Polyethylene materials with in-chain ketones from nonalternating catalytic copolymerization
Open accessPublished version of a preprint
The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 1 of the 8 sources its claims cite were checked for support.
Abstract
Polyethylene with a nickel’s worth of CO: The biggest problem with polyethylene, the most abundantly manufactured plastic, is that it doesn’t break down easily once it is discarded. Chemists have long sought to introduce small quantities of carbon monoxide (CO) into polyethylene chains to promote photodegradation, but too much CO tends to jump in and spoil the plastic’s other properties. Baur et al . report that nickel catalysts coordinated by bulky phosphinophenolate ligands can catalyze ethylene polymerization with approximately 1% CO incorporation, preserving tensile strength while promoting degradation under ultraviolet exposure (see the Perspective by Sobkowicz). —JSY
Overview
CoChat Summary
TL;DR
Neutral Ni(II) phosphinophenolate catalysts enable non-alternating copolymerization of ethylene and CO, placing isolated in-chain keto groups into high molecular weight polyethylene while retaining HDPE-like crystallinity and tensile properties. The resulting keto-modified polyethylenes are melt-processable and may offer a route to less environmentally persistent polyolefins.
Key findings
- Non-alternating ethylene/CO copolymerization was achieved with Ni(II) catalysts 2–7; at low CO incorporation, keto groups are mostly isolated or non-alternating rather than alternating. For example, entry 4 gave 0.3 mol% CO incorporation, I/NA/A = 79/21/0, Mn = 140 × 10³ g mol⁻¹, Mw/Mn = 1.6, and Tm = 134 °C (68% crystallinity); entry 10 gave 0.6 mol% CO by IR (1.4 mol% by ¹³C NMR), I/NA/A = 27/33/39, Mn = 154 × 10³ g mol⁻¹, and Tm = 134 °C.
- The keto-modified polyethylenes reached high molecular weights up to Mw ~400,000 g mol⁻¹ and Mn ~220,000 g mol⁻¹, in contrast to prior ethylene–CO copolymerizations that yielded low molecular weight brittle waxes with Mn ≤ 3,000 g mol⁻¹.
- HDPE materials properties were retained: WAXS diffractograms were virtually identical to HDPE, melting/crystallization points were virtually unaltered, and injection-molded test bars showed ductile tensile behavior comparable to commercial HDPE. Reported tensile values were E = 995 MPa and σy = 29 MPa, compared with literature HDPE E = 900 MPa and σy = 27 MPa, and LDPE E = 240 MPa and σy = 12 MPa.
- CO appeared to suppress chain transfer and branching: endgroup analysis showed only olefinic endgroups also found in homopolyethylenes, and copolymers showed complete absence of branches compared with ethylene homopolymers; catalysts were stable for hours in CO copolymerizations.
Methods
- Polymerization experiments screened neutral Ni(II) catalyst precursors: salicylaldiminato 1 and phosphinophenolato complexes 2–8 with bulky substituents. Table 1 conditions were typically 10 µmol precatalyst, 100 mL toluene, 500 rpm, 50–120 °C, 5–40 bar ethylene, CO in feed 0.2–2.6 mol%, and 10–240 min; selected entries used 5 µmol precatalyst, 200 mL toluene, and 0.05 atm CO introduced before ethylene.
- Microstructure was analyzed by ¹³C NMR using ¹³CO copolymers, with 1D and 2D NMR and IR spectroscopy; CO incorporation was determined by IR and by ¹³C NMR. Molecular weights were measured by GPC in 1,2-dichlorobenzene at 160 °C via universal calibration against polystyrene standards; thermal data by DSC second heating; solid-state structure by WAXS; mechanical properties by tensile tests on injection-molded bars.
- Mechanistic features were probed by comparing polymer composition and yield over time, comparing copolymerization with ethylene homopolymerization, and analyzing polymer endgroups.
Limitations
- The paper does not include a dedicated Limitations section. Stated limitations include: copolymerization yields and average activities were lowered compared with ethylene homopolymerization; efficient copolymerization with catalyst 2 required ca. 100 °C; higher polymerization temperatures decreased CO incorporation and were necessary to achieve non-alternation; catalyst 1 had limited temperature stability and formed only alternating polyketone even at elevated temperature.
