Polyethylene materials with in-chain ketones from nonalternating catalytic copolymerization
Open accessPublished version of a preprint
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 1 of the 8 sources its claims cite were checked for support.
Abstract
Polyethylene with a nickel’s worth of CO: The biggest problem with polyethylene, the most abundantly manufactured plastic, is that it doesn’t break down easily once it is discarded. Chemists have long sought to introduce small quantities of carbon monoxide (CO) into polyethylene chains to promote photodegradation, but too much CO tends to jump in and spoil the plastic’s other properties. Baur et al . report that nickel catalysts coordinated by bulky phosphinophenolate ligands can catalyze ethylene polymerization with approximately 1% CO incorporation, preserving tensile strength while promoting degradation under ultraviolet exposure (see the Perspective by Sobkowicz). —JSY
Overview
CoChat Summary
TL;DR
Neutral Ni(II) phosphinophenolate catalysts enable non-alternating copolymerization of ethylene and CO, placing isolated in-chain keto groups into high molecular weight polyethylene while retaining HDPE-like crystallinity and tensile properties. The resulting keto-modified polyethylenes are melt-processable and may offer a route to less environmentally persistent polyolefins.
Key findings
- Non-alternating ethylene/CO copolymerization was achieved with Ni(II) catalysts 2–7; at low CO incorporation, keto groups are mostly isolated or non-alternating rather than alternating. For example, entry 4 gave 0.3 mol% CO incorporation, I/NA/A = 79/21/0, Mn = 140 × 10³ g mol⁻¹, Mw/Mn = 1.6, and Tm = 134 °C (68% crystallinity); entry 10 gave 0.6 mol% CO by IR (1.4 mol% by ¹³C NMR), I/NA/A = 27/33/39, Mn = 154 × 10³ g mol⁻¹, and Tm = 134 °C.
- The keto-modified polyethylenes reached high molecular weights up to Mw ~400,000 g mol⁻¹ and Mn ~220,000 g mol⁻¹, in contrast to prior ethylene–CO copolymerizations that yielded low molecular weight brittle waxes with Mn ≤ 3,000 g mol⁻¹.
- HDPE materials properties were retained: WAXS diffractograms were virtually identical to HDPE, melting/crystallization points were virtually unaltered, and injection-molded test bars showed ductile tensile behavior comparable to commercial HDPE. Reported tensile values were E = 995 MPa and σy = 29 MPa, compared with literature HDPE E = 900 MPa and σy = 27 MPa, and LDPE E = 240 MPa and σy = 12 MPa.
- CO appeared to suppress chain transfer and branching: endgroup analysis showed only olefinic endgroups also found in homopolyethylenes, and copolymers showed complete absence of branches compared with ethylene homopolymers; catalysts were stable for hours in CO copolymerizations.
Methods
- Polymerization experiments screened neutral Ni(II) catalyst precursors: salicylaldiminato 1 and phosphinophenolato complexes 2–8 with bulky substituents. Table 1 conditions were typically 10 µmol precatalyst, 100 mL toluene, 500 rpm, 50–120 °C, 5–40 bar ethylene, CO in feed 0.2–2.6 mol%, and 10–240 min; selected entries used 5 µmol precatalyst, 200 mL toluene, and 0.05 atm CO introduced before ethylene.
- Microstructure was analyzed by ¹³C NMR using ¹³CO copolymers, with 1D and 2D NMR and IR spectroscopy; CO incorporation was determined by IR and by ¹³C NMR. Molecular weights were measured by GPC in 1,2-dichlorobenzene at 160 °C via universal calibration against polystyrene standards; thermal data by DSC second heating; solid-state structure by WAXS; mechanical properties by tensile tests on injection-molded bars.
- Mechanistic features were probed by comparing polymer composition and yield over time, comparing copolymerization with ethylene homopolymerization, and analyzing polymer endgroups.
Limitations
- The paper does not include a dedicated Limitations section. Stated limitations include: copolymerization yields and average activities were lowered compared with ethylene homopolymerization; efficient copolymerization with catalyst 2 required ca. 100 °C; higher polymerization temperatures decreased CO incorporation and were necessary to achieve non-alternation; catalyst 1 had limited temperature stability and formed only alternating polyketone even at elevated temperature.
