Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
The ever-increasing power conversion efficiency of perovskite solar cells has illuminated the future of the photovoltaic industry, but the development of commercial devices is hampered by their poor stability. In this study, we report a scalable stabilization method using vapor-phase fluoride treatment, which achieves 18.1%-efficient solar modules (228 square centimeters) with accelerated aging–projected T 80 lifetimes (time to 80% of efficiency remaining) of 43,000 ± 9000 hours under 1-sun illumination at 30°C. The high stability results from vapor-enabled homogeneous fluorine passivation over large-area perovskite surfaces, suppressing defect formation energy and ion diffusion. The extracted degradation activation energy of 0.61 electron volts for solar modules is comparable to that of most reported stable cells, which indicates that modules are not inherently less stable than cells and closes the cell-to-module stability gap.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“yet their operational instability remains a critical barrier to practical deployment”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [12]
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Cited by
Graphene-polymer reinforcement of perovskite lattices for durable solar cells
Li, Q., Zheng, Y., Wang, H., Liu, X., Lin, M., Sui, X., Leng, X., Liu, D., Wei, Z., Song, M., et al. (2025) · Science · doi:10.1126/science.adu5563 · Cited by 216
Vapor-assisted surface reconstruction enables outdoor-stable perovskite solar modules
Sun, X., Shi, W., Liu, T., Cheng, J., Wang, X., Xu, P., Zhang, W., Zhao, X., & Guo, W. (2025) · Science · doi:10.1126/science.adv4280 · Cited by 109
Self-citationDiverse Perovskite Solar Cells: Progress, Challenges, and Perspectives
Zhang, L., Zhang, M., Wang, H., Li, Z., Zhang, Z., Song, Y., Song, X. L., Wang, S., Chen, J., Li, W., et al. (2025) · Advanced Materials · doi:10.1002/adma.202512221 · Cited by 92
Self-citationYuan, L., Xue, Q., Wang, F., Li, N., Waterhouse, G. I. N., Brabec, C. J., Gao, F., & Yan, K. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00663 · Cited by 88
Suo, J., Pettersson, H., & Yang, B. (2025) · EcoMat · doi:10.1002/eom2.12511 · Cited by 71
“Moreover, the stability of PSCs has also been significantly enhanced [2–6], meeting various industry-standard tests, including long-term maximum power point tracking under continuous one-sun illumination, damp heat (85% humidity, 85°C), and temperature cycling tests ( − 40°C to 85°C).”
Mutual stabilization of hybrid and inorganic perovskites for photovoltaics
Li, Y., Zheng, Z., Zheng, X., Liu, X., Yang, Y., Zhu, Y., Wang, Z., Ren, X., Fu, M., Guo, R., et al. (2025) · eScience · doi:10.1016/j.esci.2025.100449 · Cited by 68
Li, Y., Xie, Z., Duan, Y., Li, Y., Sun, Y., Su, C., Li, H., Sun, R., Cheng, M., Wang, H., et al. (2024) · Advanced Materials · doi:10.1002/adma.202414354 · Cited by 64
Fabricating Perovskite Films for Solar Modules from Small to Large Scale
Yin, R., Wu, Y., Huang, Z., Vasenko, A. S., Xu, S., & Zhou, H. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202419184 · Cited by 64
Temperature-controlled vacuum quenching for perovskite solar modules towards scalable production
Bi, L., Wang, J., Zeng, Z., Ji, X., Huang, X., Lin, F. R., Tsang, S., Fu, Q., & Jen, A. K. ‐. (2025) · Nature Photonics · doi:10.1038/s41566-025-01703-3 · Cited by 75
Self-Assembled Monolayers for Perovskite Solar Cells: Molecular Design and Chemical Synthesis
Wu, T., Zhang, M., Gao, X., Shen, H., Liu, X., Li, Z., Xu, J., & Hao, X. (2025) · ACS Nano · doi:10.1021/acsnano.5c05601 · Cited by 56
Mao, P., Bi, W., Lv, J., Zhang, Z., Wang, B., & Zhong, Y. (2025) · Advanced Science · doi:10.1002/advs.202512523 · Cited by 54
Self-citationXiang, J., Han, C., Cheng, Y., Gao, Q., Hu, W., Yang, Z., Mei, A., Zhou, Y., & Han, H. (2025) · Advanced Materials · doi:10.1002/adma.202415405 · Cited by 52
Key Advancements and Emerging Trends of Perovskite Solar Cells in 2024–2025
Shen, X., Lin, X., Su, H., Zhang, Z., Wu, T., Zhang, J., Peng, Y., Zhang, Y., Zhang, S., Zhou, Z., et al. (2026) · Nano-Micro Letters · doi:10.1007/s40820-025-02022-6 · Cited by 57
“Guo et al. performed fluorine passivation on the perovskite active layer through vapor deposition [48].”