- Evident from the data: non-alternating products were obtained only at high E/CO ratios on the order of 100 and generally low CO feed (many useful entries at 0.2–0.6 mol% CO in feed); higher CO feed often gave alternating polyketone or very low yields. Several catalyst precursors (e.g., 1, 3, 4, 6, 8 under tested conditions) gave alternating polyketone or negligible activity.
- The paper presents perspectives for photolytic and oxidative chain breakdown but does not report degradation or long-term environmental persistence data for these specific materials.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



Verification
Claims the paper makes
0 Valid · 2 Not valid · 5 Not checked · 28 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At given initial reaction conditions, the composition of the formed polymer does not vary significantly with increasing reaction time and increasing polymer yield (entries 2 to 4 and 10 to 12).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Also, melting and crystallization points are virtually unaltered (Fig. 3c).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Catalysts are stable for hours in CO copolymerizations (entries 2 to 4).”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58) > Mechanistic features of the catalytic polymerization.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Indeed, tensile tests on injection molded test bars show a ductile behavior that compares to commercial HDPE (Fig. 3d).”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“We report how the long-sought non-alternating catalytic copolymerization of ethylene and CO can be achieved with Ni(II) catalysts.”
§ Polyethylene Materials with In-Chain Ketones from Catalytic Copolymerization > Introduction
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
13 more claims
Create a free account to see all 35 claims and every source verdict.
- It may state two separate claims as one. 16
- Probably not a substantial claim. 2
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Insertion of ketones into PE through the copolymerization of ethylene with carbon monoxide results in photodegradable PE derivatives that can break down to smaller fragments but falls short of creating a circular plastics lifecycle”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [18]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“at desirable values of the CO incorporation of ca. 1 %, the majority of keto groups are not alternating, and moreover amongst these the isolated keto groups prevail.”
§ Cat.T [°C] p [bar] t [min] CO in feed [mol%] b yield [g] TOF c χ d [mol%] I / NA / A e [mol-%] M n f [10 3 g mol -1 ] M w /M n f T m [°C] (% Cryst) g 1 1 50 10 60 0.2 0.06 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 243 i 2 2 100 5 10 0.2 0.80 15.6 0.3 (0.4) 69 / 11 / 20 54 1.7 133 (71) 3 2 100 5 60 0.2 2.07 7.41 0.3 (0.4) 70 / 22 / 8 102 1.5 135 (66) 4 2 100 5 120 0.2 4.26 7.61 0.3 (0.3) 79 / 21 / 0 140 1.6 134 (68) 5 2 110 5 60 0.2 1.07 3.81 0.5 (0.5) 61 / 27 / 12 84 1.7 133 (65) 6 2 120 5 30 0.2 0.06 0.41 1.7 (1.7) 31 / 49 / 20 3 8.9 110 (65) 7 2 100 40 10 0.2 1.20 23.4 1.1 (2.7) 9 / 37 / 54 42 2.9 133 (68) 8 2 70 40 90 0.2 0.05 0.12 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62) 10 2 100 10 60 0.6 2.35 8.39 0.6 (1.4) 27 / 33 / 39 154 1.9 134 (63) 11 2 100 10 120 0.6 3.01 5.38 0.6 (1.3) 27 / 27 / 46 210 1.8 138 (61) 12 2 100 10 240 0.6 3.31 2.95 0.6 (1.0) 43 / 33 / 24 216 1.8 136 (60) 13 2 100 5 120 2.6 0.06 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 230 i 14 5 100 5 120 2.6 0.03 0.06 50 h 0 / 0 / 100 h n.d.h n.d.h 228 i 15 5 100 5 60 0.2 1.04 3.73 0.4 (0.4) 62 / 29 / 9 88 1.6 133 (70) 16 3 100 5 120 0.6 0.05 0.08 50 h 0 / 0 / 100 h n.d.h n.d.h 229 i 17 4 100 5 120 0.6 1.13 2.02 1.0 (1.4) 21 / 29 / 49 60 1.7 133 (69) 18 5 100 5 120 0.6 0.26 0.46 3.7 (4.4) 28 / 34 / 38 84 1.7 134 (63) 19 6 100 5 120 0.6 0.44 0.79 1.6 (3.0) 7 / 34 / 59 45 1.6 133 (69) 20 7 100 5 120 0.6 0.82 1.47 1.1 (2.5) 18 / 33 /49 90 1.7 135 (67) 21 8 100 5 120 0.6 0.01 0.02 50 h 0 / 0 / 100 h n.d.h n.d.h 232 i 22 1 90 40 60 0.1 m 0.05 0.2 50 h 0 / 0 / 100 h n.d.h n.d.h 240 i 23 k 2 100 5 20 -10.8 231.2 --17 1.9 131 (71) 24 k 2 70 10 10 -3.16 135.1 --548 2.3 138 (58)
“9 2 100 5 120 0.6 1.98 3.53 0.8 (1.1) 32 / 36 / 32 147 1.8 135 (62)”
Citations
Cites
Palladium-Catalyzed Alternating Copolymerization of Alkenes and Carbon Monoxide
Drent, E., & Budzelaar, P. H. M. (1996) · Chemical Reviews · doi:10.1021/cr940282j · Cited by 974
Coordination−Insertion Copolymerization of Fundamental Polar Monomers
Nakamura, A., Ito, S., & Nozaki, K. (2009) · Chemical Reviews · doi:10.1021/cr900079r · Cited by 907
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
Drent, E., Van Broekhoven, J. A. M., & Doyle, M. J. (1991) · Journal of Organometallic Chemistry · doi:10.1016/0022-328x(91)80176-k · Cited by 528
The physics of polymers: concepts for understanding their structures and behavior
(1997) · Choice Reviews Online · doi:10.5860/choice.34-2811 · Cited by 434
Keim, W. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201305308 · Cited by 426
Novel Coordination of (Benzoylmethylene)triphenylphosphorane in a Nickel Oligomerization Catalyst
Keim, W., Kowaldt, F. H., Goddard, R., & Krüger, C. (1978) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197804661 · Cited by 422
Exploring Ethylene/Polar Vinyl Monomer Copolymerizations Using Ni and Pd α-Diimine Catalysts
Chen, Z., & Brookhart, M. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00225 · Cited by 405
Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers
Tan, C., & Chen, C. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814634 · Cited by 402
Mechanistic Studies of the Palladium(II)-Catalyzed Copolymerization of Ethylene with Carbon Monoxide
Rix, F. C., Brookhart, M., & White, P. S. (1996) · Journal of the American Chemical Society · doi:10.1021/ja953276t · Cited by 345
Research works printed but not linked: 2
- Press release by Hyosung of May 5 2016: Hyosung introduces the polyketone brand ‘POKETONE™’ to the global market (retrieved June 8 2021 from www.poketone.com).
- Ash. C. E. Ash, C. E.; Waters, D. G.; Smaardijk, A. A. Syn- thesis and stability of aliphatic polyketones. Annu. Tech. Conf. - Soc. Plast. Eng. 1995, 53, 2319-2325.