- Evident from the data: non-alternating products were obtained only at high E/CO ratios on the order of 100 and generally low CO feed (many useful entries at 0.2–0.6 mol% CO in feed); higher CO feed often gave alternating polyketone or very low yields. Several catalyst precursors (e.g., 1, 3, 4, 6, 8 under tested conditions) gave alternating polyketone or negligible activity.
- The paper presents perspectives for photolytic and oxidative chain breakdown but does not report degradation or long-term environmental persistence data for these specific materials.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



Verification
Claims the paper makes
0 Valid · 2 Not valid · 5 Not checked · 28 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At given initial reaction conditions, the composition of the formed polymer does not vary significantly with increasing reaction time and increasing polymer yield (entries 2 to 4 and 10 to 12).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Also, melting and crystallization points are virtually unaltered (Fig. 3c).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Catalysts are stable for hours in CO copolymerizations (entries 2 to 4).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Indeed, tensile tests on injection molded test bars show a ductile behavior that compares to commercial HDPE (Fig. 3d).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“We report how the long-sought non-alternating catalytic copolymerization of ethylene and CO can be achieved with Ni(II) catalysts.”
§ Polyethylene Materials with In-Chain Ketones from Catalytic Copolymerization > Introduction
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
13 more claims
Create a free account to see all 35 claims and every source verdict.
- It may state two separate claims as one. 16
- Probably not a substantial claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Insertion of ketones into PE through the copolymerization of ethylene with carbon monoxide results in photodegradable PE derivatives that can break down to smaller fragments but falls short of creating a circular plastics lifecycle”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“at desirable values of the CO incorporation of ca. 1 %, the majority of keto groups are not alternating, and moreover amongst these the isolated keto groups prevail.”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62)”
Citations
Cites
Palladium-Catalyzed Alternating Copolymerization of Alkenes and Carbon Monoxide
Drent, E., & Budzelaar, P. H. M. (1996) · Chemical Reviews · doi:10.1021/cr940282j · Cited by 974
Coordination−Insertion Copolymerization of Fundamental Polar Monomers
Nakamura, A., Ito, S., & Nozaki, K. (2009) · Chemical Reviews · doi:10.1021/cr900079r · Cited by 907
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
Drent, E., Van Broekhoven, J. A. M., & Doyle, M. J. (1991) · Journal of Organometallic Chemistry · doi:10.1016/0022-328x(91)80176-k · Cited by 528
The physics of polymers: concepts for understanding their structures and behavior
(1997) · Choice Reviews Online · doi:10.5860/choice.34-2811 · Cited by 434
Keim, W. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305308 · Cited by 426
Novel Coordination of (Benzoylmethylene)triphenylphosphorane in a Nickel Oligomerization Catalyst
Keim, W., Kowaldt, F. H., Goddard, R., & Krüger, C. (1978) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197804661 · Cited by 422
Exploring Ethylene/Polar Vinyl Monomer Copolymerizations Using Ni and Pd α-Diimine Catalysts
Chen, Z., & Brookhart, M. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00225 · Cited by 405
Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers
Tan, C., & Chen, C. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814634 · Cited by 402
Mechanistic Studies of the Palladium(II)-Catalyzed Copolymerization of Ethylene with Carbon Monoxide
Rix, F. C., Brookhart, M., & White, P. S. (1996) · Journal of the American Chemical Society · doi:10.1021/ja953276t · Cited by 345
Research works printed but not linked: 2
- Press release by Hyosung of May 5 2016: Hyosung introduces the polyketone brand ‘POKETONE™’ to the global market (retrieved June 8 2021 from www.poketone.com).
- C. E. Ash, D. G. Waters, A. A. Smaardijk, Soc. Plast. Eng. 53, 2319 (1995).