Self-citationLaser annealing enables rapid, degradation-free ambient processing of perovskite solar modules
Chu, Z., Fan, B., Zhao, Y., Xie, Y., Luo, Y., Li, J., Gong, C., Zhang, Y., Meng, X., Chen, Y., et al. (2025) · Science · doi:10.1126/science.adx9650 · Cited by 47
Cui, H., Chen, W., Yang, X., Zhou, S., Wang, C., Chen, G., Du, S., Dong, K., Wang, S., Fu, H., et al. (2025) · Advanced Materials · doi:10.1002/adma.202502770 · Cited by 48
Stability and reliability of perovskite photovoltaics: Are we there yet?
Tanko, K. T., Tian, Z., Raga, S. R., Xie, H., Katz, E. A., & Lira‐Cantú, M. (2025) · MRS Bulletin · doi:10.1557/s43577-025-00863-5 · Cited by 50
Zhang, Z., Zhu, R., Li, G., Tang, Y., Wu, H., Zhao, J., Wu, J., Gries, T., Musiienko, A., Zuo, S., et al. (2026) · Nature Energy · doi:10.1038/s41560-026-01993-z · Cited by 63
“Although recent advancements have improved PSCs against light 2,3 , heat 4,5 , bias 6,7 and humidity 8,9 , their reliability in outdoor environments remains underdeveloped, where daily and seasonal weather conditions are highly variable.”
Self-citationStress Relaxation for Lead Iodide Nucleation in Efficient Perovskite Solar Cells
Zheng, Z., Ge, Y., Yang, X., Shao, W., Wang, H., Yu, Z., Tao, C., Fu, H., Ke, W., & Fang, G. (2025) · Advanced Materials · doi:10.1002/adma.202412304 · Cited by 41
Intermediate phase evolution for stable and oriented evaporated wide-bandgap perovskite solar cells
Dong, Z. L., Hu, J., Guo, X., Shi, Z., Chen, H., Wang, Y., Luo, R., Steele, J. A., Degnan, Z., Solano, E., et al. (2025) · Nature Materials · doi:10.1038/s41563-025-02375-8 · Cited by 53
Shen, P., Zhang, X., Xu, H., & Pan, B. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.4c11768 · Cited by 33
Reliable perovskite indoor photovoltaics for self-powered devices
Chen, C., He, X., Qin, R., Wang, K., Huang, L., Jin, R., Chen, X., Bian, Z.-K., Yang, Y., Jin, K., et al. (2025) · National Science Review · doi:10.1093/nsr/nwaf242 · Cited by 32
“This study focuses on the stability of PIPVs, conducting a series of accelerated aging tests to assess whether their operational lifespans meet market requirements [26 –28 ].”
Strain relaxation in halide perovskites via 2D/3D perovskite heterojunction formation
Liu, D., Bi, J., Xu, W., Orr, K. W. P., Wang, F., Liu, X., Ren, A., Zhang, J., Hinder, S. J., Li, B., et al. (2025) · Science Advances · doi:10.1126/sciadv.adu3459 · Cited by 40
“Compared to their GaAs and silicon-based equivalents ( 3 , 4 ), perovskite semiconductors still face pressing challenges, including poor black-phase stability ( 5 – 7 ), and presence of nonradiative recombination ( 8 , 9 ), which hampers its realistic deployment in opto-electronic applications.”
