The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Solid-state batteries: The critical role of mechanics
Open accessAbstract
Solid-state batteries with lithium metal anodes have the potential for higher energy density, longer lifetime, wider operating temperature, and increased safety. Although the bulk of the research has focused on improving transport kinetics and electrochemical stability of the materials and interfaces, there are also critical challenges that require investigation of the mechanics of materials. In batteries with solid-solid interfaces, mechanical contacts, and the development of stresses during operation of the solid-state batteries, become as critical as the electrochemical stability to keep steady charge transfer at these interfaces. This review will focus on stress and strain that result from normal and extended battery cycling and the associated mechanisms for stress relief, some of which lead to failure of these batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
A microbend test method for measuring the plasticity length scale
Stölken, J. S., & Evans, A. G. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00153-0 · Cited by 1,704
Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes
Porz, L., Swamy, T., Sheldon, B. W., Rettenwander, D., Frömling, T., Thaman, H. L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701003 · Cited by 1,117
Thin-film lithium and lithium-ion batteries
Bates, J. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00327-1 · Cited by 1,092
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Sharafi, A., Kazyak, E., Davis, A. L., Yu, S., Thompson, T., Siegel, D. J., Dasgupta, N. P., & Sakamoto, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03002 · Cited by 844
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Self-citationIntergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte
Cheng, E. J., Sharafi, A., & Sakamoto, J. S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.018 · Cited by 708
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes
Hobold, G. M., Lopez, J., Guo, R., Minafra, N., Banerjee, A., Shirley Meng, Y., Shao-Horn, Y., & Gallant, B. M. (2021) · Nature Energy · doi:10.1038/s41560-021-00910-w · Cited by 547
Challenges in Lithium Metal Anodes for Solid-State Batteries
Hatzell, K. B., Chen, X. C., Cobb, C. L., Dasgupta, N. P., Dixit, M. B., Marbella, L. E., McDowell, M. T., Mukherjee, P. P., Verma, A., Viswanathan, V., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02668 · Cited by 523
Self-citationChallenges for and Pathways toward Li-Metal-Based All-Solid-State Batteries
Albertus, P., Anandan, V., Ban, C., Balsara, N., Belharouak, I., Buettner-Garrett, J., Chen, Z., Daniel, C., Doeff, M., Dudney, N. J., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00445 · Cited by 480
Self-citationLocal electronic structure variation resulting in Li ‘filament’ formation within solid electrolytes
Liu, X., Garcia-Mendez, R., Lupini, A. R., Cheng, Y., Hood, Z. D., Han, F., Sharafi, A., Idrobo, J. C., Dudney, N. J., Wang, C., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01019-x · Cited by 474
Self-citationLithium-Metal Growth Kinetics on LLZO Garnet-Type Solid Electrolytes
Krauskopf, T., Dippel, R., Hartmann, H., Peppler, K., Mogwitz, B., Richter, F. H., Zeier, W. G., & Janek, J. (2019) · Joule · doi:10.1016/j.joule.2019.06.013 · Cited by 463
Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells
Ning, Z., Spencer-Jolly, D., Li, G., Meyere, R. M. G. D., Pu, S. D., Chen, Y., Kasemchainan, J., Ihli, J., Chen, G., Liu, B., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-00967-8 · Cited by 457
