The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Design and printing of proprioceptive three-dimensional architected robotic metamaterials
Abstract
Advances in additive manufacturing techniques have enabled the creation of stimuli-responsive materials with designed three-dimensional (3D) architectures. Unlike biological systems in which functions such as sensing, actuation, and control are closely integrated, few architected materials have comparable system complexity. We report a design and manufacturing route to create a class of robotic metamaterials capable of motion with multiple degrees of freedom, amplification of strain in a prescribed direction in response to an electric field (and vice versa), and thus, programmed motions with self-sensing and feedback control. These robotic metamaterials consist of networks of piezoelectric, conductive, and structural elements interwoven into a designed 3D lattice. The resulting architected materials function as proprioceptive microrobots that actively sense and move.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Self-citationPrinting ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Review: liquid phase sintering
German, R. M., Suri, P., & Park, S. J. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3008-0 · Cited by 1,444
Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., & Wegener, M. (2017) · Science · doi:10.1126/science.aao4640 · Cited by 1,103
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Self-citationDamage-tolerant architected materials inspired by crystal microstructure
Pham, M.-S., Liu, C., Todd, I., & Lertthanasarn, J. (2019) · Nature · doi:10.1038/s41586-018-0850-3 · Cited by 665
Materials that couple sensing, actuation, computation, and communication
McEvoy, M. A., & Correll, N. (2015) · Science · doi:10.1126/science.1261689 · Cited by 650
Overvelde, J. T. B., de Jong, T. A., Shevchenko, Y., Becerra, S. A., Whitesides, G. M., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2016) · Nature Communications · doi:10.1038/ncomms10929 · Cited by 482
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Self-citationHan, M., Wang, H., Yang, Y., Liang, C., Bai, W., Yan, Z., Li, H., Xue, Y., Wang, X., Akar, B., et al. (2019) · Nature Electronics · doi:10.1038/s41928-018-0189-7 · Cited by 469
Rational design of reconfigurable prismatic architected materials
Overvelde, J. T. B., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2017) · Nature · doi:10.1038/nature20824 · Cited by 362
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
Chen, Z., Song, X., Lei, L., Chen, X., Fei, C., Chiu, C. T., Qian, X., Ma, T., Yang, Y., Shung, K., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.048 · Cited by 277
High-Performance Piezoelectric Crystals, Ceramics, and Films
Trolier-McKinstry, S., Zhang, S., Bell, A. J., & Tan, X. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070616-124023 · Cited by 249
Dudukovic, N. A., Fong, E. J., Gemeda, H. B., DeOtte, J. R., Cerón, M. R., Moran, B. D., Davis, J. T., Baker, S. E., & Duoss, E. B. (2021) · Nature · doi:10.1038/s41586-021-03603-2 · Cited by 238
Flexible 3D Architectured Piezo/Thermoelectric Bimodal Tactile Sensor Array for E‐Skin Application
Zhu, P., Wang, Y., Wang, Y., Mao, H., Zhang, Q., & Deng, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001945 · Cited by 229
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
Robotic surfaces with reversible, spatiotemporal control for shape morphing and object manipulation
Liu, K., Hacker, F., & Daraio, C. (2021) · Science Robotics · doi:10.1126/scirobotics.abf5116 · Cited by 184
High speed locomotion for a quadrupedal microrobot
Baisch, A. T., Ozcan, O., Goldberg, B., Ithier, D., & Wood, R. J. (2014) · The International Journal of Robotics Research · doi:10.1177/0278364914521473 · Cited by 176
Charge-programmed three-dimensional printing for multi-material electronic devices
Hensleigh, R., Cui, H., Xu, Z., Massman, J., Yao, D., Berrigan, J., & Zheng, X. (2020) · Nature Electronics · doi:10.1038/s41928-020-0391-2 · Cited by 166
Self-citationStructurally Efficient Three-dimensional Metamaterials with Controllable Thermal Expansion
Xu, H., & Pasini, D. (2016) · Scientific Reports · doi:10.1038/srep34924 · Cited by 153
Piezoelectric Sensors and Actuators
Rupitsch, S. J. (2018) · Topics in mining, metallurgy and materials engineering · doi:10.1007/978-3-662-57534-5 · Cited by 145
3D Printing of BaTiO3 Piezoelectric Ceramics for a Focused Ultrasonic Array
Cheng, J. H., Chen, Y., Wu, J., Ji, X., & Wu, S. (2019) · Sensors · doi:10.3390/s19194078 · Cited by 106
HAMR3: An autonomous 1.7g ambulatory robot
Baisch, A. T., Heimlich, C., Karpelson, M., & Wood, R. J. (2011) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2011.6095063 · Cited by 101
3D-Printing Piezoelectric Composite with Honeycomb Structure for Ultrasonic Devices
Zeng, Y., Jiang, L., Sun, Y., Yang, Y., Quan, Y., Wei, S., Lu, G., Li, R., Rong, J., Chen, Y., et al. (2020) · Micromachines · doi:10.3390/mi11080713 · Cited by 93
Cui, H., Hensleigh, R. M., Chen, H., & Zheng, X. R. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.11 · Cited by 89
Self-citationA piezoelectric triaxial accelerometer
Scheeper, P. R., Gulløv, J. O., & Kofoed, L. M. (1996) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/6/1/032 · Cited by 74
Design of centimeter-scale inchworm robots with bidirectional claws
Lee, D., Kim, S., Park, Y., & Wood, R. J. (2011) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2011.5980458 · Cited by 52
A fast mesoscale quadruped robot using piezocomposite actuators
Ho, T., & Lee, S. (2012) · Robotica · doi:10.1017/s0263574712000112 · Cited by 9
Cited by
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Self-citationLead zirconate titanate ceramics with aligned crystallite grains
Li, J., Qu, W., Daniels, J., Wu, H., Liu, L., Wu, J., Wang, M., Checchia, S., Yang, S., Lei, H., et al. (2023) · Science · doi:10.1126/science.adf6161 · Cited by 289
Self-citationJu, M., Dou, Z., Li, J.-W., Qiu, X., Shen, B., Zhang, D., Yao, F.-Z., Gong, W., & Wang, K. (2023) · Sensors · doi:10.3390/s23010543 · Cited by 277
3D-printed PEDOT:PSS for soft robotics
Li, J., Cao, J., Lu, B., & Gu, G. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00587-5 · Cited by 274
A compliant metastructure design with reconfigurability up to six degrees of freedom
Yang, H., Patel, D. K., Johnson, T., Zhong, K., Olson, G., Majidi, C., Islam, M. F., Zhang, T., & Yao, L. (2025) · Nature Communications · doi:10.1038/s41467-024-55591-2 · Cited by 17
Metadata
- Authors
- Cui, H., Yao, D., Hensleigh, R., Lu, H., Calderon, A., Xu, Z., Davaria, S., Wang, Z., Mercier, P., Tarazaga, P., & Zheng, X. (.
- Venue
- Science
- Published
- 2022-06-17
- Volume
- 376
- Issue
- 6599
- Pages
- 1287-1293
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4282975176
- Cited by
- 298
- References
- 28
- FWCI
- 23.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.