Self-citationAI-guided design of efficient perovskite solar cells operationally stable at 100°C
Guo, J., Li, B. R., Zhang, Z. Y., Liu, F., Li, C., Wang, Y., Wang, S., Chang, G., Fan, J., Zhang, T., et al. (2026) · Science · doi:10.1126/science.aef1620 · Cited by 32
Self-citationExploring the Potential and Hurdles of Perovskite Solar Cells with p-i-n Structure
Zhang, C., Yu, Z., Li, B., Li, X., Gao, D., Wu, X., & Zhu, Z. (2024) · ACS Nano · doi:10.1021/acsnano.4c11866 · Cited by 31
Self-citationIonic liquids improve the long-term stability of perovskite solar cells
Xu, W., Shao, W., Tang, Y., Lin, C., Yang, H., Yang, Y.-T., Kim, J. H., Lee, G. Y., Kumar, P., Pedersen, K. R., et al. (2025) · Nature Energy · doi:10.1038/s41560-025-01906-6 · Cited by 31
“1–5).”
Self-citationLiu, Q., Ding, L., Fu, J., Zheng, B., Yu, D., Bai, H., Tian, Q., Fan, B., Liu, Y., Pang, S., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202416390 · Cited by 29
Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells
Jiang, Y., Sun, X., Liu, T., Zhang, W., Xu, P., Li, B., Zhao, X., & Guo, W. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202410721 · Cited by 27
Self-citationGuo, Y., Yao, F., Zhang, Y., Chen, G., Du, S., Yu, Z., Zhou, H., Ke, W., Li, C., & Fang, G. (2025) · Energy & Environmental Science · doi:10.1039/d4ee05855k · Cited by 27
Li, M., Xie, Y., Luo, L. J., Zheng, Z., Guo, J., He, L., Zheng, X., Liu, R., Rong, Y., Guo, R., et al. (2025) · Advanced Materials · doi:10.1002/adma.202501057 · Cited by 26
Buried Interface Modification for High Performance and Stable Inverted Perovskite Solar Cells
Song, F., Yan, N., Cao, Y., Zhang, J., Qi, D., Shan, J., Liu, Y., Jiang, L., Li, T., Li, L., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202516012 · Cited by 29
Self-citationOrganic Molecule Vapor‐Assisted Passivation for Efficient and Stable Perovskite Solar Cells
Ji, H., Zhang, B., Zhao, Q., Gao, K., Zhang, X., Yang, C., Tang, J., Sui, M., & Pang, S. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202405441 · Cited by 25
Li, S., Xu, X., Wang, X., Huang, N., Fang, J., Lin, D., Shao, Y., Zhou, J. J., Kyaw, A. K. K., He, S., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202421174 · Cited by 24
Improved damp heat and thermal cycling stability of organic solar cells
Qin, J. P., Xi, Q., Wu, N., Liu, B., Yue, C., Fang, J., Wang, Z., Du, Y., Zhang, Q., Wang, Z., et al. (2025) · Nature Energy · doi:10.1038/s41560-025-01885-8 · Cited by 24
Robust Fully Screen‐Printed Perovskite Solar Cells Based on Synergistic Ostwald Ripening
Chen, C., Guo, C., Yao, Q., Wang, J., Xu, Y., Wang, D., Huang, X. D., Ran, X., Xia, Y., Chao, L., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202425162 · Cited by 22
Buried Interface Modification for Efficient FAPbI3 Perovskite Modules by Full Blade‐Coating Process
Huang, C., Liu, Z., Jiang, S., Du, X., Tan, C., Qin, X., Cui, Y., Zhang, R., Li, Y., Tian, F., et al. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202501227 · Cited by 21
Sun, M., Jiao, Z., Wang, P., Li, X., & Yuan, G. (2025) · Molecules · doi:10.3390/molecules30102221 · Cited by 18
“In addition, Zhao, X., et al. [66] developed a scalable vapor-phase fluoride treatment to facilitate a uniform and stable perovskite surface, resulting in the suppression of defect formation.”