Cited by
Items 101–200 of 284
Domyati, D., El-Morsy, M. A., Awwad, N. S., Ibrahium, H. A., Alqahtani, M. S., & Menazea, A. A. (2024) · Optical Materials · doi:10.1016/j.optmat.2024.114827 · Cited by 14
Synthesis of Long‐Chain Polyamides via Main‐Chain Modification of Polyethyleneketones
Lu, Y., Takahashi, K., Zhou, J., Roopsung, N., Nakagawa, S., Yoshie, N., & Nozaki, K. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202410849 · Cited by 16
Sun, B., & Liu, B. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00580 · Cited by 15
On-Demand Nonalternating Copolymerization Enables Upcycling of Mixed Polyethylene and Nylon Plastics
Zhang, W., Chen, S., Lu, X., & Liu, Y. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c09549 · Cited by 16
Polyolefin vitrimers bearing acetoacetate functionality
Wang, Z., Liu, Y., Pang, W., Chen, A., & Chen, M. (2024) · Science China Chemistry · doi:10.1007/s11426-024-2070-3 · Cited by 15
Polyethyleneketones with Controlled Spacer Units: Synthesis, Characterization, and Photodegradation
Nobis, M., Takahashi, K., Uchida, J., Nakagawa, S., Yoshie, N., Kato, T., & Nozaki, K. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c01664 · Cited by 16
Chen, S., Ren, B., Li, S.-H., Song, Y., Jiao, S., Zou, C., Chen, C., Lu, X., & Liu, Y. (2022) · Angewandte Chemie · doi:10.1002/ange.202204126 · Cited by 12
Wang, F., Pan, L., Тuskaev, V. А., Gagieva, S., & Li, Y. (2023) · Chinese Journal of Polymer Science · doi:10.1007/s10118-023-3044-x · Cited by 12
The synthesis of hyperbranched ethylene oligomers by nickel catalysts with oxazole structure
Nie, N., Wang, Y., Tan, C., Chen, M., & Peng, D. (2023) · Journal of Catalysis · doi:10.1016/j.jcat.2023.115164 · Cited by 13
Waxes from Long-Chain Aliphatic Difunctional Monomers
Eck, M., Stoltze, C., & Mecking, S. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c06951 · Cited by 12
Self-citationSix Atom Elongated Radical Polymerization Enabled by 1,5-Hydrogen Atom Transfer
Chen, Y., Yue, C., An, B., Liu, S., Zhou, L., Ji, C., & Li, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00250 · Cited by 14
Farkas, V., Albrecht, P., Erdélyi, Á., Nagyházi, M., Csutorás, B., Turczel, G., Miskolczi, N., Bobek‐Nagy, J., Osterthun, O., Klankermayer, J., et al. (2024) · Green Chemistry · doi:10.1039/d4gc03912b · Cited by 14
Lu, P.-Y., Ningsih, L. A., Heksa, A. C., Hu, C., Chen, W., & Chiu, Y. (2025) · Polymer Journal · doi:10.1038/s41428-024-01009-1 · Cited by 14
Machine Learning for Developing Sustainable Polymers
Huo, Z., Xie, X., & Tong, R. (2025) · Chemistry - A European Journal · doi:10.1002/chem.202500718 · Cited by 16
Repurposing Mitsunobu Reactions as a Generic Approach toward Polyethylene Derivatives
Zhang, Y., Wang, T., Bai, J., et al. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00689 · Cited by 12
Kong, Y., Qian, S., Zhang, Z., Cheng, H., & Liu, Y. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26267 · Cited by 12
Palladium-catalyzed synthesis of oil-based functionalized polyolefins
Chen, J., Wang, W., Pan, Y., Peng, D., Li, Y., & Zou, C. (2023) · Polymer Chemistry · doi:10.1039/d3py00012e · Cited by 12
A Facile and Scalable α‐Diimine Platform for Nickel‐Catalyzed Ethylene Polymerization
Yang, J., Tang, Z., Zhang, Y., & Jian, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202512735 · Cited by 11
Raman, S. K., Zhao, J., Puthiyaveettil, M. T., Zhou, F., Romano, D., & Rastogi, S. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01617 · Cited by 11
Zhang, W., Han, S., Li, S.-H., Hao, X.-Y., Lu, X., & Liu, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00094 · Cited by 11
Upconversion Phosphor-Driven Photodegradation of Plastics
Deng, S., Cao, R., Wang, X., Zhou, Y., Liang, J., Tang, H., Feng, X., Yang, S., Shangguan, Y., Li, Y., et al. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c04138 · Cited by 11
