Polyethylene materials with in-chain ketones from nonalternating catalytic copolymerization
Open accessPublished version of a preprint
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 1 of the 8 sources its claims cite were checked for support.
Abstract
Polyethylene with a nickel’s worth of CO: The biggest problem with polyethylene, the most abundantly manufactured plastic, is that it doesn’t break down easily once it is discarded. Chemists have long sought to introduce small quantities of carbon monoxide (CO) into polyethylene chains to promote photodegradation, but too much CO tends to jump in and spoil the plastic’s other properties. Baur et al . report that nickel catalysts coordinated by bulky phosphinophenolate ligands can catalyze ethylene polymerization with approximately 1% CO incorporation, preserving tensile strength while promoting degradation under ultraviolet exposure (see the Perspective by Sobkowicz). —JSY
Overview
CoChat Summary
TL;DR
Neutral Ni(II) phosphinophenolate catalysts enable non-alternating copolymerization of ethylene and CO, placing isolated in-chain keto groups into high molecular weight polyethylene while retaining HDPE-like crystallinity and tensile properties. The resulting keto-modified polyethylenes are melt-processable and may offer a route to less environmentally persistent polyolefins.
Key findings
- Non-alternating ethylene/CO copolymerization was achieved with Ni(II) catalysts 2–7; at low CO incorporation, keto groups are mostly isolated or non-alternating rather than alternating. For example, entry 4 gave 0.3 mol% CO incorporation, I/NA/A = 79/21/0, Mn = 140 × 10³ g mol⁻¹, Mw/Mn = 1.6, and Tm = 134 °C (68% crystallinity); entry 10 gave 0.6 mol% CO by IR (1.4 mol% by ¹³C NMR), I/NA/A = 27/33/39, Mn = 154 × 10³ g mol⁻¹, and Tm = 134 °C.
- The keto-modified polyethylenes reached high molecular weights up to Mw ~400,000 g mol⁻¹ and Mn ~220,000 g mol⁻¹, in contrast to prior ethylene–CO copolymerizations that yielded low molecular weight brittle waxes with Mn ≤ 3,000 g mol⁻¹.
- HDPE materials properties were retained: WAXS diffractograms were virtually identical to HDPE, melting/crystallization points were virtually unaltered, and injection-molded test bars showed ductile tensile behavior comparable to commercial HDPE. Reported tensile values were E = 995 MPa and σy = 29 MPa, compared with literature HDPE E = 900 MPa and σy = 27 MPa, and LDPE E = 240 MPa and σy = 12 MPa.
- CO appeared to suppress chain transfer and branching: endgroup analysis showed only olefinic endgroups also found in homopolyethylenes, and copolymers showed complete absence of branches compared with ethylene homopolymers; catalysts were stable for hours in CO copolymerizations.
Methods
- Polymerization experiments screened neutral Ni(II) catalyst precursors: salicylaldiminato 1 and phosphinophenolato complexes 2–8 with bulky substituents. Table 1 conditions were typically 10 µmol precatalyst, 100 mL toluene, 500 rpm, 50–120 °C, 5–40 bar ethylene, CO in feed 0.2–2.6 mol%, and 10–240 min; selected entries used 5 µmol precatalyst, 200 mL toluene, and 0.05 atm CO introduced before ethylene.
- Microstructure was analyzed by ¹³C NMR using ¹³CO copolymers, with 1D and 2D NMR and IR spectroscopy; CO incorporation was determined by IR and by ¹³C NMR. Molecular weights were measured by GPC in 1,2-dichlorobenzene at 160 °C via universal calibration against polystyrene standards; thermal data by DSC second heating; solid-state structure by WAXS; mechanical properties by tensile tests on injection-molded bars.
- Mechanistic features were probed by comparing polymer composition and yield over time, comparing copolymerization with ethylene homopolymerization, and analyzing polymer endgroups.