Cited by
Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy
Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y.-X. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 402
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Recent advances in polymers and polymer composites for food packaging
Zhang, M., Biesold, G. M., Choi, W., Yu, J., Deng, Y., Silvestre, C., & Lin, Z. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.022 · Cited by 335
Sustainable developments in polyolefin chemistry: Progress, challenges, and outlook
Wang, X.-Y., Gao, Y., & Tang, Y. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101713 · Cited by 204
Chemically recyclable polyolefin-like multiblock polymers
Zhao, Y., Rettner, E. M., Harry, K. L., Hu, Z., Miscall, J., Rorrer, N. A., & Miyake, G. M. (2023) · Science · doi:10.1126/science.adh3353 · Cited by 205
Synthesis and Deconstruction of Polyethylene-type Materials
Schwab, S. T., Baur, M., Nelson, T. F., & Mecking, S. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00587 · Cited by 194
Self-citationSustainable Design of Structural and Functional Polymers for a Circular Economy
von Vacano, B., Mangold, H., Vandermeulen, G. W. M., Battagliarin, G., Hofmann, M., Bean, J., & Künkel, A. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202210823 · Cited by 160
Tan, C., Zou, C., & Chen, C. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00058 · Cited by 158
Tiso, T., Winter, B., Wei, R., Hee, J., de Witt, J., Wierckx, N. J. P., Quicker, P., Bornscheuer, U. T., Bardow, A., Nogales, J., et al. (2021) · Metabolic Engineering · doi:10.1016/j.ymben.2021.12.006 · Cited by 168
Shi, C., Clarke, R. W., McGraw, M. L., & Chen, E. Y. ‐. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c12278 · Cited by 149
Zou, C., Si, G., & Chen, C. (2022) · Nature Communications · doi:10.1038/s41467-022-29533-9 · Cited by 151
Closing the Carbon Loop in the Circular Plastics Economy
Schirmeister, C. G., & Mülhaupt, R. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200247 · Cited by 130
High Density Polyethylenes Bearing Isolated In‐Chain Carbonyls**
Tang, S., Seidel, F. W., & Nozaki, K. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202110957 · Cited by 104
Lefay, C., & Guillaneuf, Y. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101764 · Cited by 111
Jang, Y.-J., Nguyen, S., & Hillmyer, M. A. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.3c12660 · Cited by 84
Closed-Loop Recyclable and Nonpersistent Polyethylene-like Polyesters
Eck, M., & Mecking, S. (2024) · Accounts of Chemical Research · doi:10.1021/acs.accounts.3c00811 · Cited by 83
Self-citationFunctional Polyolefins and Composites
Tan, C., Si, G., Zou, C., & Chen, C. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202424529 · Cited by 85
Robust and Dynamic Polymer Networks Enabled by Woven Crosslinks
Li, G., Zhao, J. H., Zhang, Z., et al. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202210078 · Cited by 66
Heterogenization Strategies for Nickel Catalyzed Synthesis of Polyolefins and Composites
Zou, C., Tan, C., & Chen, C. (2023) · Accounts of Materials Research · doi:10.1021/accountsmr.2c00263 · Cited by 64
Baur, M., Mast, N. K., Brahm, J. P., Habé, R., Morgen, T. O., & Mecking, S. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202310990 · Cited by 63
Self-citationLin, F., Morgen, T. O., & Mecking, S. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10488 · Cited by 60
Self-citationMechanically triggered on-demand degradation of polymers synthesized by radical polymerizations
Liu, P., Jimaja, S., Immel, S., Thomas, C., Mayer, M., Weder, C., & Bruns, N. (2024) · Nature Chemistry · doi:10.1038/s41557-024-01508-x · Cited by 78
“Degrada-bility can a priori be achieved by modifying polymer backbones with functional groups that can be cleaved under certain conditions 23–25 .”
BackgroundBalzade, Z., Sharif, F., & Anbaran, S. R. G. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00594 · Cited by 58
Polyethylene Materials with Tunable Degradability by Incorporating In-Chain Mechanophores
Zhang, X., Zhao, Y., Chen, M., Ji, M., Sha, Y., Nozaki, K., & Tang, S. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c07445 · Cited by 60
Mechanistic Insights into Ni(II)-Catalyzed Nonalternating Ethylene–Carbon Monoxide Copolymerization
Voccia, M., Odenwald, L., Baur, M., Lin, F., Falivene, L., Mecking, S., & Caporaso, L. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c04563 · Cited by 55
Self-citationPhotodegradable polar-functionalized polyethylenes
Wang, C., Xia, J., Zhang, Y., Hu, X., & Jian, Z. (2023) · National Science Review · doi:10.1093/nsr/nwad039 · Cited by 55
“In the IR spectra, the carbonyl (C=O) stretching resonance frequency for pure APK appeared at∼1692 cm−1 [26], whereas that for the strictly isolated keto-modified PE was observed at ∼1723 cm−1.”
