High-entropy alloy electrocatalysts go to (sub-)nanoscale
Open accessThe DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.
Abstract
Alloying has proven power to upgrade metallic electrocatalysts, while the traditional alloys encounter limitation for optimizing electronic structures of surface metallic sites in a continuous manner. High-entropy alloys (HEAs) overcome this limitation by manageably tuning the adsorption/desorption energies of reaction intermediates. Recently, the marriage of nanotechnology and HEAs has made considerable progresses for renewable energy technologies, showing two important trends of size diminishment and multidimensionality. This review is dedicated to summarizing recent advances of HEAs that are rationally designed for energy electrocatalysis. We first explain the advantages of HEAs as electrocatalysts from three aspects: high entropy, nanometer, and multidimension. Then, several structural regulation methods are proposed to promote the electrocatalysis of HEAs, involving the thermodynamically nonequilibrium synthesis, regulating the (sub-)nanosize and anisotropic morphologies, as well as engineering the atomic ordering. The general relationship between the electronic structures and electrocatalytic properties of HEAs is further discussed. Finally, we outline remaining challenges of this field, aiming to inspire more sophisticated HEA-based nanocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



![Fig. 4. Synthesis of HEAs by nonequilibrium methods for efficient electrocatalysis. (A) Carbothermal shock strategy and the temporal evolution of temperature during the 55-ms thermal shock of HEA nanoparticles. Reproduced with permission from the American Association for the Advancement of Science (31). (B) Schematic illustration for the formation mechanism of HEA nanoparticles by the laser scanning ablation method [this synthesis involves the sequential processes of (i) pulse penetration, (ii) pulse absorption, (iii) plume expansion, (iv) bubble generation, and (v) bubble collapse]. Reproduced with permission from the Nature Publishing Group (76). (C) Schematic illustration for the droplets transporting through the carbonized wood microchannels heated to 2000 K via the carrier gas and the magnified wood microchannel. (D) EDS elemental mapping images of a 10-element AuCoCuIrPtMnMoNiPdRu HEA nanoparticle (scale bar, 20 nm). Reproduced with permission from Elsevier (84).](https://figures.cochat.ai/paper-figures/7ac8ed05179042db800a243c8ce30af3/high-entropy-alloy-electrocatalysts-go-to-sub-nanoscale-figure-4.jpg)





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550 · cited 1×
“The increasing energy consumption and environmental issues have presented a severe challenge to the sustainable development of human society ( 1 ).”
BackgroundCombining theory and experiment in electrocatalysis: Insights into materials design
Seh, Z. W., Kibsgaard, J., Dickens, C. F., Chorkendorff, I., Nørskov, J. K., & Jaramillo, T. F. (2017) · Science · doi:10.1126/science.aad4998 · Cited by 12,114
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973 · cited 1×
“Considering the total alloy systems, the alloys constituted by more elements may strengthen the entropy driving force ( 41 ).”
BackgroundElectrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885 · cited 1×
“This stimulates the exploration of economical and eco-friendly energy generation, storage, and conversion involving the electrochemical processes ( 2 ).”
BackgroundGeorge, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047 · cited 3×
“Here, the Δ S mix of 1.5 R can be used as the boundary between HEAs and medium-entropy alloys (MEAs) and that of 1.0 R for medium-and low-entropy alloys (LEAs) ( 24 ).”
BackgroundMethodInfluentialMetal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles
Liu, L., & Corma, A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00776 · Cited by 4,777 · cited 1×
“Reducing the size of 0D nanomaterials to subnanoscale, even to single-atom catalysts, can enhance the surface atomic utilization ( 90 ).”
BackgroundMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071 · cited 1×
“Traditionally, HEAs prepared by top-down approach, such as mechanical alloying, high-energy ball milling, laser ablation, and arc melting, are all bulk, greatly losing the surface-active sites ( 27 – 29 ).”
BackgroundSluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366 · cited 1×
“Nevertheless, the sluggish diffusion effect is inconspicuous in traditional alloys, because the local atomic configurations before and after atoms enter vacancies are similar ( 47 ).”
BackgroundCarbothermal shock synthesis of high-entropy-alloy nanoparticles
Yao, Y., Huang, Z., Xie, P., Lacey, S. D., Jacob, R. J., Xie, H., Chen, F., Nie, A., Pu, T., Rehwoldt, M., et al. (2018) · Science · doi:10.1126/science.aan5412 · Cited by 2,101 · cited 6×
“In addition, by breaking through the thermodynamic immisci-bility limit, other shock-type strategies were also developed, including the fast-moving bed pyrolysis, microwave heating method, and ( 31 ).”
BackgroundMethodInfluentialSelf-citation
Cited by
Size‐Adjustable High‐Entropy Alloy Nanoparticles as an Efficient Platform for Electrocatalysis
Cai, H., Yang, H., He, S., Wan, D. P., Kong, Y., Li, D., Jiang, X., Zhang, X., Hu, Q., & He, C. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202423765 · Cited by 157
Zhang, T., Liu, Q., Bao, H., Wang, M., Wang, N., Zhang, B., & Fan, H. J. (2025) · Nature Communications · doi:10.1038/s41467-025-56189-y · Cited by 103
“6 – 13).”
Wang, Q. S., & Yao, Y. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01579-5 · Cited by 116
Expanding the frontiers of electrocatalysis: advanced theoretical methods for water splitting
Cho, S. C., Seok, J. H., Manh, H. N., Seol, J. H., Lee, C. H., & Lee, S. U. (2025) · Nano Convergence · doi:10.1186/s40580-024-00467-w · Cited by 94
Compressive strain in high-entropy alloy for high-performance acidic oxygen evolution
Zhao, T., Shi, L., Zhang, G., Guo, Y., Li, Y., Wang, J., Kong, S., Zheng, Q., Yang, Y. R., Tan, T., et al. (2025) · Matter · doi:10.1016/j.matt.2025.102091 · Cited by 70
Metadata
- Authors
- Li, M., Lin, F., Zhang, S., Zhao, R., Tao, L., Li, L., Li, J., Zeng, L., Luo, M., & Guo, S.
- Affiliations
- Peking University (CN)
- Corresponding author
- Guo, Shaojun
- ORCID
- Venue
- Science Advances
- Published
- 2024-06-07
- Volume
- 10
- Issue
- 23
- Pages
- eadn2877-eadn2877
- ISSN
- 2375-2548 (ISSN-L)
- PMC
- PMC11152139
- OpenAlex
- W4399376281
- Cited by
- 177
- References
- 149
- Citations by year
- 2026: 84 · 2025: 86 · 2024: 7
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- Science Advances (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- Tencent
- National Natural Science Foundation of China (52303361, 52025133)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
- Keywords
- high-entropy alloys, electrocatalysts, nanocatalysts, electronic structure, atomic ordering, anisotropic morphology, non-equilibrium synthesis, size effect
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.