Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
The ever-increasing power conversion efficiency of perovskite solar cells has illuminated the future of the photovoltaic industry, but the development of commercial devices is hampered by their poor stability. In this study, we report a scalable stabilization method using vapor-phase fluoride treatment, which achieves 18.1%-efficient solar modules (228 square centimeters) with accelerated aging–projected T 80 lifetimes (time to 80% of efficiency remaining) of 43,000 ± 9000 hours under 1-sun illumination at 30°C. The high stability results from vapor-enabled homogeneous fluorine passivation over large-area perovskite surfaces, suppressing defect formation energy and ion diffusion. The extracted degradation activation energy of 0.61 electron volts for solar modules is comparable to that of most reported stable cells, which indicates that modules are not inherently less stable than cells and closes the cell-to-module stability gap.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“yet their operational instability remains a critical barrier to practical deployment”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [12]
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Cited by
Items 101–155 of 155
Tailored Method for Recycling Degraded Perovskite Powder
Ha, S. R., Jeong, G., Jang, E. P., Kim, K., Noh, J. H., Jang, I., Kim, G., Choi, H., & Ha, S. M. (2025) · Small · doi:10.1002/smll.202507568 · Cited by 3
Luo, L., Gu, J., Shen, Y., Li, S., Chen, S., Yang, Y., Li, B., Rong, Y., Li, X., & Ding, J. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116474 · Cited by 6
Self-citationFang, Z., Mu, X., Xiao, G., & Cao, J. (2024) · Angewandte Chemie · doi:10.1002/ange.202418834 · Cited by 2
Zhang, Q., Zhang, J., Yang, J., & Chen, Y. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c08172 · Cited by 2
Self-citationZhao, Q., Hou, X., Xie, W., Luo, L., Xu, S., Song, X., & Wei, Q. (2025) · New Journal of Chemistry · doi:10.1039/d5nj00849b · Cited by 2
Buried Interface Modification for High Performance and Stable Inverted Perovskite Solar Cells
Song, F., Yan, N., Cao, Y., Zhang, J., Qi, D., Shan, J., Liu, Y., Jiang, L., Li, T., Li, L., et al. (2025) · Angewandte Chemie · doi:10.1002/ange.202516012 · Cited by 2
Self-citationDuan, C., Xiao, K., Wang, Y., Liu, Y., Ahmed, Y., Pang, Z., Zhan, W., Sun, H., Gao, H., Luo, H., et al. (2026) · Science China Materials · doi:10.1007/s40843-025-3788-9 · Cited by 4
Machine learning-guided scalable manufacturing of high-efficiency perovskite solar modules
Bu, Y., Gu, J., Shen, Y., Li, B., Hu, C., Ding, J., & Luo, L. (2026) · Journal of Materials Chemistry A · doi:10.1039/d5ta10235a · Cited by 2
Self-citationBidirectional Chemo-Mechanical Interface Stabilization in Perovskite Solar Cells
Qian, C., Li, X., Hao, M., Wang, K., Tang, J., Guo, P., He, L., Yu, W., Yang, C., Chen, D., et al. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c06932 · Cited by 2
Huang, J., Fang, M., 蔡彭麟, Li, S., Liu, S., Tojiboyev, I., Wei, M., Zhu, J., & Li, Y. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78067 · Cited by 2
“The ammonium ions may electrostati-cally interact with the perovskite lattice, potentially suppressing the deprotonation of formamidinium cations and stabilizing them at the A-site [ 26 ].”