BackgroundLight, Heat, and Force‐Responsive Polyolefins
Qu, W., Bi, Z., Zou, C., et al. (2024) · Advanced Science · doi:10.1002/advs.202307568 · Cited by 51
Lemmens, R., Vercammen, J., Belleghem, L. V., & Vos, D. E. D. (2024) · Nature Communications · doi:10.1038/s41467-024-53506-9 · Cited by 56
Dodge, H. M., Natinsky, B. S., Jolly, B. J., Zhang, H., Mu, Y., Chapp, S. M., Tran, T. V., Diaconescu, P. L., Do, L. H., Wang, D., et al. (2023) · ACS Catalysis · doi:10.1021/acscatal.3c00769 · Cited by 50
Stapler Strategies for Upcycling Mixed Plastics
Zou, C., Chen, J., Khan, M. A., Si, G., & Chen, C. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c05828 · Cited by 52
Teo, J. Y. Q., Yeung, C. W. S., Tan, T. T. Y., Loh, W. W., Loh, X. J., & Lim, J. Y. C. (2022) · Green Chemistry · doi:10.1039/d2gc02502g · Cited by 49
Chemically Recyclable Polyethylene‐like Sulfur‐Containing Plastics from Sustainable Feedstocks
Xia, Y., Yue, X., Sun, Y., Zhang, C., & Zhang, X. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202219251 · Cited by 47
Wang, H., Wang, X.-H., Zhou, B., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39707-8 · Cited by 47
“OH (1) Si reagent (2) Standard condition (3) TBAF OH Ph”
MethodChemo‐Enzymatic Depolymerization of Functionalized Low‐Molecular‐Weight Polyethylene
Oiffer, T., Leipold, F., Süss, P., Breite, D., Griebel, J., Khurram, M., Branson, Y., de Vries, E., Schulze, A., Helm, C. A., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202415012 · Cited by 52
Li, X., Mahadas, N. A., Zhang, M., DePodesta, J., Stefik, M., & Tang, C. (2024) · Polymer · doi:10.1016/j.polymer.2024.126698 · Cited by 53
Installing a Trigger to Upcycle High-Density Polyethylene
Nan, T., Chen, Q., Zheng, Z., Liang, Y., Qin, Y., Wang, Y., Liu, B., & Cui, D. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c08958 · Cited by 42
Exploring biotechnology for plastic recycling, degradation and upcycling for a sustainable future
Liu, X., Park, H., Ackermann, Y. S., Avérous, L., Ballerstedt, H., Besenmatter, W., Blázquez, B., Bornscheuer, U. T., Branson, Y., Casey, W. T., et al. (2025) · Biotechnology Advances · doi:10.1016/j.biotechadv.2025.108544 · Cited by 46
Xiong, S., Hong, A., Bailey, B. C., Spinney, H. A., Senecal, T. D., Bailey, H., & Agapie, T. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202206637 · Cited by 41
Outer‐Shell Self‐Supported Nickel Catalysts for the Synthesis of Polyolefin Composites
Li, J., Peng, D., Tan, C., & Chen, C. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202300359 · Cited by 40
Oxidative degradation and upcycling of polyethylene wastes
Che, Y., Wu, Y., & Niu, Z. (2024) · Science China Chemistry · doi:10.1007/s11426-024-2252-9 · Cited by 47
Čamdžić, L., & Stache, E. E. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c04595 · Cited by 38
Mechanical Recycling of Mixed Plastics by Supramolecular Dynamic Cross-Linking Strategy
Chen, J., Wang, W., Zou, C., & Chen, C. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c06330 · Cited by 47
Liu, J., Jia, M., Gnanou, Y., & Feng, X. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02522 · Cited by 40
Wang, W., Wang, Q., Zou, C., & Chen, C. (2024) · Precision Chemistry · doi:10.1021/prechem.3c00103 · Cited by 38
Li, K., Mu, H., Kang, X., & Jian, Z. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00091 · Cited by 34
Recent Advances in the Copolymerization of Ethylene with Polar Comonomers by Nickel Catalysts
Zhang, R., Gao, R., Gou, Q., Lai, J., & Li, X. (2022) · Polymers · doi:10.3390/polym14183809 · Cited by 34
“, the nonalternating copolymerization of ethylene with CO to incorporate in-chain keto groups in polyethylene chains with high molecular weight while retaining desirable material properties [44].”
