The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Compositional texture engineering for highly stable wide-bandgap perovskite solar cells
Open accessAbstract
The development of highly stable and efficient wide-bandgap (WBG) perovskite solar cells (PSCs) based on bromine-iodine (Br–I) mixed-halide perovskite (with Br greater than 20%) is critical to create tandem solar cells. However, issues with Br–I phase segregation under solar cell operational conditions (such as light and heat) limit the device voltage and operational stability. This challenge is often exacerbated by the ready defect formation associated with the rapid crystallization of Br-rich perovskite chemistry with antisolvent processes. We combined the rapid Br crystallization with a gentle gas-quench method to prepare highly textured columnar 1.75–electron volt Br–I mixed WBG perovskite films with reduced defect density. With this approach, we obtained 1.75–electron volt WBG PSCs with greater than 20% power conversion efficiency, approximately 1.33-volt open-circuit voltage ( V oc ), and excellent operational stability (less than 5% degradation over 1100 hours of operation under 1.2 sun at 65°C). When further integrated with 1.25–electron volt narrow-bandgap PSC, we obtained a 27.1% efficient, all-perovskite, two-terminal tandem device with a high V oc of 2.2 volts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
Separable dual-space Gaussian pseudopotentials
Goedecker, S., Teter, M., & Hutter, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.1703 · Cited by 7,479
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Gaussian basis sets for accurate calculations on molecular systems in gas and condensed phases
VandeVondele, J., & Hutter, J. (2007) · The Journal of Chemical Physics · doi:10.1063/1.2770708 · Cited by 4,672
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
cp2k: atomistic simulations of condensed matter systems
Hutter, J., Iannuzzi, M., Schiffmann, F., & VandeVondele, J. (2014) · WIREs Computational Molecular Science · doi:10.1002/wcms.1159 · Cited by 3,008
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Self-citationPerovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Self-citationAll-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Defect-Assisted Photoinduced Halide Segregation in Mixed-Halide Perovskite Thin Films
Barker, A. J., Sadhanala, A., Deschler, F., Gandini, M., Senanayak, S. P., Pearce, P. M., Mosconi, E., Pearson, A. J., Wu, Y., Srimath Kandada, A. R., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00282 · Cited by 646
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Light-Induced Anion Phase Segregation in Mixed Halide Perovskites
Brennan, M. C., Draguta, S., Kamat, P. V., & Kuno, M. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01151 · Cited by 643
Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
Kim, D., Jung, H. J., Park, I. J., Larson, B. W., Dunfield, S. P., Xiao, C., Kim, J., Tong, J., Boonmongkolras, P., Ji, S. G., et al. (2020) · Science · doi:10.1126/science.aba3433 · Cited by 611
Self-citationMetal halide perovskite tandem and multiple-junction photovoltaics
Eperon, G. E., Hörantner, M. T., & Snaith, H. J. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0095 · Cited by 556
Huang, F., Dkhissi, Y., Huang, W., Xiao, M., Benesperi, I., Rubanov, S., Zhu, Y., Lin, X., Jiang, L., Zhou, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.015 · Cited by 547
Deng, Y., Van Brackle, C. H., Dai, X., Zhao, J., Chen, B., & Huang, J. (2019) · Science Advances · doi:10.1126/sciadv.aax7537 · Cited by 535
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Enabling Flexible All-Perovskite Tandem Solar Cells