Huang, T., & Nan, G. (2025) · ChemPhysChem · doi:10.1002/cphc.202401059 · Cited by 1
Li, S., Xu, X., Wang, X., Huang, N., Fang, J., Lin, D., Shao, Y., Zhou, J. J., Kyaw, A. K. K., He, S., et al. (2025) · Angewandte Chemie · doi:10.1002/ange.202421174 · Cited by 1
Charge carrier dynamics controlling performance of lead-based halide perovskite solar cells
Maduwanthi, C., Liu, M., & Tachibana, Y. (2025) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/adcef3 · Cited by 1
Yu, S., Quan, J., Yuan, F., Bi, Z., & Wan, Y. (2025) · International Journal of Chemical Engineering · doi:10.1155/ijce/5546097 · Cited by 1
Surface defects of CsPbX3 (X = Cl, Br, I) films passivated by CsF prepared by thermal evaporation
Zhang, W., Wang, S., & Yi, L. (2025) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2025.114996 · Cited by 1
Self-citationWang, C., Li, L., Chu, W., Dong, Z., Zhu, Y., Zhao, X., Yin, L., Nie, R., & Guo, W. (2026) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2026.02.033 · Cited by 1
Self-citationAnion-competition regulation of PbI 2 frameworks for two-step fabricated perovskite solar cells
Yao, Q., Zhu, J., Chen, C., Yang, G., Su, Z., Niu, T., Pan, T., Xu, K., Xia, Y., Gao, X., et al. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta01467d · Cited by 1
An Inert Fluoride Interlayer Enabling Efficient and Stable Inverted Perovskite Solar Cells
Liu, H., Meng, H., Liu, Q., Wang, K., Peng, C., Sun, X., Li, S., Wang, X. J., Tian, Q., Wang, L., et al. (2026) · Small Methods · doi:10.1002/smtd.70670 · Cited by 1
“Inverted (p-i-n) perovskite solar cells (PSCs) have emerged as a promising next-generation photovoltaic technology, with certified power conversion efficiencies (PCEs) now exceeding 27% [ 1, 2 ], demonstrating significant potential for commercialization.”
Maulidan, I. F., Ahdaliza, A. Z., Ismail, N. I., Haniff, M. A. S. M., Ludin, N. A., Umar, M. I. A., Alimin, A., Oyama, M., & Umar, A. A. (2026) · Solar RRL · doi:10.1002/solr.70396 · Cited by 1
“Recent in situ spectroscopic and microscopy studies show that effective additives can raise the activation energy barrier for δ -phase formation, stabilize the perovskite lattice, and retard ion diffusion, culminating in enhanced operational stability over hundreds or thousands of hours [42].”
Bridging the scalability-stability gap in perovskite photovoltaics via solution-processed coating
Zhai, Z., Li, X., Chen, J., Ruan, B., Lai, J., Liu, Q., & Zhou, H. (2026) · Science China Materials · doi:10.1007/s40843-026-4091-4 · Cited by 1
“5c) [59].”
InfluentialQiu, L., Li, T., Tian, W., Liu, F., Ni, Z., Guo, Z. W., & Zhao, Y. (2026) · ChemSusChem · doi:10.1002/cssc.70859 · Cited by 1
Eliminating Buried Interface Voids for High‐Efficiency and Stable Perovskite Solar Cells
Xu, Y., Zhang, D. H., Sun, T., Ma, X., Yang, W., Huang, J., Yu, H., Wang, L., Hu, B., Shen, Y. F., et al. (2026) · Small · doi:10.1002/smll.74604 · Cited by 1
Saeed, A., Xu, X. X., Li, N., Sun, P., Xu, H., Hu, Q., Haider, Z., Miao, Q., Imran, T., Bai, Y., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.77378 · Cited by 1
“This has shifted research priorities from high efficiency to addressing challenges in large-scale production and long-term operational stability [4–6].”