BackgroundRecent developments in recycling of post-consumer polyethylene waste
Ma, Y., Jiang, X., Xiang, X., Qu, P., & Zhu, M. (2025) · Green Chemistry · doi:10.1039/d4gc06566b · Cited by 40
Stephan, J., Stühler, M. R., Rupf, S. M., Neale, S. E., & Plajer, A. J. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101510 · Cited by 33
Chen, S., Song, Y., Jiao, S., Zou, C., Li, S.-H., Chen, C., Lu, X., & Liu, Y. (2022) · Journal of Catalysis · doi:10.1016/j.jcat.2022.12.020 · Cited by 31
Liu, X., Hu, Z., Portela, B. S., Rettner, E. M., Pineda, A., Miscall, J., Rorrer, N. A., Krummel, A. T., Paton, R. S., & Miyake, G. M. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202418411 · Cited by 39
Controlled Cobalt-Mediated Free-Radical Co- and Terpolymerization of Carbon Monoxide
Fuchs, A. S., & Mecking, S. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c07200 · Cited by 33
Self-citationLiu, Y., Wang, C., Mu, H., & Jian, Z. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202404392 · Cited by 31
An old polymer class revisited: Versatile, degradable, non-alternating polyketones
Čamdžić, L., Haynes, C. A., & Stache, E. E. (2024) · Chem · doi:10.1016/j.chempr.2024.03.008 · Cited by 30
Otten, M., Gebbink, I. K., Schara, P., Tomović, Ž., Lutz, M., Bruijnincx, P. C. A., & Thevenon, A. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c05212 · Cited by 31
Chen, S., Ren, B., Li, S.-H., Song, Y., Jiao, S., Zou, C., Chen, C., Lu, X., & Liu, Y. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202204126 · Cited by 33
Aldehyde End‐Capped Degradable Polyethylenes From Hydrogen‐Controlled Ethylene/CO Copolymerization
Song, C., Yang, D., Wang, C., Tang, Z., Long, Y., Zhang, Y., & Jian, Z. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202410885 · Cited by 29
Catalytic chemical recycling and upcycling of polyolefin plastics
Tan, Y., Cheng, Y., Xu, J., & Wang, H. (2024) · Giant · doi:10.1016/j.giant.2024.100307 · Cited by 32
Striolo, A., & Huang, S. (2022) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.2c05192 · Cited by 29
Origin of Suppressed Chain Transfer in Phosphinephenolato Ni(II)-Catalyzed Ethylene Polymerization
Lin, F., Voccia, M., Odenwald, L., Göttker‐Schnetmann, I., Falivene, L., Caporaso, L., & Mecking, S. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c06597 · Cited by 28
Self-citationTailored synthesis of circular polyolefins
Chen, P.-A., Kang, X., Li, K., & Jian, Z. (2025) · Nature Sustainability · doi:10.1038/s41893-025-01524-w · Cited by 41
“Non-alternating copolymerization of ethylene with carbon monoxide yields photodegradable keto-PE, which breaks down into smaller irreversible fragments 19–23 .”
Solvent-Assisted Poly(lactic acid) Upcycling under Mild Conditions
Hubble, D., Nordahl, S. L., Zhu, T., Baral, N. R., Scown, C. D., & Liu, G. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c06500 · Cited by 28
Polymer design for the circular economy
Sobkowicz, M. J. (2021) · Science · doi:10.1126/science.abm2306 · Cited by 26
Xiao, X., Zheng, H., Gao, H., Cheng, Z., Feng, C., Yang, J.-H., & Gao, H. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25021348 · Cited by 26
“…are classi fi ed in Table 2. arrangement of the ethylene and carbonyl groups, the structural fragments and corresponding 16 ~1.6 b 23.8 b Based on the 15 ~2.4 b 42.7 b with in-chain ketones m > 1 0~10 <140 14 / 210.3 b 13 copolymerization, in C 2 D 2 Cl 4 , 383K, reference [51]. a (HFIP, 90”
BackgroundMethodInfluentialRobust and Dynamic Polymer Networks Enabled by Woven Crosslinks
Li, G., Zhao, J. H., Zhang, Z., et al. (2022) · Angewandte Chemie · doi:10.1002/ange.202210078 · Cited by 24
Acrylate-Induced β-H Elimination in Coordination Insertion Copolymerizaton Catalyzed by Nickel
Xiong, S., Hong, A., Ghana, P., Bailey, B. C., Spinney, H. A., Bailey, H., Henderson, B. S., Marshall, S. T., & Agapie, T. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c10800 · Cited by 25
Hemilabile α‐Diimine Nickel Catalyzed Olefin Polymerization
Khan, M. A., Liu, Y., Pang, W., Chen, A., & Chen, M. (2024) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202400881 · Cited by 26
Advances in sustainable polyolefins: synthesis, chemical transformation and recycling
Zhang, Y., Yang, D., Li, X., Chen, P.-A., Yao, X., & Jian, Z. (2025) · National Science Review · doi:10.1093/nsr/nwaf489 · Cited by 29
“[17 ,28 ].”
