The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Aqueous synthesis of perovskite precursors for highly efficient perovskite solar cells
Abstract
High-purity precursor materials are vital for high-efficiency perovskite solar cells (PSCs) to reduce defect density caused by impurities in perovskite. In this study, we present aqueous synthesized perovskite microcrystals as precursor materials for PSCs. Our approach enables kilogram-scale mass production and synthesizes formamidinium lead iodide (FAPbI 3 ) microcrystals with up to 99.996% purity, with an average value of 99.994 ± 0.0015%, from inexpensive, low-purity raw materials. The reduction in calcium ions, which made up the largest impurity in the aqueous solution, led to the greatest reduction in carrier trap states, and its deliberate introduction was shown to decrease device performance. With these purified precursors, we achieved a power conversion efficiency (PCE) of 25.6% (25.3% certified) in inverted PSCs and retained 94% of the initial PCE after 1000 hours of continuous simulated solar illumination at 50°C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Controlled growth of perovskite layers with volatile alkylammonium chlorides
Park, J., Kim, J., Yun, H.-S., Paik, M. J., Noh, E., Mun, H. J., Kim, M. G., Shin, T. J., & Seok, S. I. (2023) · Nature · doi:10.1038/s41586-023-05825-y · Cited by 1,990
Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells
Ni, Z., Bao, C., Liu, Y., Jiang, Q., Wu, W.-Q., Chen, S., Dai, X., Chen, B., Hartweg, B., Yu, Z., et al. (2020) · Science · doi:10.1126/science.aba0893 · Cited by 1,302
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Self-citationZhumekenov, A. A., Saidaminov, M. I., Haque, M. A., Alarousu, E., Sarmah, S. P., Murali, B., Dursun, I., Miao, X.-H., Abdelhady, A. L., Wu, T., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00002 · Cited by 952
Saidaminov, M. I., Kim, J., Jain, A., Quintero-Bermudez, R., Tan, H., Long, G., Tan, F., Johnston, A., Zhao, Y., Voznyy, O., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0192-2 · Cited by 751
Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact
Peng, W., Mao, K., Cai, F., Meng, H., Zhu, Z., Li, T., Yuan, S., Xu, Z., Feng, X., Xu, J., et al. (2023) · Science · doi:10.1126/science.ade3126 · Cited by 666
Dual nature of the excited state in organic–inorganic lead halide perovskites
Stamplecoskie, K. G., Manser, J. S., & Kamat, P. V. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02988g · Cited by 432
Chen, W., Zhu, Y., Xiu, J., Chen, G., Liang, H., Liu, S., Xue, H., Birgersson, E., Ho, J. W., Qin, X., et al. (2022) · Nature Energy · doi:10.1038/s41560-021-00966-8 · Cited by 327
Wakamiya, A., Endo, M., Sasamori, T., Tokitoh, N., Ogomi, Y., Hayase, S., & Murata, Y. (2014) · Chemistry Letters · doi:10.1246/cl.140074 · Cited by 293
Mondal, N., & Samanta, A. (2017) · Nanoscale · doi:10.1039/c6nr09422h · Cited by 289
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Radical polymeric p-doping and grain modulation for stable, efficient perovskite solar modules
You, S., Zeng, H., Liu, Y., Han, B., Li, M., Li, L., Zheng, X., Guo, R., Luo, L., Li, Z., et al. (2023) · Science · doi:10.1126/science.add8786 · Cited by 260
Manipulating the Mixed‐Perovskite Crystallization Pathway Unveiled by In Situ GIWAXS
Qin, M., Tse, K., Lau, T., Li, Y., Su, C., Yang, G., Chen, J., Zhu, J., Jeng, U., Li, G., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901284 · Cited by 221