Limitations
- The paper does not include a dedicated Limitations section. Stated limitations include: copolymerization yields and average activities were lowered compared with ethylene homopolymerization; efficient copolymerization with catalyst 2 required ca. 100 °C; higher polymerization temperatures decreased CO incorporation and were necessary to achieve non-alternation; catalyst 1 had limited temperature stability and formed only alternating polyketone even at elevated temperature.
- Evident from the data: non-alternating products were obtained only at high E/CO ratios on the order of 100 and generally low CO feed (many useful entries at 0.2–0.6 mol% CO in feed); higher CO feed often gave alternating polyketone or very low yields. Several catalyst precursors (e.g., 1, 3, 4, 6, 8 under tested conditions) gave alternating polyketone or negligible activity.
- The paper presents perspectives for photolytic and oxidative chain breakdown but does not report degradation or long-term environmental persistence data for these specific materials.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



Verification
Claims the paper makes
0 Valid · 2 Not valid · 5 Not checked · 28 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At given initial reaction conditions, the composition of the formed polymer does not vary significantly with increasing reaction time and increasing polymer yield (entries 2 to 4 and 10 to 12).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Also, melting and crystallization points are virtually unaltered (Fig. 3c).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Catalysts are stable for hours in CO copolymerizations (entries 2 to 4).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Indeed, tensile tests on injection molded test bars show a ductile behavior that compares to commercial HDPE (Fig. 3d).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“We report how the long-sought non-alternating catalytic copolymerization of ethylene and CO can be achieved with Ni(II) catalysts.”
§ Polyethylene Materials with In-Chain Ketones from Catalytic Copolymerization > Introduction
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
13 more claims
Create a free account to see all 35 claims and every source verdict.
- It may state two separate claims as one. 16
- Probably not a substantial claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Insertion of ketones into PE through the copolymerization of ethylene with carbon monoxide results in photodegradable PE derivatives that can break down to smaller fragments but falls short of creating a circular plastics lifecycle”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“at desirable values of the CO incorporation of ca. 1 %, the majority of keto groups are not alternating, and moreover amongst these the isolated keto groups prevail.”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62)”
Citations
Cites
Palladium-Catalyzed Alternating Copolymerization of Alkenes and Carbon Monoxide
Drent, E., & Budzelaar, P. H. M. (1996) · Chemical Reviews · doi:10.1021/cr940282j · Cited by 974
Coordination−Insertion Copolymerization of Fundamental Polar Monomers
Nakamura, A., Ito, S., & Nozaki, K. (2009) · Chemical Reviews · doi:10.1021/cr900079r · Cited by 907
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
Drent, E., Van Broekhoven, J. A. M., & Doyle, M. J. (1991) · Journal of Organometallic Chemistry · doi:10.1016/0022-328x(91)80176-k · Cited by 528
The physics of polymers: concepts for understanding their structures and behavior
(1997) · Choice Reviews Online · doi:10.5860/choice.34-2811 · Cited by 434
Keim, W. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305308 · Cited by 426
Novel Coordination of (Benzoylmethylene)triphenylphosphorane in a Nickel Oligomerization Catalyst
Keim, W., Kowaldt, F. H., Goddard, R., & Krüger, C. (1978) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197804661 · Cited by 422
Exploring Ethylene/Polar Vinyl Monomer Copolymerizations Using Ni and Pd α-Diimine Catalysts
Chen, Z., & Brookhart, M. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00225 · Cited by 405
Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers
Tan, C., & Chen, C. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814634 · Cited by 402
Mechanistic Studies of the Palladium(II)-Catalyzed Copolymerization of Ethylene with Carbon Monoxide
Rix, F. C., Brookhart, M., & White, P. S. (1996) · Journal of the American Chemical Society · doi:10.1021/ja953276t · Cited by 345
Research works printed but not linked: 2
- Press release by Hyosung of May 5 2016: Hyosung introduces the polyketone brand ‘POKETONE™’ to the global market (retrieved June 8 2021 from www.poketone.com).