Palmstrom, A. F., Eperon, G. E., Leijtens, T., Prasanna, R., Habisreutinger, S. N., Nemeth, W., Gaulding, E. A., Dunfield, S. P., Reese, M., Nanayakkara, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.009 · Cited by 493
Self-citationHigh efficiency perovskite quantum dot solar cells with charge separating heterostructure
Zhao, Q., Hazarika, A., Chen, X., Harvey, S. P., Larson, B. W., Teeter, G. R., Liu, J., Song, T., Xiao, C., Shaw, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10856-z · Cited by 488
Self-citationTidhar, Y., Edri, E., Weissman, H., Zohar, D., Hodes, G., Cahen, D., Rybtchinski, B., & Kirmayer, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505556s · Cited by 444
Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803699 · Cited by 435
Prospects for metal halide perovskite-based tandem solar cells
Wang, R., Huang, T., Xue, J., Tong, J., Zhu, K., & Yang, Y. (2021) · Nature Photonics · doi:10.1038/s41566-021-00809-8 · Cited by 409
Self-citationLi, C., Song, Z., Zhao, D., Xiao, C., Subedi, B., Shrestha, N., Junda, M. M., Wang, C., Jiang, C., Al‐Jassim, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803135 · Cited by 382
Self-citationShift Happens. How Halide Ion Defects Influence Photoinduced Segregation in Mixed Halide Perovskites
Yoon, S. J., Kuno, M., & Kamat, P. V. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00357 · Cited by 380
Perovskite/CIGS Tandem Solar Cells: From Certified 24.2% toward 30% and Beyond
Jošt, M., Köhnen, E., Al-Ashouri, A., Bertram, T., Tomšič, Š., Magomedov, A., Kasparavicius, E., Kodalle, T., Lipovšek, B., Getautis, V., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00274 · Cited by 376
Weiss, S., & Kassing, R. (1988) · Solid-State Electronics · doi:10.1016/0038-1101(88)90071-8 · Cited by 371
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.012 · Cited by 342
Self-citationDipolar cations confer defect tolerance in wide-bandgap metal halide perovskites
Tan, H., Che, F., Wei, M., Zhao, Y., Saidaminov, M. I., Todorović, P., Broberg, D., Walters, G., Tan, F., Zhuang, T., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05531-8 · Cited by 315
Tong, J., Jiang, Q., Ferguson, A. J., Palmstrom, A. F., Wang, X., Hao, J., Dunfield, S. P., Louks, A. E., Harvey, S. P., Li, C., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01046-1 · Cited by 284
Self-citationScalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates
Dai, X., Deng, Y., Van Brackle, C. H., Chen, S., Rudd, P. N., Xiao, X., Lin, Y., Chen, B., & Huang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903108 · Cited by 279
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Self-citationThe role of halide oxidation in perovskite halide phase separation
Kerner, R. A., Xu, Z., Larson, B. W., & Rand, B. P. (2021) · Joule · doi:10.1016/j.joule.2021.07.011 · Cited by 233
Self-citationWide-Bandgap Metal Halide Perovskites for Tandem Solar Cells
Tong, J., Jiang, Q., Zhang, F., Kang, S. B., Kim, D. H., & Zhu, K. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02105 · Cited by 224
Self-citationSubbiah, A. S., Isikgor, F. H., Howells, C. T., Bastiani, M. D., Liu, J., Aydın, E., Furlan, F., Allen, T. G., Xu, F., Zhumagali, S., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01297 · Cited by 214
Chen, C., Song, Z., Xiao, C., Zhao, D., Shrestha, N., Li, C., Yang, G., Yao, F., Zheng, X., Ellingson, R. J., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.069 · Cited by 196
Self-citationZhou, Y., Jia, Y., Fang, H., Loi, M. A., Xie, F., Gong, L., Qin, M., Lu, X., Wong, C., & Zhao, N. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803130 · Cited by 195
Grain-Size-Limited Mobility in Methylammonium Lead Iodide Perovskite Thin Films
Reid, O. G., Yang, M., Kopidakis, N., Zhu, K., & Rumbles, G. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00288 · Cited by 189