Challenges and perspectives for the perovskite module research
Li, R., Yao, L., Sun, J., Sun, Z., Zhang, K., Xue, J., & Wang, R. (2025) · Chem · doi:10.1016/j.chempr.2025.102542 · Cited by 19
Khamgaonkar, S. S., & Maheshwari, V. (2025) · Energy & Environmental Science · doi:10.1039/d5ee02619a · Cited by 17
Chen, C., Lu, C., Suo, Z., Mu, X., Yang, Y., & Cao, J. (2026) · Advanced Materials · doi:10.1002/adma.202521697 · Cited by 17
Photostability of Perovskite Solar Cells: Challenges and Strategies
Liu, R., Yu, R., & Tan, Z. (2025) · Nanomaterials · doi:10.3390/nano15110786 · Cited by 16
“…perovskite layer can act as seeds for the uneven crystallization and growth of the film, reducing both buried-interfacial and bulk defects, increasing ion migration activation energy, and minimizing ion migration [82], thereby enhancing the stability and efficiency of perovskite devices [83–85].”
Yang, H., Lu, Z., Hou, T., Qian, T., Li, J., Li, R., Cheng, W., Li, J. H., Wang, S., Yang, Y., et al. (2025) · Advanced Materials · doi:10.1002/adma.202511855 · Cited by 16
Castriotta, L. A., Wang, M., Shi, X., Dou, B., Schelhas, L. T., & Huang, J. (2026) · Nature Energy · doi:10.1038/s41560-026-01969-z · Cited by 26
Fang, Z., Mu, X., Xiao, G., & Cao, J. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202418834 · Cited by 18
Wei, X., Zhang, K., Chen, H., Zhong, W., Lin, Q., Huang, X., Lv, C., Du, Y., Liu, H., Hai, G., et al. (2025) · Nature Photonics · doi:10.1038/s41566-025-01790-2 · Cited by 15
“Vapour post-treatment is inherently scalable and can avoid solvent-induced degradation 18,19 .”
Vacuum preparation of charge transport layers for perovskite solar cells and modules
Luo, T., Liu, L., Du, M., Wang, K., & Liu, S. F. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta06502f · Cited by 16
Methylammonium-Free Perovskite Photovoltaic Modules
Chu, L., Cao, J., & Wu, C. (2025) · ACS Nano · doi:10.1021/acsnano.4c18089 · Cited by 15
Gas-medium annealing for perovskite solar cells with state-of-the-art energy loss
Chen, M., Qin, Z., Zhang, Z., Wang, Y., & Han, L. (2025) · Energy & Environmental Science · doi:10.1039/d5ee00851d · Cited by 15
Self-citationMultimodal electron microscopy of halide perovskite interfacial dynamics
Li, X., Gu, Q., Huang, W., Fairclough, S. M., Friend, R. H., Stranks, S. D., Liu, T., & Ducati, C. (2026) · Nature · doi:10.1038/s41586-026-10238-8 · Cited by 14
“12–15), highlighting chloride migration and electrode corrosion as key failure mechanisms and underscoring the need for robust interfacial stabilization strategies.”
Self-citationDou, Y., Geng, C., Duan, C., Hu, S., Deng, X., Chen, Y., Kong, A., Peng, Y., Qiang, Z., & Ku, Z. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110914 · Cited by 14
Challenges and opportunities in high efficiency scalable and stable perovskite solar cells
Hossain, K., Nayak, S., & Kabra, D. (2024) · Applied Physics Letters · doi:10.1063/5.0232621 · Cited by 13
Commercialization of perovskite photovoltaics: Recent progress and perspectives
Dou, B., Sidhik, S., Möbus, J., & Lorenz, A. (2024) · MRS Bulletin · doi:10.1557/s43577-024-00815-5 · Cited by 13
Ferrocene-driven revolution in perovskite photovoltaics
Lu, M., Sun, X., & Chen, C. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.110720 · Cited by 13
Lü, X., Zhou, S., Sun, K., Meng, Y., Yang, M., Zhang, J., Tian, R., Wang, J., Pan, H., Bai, Y., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c03542 · Cited by 13
Self-citationRecent advancements in wearable self-healing polysiloxane materials and wearable sensors
Liu, T., Wang, T., Zhang, S., & Jiang, B. (2025) · Wearable electronics. · doi:10.1016/j.wees.2024.12.002 · Cited by 12
Self-citationZhou, Y., Wang, L.-X., Hui, S.-C., Song, L. Y., Ran, C., Wu, Z., & Huang, W. (2025) · ACS Nano · doi:10.1021/acsnano.5c00458 · Cited by 14
Molecular‐Perspective Insights into Top Interface Passivation in Inverted Perovskite Solar Cells
Xing, J., Liu, C., Cao, Q., Xie, F., Zeng, X., Zhang, X., & Liu, H. (2025) · Small · doi:10.1002/smll.202506495 · Cited by 12
Dry‐Processed Perovskite Photovoltaics: Materials, Fabrication Techniques, and Devices
Huang, L., Chen, Z., Wang, K., & Wang, Z. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202503501 · Cited by 12
Xie, Y., Fan, B., Li, H., Gong, C., Chu, Z., Zhang, S., Zhang, Y., Hu, X., & Chen, Y. (2026) · Nature Communications · doi:10.1038/s41467-026-69685-6 · Cited by 12
“These defects, such as halide vacancies 11,17,18 , excess lead iodide (PbI 2 ) 19,20 , surface and interfacial voids 14,21 – 23 , signi fi cantly compromise the performance of PSCs.”