- Ash. C. E. Ash, C. E.; Waters, D. G.; Smaardijk, A. A. Syn- thesis and stability of aliphatic polyketones. Annu. Tech. Conf. - Soc. Plast. Eng. 1995, 53, 2319-2325.
Cited by
Items 201–284 of 284
Regulation of α-diimine nickel catalyzed olefin polymerization by remote site modifications
Li, Y., Chen, Y., Li, P., Hu, P., Xu, G., Li, C., Zhang, S., & Wang, F. (2024) · Polymer · doi:10.1016/j.polymer.2024.127074 · Cited by 3
Vacuum UV (VUV) Photo‐Oxidation of Polymer Surfaces to Enhance Adhesion
Takacs, G. A., & Miri, M. J. (2024) · doi:10.1002/9781394231034.ch4 · Cited by 3
Introducing Closed-Loop Chemically Recyclable Polymers in Undergraduate Polymer Chemistry Course
Zhang, C., & Zhang, X. (2025) · Journal of Chemical Education · doi:10.1021/acs.jchemed.5c00420 · Cited by 2
Ni(II)‐Catalyzed Nonalternating Carbonylative Polymerization Toward Branched Polyethylene Waxes
Xu, Z., Chen, S. Y., & Liu, Y. (2025) · ChemCatChem · doi:10.1002/cctc.202501155 · Cited by 2
Fornacon‐Wood, C., Steiner, L., Xu, C., Paulus, B., & Plajer, A. J. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202515104 · Cited by 3
Wang, S., Ren, B., Song, Y., Guo, L., Chen, S., Lu, X., & Liu, Y. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202520391 · Cited by 2
Synthesis of discrete oligoethylenes towards chemically recyclable polyolefins
Tan, R., An, Y., liu, Y., Yang, X., Zhong, Q., Yan, X., Hu, Y., Chen, M., Cen, J., Huang, X., et al. (2026) · Nature Synthesis · doi:10.1038/s44160-025-00955-9 · Cited by 9
Yu, F., Dai, B., Liu, N., Liu, B.-Y., & Zou, C. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3501-9 · Cited by 3
Feng, Y. R., Wang, M., Wang, X., Liu, J.-K., Wang, H., Gong, J., & Jiang, H. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114560 · Cited by 2
Chen, Y., Chen, A., Long, Y., & Wang, W. (2026) · Applied Organometallic Chemistry · doi:10.1002/aoc.70534 · Cited by 3
Long-Chain Polythioamides: Synthesis and Mechanical Evaluation of Their Hydrogen Bonding Properties
Lu, Y., Takahashi, K., Roopsung, N., Nakagawa, S., Yoshie, N., & Nozaki, K. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03179 · Cited by 3
Zhao, X., Zheng, B., Xu, D., et al. (2026) · Applied Organometallic Chemistry · doi:10.1002/aoc.70597 · Cited by 2
Attractive Ni … O Interactions Enable Non‐Alternating Ethylene‐Carbon Monoxide Copolymerization
Zhao, Y., Tomasini, M., Göttker‐Schnetmann, I., Falivene, L., Caporaso, L., & Mecking, S. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.6761777 · Cited by 2
“Keto-polyethylene materials were enabled by the use of advanced nickel catalysts in combination with gas feed systems for controlled high ethylene / CO ratios [11].”