Mikuciunaite, J., Ding, B., Yang, Y., Gao, X., Valipour, V., Ding, Y., Astani, N. A., Romano‐deGea, J., Frederiksen, L. E. K., Fadaei‐Tirani, F., et al. (2026) · Advanced Energy Materials · doi:10.1002/aenm.71396 · Cited by 1
Zhang, J., Zhou, R., Guo, M., Wu, M., Wang, N., Wang, X., Yuan, X., Li, S., Ren, Y., Song, Y., et al. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.4221605 · Cited by 1
Self-citationLi, L., Wang, T., Wen, X., Du, K., Zhou, C., Xu, Y., Dong, X. F., Wang, A., Yuan, N., & Ding, J. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202532038 · Cited by 1
Solid-solution-induced lattice hardening reinforces perovskite stiffness for stable solar cells
Liang, J., Li, H., Chen, T., Zhu, S., Wang, H., Wang, Z., Hu, Y., Chen, H., Huo, W., Fang, M., et al. (2026) · National Science Review · doi:10.1093/nsr/nwag484 · Cited by 1
Vapor-phase fluoride treatment: A stability breakthrough for perovskite solar modules
Tian, B., Zhang, P., Zhao, X., Zhang, Z., & Guo, W. (2024) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2024-1064
Self-citationRobust Fully Screen‐Printed Perovskite Solar Cells Based on Synergistic Ostwald Ripening
Chen, C., Guo, C., Yao, Q. R., Wang, J., Xu, Y., Wang, D., Huang, X. D., Ran, X., Xia, Y., Chao, L., et al. (2025) · Angewandte Chemie · doi:10.1002/ange.202425162
Stabilizing black-phase FAPbI3 films for effective photovoltaic devices
Zhang, Z., Wu, C., & Chu, L. (2025) · 中国科学通报:英文版 · doi:10.1016/j.scib.2025.04.003
Self-citationVapor-assisted surface reconstruction of perovskite solar modules
Duan, C., & Tan, H. (2025) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/csb-2025-5193
Jiang, J., & Xu, X. (2025) · Science China Materials · doi:10.1007/s40843-025-3554-7
Dong, L., Li, X., Zeng, S., Guo, H., Xia, W., Gao, D., Sun, Y., Wang, H., Li, W., Liu, D., et al. (2025) · Materials Today Energy · doi:10.1016/j.mtener.2025.102016
High-quality deep-blue CsPbBr 3 quantum rods toward stable white light-emitting diodes
Shen, W., Zhao, W., Yang, Z., Qiu, Y., Meng, N., Zhang, E., Lu, S., Zhi, T., Xia, P., & Chen, S. (2025) · Chemical Communications · doi:10.1039/d5cc06381g
Liu, M., Hu, S., Deng, X., Duan, C., Dou, Y., Zhang, T., Liu, M., Song, Y., Chen, Y., Chen, X., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c00384
Chu, W., Wang, C., Wei, Z., Li, L. S., Gao, J., Dai, Y., Zhao, L., Lyu, D., Tian, B., Qian, D., et al. (2026) · Small · doi:10.1002/smll.73436
Self-citationWide bandgap in window layers for efficient perovskite solar cells
Zhu, H., Ren, Z., Huang, T., Wang, Y., Li, J., He, S., Liu, K., Qiu, Y., Zhao, Q. Y., Yin, S., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177044
Ink Design for Printing Perovskite Solar Cells and Modules
Yang, Y., Liu, Z., Zhang, W., Wu, J., Zhang, K., Wang, Y., Meng, L., Yuan, M., Qiao, Y., & Song, Y. (2026) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00980
Self-citationFrom materials to devices: advances in vapor deposition technologies for perovskite solar cells
Luo, L., Zhu, Y. Z., Bu, Y., Li, J., Li, B., Lu, J., Li, X., Ding, J. J., & Rong, Y. (2026) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2026.114544
Self-citationZhang, J., Zhou, R., Guo, M., Wu, M., Wang, N., Wang, X., Yuan, X., Li, S., Ren, Y., Song, Y., et al. (2026) · Angewandte Chemie · doi:10.1002/ange.4221605
Self-citationComparative analysis of voltage losses in perovskite and GaAs solar cells at low temperatures
Yuce-Cakir, H., Ogunniranye, I. B., Stevens, M. A., Lumb, M. P., Schmieder, K. J., Thon, S. M., Song, Z., & Hamadani, B. H. (2026) · Applied Physics Letters · doi:10.1063/5.0343201
