F., Wu, D., Zhou, P. C., et al. (2019) · 中国科学通报:英文版 · doi:10.1016/j.scib.2019.10.012 · Cited by 54 · cited 1×
“With the rapid development of nanotechnology, electrocatalytic activities of these catalysts have been substantially boosted by engineering geometric and electronic structures, including doping engineering ( 14 ) and interface engineering ( 15 ).”
BackgroundSelf-citationUltradurable Pt-Based Catalysts for Oxygen Reduction Electrocatalysis
Li, Z., Zhou, P., Zhao, Y., Jiang, W., Zhao, B., Chen, X., & Li, M. (2024) · Catalysts · doi:10.3390/catal14010057 · Cited by 50 · cited 1×
“ORR is a key cathodic half-reaction of PEMFCs, while its sluggish kinetics severely hinders the further applications of PEMFCs ( 4 , 137 ).”
BackgroundSelf-citationEnhancing the magnetocaloric response of high-entropy metallic-glass by microstructural control
Yin, H., Law, J. Y., Huang, Y., Shen, H., Jiang, S., Guo, S., Franco, V., & Sun, J. (2021) · Science China Materials · doi:10.1007/s40843-021-1825-1 · Cited by 48
Self-citationLi, M., Luo, M., Xia, Z., Yang, Y., Huang, Y., Wu, D., Sun, Y., Li, C., Chao, Y., Yang, W., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06861a · Cited by 46 · cited 2×
“The metal atoms have different migration rates under high-temperature environments and thus will interdiffuse to facilitate the formation of single-phase alloys ( 87 ).”
BackgroundSelf-citationFollowing Paths of Maximum Catalytic Activity in the Composition Space of High‐Entropy Alloys
Plenge, M. K., Pedersen, J. K., Mints, V. A., Arenz, M., & Rossmeisl, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202962 · Cited by 46 · cited 1×
“In addition, the nudged elastic band model was optimized to reveal the close-knit correlation of the maximum ORR activity and ridges ( 139 ).”
MethodSoliman, S. S., Dey, G. R., McCormick, C. R., & Schaak, R. E. (2023) · ACS Nano · doi:10.1021/acsnano.3c05241 · Cited by 43
Pendergast, A. D., Glasscott, M. W., Renault, C., & Dick, J. E. (2018) · Electrochemistry Communications · doi:10.1016/j.elecom.2018.11.005 · Cited by 40 · cited 1×
“However, the compositional range of the alloyed atoms is limited by the differences of crystal structure, atomic size, electronegativity, and electron concentration between alloyed atoms in metal catalysts ( 16 – 18 ).”
BackgroundHigh-entropy materials go nano
Pacchioni, G. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00429-w · Cited by 37 · cited 1×
“The laser scanning ablation can break the limitation of support materials to obtain more HEAs, because a laser pulse can accurately confine energy in the desired microregions of the supports ( 80 ).”
BackgroundMashing up metals with carbothermal shock
Skrabalak, S. E. (2018) · Science · doi:10.1126/science.aat1471 · Cited by 33 · cited 2×
“For example, by identifying (110), (101), and (211) lattice planes from HRTEM image and FFT patterns, the body-centered cubic (bcc) phase structure of HEA nanoparticles containing 21 elements can be confirmed ( 70 ).”
BackgroundAn, Z., Mao, S., Yang, T., Liu, Y., Chen, Y., Yang, X., Liu, S., Wang, X., Deng, Q., Zhang, Z., et al. (2022) · Science China Materials · doi:10.1007/s40843-022-2045-4 · Cited by 29 · cited 1×
“Originally, the cocktail effect was used to explain the unexpected physicochemical properties ( 48 ).”
Overcoming Immiscibility via a Milliseconds-Long “Shock” Synthesis toward Alloyed Nanoparticles
Yao, Y., Dong, Q., & Hu, L. (2019) · Matter · doi:10.1016/j.matt.2019.11.006 · Cited by 26 · cited 1×
“To obtain single-phase solid-solution HEAs, it is necessary to control the simultaneous reduction of metal atoms ( 57 , 58 ).”
BackgroundEngineering the high-entropy phase of Pt-Au-Cu nanowire for electrocatalytic hydrogen evolution
Yu, Y., Liu, G., Jiang, S., Zhang, R., Deng, H., Stach, E. A., Bao, S., Zeng, Z., & Kang, Y. (2023) · Nano Research · doi:10.1007/s12274-023-5868-7 · Cited by 26
Li, Q., Wei, B., Li, Y., Xu, J., Li, J., Liu, L., & Deepak, F. L. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00372 · Cited by 19
Self-citationChen, C., Guo, J., Liu, J., Li, W., Wei, Y., Wang, H., Zhao, X., & Lü, W. (2023) · Chemical Communications · doi:10.1039/d3cc04162j · Cited by 18 · cited 1×
“The common nonequilibrium syntheses include high-temperature shockwave, laser scanning ablation, and electrical explosion ( 31 , 76 – 79 ).”
Background
Cited by
Size‐Adjustable High‐Entropy Alloy Nanoparticles as an Efficient Platform for Electrocatalysis
Cai, H., Yang, H., He, S., Wan, D. P., Kong, Y., Li, D., Jiang, X., Zhang, X., Hu, Q., & He, C. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202423765 · Cited by 157
Zhang, T., Liu, Q., Bao, H., Wang, M., Wang, N., Zhang, B., & Fan, H. J. (2025) · Nature Communications · doi:10.1038/s41467-025-56189-y · Cited by 103
“6 – 13).”
Wang, Q. S., & Yao, Y. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01579-5 · Cited by 116
Expanding the frontiers of electrocatalysis: advanced theoretical methods for water splitting
Cho, S. C., Seok, J. H., Manh, H. N., Seol, J. H., Lee, C. H., & Lee, S. U. (2025) · Nano Convergence · doi:10.1186/s40580-024-00467-w · Cited by 94
Compressive strain in high-entropy alloy for high-performance acidic oxygen evolution
Zhao, T., Shi, L., Zhang, G., Guo, Y., Li, Y., Wang, J., Kong, S., Zheng, Q., Yang, Y. R., Tan, T., et al. (2025) · Matter · doi:10.1016/j.matt.2025.102091 · Cited by 70
Metadata
- Authors
- Li, M., Lin, F., Zhang, S., Zhao, R., Tao, L., Li, L., Li, J., Zeng, L., Luo, M., & Guo, S.
- Affiliations
- Peking University (CN)
- Corresponding author
- Guo, Shaojun
- ORCID
- Venue
- Science Advances
- Published
- 2024-06-07
- Volume
- 10
- Issue
- 23
- Pages
- eadn2877-eadn2877
- ISSN
- 2375-2548 (ISSN-L)
- PMC
- PMC11152139
- OpenAlex
- W4399376281
- Cited by
- 177
- References
- 149
- Citations by year
- 2026: 84 · 2025: 86 · 2024: 7
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- Science Advances (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- Tencent
- National Natural Science Foundation of China (52303361, 52025133)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Keywords
- high-entropy alloys, electrocatalysts, nanocatalysts, electronic structure, atomic ordering, anisotropic morphology, non-equilibrium synthesis, size effect
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.