Self-citationUltrastrong Polyketone Hot-Melt Adhesives Enabled by Ni-Catalyzed Carbonylative Polymerization
Li, S. H., Guo, L., Chen, S.-Y., Lu, X., & Liu, Y. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c08814 · Cited by 2
Khan, M. A., Iqbal, O., Wang, Z.-H., & Wang, F. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3675-9 · Cited by 4
Aldehyde End‐Capped Degradable Polyethylenes From Hydrogen‐Controlled Ethylene/CO Copolymerization
Song, C., Yang, D., Wang, C., Tang, Z., Long, Y., Zhang, Y., & Jian, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202410885 · Cited by 2
Liu, X., Hu, Z., Portela, B. S., Rettner, E. M., Pineda, A., Miscall, J., Rorrer, N. A., Krummel, A. T., Paton, R. S., & Miyake, G. M. (2024) · Angewandte Chemie · doi:10.1002/ange.202418411 · Cited by 3
Chemically Recyclable Polyethylene‐like Sulfur‐Containing Plastics from Sustainable Feedstocks
Xia, Y., Yue, X., Sun, Y., Zhang, C., & Zhang, X. (2023) · Angewandte Chemie · doi:10.1002/ange.202219251 · Cited by 2
Selective Deuteration along a Polyethylene Chain: Differentiating Conformation Segment by Segment
Burkey, A. A., Kotula, A. P., Snyder, C. R., Orski, S. V., & Beers, K. L. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01560 · Cited by 1
Huo, L., Zhu, S., Zhao, Y., et al. (2025) · Organic Letters · doi:10.1021/acs.orglett.5c00547 · Cited by 1
Chain Dynamics of Halogenated Precision Polyethylenes in Different Crystal Polymorphs
Anuar, A., Schaller, M., Alamo, R. G., et al. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00349 · Cited by 1
Chen, L., Wang, Z., Fang, E., Fan, Z., & Song, S. (2025) · Angewandte Chemie · doi:10.1002/ange.202503408 · Cited by 1
Zheng, Y., Grimaldi, I., Lacombe, B., Gong, D., Lamparelli, D. H., & Capacchione, C. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114065 · Cited by 1
Nowicka, W., Szot, W., Jasińska-Walc, L., & Duchateau, R. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c02911 · Cited by 1
Kititheerakul, T., & Surawatanawong, P. (2025) · Inorganic Chemistry Frontiers · doi:10.1039/d5qi01319d · Cited by 1
Wang, S., Ren, B., Song, Y., et al. (2025) · Angewandte Chemie · doi:10.1002/ange.202520391 · Cited by 1
Photo‐, Thermal‐, and Electro‐Responsive Polyolefin‐Based Actuators
Wang, Q., Sun, H., Zou, C., & Chen, C. (2026) · Angewandte Chemie · doi:10.1002/ange.202523449 · Cited by 3
Mechanically Triggered Chemical Recyclable Polyethylene‐Like Materials
Xu, M., Liu, P. Q., Chen, C., & Choi, T. (2026) · Angewandte Chemie · doi:10.1002/ange.202522618 · Cited by 1
Wu, L., Glebe, U., Kwok, K. T. K., Sun, J., Lam, J. W. Y., & Tang, B. Z. (2026) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2026.103135 · Cited by 1
All-Hydrocarbon Polymers with Chemical Recyclability via a Catalyst-Free and Solvent-Free Method
Li, Q., Li, X., Zhang, Y., & Jian, Z. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.5c21514 · Cited by 1
Degradable polyethylene-like materials
Yan, X., Zhou, H., An, Y., Wang, G., Hu, Y., Tan, R., & Zhang, Z. (2026) · Scientia Sinica Chimica · doi:10.1360/ssc-2025-0300 · Cited by 1
Precise Structural Design for Chemically Recyclable Polymers
Xu, X., Deng, J., Zhang, Z., & Yan, X. (2026) · Precision Chemistry · doi:10.1021/prechem.5c00377 · Cited by 3
