The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells
Open accessAbstract
Lewis base molecules that bind undercoordinated lead atoms at interfaces and grain boundaries (GBs) are known to enhance the durability of metal halide perovskite solar cells (PSCs). Using density functional theory calculations, we found that phosphine-containing molecules have the strongest binding energy among members of a library of Lewis base molecules studied herein. Experimentally, we found that the best inverted PSC treated with 1,3-bis(diphenylphosphino)propane (DPPP), a diphosphine Lewis base that passivates, binds, and bridges interfaces and GBs, retained a power conversion efficiency (PCE) slightly higher than its initial PCE of ~23% after continuous operation under simulated AM1.5 illumination at the maximum power point and at ~40°C for >3500 hours. DPPP-treated devices showed a similar increase in PCE after being kept under open-circuit conditions at 85°C for >1500 hours.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Self-citationChallenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Self-citationYuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Self-citationInactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Addressing the stability issue of perovskite solar cells for commercial applications
Meng, L., You, J., & Yang, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07255-1 · Cited by 778
Light-activated photocurrent degradation and self-healing in perovskite solar cells
Nie, W., Blancon, J.-C., Neukirch, A. J., Appavoo, K., Tsai, H., Chhowalla, M., Alam, M. A., Sfeir, M. Y., Katan, C., Even, J., et al. (2016) · Nature Communications · doi:10.1038/ncomms11574 · Cited by 743
Domanski, K., Roose, B., Matsui, T., Saliba, M., Turren-Cruz, S.-H., Correa-Baena, J.-P., Carmona, C. R., Richardson, G., Foster, J. M., De Angelis, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03352k · Cited by 717
Domanski, K., Alharbi, E. A., Hagfeldt, A., Grätzel, M., & Tress, W. (2018) · Nature Energy · doi:10.1038/s41560-017-0060-5 · Cited by 685
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08455-z · Cited by 588
deQuilettes, D. W., Koch, S., Burke, S., Paranji, R. K., Shropshire, A. J., Ziffer, M. E., & Ginger, D. S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00236 · Cited by 548
Self-citationYang, Z., Dou, J., Kou, S., Dang, J., Ji, Y., Yang, G., Wu, W., Kuang, D., & Wang, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910710 · Cited by 258
Fu, F., Pisoni, S., Jeangros, Q., Sastre-Pellicer, J., Kawecki, M., Paracchino, A., Moser, T., Werner, J., Andres, C., Duchêne, L., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02043h · Cited by 250
Self-citationShi, L., Young, T. L., Kim, J., Sheng, Y., Wang, L., Chen, Y., Feng, Z., Keevers, M. J., Hao, X., Verlinden, P. J., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07625 · Cited by 244
Surface Reconstruction of Halide Perovskites During Post-treatment
Tan, S., Huang, T., Yavuz, I., Wang, R., Weber, M. H., Zhao, Y., Abdelsamie, M., Liao, M. E., Wang, H.-C., Huynh, K., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c00757 · Cited by 240
Wang, J., Fu, W., Jariwala, S., Sinha, I., Jen, A. K.-Y., & Ginger, D. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02058 · Cited by 215
Self-citationMitigating ion migration in perovskite solar cells
Bi, E., Song, Z., Li, C., Wu, Z., & Yan, Y. (2021) · Trends in Chemistry · doi:10.1016/j.trechm.2021.04.004 · Cited by 191
Self-citationDuong, T., Mulmudi, H. K., Wu, Y., Fu, X. J., Shen, H., Peng, J. B., Wu, N., Nguyen, H. T., Macdonald, D., Lockrey, M., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06816 · Cited by 154
Chen, B., Song, J., Dai, X., Liu, Y., Rudd, P. N., Hong, X., & Huang, J. (2019) · Advanced Materials · doi:10.1002/adma.201902413 · Cited by 150
Self-citationMolecular Hinges Stabilize Formamidinium‐Based Perovskite Solar Cells with Compressive Strain
Shi, C., Song, Q., Wang, H., Ma, S., Wang, C., Zhang, X., Dou, J., Song, T., Chen, P., Zhou, H., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201193 · Cited by 129
Song, Z., Wang, C., Phillips, A. B., et al. (2018) · Sustainable Energy & Fuels · doi:10.1039/c8se00358k · Cited by 118
Self-citationInteraction engineering in organic–inorganic hybrid perovskite solar cells
Zhu, M., Li, C., Li, B., Zhang, J., Sun, Y., Guo, W., Zhou, Z., Pang, S., & Yan, Y. (2020) · Materials Horizons · doi:10.1039/d0mh00745e · Cited by 54
Self-citationImaging Real-Time Amorphization of Hybrid Perovskite Solar Cells under Electrical Biasing
Kim, M.-C., Ahn, N., Cheng, D., Xu, M., Ham, S.-Y., Pan, X., Kim, S. J., Luo, Y., Fenning, D. P., Tan, D. H. S., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01707 · Cited by 40
Surface reconstruction of tetragonal methylammonium lead triiodide
Seidu, A., Dvorak, M., Järvi, J., Rinke, P., & Li, J. (2021) · APL Materials · doi:10.1063/5.0067108 · Cited by 12
Cited by
Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands
Chen, H., Liu, C., Xu, J., Maxwell, A., Zhou, W., Yang, Y., Zhou, Q., Bati, A. S. R., Wan, H., Wang, Z., et al. (2024) · Science · doi:10.1126/science.adm9474 · Cited by 1,389
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Self-citationHighly efficient and stable perovskite solar cells via a multifunctional hole transporting material
Zhou, J., Tan, L., Liu, Y., Li, H., Liu, X., Li, M., Wang, S., Zhang, Y., Jiang, C., Hua, R., et al. (2024) · Joule · doi:10.1016/j.joule.2024.02.019 · Cited by 735
Self-citationHomogenized NiO x nanoparticles for improved hole transport in inverted perovskite solar cells
Yu, S., Xiong, Z., Zhou, H., Zhang, Q., Wang, Z., Ma, F., Qu, Z., Zhao, Y., Chu, X., Zhang, X., et al. (2023) · Science · doi:10.1126/science.adj8858 · Cited by 672
Self-citation
Metadata
- Authors
- Li, C., Wang, X., Bi, E., Jiang, F., Park, S. M., Li, Y., Chen, L., Wang, Z., Zeng, L., Chen, H., Liu, Y., Grice, C. R., Abudulimu, A., Chung, J., Xian, Y., Zhu, T., Lai, H., Chen, B., Ellingson, R. J., Fu, F., Ginger, D. S., Song, Z., Sargent, E. H., & Yan, Y.
- Venue
- Science
- Published
- 2023-02-17
- Volume
- 379
- Issue
- 6633
- Pages
- 690-694
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4321018137
- Cited by
- 677
- References
- 41
- FWCI
- 49.55
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.