Circular Cross-Linked Polyethylene Enabled by In-Chain Ketones
Morgen, T. O., & Mecking, S. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00660 · Cited by 12
Self-citationJiao, S., Zhang, W., Fan, M.-M., Li, S.-H., Chen, S., Lu, X., & Liu, Y. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.4c12213 · Cited by 13
Yin, H., Jian, S., Feng, X., et al. (2024) · Organic Chemistry Frontiers · doi:10.1039/d4qo00280f · Cited by 11
Baur, M., Habé, R., & Mecking, S. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00313 · Cited by 13
Self-citationBie, Z., Li, B., Hu, J., et al. (2021) · Macromolecular Reaction Engineering · doi:10.1002/mren.202100047 · Cited by 11
Lo, S.-Y., Folster, C. P., Harkins, R. P., Anderson, R. J., Lien, Y., Chiu, H., Carpenter, A. E., & Tonks, I. A. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c03984 · Cited by 13
A new strategy to achieve the recycling of plastic waste by catalysis under mild conditions
Han, Z., Yan, Y., Pang, X., Wang, B., & Sun, D. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.124505 · Cited by 11
Xie, Y., YANG, F. ‐., Miao, Q., et al. (2024) · Applied Organometallic Chemistry · doi:10.1002/aoc.7469 · Cited by 10
Zhu, L., Li, J., Chen, W., Ziegler, C. J., Takahashi, K., Nozaki, K., & Li, J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01691 · Cited by 11
Facile Synthesis of Polyhydroperoxides from Ethylene and Carbon Monoxide
Jung, H., Roshandel, H., Wong, Y.-P., & Diaconescu, P. L. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c05143 · Cited by 10
Li, S.-H., Pan, R., Ren, B., Jian-Wei, Y., Kang, X., & Liu, Y. (2022) · Chinese Journal of Chemistry · doi:10.1002/cjoc.202200450 · Cited by 10
Toughening Poly(3-hydroxybutyrate) by Using Catalytic Carbonylative Terpolymerization of Epoxides
Yang, J.-C., Yang, J., Zhang, T.-Y., Li, X.-J., Lu, X., & Liu, Y. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02438 · Cited by 11
Catalytic Synthesis of Polyolefin Elastomer Using Unsymmetrical α-Diimine Nickel Catalyst★
Wang, Z., Chen, M., & Chen, C. (2023) · 化学学报 · doi:10.6023/a23040162 · Cited by 9
Tian, W., Kong, X. Y., Dai, S., et al. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c03435 · Cited by 9
Vũ, N. Đ., Ivanchenko, O., Baffie, F., Guillaneuf, Y., Gigmès, D., Harrisson, S., Monteil, V., Destarac, M., & D’Agosto, F. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00085 · Cited by 9
Wang, Y., Li, C., Tan, C., & Chen, C. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202417849 · Cited by 9
Zhang, X.-H., Zhao, Y., Wang, C., & Tang, S. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3285-y · Cited by 11
Specific Ion Effects on the Enzymatic Degradation of Polyester Films
Zhang, J., Zhu, J., Hua, Z., & Liu, G. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2869-z · Cited by 8
Precision Synthesis of Tunable Polyallenamers from “Masked” Precursors
Galan, N. J., & Brantley, J. N. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c01968 · Cited by 9
Ethylene (Co)Polymerization Catalyzed by α-Diimine Nickel Catalysts Bearing Ether Substituents
Yue, L., Chen, Y., Chen, A., & Chen, C. (2025) · Polymer science & technology. · doi:10.1021/polymscitech.5c00048 · Cited by 10
Recent developments in recycling technologies for polymeric plastics
Wang, Z., Fang, E., Chen, L., Fan, Z., & Song, S. (2025) · Polymer Chemistry · doi:10.1039/d5py01031d · Cited by 11
Jiao, S., Li, S.-H., Zhang, M., Ren, B., Chen, S., & Liu, Y. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113007 · Cited by 9
Gao, S., Su, L., Lu, X., Yang, H., Zou, J., Yang, X., Tang, S., & Liu, J. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202506438 · Cited by 9
Zheng, H., Wang, J., Qiu, Z., Feng, C., Zhou, H., Tu, G., & Gao, H. (2025) · Molecules · doi:10.3390/molecules30112402 · Cited by 7