Advances in Systems Engineering of Carbon Dioxide Electroreduction
Xiong, W., Yang, G., Guo, M., Zhang, Q., Liu, Z., Yu, H., & Peng, F. (2026) · Carbon and Hydrogen · doi:10.1002/cbh2.70055 · Cited by 2
Accessing Degradable Polyethylenes via Catalytic Ethylene Copolymerization
Chen, M., & Tang, S. (2026) · Chemistry - A European Journal · doi:10.1002/chem.71033 · Cited by 2
Yan, Z., Xi, T., LI, W., & Lin, F. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00831 · Cited by 1
Self-citationElectronic and Steric Effects in Iminopyridyl Ni(II) Catalysts for Ethylene (Co)Polymerization
Guo, J., Chen, A., Zhu, W., Xue, L., Ma, Z., Wang, W., Zhu, N., Khan, M. A., & Tan, C. (2026) · Catalysis Letters · doi:10.1007/s10562-026-05381-w · Cited by 4
Wursthorn, L., Denton, E. H., Ritz, F., Graf, A., Hartmann, K., & Mecking, S. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c05927 · Cited by 1
Self-citationSolid-Supported Ni(II) Catalysts for Nonalternating Carbonylative Polymerization of Ethylene
Li, S.-H., Jiao, S., Xu, Z.-Y., Zhang, J.-N., Zou, C., Chen, S.-Y., & Liu, Y. (2026) · Precision Chemistry · doi:10.1021/prechem.6c00064 · Cited by 1
Heterogeneous Nickel-Catalyzed Carbonylative Polymerization of Ethylene
Zhang, J.-N., Zhang, Z.-H., Chen, S.-Y., Lu, X., & Liu, Y. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01312 · Cited by 1
Nonalternating Chain Walking Polymerization Enables In-Chain Ketone Polyolefin Elastomers
Zhang, Z.-H., Zhang, J.-N., Chen, S.-Y., Lu, X., & Liu, Y. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c13517 · Cited by 1
Chemo‐Enzymatische Depolymerisation von funktionalisiertem niedermolekularem Polyethylen
Oiffer, T., Leipold, F., Süss, P., Breite, D., Griebel, J., Khurram, M., Branson, Y., de Vries, E., Schulze, A., Helm, C. A., et al. (2024) · Angewandte Chemie · doi:10.1002/ange.202415012 · Cited by 2
Zhelyabovskiy, M., Jung, H., Diaconescu, P. L., Peters, J. C., & Agapie, T. (2025) · Angewandte Chemie · doi:10.1002/ange.202503003 · Cited by 2
Sustainable upcycling of polyethylene waste to compatibilizers and valuable chemicals
Nguyen, D. K., Schyns, Z. O. G., Korley, L. T. J., & Vlachos, D. G. (2025) · Green Chemistry · doi:10.1039/d5gc02799c · Cited by 4
Polyethylene Materials Bearing In-chain MechanophoresPreprint
Zhang, X., Zhao, Y., Chen, M., & Tang, S. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-28rqm
Trendbericht Makromolekulare Chemie 2022
Gröschel, A., & Brendel, J. C. (2022) · Nachrichten aus Chemie Technik und Laboratorium · doi:10.1002/nadc.20224129512
Zhang, X., Shi, H., Gao, Y., & Tang, Y. J. (2022) · Scientia Sinica Chimica · doi:10.1360/ssc-2022-0231
The Synthesis of Hyperbranched Ethylene Oligomers by Nickel Catalysts with Oxazole StructurePreprint
Nie, N., Wang, Y., Tan, C., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4537658
Stapler Strategies for Upcycling Mixed PlasticsPreprint
Chen, C., Zou, C., Chen, J., et al. (2023) · Research Square · doi:10.21203/rs.3.rs-3322693/v1
Regulation of Α-Diimine Nickel Catalyzed Olefin Polymerization by Remote Site ModificationsPreprint
Li, Y., Chen, Y., Li, P., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4684284
Xu, S., Hu, X. Y., Lei, M., Hu, X., Li, P., Li, C., Chen, A., & Wang, F. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5173708