Modulating Polyethylene Mimics with Degradability via Synthesis and Modeling
Li, X., Suhail, A., Mahadas, N. A., Zhang, M., Hu, Z., Stefik, M., Kuksenok, O., & Tang, C. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00039 · Cited by 22
Xiong, S., Ghana, P., Bailey, B. C., Spinney, H. A., Henderson, B. S., Espinosa, M. R., & Agapie, T. (2023) · ACS Catalysis · doi:10.1021/acscatal.3c00627 · Cited by 24
Selective dehydrogenation of small and large molecules by a chloroiridium catalyst
Wang, K., Gan, L., Wu, Y., Zhou, M., Liu, G., & Huang, Z. (2022) · Science Advances · doi:10.1126/sciadv.abo6586 · Cited by 21
Baur, M., & Mecking, S. (2022) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00459 · Cited by 21
Self-citationWu, Q., Qin, K.-X., Gan, M.-X., Xu, J., Li, Z., & Li, Z.-C. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05080 · Cited by 22
Ghana, P., Xiong, S., Tekpor, A. A., Bailey, B. C., Spinney, H. A., Henderson, B. S., & Agapie, T. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c03416 · Cited by 20
High Density Polyethylenes Bearing Isolated In‐Chain Carbonyls**
Tang, S., Seidel, F. W., & Nozaki, K. (2021) · Angewandte Chemie · doi:10.1002/ange.202110957 · Cited by 20
Lin, F., & Mecking, S. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202203923 · Cited by 22
Self-citationYonezaki, G., Seidel, F. W., Takahashi, K., & Nozaki, K. (2023) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20230073 · Cited by 21
Stefano, F. D., Baur, M., Rosa, C. D., & Mecking, S. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02309 · Cited by 20
“42,51,66,67 However, these keto-PE materials are highly crystalline, which may limit their possible applications if softer materials are required.”
BackgroundResultInfluentialSelf-citationZhelyabovskiy, M., Jung, H., Diaconescu, P. L., Peters, J. C., & Agapie, T. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202503003 · Cited by 19
Synthesis of UHMWPE by neutral phosphine-phenolate based nickel catalysts
Peng, D., He, H., Pang, W., et al. (2023) · Polymer · doi:10.1016/j.polymer.2023.126019 · Cited by 19
Using Classifiers To Predict Catalyst Design for Polyketone Microstructure
Wong, Y.-P., Jung, H., Lin, S., Shammami, M., Roshandel, H., Dodge, H. M., Chapp, S. M., Castilla, L. C. R. D., Wang, D., Do, L. H., et al. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c11666 · Cited by 18
Chen, L., Wang, Z., Fang, E., Fan, Z., & Song, S. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202503408 · Cited by 18
Cui, S., Lu, Z., Lopez, J. C., Kränzlein, M., Kim, C. J., Lin, S., LaPointe, A. M., & Coates, G. W. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c09943 · Cited by 21
Xiong, S., Shoshani, M. M., Nett, A. J., et al. (2023) · Organometallics · doi:10.1021/acs.organomet.3c00307 · Cited by 18
Wang, W., Nie, N., Xu, M., & Zou, C. (2023) · Polymer Chemistry · doi:10.1039/d3py00925d · Cited by 18
Highly robust iminopyridyl nickel catalysts for the synthesis of polyethylene wax
Khan, M. A., Gui, F., Liao, D., et al. (2024) · Polymer · doi:10.1016/j.polymer.2024.127424 · Cited by 17
Thioether-Functionalized Self-Healing Polyolefins for Flexible Conductors
Chi, M., Sun, L., Nishiura, M., Huang, L., Zhang, H., Higaki, Y., Lee, S., Fukuda, K., Zhao, Y., Someya, T., et al. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c06579 · Cited by 18
Rapid Biodegradable Ionic Aggregates of Polyesters Constructed with Fertilizer Ingredients
