The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells
Abstract
Printable mesoscopic perovskite solar cells (p-MPSCs) do not require the added hole-transport layer needed in traditional p-n junctions but have also exhibited lower power conversion efficiencies of about 19%. We performed device simulation and carrier dynamics analysis to design a p-MPSC with mesoporous layers of semiconducting titanium dioxide, insulating zirconium dioxide, and conducting carbon infiltrated with perovskite that enabled three-dimensional injection of photoexcited electrons into titanium dioxide for collection at a transparent conductor layer. Holes underwent long-distance diffusion toward the carbon back electrode, and this carrier separation reduced recombination at the back contact. Nonradiative recombination at the bulk titanium dioxide/perovskite interface was reduced by ammonium phosphate modification. The resulting p-MPSCs achieved a power conversion efficiency of 22.2% and maintained 97% of their initial efficiency after 750 hours of maximum power point tracking at 55 ± 5°C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationHigh-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Efficient evaluation of electrostatic potential with computerized optimized code
Zhang, J., & Lu, T. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp02805g · Cited by 2,635
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Self-citationOne-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Hard and soft acids and bases—The evolution of a chemical concept
Pearson, R. G. (1990) · Coordination Chemistry Reviews · doi:10.1016/0010-8545(90)85016-l · Cited by 886
Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Homogenized NiO x nanoparticles for improved hole transport in inverted perovskite solar cells
Yu, S., Xiong, Z., Zhou, H., Zhang, Q., Wang, Z., Ma, F., Qu, Z., Zhao, Y., Chu, X., Zhang, X., et al. (2023) · Science · doi:10.1126/science.adj8858 · Cited by 672
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Hybrid functional studies of the oxygen vacancy inTiO2
Janotti, A., Varley, J. B., Rinke, P., Umezawa, N., Kresse, G., & Van de Walle, C. G. (2010) · Physical Review B · doi:10.1103/physrevb.81.085212 · Cited by 624
Reaction of O 2 with Subsurface Oxygen Vacancies on TiO 2 Anatase (101)
Setvín, M., Aschauer, U., Scheiber, P., Li, Y.-F., Hou, W., Schmid, M., Selloni, A., & Diebold, U. (2013) · Science · doi:10.1126/science.1239879 · Cited by 565
The energy and elastic dipole tensor of defects in ionic crystals calculated by the supercell method
Leslie, M., & Gillan, N. J. (1985) · Journal of Physics C: Solid State Physics · doi:10.1088/0022-3719/18/5/005 · Cited by 552
Interface passivation for 31.25%-efficient perovskite/silicon tandem solar cells
Chin, X. Y., Turkay, D., Steele, J. A., Tabean, S., Eswara, S., Mensi, M., Fiala, P., Wolff, C. M., Paracchino, A., Artuk, K., et al. (2023) · Science · doi:10.1126/science.adg0091 · Cited by 526
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Oxygen-Mediated Diffusion of Oxygen Vacancies on the TiO 2 (110) Surface
Schaub, R., Wahlström, E., Rønnau, A., Lægsgaard, E., Stensgaard, I., & Besenbacher, F. (2003) · Science · doi:10.1126/science.1078962 · Cited by 466
Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Self-citationElectron-Induced Dissociation of CO2 on TiO2(110)
Lee, J., Sorescu, D. C., & Deng, X. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204077e · Cited by 370
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Guerrero, A., Bisquert, J., & Garcia-Belmonte, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00214 · Cited by 339
Oxygen Vacancy Origin of the Surface Band-Gap State of TiO2(110)