Lewis, J. A., Cortes, F. J. Q., Liu, Y., Miers, J. C., Verma, A., Vishnugopi, B. S., Tippens, J., Prakash, D., Marchese, T. S., Han, S. Y., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00903-2 · Cited by 444
Singer, A., Zhang, M., Hy, S., Cela, D., Fang, C., Wynn, T. A., Qiu, B., Xia, Y., Liu, Z., Ulvestad, A., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0184-2 · Cited by 423
Miller, D. J., Proff, C., Wen, J., Abraham, D. P., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300015 · Cited by 422
Elastic, plastic, and creep mechanical properties of lithium metal
Masias, A. G., Felten, N., García-Méndez, R., et al. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2971-3 · Cited by 392
Zhang, L., Yang, T., Du, C., Liu, Q., Tang, Y., Zhao, J., Wang, B., Chen, T., Sun, Y., Jia, P., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-019-0604-x · Cited by 375
Shen, F., Dixit, M. B., Xiao, X., & Hatzell, K. B. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00249 · Cited by 374
Lithium Mechanics: Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries
LePage, W. S., Chen, Y., Kazyak, E., Chen, K.-H., Sanchez, A. J., Poli, A., Arruda, E. M., Thouless, M. D., & Dasgupta, N. P. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0221902jes · Cited by 334
Simple and accurate model of fracture toughness of solids
Niu, H., Niu, S., & Oganov, A. R. (2019) · Journal of Applied Physics · doi:10.1063/1.5066311 · Cited by 306
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
Wang, M. J., Kazyak, E., Dasgupta, N. P., et al. (2021) · Joule · doi:10.1016/j.joule.2021.04.001 · Cited by 234
Swamy, T., Park, R., Sheldon, B. W., Rettenwander, D., Porz, L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y.-M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1391814jes · Cited by 227
Effect of microcracking on ionic conductivity in LATP
Jackman, S. D., & Cutler, R. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.081 · Cited by 217
Mechanical properties of metallic lithium: from nano to bulk scales
Fincher, C. D., Ojeda, D., Zhang, Y., Pharr, G. M., & Pharr, M. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.036 · Cited by 187
Dislocation-toughened ceramics
Porz, L., Klomp, A. J., Fang, X., Li, N., Yildirim, C., Detlefs, C., Bruder, E., Höfling, M., Rheinheimer, W., Patterson, E. A., et al. (2021) · Materials Horizons · doi:10.1039/d0mh02033h · Cited by 175
Mechanical characterization of LiPON films using nanoindentation
Herbert, E. G., Tenhaeff, W. E., Dudney, N. J., & Pharr, G. M. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.07.068 · Cited by 163
Self-citationMechanical properties of the solid Li-ion conducting electrolyte: Li0.33La0.57TiO3
Cho, Y., Wolfenstine, J., Rangasamy, E., Kim, H., Choe, H., & Sakamoto, J. S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6500-5 · Cited by 143
Design principles for zero-strain Li-ion cathodes
Zhao, X., Tian, Y., Lun, Z., Cai, Z., Chen, T., Ouyang, B., & Ceder, G. (2022) · Joule · doi:10.1016/j.joule.2022.05.018 · Cited by 114
Rouxel, T., Jang, J., & Ramamurty, U. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100834 · Cited by 113
Strauss, F., de Biasi, L., Kim, A., Hertle, J., Schweidler, S., Janek, J., Hartmann, P., & Brezesinski, T. (2019) · ACS Materials Letters · doi:10.1021/acsmaterialslett.9b00441 · Cited by 111
Emerging Role of Non-crystalline Electrolytes in Solid-State Battery Research
Grady, Z. M., Wilkinson, C. J., Randall, C. A., & Mauro, J. C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00218 · Cited by 100