Fornacon‐Wood, C., Steiner, L., Xu, C., Paulus, B., & Plajer, A. J. (2025) · Angewandte Chemie · doi:10.1002/ange.202515104
Yang, D., Zhang, Y., & Jian, Z. (2025) · Angewandte Chemie · doi:10.1002/ange.202520230
Otten, M., Hendriks, J., Witteman, L., Thevenon, A., & Bruijnincx, P. C. A. (2026) · Chemical Communications · doi:10.1039/d6cc01531j
Degradable poly(di)olefins enabled by acid-labile acetal without compromising the performances
Sun, S., Wei, L., Ren, T., & Gong, D. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111841
Shan, Y., Tao, Y., Miao, Q., et al. (2025) · ChemistrySelect · doi:10.1002/slct.202505832
Fei, J., Wang, K., Yang, T., et al. (2026) · Green Chemistry · doi:10.1039/d5gc05759k
Polyesters with inbuilt photolabile units for degradation of PET in the natural environment
Gesslbauer, S., Sang, T., Dalland, D., Titipunya, P., Parry, M., Wallis, C. J., Ho, S. K. Y., Hill, G., Santagiuliana, G., & Britovsek, G. J. P. (2026) · Polymer Chemistry · doi:10.1039/d5py00992h
Xu, Z., Li, K., Hu, X., & Jian, Z. (2026) · Journal of Polymer Science · doi:10.1002/pol.20251198
Chen, W., & Zhang, R. (2026) · Magnetic Resonance Letters · doi:10.1016/j.mrl.2026.200270
Upcycling of polyethylenes by catalysis
Idris, A. A. (2023) · theses.fr (ABES) · doi:10.70675/d888f9b6z2cdbz4ecdz860az80c201c1c7d9
Hu, S., Zhou, Y., Hu, H., Mao, G., & Xin, S. (2026) · Polymers · doi:10.3390/polym18101243
“Building on the expanded monomer scope, Baur et al. [109] reported that [P,O]-type Ni catalysts 44a – g (Scheme 19) bearing bulky substituents on the phenolate moiety enabled non-alternating copolymerization of ethylene with carbon monoxide.”
Iberl, S., & Mecking, S. (2026) · Organometallics · doi:10.1021/acs.organomet.6c00112 · Cited by 1
Self-citationYu, F., Miao, Q., Song, M., Yu, H., Shan, Y., Pang, W., Dai, B., Liu, N., Liu, B., Wang, F. W., et al. (2026) · Applied Organometallic Chemistry · doi:10.1002/aoc.70603
Fornacon‐Wood, C., Riegler, M., Steiner, L., Sahoo, S., Retsch, M., Falco, F. D., Paulus, B., & Plajer, A. J. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01260
Enhanced Toughness in Amide Group-Modified Polyethylene Through N–H···O Hydrogen Bond Dissociation
Li, K., Pan, Y., Ye, E., Xu, L., Loh, X. J., & Li, Z. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00163
Zheng, J., Xu, X., Yan, Z., Niu, J., Jin, S., Meng, Q., & Lin, F. (2026) · Polymer science & technology. · doi:10.1021/polymscitech.6c00052
Self-citationYang, F.-R., Wang, W.-B., Yang, T. T., Sun, H., Wang, Q., Xu, M.-H., Chen, J., & Zou, C. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178505 · Cited by 1
Ionic Cluster Catalyst Assembly Strategy for Ethylene Polymerization and Copolymerization
Fl, Y., Xu, M., Liu, B., Chen, C., & Zou, C. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c04007
Attractive Ni … O Interactions Enable Non‐Alternating Ethylene‐Carbon Monoxide Copolymerization
Zhao, Y., Tomasini, M., Göttker‐Schnetmann, I., Falivene, L., Caporaso, L., & Mecking, S. (2026) · Angewandte Chemie · doi:10.1002/ange.6761777
Self-citationMachine learning approaches to predicting metal catalyst performance in olefin polymerization
Wong, Y.-P., & Diaconescu, P. L. (2026) · Inorganic Chemistry Frontiers · doi:10.1039/d6qi00924g