Zhang, M., Li, J., Mao, W., Zhang, W., & Chu, L. (2026) · Journal of Materials Chemistry A · doi:10.1039/d5ta10312f · Cited by 13
Self-citationGeng, T., Ding, J., Zhang, Z., Li, M., Chen, H., Pauporté, T., Wan, R., Chen, J., & Chen, C. (2025) · Moore and More · doi:10.1007/s44275-025-00026-3 · Cited by 11
Self-citationCai, W., Wang, J., Zhu, X., Jiao, B., Yang, L. Y., Li, J., He, S., Xu, R., Sun, Y., Tang, H., et al. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202505869 · Cited by 10
Zhao, R., Du, Y., Wu, N., Li, X., Yuan, W., Ge, S., Xu, Z., Shen, X., Ma, S., Wang, R., et al. (2025) · Science China Materials · doi:10.1007/s40843-025-3643-8 · Cited by 10
“High-performance inverted PSCs require precise control over the grain boundaries (GBs) and the interface properties between the perovskite light-absorber and charge transport layers, especially for the buried interface [8–11].”
Self-citationFang, Y., Sun, J., Tan, Y., Yang, G. W., Chen, H., Gu, M., Feng, Y., Yang, M., Liu, H., Fang, J., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-69264-9 · Cited by 10
“9 and 10, Fig.”
Peng, L., Mao, Y., Yin, Y., Chen, Y., Zhang, T., Jin, S., & Zhang, J. (2026) · Nano-Micro Letters · doi:10.1007/s40820-026-02134-7 · Cited by 10
Self-citationRecent advances in tin perovskites and their applications
Yang, F., Tong, Y., Wang, K., Chen, Y., Kang, Z., & Wang, H. (2025) · Advanced Photonics · doi:10.1117/1.ap.7.3.034003 · Cited by 9
Heteroaryl derivatives for hole-transport layers improve thermal stability of perovskite solar cells
Kanda, H., Mondal, S., Eguchi, N., Nishimura, N., Hinuma, Y., Yamamoto, K., Yumoto, M., Tashiro, K., Takada, H., Narazaki, A., et al. (2026) · Nature Communications · doi:10.1038/s41467-025-68236-9 · Cited by 9
Zhang, W., Xu, P., Wang, J., Tian, B., Zhang, J., Wang, C., Sun, X., Liu, T., Wang, X., Nie, R., et al. (2025) · Small · doi:10.1002/smll.202411413 · Cited by 9
Self-citationLi, Y., Huang, C., Qin, X., Du, X., Jiang, S., Tan, C., Liu, Z., Cui, Y., Zhang, R., Wei, H., et al. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta01221j · Cited by 8
Fluid Chemistry of Metal Halide Perovskites
Chen, C., Yao, Q., Wang, J., Ran, C., Chao, L., Xia, Y., & Chen, Y. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202503593 · Cited by 8
Hypophosphorous Acid Additive Engineering for Efficient Cu2AgBiI6 Solar Cells
Zhang, Q., Tao, L., Ma, S., Xu, J., Xu, J., Su, J., Kang, J., Yin, H., & Chen, S. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202504863 · Cited by 8
Balakirev, D. O., Blagodarnaia, E. D., Ilicheva, E. A., Sukhorukova, P. K., Zolotov, M. V., Saratovsky, N. S., Trainov, K. P., Belyy, A. Y., Chuyko, I. A., Peregudova, S. M., et al. (2025) · Synthetic Metals · doi:10.1016/j.synthmet.2025.117908 · Cited by 7
Control of Facet Preference and Stability with Halogen Passivation of CsPbBr 3 Perovskite
Cui, X., Yan, H., Chen, H., Liu, X., & Cai, Y. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c10877 · Cited by 8
Zhao, T., Zhang, Y., Qu, J., Gao, B., Sun, L., Wang, X., & Chen, G. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202421104 · Cited by 7