Self-citationChen, X., Lu, H., Li, Z., Zhai, Y., Ndione, P. F., Berry, J. J., Zhu, K., Yang, Y., & Beard, M. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01315 · Cited by 184
Self-citationMulti-cation perovskites prevent carrier reflection from grain surfaces
Saidaminov, M. I., Williams, K., Wei, M., Johnston, A., Quintero-Bermudez, R., Vafaie, M., Pina, J. M., Proppe, A. H., Hou, Y., Walters, G., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0602-2 · Cited by 162
Fully Air-Bladed High-Efficiency Perovskite Photovoltaics
Ding, J., Han, Q., Ge, Q., Xue, D., Ma, J., Zhao, B., Chen, Y., Liu, J., Mitzi, D. B., & Hu, J. (2018) · Joule · doi:10.1016/j.joule.2018.10.025 · Cited by 156
Enhancing Defect Tolerance and Phase Stability of High-Bandgap Perovskites via Guanidinium Alloying
Stoddard, R. J., Rajagopal, A., Palmer, R. L., Braly, I. L., Jen, A. K. ‐., & Hillhouse, H. W. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00576 · Cited by 136
Reduced Self-Doping of Perovskites Induced by Short Annealing for Efficient Solar Modules
Deng, Y., Ni, Z., Palmstrom, A. F., Zhao, J., Xu, S., Brackle, C. H. V., Xiao, X., Zhu, K., & Huang, J. (2020) · Joule · doi:10.1016/j.joule.2020.07.003 · Cited by 121
Self-citationMathew, P. S., Samu, G. F., Janáky, C., & Kamat, P. V. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00925 · Cited by 110
Tong, G., Chen, T., Li, H., Song, W., Chang, Y., Liu, J., Yu, L., Xu, J., Qi, Y., & Jiang, Y. (2019) · Solar RRL · doi:10.1002/solr.201900030 · Cited by 103
Globularity‐Selected Large Molecules for a New Generation of Multication Perovskites
Gholipour, S., Ali, A. M., Correa‐Baena, J., Turren‐Cruz, S., Tajabadi, F., Tress, W., Taghavinia, N., Grätzel, M., Abate, A., Angelis, F. D., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702005 · Cited by 100
Bu, T., Li, J., Lin, Q., McMeekin, D. P., Sun, J., Wang, M., Chen, W., Wen, X., Mao, W., McNeill, C. R., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104917 · Cited by 86
Electronic structures and elastic properties of a family of metal-free perovskites
Li, K., Dong, L., Xu, H., Qin, Y. F., Li, Z.-G., Azeem, M., Li, W., & Bu, X. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00133f · Cited by 61
Perovskite‐based Tandem Solar Cells
Li, Y., Peng, Y., Hou, F., et al. (2022) · doi:10.1002/9783527832552.ch10 · Cited by 2
Cited by
Homogenized chlorine distribution for >27% power conversion efficiency in perovskite solar cells
Xiong, Z., Zhang, Q., Cai, K., Zhou, H., Song, Q., Han, Z., Kang, S., Li, Y., Jiang, Q., Zhang, X., et al. (2025) · Science · doi:10.1126/science.adw8780 · Cited by 461
Self-citationRapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
Self-citationHomogeneous crystallization and buried interface passivation for perovskite tandem solar modules
Gao, H., Xiao, K., Lin, R., Zhao, S., Wang, W., Dayneko, S., Duan, C., Ji, C., Sun, H., Bui, A. D., et al. (2024) · Science · doi:10.1126/science.adj6088 · Cited by 332
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Towards linking lab and field lifetimes of perovskite solar cells
Jiang, Q., Tirawat, R., Kerner, R. A., Gaulding, E. A., Xian, Y., Wang, X., Newkirk, J. M., Yan, Y., Berry, J. J., & Zhu, K. (2023) · Nature · doi:10.1038/s41586-023-06610-7 · Cited by 282
Self-citation
Metadata
- Authors
- Jiang, Q., Tong, J., Scheidt, R. A., Wang, X., Louks, A. E., Xian, Y., Tirawat, R., Palmstrom, A. F., Hautzinger, M. P., Harvey, S. P., Johnston, S., Schelhas, L. T., Larson, B. W., Warren, E. L., Beard, M. C., Berry, J. J., Yan, Y., & Zhu, K.
- Venue
- Science
- Published
- 2022-12-23
- Volume
- 378
- Issue
- 6626
- Pages
- 1295-1300
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4312090043
- Cited by
- 425
- References
- 57
- FWCI
- 21.88
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.