Barroso-Luque, L., Tu, Q. H., & Ceder, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6c5b · Cited by 83
The Role of Local Inhomogeneities on Dendrite Growth in LLZO-Based Solid Electrolytes
Barai, P., Ngo, A. T., Narayanan, B., Higa, K., Curtiss, L. A., & Srinivasan, V. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9b08 · Cited by 78
de Vasconcelos, L. S., Sharma, N., Xu, R., & Zhao, K. (2018) · Experimental Mechanics · doi:10.1007/s11340-018-00451-6 · Cited by 72
Microstructure and mechanical properties of Li0.33La0.567TiO3
Schell, K. G., Lemke, F., Bucharsky, E. C., Hintennach, A., & Hoffmann, M. J. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0516-1 · Cited by 47
Herbert, E. G., Dudney, N. J., Rochow, M. F., Thole, V., & Hackney, S. A. (2019) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2019.313 · Cited by 42
Self-citationMorphology-Safety Implications of Interfacial Evolution in Lithium Metal Anodes
Vishnugopi, B. S., Verma, A., & Mukherjee, P. P. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c03269 · Cited by 23
Research works printed but not linked: 35
- 10.1016/j.matt.2020.02.008 · doi:10.1016/j.matt.2020.02.008
- 10.1016/j.jpowsour.2017.01.037 · doi:10.1016/j.jpowsour.2017.01.037
- 10.1021/acsaem.9b01503 · doi:10.1021/acsaem.9b01503
- 10.1021/acsami.0c12248 · doi:10.1021/acsami.0c12248
- 10.1021/acsami.9b02537 · doi:10.1021/acsami.9b02537
- 10.1016/j.joule.2019.06.017 · doi:10.1016/j.joule.2019.06.017
- 10.1021/acsaem.9b01685 · doi:10.1021/acsaem.9b01685
- 10.1021/acs.jpcc.8b06355 · doi:10.1021/acs.jpcc.8b06355
- 10.1557/jmr.2018.85 · doi:10.1557/jmr.2018.85
- 10.1103/PhysRevLett.103.155501 · doi:10.1103/physrevlett.103.155501
- 10.1021/acs.nanolett.1c01910 · doi:10.1021/acs.nanolett.1c01910
- 10.1149/1945-7111/ab75c1 · doi:10.1149/1945-7111/ab75c1
- 10.1149/2.0321910jes · doi:10.1149/2.0321910jes
- 10.1016/j.matlet.2013.01.021 · doi:10.1016/j.matlet.2013.01.021
- 10.1002/adem.201400071 · doi:10.1002/adem.201400071
- 10.1111/jace.14084 · doi:10.1111/jace.14084
- 10.1016/j.jeurceramsoc.2018.02.032 · doi:10.1016/j.jeurceramsoc.2018.02.032
- 10.1016/j.jeurceramsoc.2020.03.028 · doi:10.1016/j.jeurceramsoc.2020.03.028
- 10.1002/aenm.201602011 · doi:10.1002/aenm.201602011
- 10.1002/aenm.201200107 · doi:10.1002/aenm.201200107
- 10.3390/ma10040403 · doi:10.3390/ma10040403
- 10.1126/sciadv.aaw5519 · doi:10.1126/sciadv.aaw5519
- 10.1557/s43578-020-00098-x · doi:10.1557/s43578-020-00098-x
- 10.1016/0022-3093(79)90154-6 · doi:10.1016/0022-3093(79)90154-6
- 10.1016/S0022-3093(99)00348-8 · doi:10.1016/s0022-3093(99)00348-8
- 10.1103/PhysRevLett.100.225501 · doi:10.1103/physrevlett.100.225501
- 10.1111/j.1151-2916.2002.tb00590.x · doi:10.1111/j.1151-2916.2002.tb00590.x
- 10.1016/j.xcrp.2022.100845 · doi:10.1016/j.xcrp.2022.100845
- 10.1016/j.jpowsour.2020.228595 · doi:10.1016/j.jpowsour.2020.228595
- 10.1016/j.jpowsour.2021.230831 · doi:10.1016/j.jpowsour.2021.230831
- 10.1016/0167-2738(81)90244-7 · doi:10.1016/0167-2738(81)90244-7
- 10.1007/BF01145497 · doi:10.1007/bf01145497
- 10.1002/eem2.12261 · doi:10.1002/eem2.12261
- 10.1016/j.matt.2021.08.004 · doi:10.1016/j.matt.2021.08.004
- 10.1016/j.matt.2021.04.016 · DOI
Cited by
Thangarasu, S., Bhosale, M., Palanisamy, G., & Oh, T. H. (2024) · Gels · doi:10.3390/gels10090558 · Cited by 2
Metadata
- Authors
- Kalnaus, S., Dudney, N. J., Westover, A. S., Herbert, E., & Hackney, S.
- Venue
- Science
- Published
- 2023-09-22
- Volume
- 381
- Issue
- 6664
- Pages
- eabg5998-eabg5998
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4386917125
- Cited by
- 463
- References
- 50
- FWCI
- 33.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.