Precise Control of Perovskite Crystallization Kinetics via Sequential A‐Site Doping
Qin, M., Xue, H., Zhang, H., Hu, H., Liu, K., Li, Y., Qin, Z., Ma, J., Zhu, H., Yan, K., et al. (2020) · Advanced Materials · doi:10.1002/adma.202004630 · Cited by 213
Superior Carrier Lifetimes Exceeding 6 µs in Polycrystalline Halide Perovskites
Yang, X., Fu, Y., Su, R., Zheng, Y., Zhang, Y., Yang, W., Yu, M., Chen, P., Wang, Y., Wu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202002585 · Cited by 207
Self-citationProchowicz, D., Franckevičius, M., Cieślak, A. M., Zakeeruddin, S. M., Grätzel, M., & Lewiński, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04904k · Cited by 200
Chang, J., Zhu, H., Li, B., Isikgor, F. H., Hao, Y., Xu, Q., & Ouyang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08398b · Cited by 154
Mechanochemistry Advances High‐Performance Perovskite Solar Cells
Zhang, Y., Wang, Y., Yang, X., Zhao, L., Su, R., Wu, J., Luo, D., Li, S., Chen, P., Yu, M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202107420 · Cited by 123
Self-citationWang, T., Li, Y., Cao, Q., Yang, J., Yang, B., Pu, X., Zhang, Y., Zhao, J., Zhang, Y., Chen, H., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee02227c · Cited by 122
Self-citationShin, G. S., Zhang, Y., & Park, N. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b23086 · Cited by 84
Self-citationFeng, W., Liao, J., Chang, X., Zhong, J., Yang, M., Tian, T., Tan, Y., Zhao, L., Zhang, C., Lei, B., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.05.020 · Cited by 74
Ozaki, M., Shimazaki, A., Jung, M., Nakaike, Y., Maruyama, N., Yakumaru, S., Rafieh, A. I., Sasamori, T., Tokitoh, N., Ekanayake, P., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902235 · Cited by 67
Xue, H., Brocks, G., & Tao, S. (2022) · Physical Review Materials · doi:10.1103/physrevmaterials.6.055402 · Cited by 66
Abdelsamie, M., Xu, J., Brüning, K., Tassone, C. J., Steinrück, H., & Toney, M. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001752 · Cited by 60
Брус, В. В., Kyaw, A. K. K., Maryanchuk, P. D., & Zhang, J. (2015) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2586 · Cited by 49
Self-citationWang, D., Chen, J., Zhu, P., Qiao, Y., Hu, H., Zeng, J., Zhang, J., Qu, G., Wang, Y., Wang, X., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202203649 · Cited by 49
Self-citationWang, L., Jia, C., Yu, Z., Liu, X., Kang, L., Cong, Y., Shan, Y., Zhao, Z., Ma, B., & Cong, Y. (2012) · PLoS ONE · doi:10.1371/journal.pone.0051536 · Cited by 12
Cited by
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Self-assembled bilayer for perovskite solar cells with improved tolerance against thermal stresses
Dong, B., Wei, M., Li, Y., Yang, Y., Ma, W., Zhang, Y., Ran, Y., Cui, M., Su, Z., Fan, Q., et al. (2025) · Nature Energy · doi:10.1038/s41560-024-01689-2 · Cited by 261
Self-citationMaterials and methods for cost-effective fabrication of perovskite photovoltaic devices
Zhang, C., & Park, N.-G. (2024) · Communications Materials · doi:10.1038/s43246-024-00636-8 · Cited by 72
Self-citation
Metadata
- Authors
- Zhu, P., Wang, D., Zhang, Y., Liang, Z., Li, J., Zeng, J., Zhang, J., Xu, Y., Wu, S., Liu, Z., Zhou, X., Hu, B., He, F., Zhang, L., Pan, X., Wang, X., Park, N.-G., & Xu, B.
- Venue
- Science
- Published
- 2024-02-02
- Volume
- 383
- Issue
- 6682
- Pages
- 524-531
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4391428471
- Cited by
- 306
- References
- 32
- FWCI
- 31.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.