Chu, Z., Li, J., Gao, J., Li, S., Fan, B., Gu, Z., Xie, Y., Luo, Y., Xing, Z., Meng, X., et al. (2026) · Nature Synthesis · doi:10.1038/s44160-026-01142-0
Wu, J., Yao, F., Wang, D., Yin, J., Liu, Z., Tang, J., Liu, S., Peng, Z., Li, S., Gao, T., et al. (2026) · Environmental Research · doi:10.1016/j.envres.2026.125613
Ligand‐Optimized Inorganic Passivation with Alkylammonium Sulfates for Perovskite Photovoltaic
Shen, J., Zhao, K., Jin, D., Zhou, J., Wang, X., Xue, H., & Wang, R. (2026) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70778
Jiang, Z., Sun, J., Zhang, Z., Zhu, P., Liu, W., Zhou, B., Zhang, H., Xu, B., & Choy, W. C. H. (2026) · Advanced Energy Materials · doi:10.1002/aenm.71552
Self-citationSubmerged solar harvesting with wide-band-gap perovskites for autonomous underwater energy systems
Ma, S., Cai, B., Wang, R., Chen, J., Liu, R., Xu, L., Ren, X., Gao, P., Grätzel, M., & Zhang, W. (2026) · Joule · doi:10.1016/j.joule.2026.102672
Self-citationFeng, W., Yang, G., Zhang, Y., Fang, Y., Lin, S.-T., Zhou, Z.-K., Chen, H., Song, Z., Duan, Q., Kuang, D., et al. (2026) · Angewandte Chemie · doi:10.1002/ange.3844270
Feng, W., Yang, G., Zhang, Y., Fang, Y., Lin, S.-T., Zhou, Z.-K., Chen, H., Song, Z., Duan, Q., Kuang, D., et al. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.3844270
Self‐Passivated Metal Oxides Composite Buffer Stabilizing Efficient Perovskite Solar Modules
Chen, S., Li, J., Xiang, W., Zhang, Z., Yang, Y., Dong, Q., Han, L., & Wang, Y. (2026) · Advanced Materials · doi:10.1002/adma.75068
Self-citationPrussian blue regulates ion dynamics in perovskite solar cells
Cao, F., Ma, M., Zhou, J., Cheng, F., Dai, Z., Chen, L., Hong, Y.-H., Tian, D., Zhan, S., Chen, Y., et al. (2026) · Science · doi:10.1126/science.aef5487
Redefining Sustainability Pathways for Metal Halide Perovskite Optoelectronics
Choi, S., Cho, J., & Kim, J. (2026) · Advanced Optical Materials · doi:10.1002/adom.71843
Trans-interface engineering for reliable perovskite solar cells with reproducible stability
Guo, P., Yu, W., Hao, M., Wang, K., Duan, T., Li, S., & Zhou, Y. (2026) · Nature Photonics · doi:10.1038/s41566-026-02007-w
Zhang, L., Jiang, X., Yan, Y., Fu, M., Zhang, Z., Zhang, J., Wang, C., Su, Z., He, B., Sun, Q., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78854
Self-citationCost-driven strategies towards industrially manufacturable perovskite photovoltaics
Zhang, Z., Liu, Y., Qin, Z., Chen, M., Wang, Y., & Han, L. (2026) · Nature Reviews Materials · doi:10.1038/s41578-026-00973-9
Self-citationYan, B., Gong, R., Huang, Y., Gu, N., Li, R., Liu, D., 严康荣, Xu, X., Yang, Y., Yao, J., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-78867-1
Metadata
- Authors
- Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., Zhang, Z., & Guo, W.
- Affiliations
- Nanjing University of Aeronautics and Astronautics (CN)
- University of Cambridge (GB)
- Corresponding author
- Zhao, Xiaoming
- Zhang, Peikun
- Liu, Tianjun
- Zhang, Zhuhua
- Guo, Wanlin
- ORCID
- Venue
- Science
- Published
- 2024-07-26
- Volume
- 385
- Issue
- 6707
- Pages
- 433-438
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4400974284
- Semantic Scholar
- e8325b34a27421fa0c4b8d236ca81167896a31ff
- Cited by
- 152
- References
- 70
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 13
- FWCI
- 15.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar modules, device stability, activation energy of degradation, defect formation energy, accelerated aging, power conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.