Lee, H.-J., Cho, W. Y., Lee, H. C., Seo, Y. H., Baek, J. W., Lee, P. C., & Lee, B. Y. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c05258 · Cited by 18
Li, J., Wang, Y., Cai, W. J., Yang, G., Tian, Q., Huang, Y., Peng, D., Zou, C., & Tan, C. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02344 · Cited by 17
Wang, Y., Lai, J., Gao, R., et al. (2024) · Polymers · doi:10.3390/polym16121676 · Cited by 17
Karimi, M., Arabi, H., & Sadjadi, S. (2022) · Journal of Catalysis · doi:10.1016/j.jcat.2022.05.018 · Cited by 17
Nickel Catalysts for Non‐Alternating CO‐Ethylene Copolymerization
Zhu, L., Gaire, S., Ziegler, C. J., & Li, J. (2022) · ChemCatChem · doi:10.1002/cctc.202200974 · Cited by 16
Heat-Resistant CO2-Based Polycarbonate Thermoplastics
Liu, J., Jia, M., Gnanou, Y., et al. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00885 · Cited by 16
Odenwald, L., Wursthorn, L., & Mecking, S. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c16468 · Cited by 15
“16 Motivated by these catalytic properties, we explored the fundamental reactivity of 1 toward CO. S2).”
InfluentialSelf-citationIberl, S., Voccia, M., Ritacco, I., Odenwald, L., Baur, M., Falivene, L., Caporaso, L., & Mecking, S. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c00935 · Cited by 15
Self-citationYuan, H., Takahashi, K., Nakagawa, S., Yoshie, N., & Nozaki, K. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00476 · Cited by 14
Xu, Z., Pan, J., Xu, J. K., Cheng, W., Li, Z., & Cheng, C. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02804 · Cited by 16
Xiong, S., Spinney, H. A., Bailey, B. C., Henderson, B. S., Tekpor, A. A., Espinosa, M. R., Saha, P., & Agapie, T. (2024) · ACS Catalysis · doi:10.1021/acscatal.4c00156 · Cited by 17
King, A. J., Sherrier, R. P., Aubé, J., & Zhukhovitskiy, A. V. (2024) · Polymer Chemistry · doi:10.1039/d4py00973h · Cited by 17
Shoshani, M. M., Xiong, S., Lawniczak, J. J., Zhang, X., Miller, T. F., & Agapie, T. (2022) · Organometallics · doi:10.1021/acs.organomet.2c00241 · Cited by 17
Interfacial chain-growth polymerization enables polypropylene-like and circular polythioglycolide
Wang, Y., Wu, S., Chen, J., Guo, C., Li, M., Wang, H., Chen, Q., Men, Y., Wang, X., Tao, Y., et al. (2025) · Science Advances · doi:10.1126/sciadv.adv5467 · Cited by 16
Metadata
- Authors
- Baur, M., Lin, F., Morgen, T. O., Odenwald, L., & Mecking, S.
- Affiliations
- University of Konstanz (DE)
- Corresponding author
- Mecking, Stefan
- Venue
- Science
- Published
- 2021-10-29
- Volume
- 374
- Issue
- 6567
- Pages
- 604-607
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W3211073624
- Semantic Scholar
- 56143bd9bef2a397e2c0692f3981fe7fe06e9634
- Cited by
- 287
- References
- 46
- Citations by year
- 2026: 60 · 2025: 72 · 2024: 65 · 2023: 40 · 2022: 42 · 2021: 8
- FWCI
- 14.88
- Type
- journal article
- Language
- en
- Open access
- green
- doi.org
- Licence
- cc-by-nc-nd
- Locations
- Science (publishedVersion)
- ChemRxiv (submittedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- Figshare (submittedVersion, cc-by-nc-nd)
- KOPS (University of Konstanz) (submittedVersion)
- Funders
- H2020 European Research Council (832480)
- Topics
- Physical Sciences › Chemistry › Organic Chemistry › Organometallic Complex Synthesis and Catalysis
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- polyethylene, high-density polyethylene, tensile properties, injection molding
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.