Yim, C. M., Pang, C. L., & Thornton, G. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.036806 · Cited by 293
An elementary derivation of the hard/soft-acid/base principle
Ayers, P. W. (2005) · The Journal of Chemical Physics · doi:10.1063/1.1897374 · Cited by 255
Singh, T., Öz, S., Sasinska, A., Frohnhoven, R., Mathur, S., & Miyasaka, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706287 · Cited by 248
Tian, W., Zhao, C., Leng, J., Cui, R., & Jin, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08045 · Cited by 236
Self-citationThe Importance of Bulk Ti3+Defects in the Oxygen Chemistry on Titania Surfaces
Lira, E., Wendt, S., Huo, P., Hansen, J. Ø., Streber, R., Porsgaard, S., Wei, Y., Bechstein, R., Lægsgaard, E., & Besenbacher, F. (2011) · Journal of the American Chemical Society · doi:10.1021/ja200884w · Cited by 227
Moisture-triggered fast crystallization enables efficient and stable perovskite solar cells
Liu, K., Luo, Y., Jin, Y., Liu, T., Liang, Y., Yang, L., Song, P., Liu, Z., Tian, C., Xie, L., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-32482-y · Cited by 219
Wang, B., Zhang, M., Cui, X., Wang, Z., Rager, M. S., Yang, Y., Zou, Z., Wang, Z. L., & Lin, Z. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910471 · Cited by 154
Hancock, R. D., & Martell, A. E. (1996) · Journal of Chemical Education · doi:10.1021/ed073p654 · Cited by 110
Bogachuk, D., Saddedine, K., Martineau, D., Narbey, S., Verma, A., Gebhardt, P., Herterich, J., Glissmann, N., Zouhair, S., Markert, J., et al. (2021) · Solar RRL · doi:10.1002/solr.202100527 · Cited by 96
Liu, S., Zhang, D., Sheng, Y., Zhang, W., Qin, Z., Qin, M., Li, S., Wang, Y., Gao, C., Wang, Q., et al. (2021) · Fundamental Research · doi:10.1016/j.fmre.2021.09.008 · Cited by 83
Self-citationWang, Y., Feng, M., Chen, H., Ren, M., Wang, H., Miao, Y., Chen, Y., & Zhao, Y. (2023) · Advanced Materials · doi:10.1002/adma.202305849 · Cited by 81
The Concept of Hard and Soft Acids and Bases as Applied to Multi‐Center Chemical Reactions
Saville, B. (1967) · Angewandte Chemie International Edition in English · doi:10.1002/anie.196709281 · Cited by 69
Bogachuk, D., Yang, B., Suo, J., Martineau, D., Verma, A., Narbey, S., Anaya, M., Frohna, K., Doherty, T. A. S., Müller, D. C., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103128 · Cited by 68
Xiang, J., Han, C., Qi, J., Cheng, Y., Chen, K., Ma, Y., Xie, J., Hu, Y., Mei, A., Zhou, Y., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300473 · Cited by 59
Self-citationWagner, L., Qiu, C., Unmüssig, M., Bogachuk, D., Mastroianni, S., Würfel, U., Hu, Y., Han, H., & Hinsch, A. (2020) · Solar RRL · doi:10.1002/solr.202000595 · Cited by 38
Self-citationStrategies towards Cost Reduction in the Manufacture of Printable Perovskite Solar Modules
Pourjafari, D., Meroni, S. M. P., Peralta-Domínguez, D., Escalante, R., Baker, J., Monroy, A. S., Walters, A. S., Watson, T., & Oskam, G. (2022) · Energies · doi:10.3390/en15020641 · Cited by 27
Kartikay, P., Paul, A., Yella, A., & Mallick, S. (2023) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2023.128181 · Cited by 4
Metadata
- Authors
- Liu, J., Chen, X., Chen, K., Tian, W., Sheng, Y., She, B., Jiang, Y., Zhang, D., Liu, Y., Qi, J., Chen, K., Ma, Y., Qiu, Z., Wang, C., Yin, Y., Zhao, S., Leng, J., Jin, S., Zhao, W., Qin, Y., Su, Y., Li, X., Li, X., Zhou, Y., Zhou, Y., Ling, F., Mei, A., & Han, H.
- Venue
- Science
- Published
- 2024-03-15
- Volume
- 383
- Issue
- 6688
- Pages
- 1198-1204
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4392818796
- Cited by
- 271
- References
- 42
- FWCI
- 27.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.