Fan, J., Young, W. O., Enokida, J. S., Guo, Y., Gordillo, M. A., Brown, H. A., Sun, M., & Gao, W. (2026) · Journal of Chromatography A · doi:10.1016/j.chroma.2026.467280
Scope of Ni(II)-Catalyzed Nonalternating Ethylene/Carbon Monoxide Copolymerization
Wursthorn, L., Iberl, S., Zhao, Y., Tomasini, M., Fritschi, M., Ritacco, I., Voccia, M., Falivene, L., Takahashi, K., Lu, B., et al. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c07158
Self-citationChen, N., Sun, H., Wang, Y., Xia, Z., Qasim, M., Li, C., Chen, A., Ma, Z., & Tan, C. (2026) · Journal of Catalysis · doi:10.1016/j.jcat.2026.117091 · Cited by 2
Well‐Defined Nickel Precatalysts: Form, Function, and Application
John, M. E., Koutsantonis, G. A., Dorta, R., et al. (2026) · Chemistry - A European Journal · doi:10.1002/chem.71481
Nan, T., Liu, B., Liang, Y., & Cui, D. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.5803210
Nan, T., Liu, B., Liang, Y., & Cui, D. (2026) · Angewandte Chemie · doi:10.1002/ange.5803210
From Dicyclopentadiene to Chemically Recyclable Polymeric Materials
Fang, E., Chen, L., He, Z., & Song, S. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c06910
Tan, J., Dai, S., Wuliu, Y., Chen, S. G., Cao, S., Yang, T., Fan, H., Pan, Y., Zhu, C., & Xu, J. Z. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01808
Chen, S.-Y., Li, J., & Liu, Y. (2026) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6c00616
Wang, Y., Wang, X., & Tao, Y. (2026) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6c00551
Recent Advances in Addition Copolymerization of Cyclobutenes
Chen, M., Ji, M., & Tang, S. (2026) · Polymer science & technology. · doi:10.1021/polymscitech.6c00116
Bio‐Based Solution for Polyolefin Synthesis Enabled by Carbonate Solvent and Comonomer
Xu, X., Wang, L., Niu, J., Niu, X., Yang, K., & Lin, F. (2026) · Angewandte Chemie · doi:10.1002/ange.3998761
Self-citationBio‐Based Solution for Polyolefin Synthesis Enabled by Carbonate Solvent and Comonomer
Xu, X., Wang, L., Niu, J., Niu, X., Yang, K., & Lin, F. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.3998761
Self-citation
Metadata
- Authors
- Baur, M., Lin, F., Morgen, T. O., Odenwald, L., & Mecking, S.
- Affiliations
- University of Konstanz (DE)
- Corresponding author
- Mecking, Stefan
- Venue
- Science
- Published
- 2021-10-29
- Volume
- 374
- Issue
- 6567
- Pages
- 604-607
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W3211073624
- Semantic Scholar
- 56143bd9bef2a397e2c0692f3981fe7fe06e9634
- Cited by
- 287
- References
- 46
- Citations by year
- 2026: 60 · 2025: 72 · 2024: 65 · 2023: 40 · 2022: 42 · 2021: 8
- FWCI
- 14.88
- Type
- journal article
- Language
- en
- Open access
- green
- doi.org
- Licence
- cc-by-nc-nd
- Locations
- Science (publishedVersion)
- ChemRxiv (submittedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- Figshare (submittedVersion, cc-by-nc-nd)
- KOPS (University of Konstanz) (submittedVersion)
- Funders
- H2020 European Research Council (832480)
- Topics
- Physical Sciences › Chemistry › Organic Chemistry › Organometallic Complex Synthesis and Catalysis
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- polyethylene, high-density polyethylene, tensile properties, injection molding
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.