Impact of Carbonyl Group Incorporation in Semicrystalline High-Density Polyethylene
Anuar, A., Edalat, A., Ringelhan, L., Yu, Q., Baur, M., Petzold, A., Mecking, S., Thurn‐Albrecht, T., & Saalwächter, K. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02288 · Cited by 8
Self-citationPuthiyaveettil, M. T., Raman, S. K., Zhao, J., & Rastogi, S. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01366 · Cited by 9
Photo-Iniferter RAFT Synthesis of Versatile, Nonalternating Poly(acrylate-co-isocyanides)
Čamdžić, L., & Stache, E. E. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01610 · Cited by 7
Lin, F., & Mecking, S. (2022) · Angewandte Chemie · doi:10.1002/ange.202203923 · Cited by 6
Self-citationCopolymerization of ethylene with non-vinyl polar monomers
Nozaki, K. (2022) · Proceedings of the Japan Academy Series B · doi:10.2183/pjab.98.014 · Cited by 6
Nickel Catalyst With Excellent Thermal Stability for Ethylene Polymerization and Copolymerization
Tian, W., Guan, H., Wang, W., Kong, X. Y., Pang, W., Wang, Q., Wang, F., & Zou, C. (2025) · Applied Organometallic Chemistry · doi:10.1002/aoc.70063 · Cited by 6
Synthesis and Chemical Recovery of Castor Oil-Based Poly(ester amides) with PE-Like Performance
Liu, C., Ding, Y., Cai, L., Wu, M., & Wang, Z. (2025) · ACS Omega · doi:10.1021/acsomega.4c04503 · Cited by 6
Nowicka, W., Różański, A., Pasha, F. A., Jasińska-Walc, L., & Duchateau, R. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01495 · Cited by 7
Zhang, X. H., Miao, Y., & Tang, S. (2025) · ChemSusChem · doi:10.1002/cssc.202501601 · Cited by 6
Recyclable Biomass-Derived Polyethylene-like Plastics
Wang, Z., Fang, E., Chen, L., Guo, Y., Fan, Z., & Song, S. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01976 · Cited by 9
A Polymer Backbone Editing Strategy for Property Enhancement
Cai, W. J., Wang, W., Wang, F., Chen, C., & Tan, C. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.5c21829 · Cited by 8
Baur, M., Mast, N. K., Brahm, J. P., Habé, R., Morgen, T. O., & Mecking, S. (2023) · Angewandte Chemie · doi:10.1002/ange.202310990 · Cited by 6
Self-citationBalancing Degradability and Mechanical Strength in Keto Modified Polyethylene through Hydrogen Bonds
Li, K., Chen, X., Pan, Y., Min, B., Ye, E., Li, S., Li, Z., & Loh, X. J. (2024) · ACS Materials Letters · doi:10.1021/acsmaterialslett.4c00461 · Cited by 6
Ma, M., & Dai, S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c02429 · Cited by 6
Nachhaltiges Design von Struktur‐ und Funktionspolymeren für die Kreislaufwirtschaft
von Vacano, B., Mangold, H. S., Vandermeulen, G. W. M., Battagliarin, G., Hofmann, M., Bean, J., & Künkel, A. (2022) · Angewandte Chemie · doi:10.1002/ange.202210823 · Cited by 8
Ligand pre-inserted α-diimine palladium catalysts and mechanism studies in olefin polymerization
Liu, Y., Yang, G., Li, C., Tan, C., & Chen, M. (2023) · Polymer Chemistry · doi:10.1039/d3py01011b · Cited by 6
Tian, W., Li, C., Tan, C., & Chen, M. (2024) · Polymer Chemistry · doi:10.1039/d3py01266b · Cited by 6
Hou, Y., Li, J., 田国峰, Tian, R., & Lu, C. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162951 · Cited by 6
Yang, D., Zhang, Y., & Jian, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202520230 · Cited by 6
Photo‐, Thermal‐, and Electro‐Responsive Polyolefin‐Based Actuators
Wang, Q., Sun, H., Zou, C., & Chen, C. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.202523449 · Cited by 7
Mechanically Triggered Chemical Recyclable Polyethylene‐Like Materials
Xu, M., Liu, P. Q., Chen, C., & Choi, T. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.202522618 · Cited by 7
“For instance, keto-PE from the nonalternating copolymerization of ethylene and carbon monoxide undergoes degradation into smaller fragments upon UV irradiation [ 31–33 ] or main-chain editing [ 34, 35 ].”
Ma, Z., Nie, N., Pang, W., et al. (2024) · ChemCatChem · doi:10.1002/cctc.202400619 · Cited by 5
Synthesis of Long‐Chain Polyamides via Main‐Chain Modification of Polyethyleneketones
Lu, Y., Takahashi, K., Zhou, J., Roopsung, N., Nakagawa, S., Yoshie, N., & Nozaki, K. (2024) · Angewandte Chemie · doi:10.1002/ange.202410849 · Cited by 5
Cumene-mediated aerobic oxidation of polyethylene
Che, Y., Wu, Y., Zheng, Y., Huang, H., Hu, Q., & Niu, Z. (2025) · Green Chemistry · doi:10.1039/d5gc00034c · Cited by 5
Cocatalyst Effect in Transition Metal Catalyzed Ethylene Polymerization and Copolymerization
Chen, A., Ma, Z., Pan, Y., Chen, M., & Zou, C. (2022) · ChemCatChem · doi:10.1002/cctc.202200578 · Cited by 6
Outer‐Shell Self‐Supported Nickel Catalysts for the Synthesis of Polyolefin Composites
Li, J., Peng, D., Tan, C., & Chen, C. (2023) · Angewandte Chemie · doi:10.1002/ange.202300359 · Cited by 5
Designing easily accessible tridentate hafnium catalysts for ethylene/1-octene copolymerization
Yang, G., Zhao, Z., Ma, Z., Li, C., & Zou, C. (2024) · Polymer · doi:10.1016/j.polymer.2024.126699 · Cited by 6
Liu, Y., Wang, C., Mu, H., & Jian, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202404392 · Cited by 6
Nickel catalysts for the preparation of functionalized polyolefin materials
Chen, M., & Chen, C. (2021) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2021-1187 · Cited by 5
Li, S.-S., Pan, J., Chen, X.-L., Xu, J., Li, Z.-L., & Cheng, C. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113290 · Cited by 4
Qi, Y., Lv, H., Huang, Q., & Pan, G. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70009 · Cited by 8
A Facile and Scalable α‐Diimine Platform for Nickel‐Catalyzed Ethylene Polymerization
Yang, J., Tang, Z., Zhang, Y., & Jian, Z. (2025) · Angewandte Chemie · doi:10.1002/ange.202512735 · Cited by 11
Zhang, D., Zhang, R., Hu, X., Li, C., Wang, F., & Chen, M. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01521 · Cited by 6
Preparation of bimodal polyethylene with different branching densities by a co-anchoring strategy
Zhao, C., Dai, S., Yu, H., Pang, W., Wang, F., Liao, D., Wang, W., & Zou, C. (2025) · Polymer Chemistry · doi:10.1039/d5py00110b · Cited by 4
Impact of Degradable Linkages on the Crystallization Behaviors of Polyethylene Mimics
Qian, J., Li, X., Tang, C., & Qiang, Z. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02706 · Cited by 5
Chen, S.-Y., Yu, Y. H., Lu, X., & Liu, Y. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c03062 · Cited by 4
Chen, Y., Wang, W., Chen, J., & Zou, C. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02954 · Cited by 5
Yang, G., Liao, D., Li, P., Chen, M., & Li, C. (2024) · Polymer · doi:10.1016/j.polymer.2024.127000 · Cited by 4
Review of the Polymeric Material Composite, Optimization for Industrial Application
CRACIUN, D. C., & Peter, I. (2024) · Acta Marisiensis Seria Technologica · doi:10.62838/amset-2024-0008 · Cited by 4
Xu, S., Xu, H., Lei, M., Hu, X., Li, P., Li, C., Chen, A., & Wang, F. (2025) · Polymer · doi:10.1016/j.polymer.2025.128367 · Cited by 4
Kuenen, M. K., & Hillmyer, M. A. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00313 · Cited by 4
Heinicke, J. (2023) · Chemistry - A European Journal · doi:10.1002/chem.202302740 · Cited by 4
Functional Polyolefins and Composites
Tan, C., Si, G., Zou, C., & Chen, C. (2025) · Angewandte Chemie · doi:10.1002/ange.202424529 · Cited by 18
Gao, S., Su, L., Lu, X., Yang, H., Zou, J., Yang, X., Tang, S., & Liu, J. (2025) · Angewandte Chemie · doi:10.1002/ange.202506438 · Cited by 4
Bie, Z., Yao, Z., Jie, S., et al. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c02927 · Cited by 4
Study on Rapid Detection Method for Degradation Performance of Polyolefin-Based Degradable Plastics
Zhou, J., Li, L., Wang, D., Wang, L., Zhang, Y., & Feng, S. (2022) · Polymers · doi:10.3390/polym15010183 · Cited by 6
Wang, Y., Li, C., Tan, C., & Chen, C. (2024) · Angewandte Chemie · doi:10.1002/ange.202417849 · Cited by 3
Zhang, Z., Lv, W., Li, M., Wang, Y., Wang, X., & Tao, Y. (2025) · Nature Communications · doi:10.1038/s41467-025-59834-8 · Cited by 5
Degradable Polyketone Thermoplastic Elastomers with Biomass Sourced Composition
Chen, S., Zhang, M., Li, S.-H., Zhang, W., Lu, X., & Liu, Y. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202507976 · Cited by 4
Degradable Polyketone Thermoplastic Elastomers with Biomass Sourced Composition
Chen, S., Zhang, M., Li, S.-H., Zhang, W., Lu, X., & Liu, Y. (2025) · Angewandte Chemie · doi:10.1002/ange.202507976 · Cited by 3
Xue, H., Xu, S., Wang, F., & Chen, C. (2025) · 化学学报 · doi:10.6023/a25080288 · Cited by 4
Practical, Large-Scale Preparation of Ni(tmeda)( o -tol)Cl
John, M. E., Foster, D., Moggach, S. A., et al. (2024) · Organic Process Research & Development · doi:10.1021/acs.oprd.4c00408 · Cited by 3
Plastic in the environment: Properties, types, and applications
Shah, K. R., Maharjan, G., Baniya, S., Mainali, B., Treichel, H., & Paudel, S. R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-23599-3.00017-4 · Cited by 8
Xiong, S., Hong, A., Bailey, B. C., Spinney, H. A., Senecal, T. D., Bailey, H., & Agapie, T. (2022) · Angewandte Chemie · doi:10.1002/ange.202206637 · Cited by 4
The synthesis and properties research of functionalized polyolefins
Ma, Z., Ji, M., Pang, W., Si, G., & Chen, M. (2022) · New Journal of Chemistry · doi:10.1039/d2nj04335a · Cited by 3
Metadata
- Authors
- Baur, M., Lin, F., Morgen, T. O., Odenwald, L., & Mecking, S.
- Affiliations
- University of Konstanz (DE)
- Corresponding author
- Mecking, Stefan
- Venue
- Science
- Published
- 2021-10-29
- Volume
- 374
- Issue
- 6567
- Pages
- 604-607
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W3211073624
- Semantic Scholar
- 56143bd9bef2a397e2c0692f3981fe7fe06e9634
- Cited by
- 287
- References
- 46
- Citations by year
- 2026: 60 · 2025: 72 · 2024: 65 · 2023: 40 · 2022: 42 · 2021: 8
- FWCI
- 14.88
- Type
- journal article
- Language
- en
- Open access
- green
- doi.org
- Licence
- cc-by-nc-nd
- Locations
- Science (publishedVersion)
- ChemRxiv (submittedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- Figshare (submittedVersion, cc-by-nc-nd)
- KOPS (University of Konstanz) (submittedVersion)
- Funders
- H2020 European Research Council (832480)
- Topics
- Physical Sciences › Chemistry › Organic Chemistry › Organometallic Complex Synthesis and Catalysis
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- polyethylene, high-density polyethylene, tensile properties, injection molding
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.