Protocols for degradation assessment and stability enhancement in perovskite solar cells
Yang, S. J., Song, S. W., Park, C., Choi, J. H., Lee, E., & Kim, M. (2025) · Chemical Communications · doi:10.1039/d5cc01404b · Cited by 6
Wu, M., Xu, T., Li, N., Wang, Z., Wang, B., Gong, J., Liu, S. F., & Xiang, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202516786 · Cited by 6
Chen, H., Li, G., Liu, R., Zhu, C., Song, J. C., Song, J., Li, Z., & Yan, W. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.167534 · Cited by 6
Sun, X., Xu, P., Li, X., Zhao, X., Zhang, W., Wang, X., Zhang, Z., Shi, W., Guo, W., & Zhao, X. (2025) · Advanced Energy Materials · doi:10.1002/aenm.202504572 · Cited by 6
Self-citationWang, X., Luo, R., Li, N., Li, J. B., Wang, T., Steele, J. A., Solano, E., Zhu, Z., Yin, X., Chen, J. P., et al. (2026) · Nature Energy · doi:10.1038/s41560-026-02014-9 · Cited by 6
“6).”
Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells
Jiang, Y., Sun, X., Liu, T., Zhang, W., Xu, P., Li, B., Zhao, X., & Guo, W. (2024) · Angewandte Chemie · doi:10.1002/ange.202410721 · Cited by 6
Self-citationHan, Y., Feng, X., Wei, Y., Han, L., Zhang, B., Meng, Q., Lu, B., Cui, C., Wei, H., Li, Y., et al. (2025) · ACS Materials Letters · doi:10.1021/acsmaterialslett.5c00115 · Cited by 6
Su, S., Chen, Z., Hao, L., Xu, X., Ahn, T. K., & Yang, Y. X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202426078 · Cited by 6
Wang, H., Liang, Y., Zheng, L., Cai, B., Chen, C., Cheng, M., & Li, L. (2026) · ACS Energy Letters · doi:10.1021/acsenergylett.5c03328 · Cited by 5
Su, L., Chen, Y., Yi, N., Qiu, X., Sheng, T., Li, S. S., Chen, S., Wang, B., Gan, F., Wu, Y., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c00054 · Cited by 5
Liu, Q., Ding, L., Fu, J., Zheng, B., Yu, D., Bai, H., Tian, Q., Fan, B., Liu, Y., Pang, S., et al. (2024) · Angewandte Chemie · doi:10.1002/ange.202416390 · Cited by 5
Buried surface engineering for efficient and stable back-contacted bifacial perovskite solar cells
Liu, H., Yu, Y., Li, D., Liu, N., Han, D., Zhao, Y., Li, N., & Chen, Z. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2025.10.015 · Cited by 4
Solution-processed halide perovskite solar cells: from coating to modules
Mo, Y., Yang, M., Lee, J.-K., & Ge, Z. (2026) · Journal of Materials Science Materials in Energy · doi:10.1007/s44308-025-00012-z · Cited by 6
Ilicheva, E. A., Chuyko, I. A., Luchnikov, L., Sukhorukova, P. K., Saratovsky, N. S., Vasilev, A. A., Alexanyan, L. A., Zarudnyaya, A. A., Dorofeev, D. Y., Kozlov, S. S., et al. (2026) · Solar RRL · doi:10.1002/solr.202500840 · Cited by 4
“However, such stabilization is often documented under relatively mild conditions, such as room temperature [5–7].”
Ruan, C., Li, X., Sun, K., Qiu, J., & Tan, D. (2026) · Opto-Electronic Advances · doi:10.29026/oea.2026.250238 · Cited by 4
Jamesh, M.-I., Tong, H., McKenzie, D. R., Xu, B., Chu, P. K.-H., & Hsu, H. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155794 · Cited by 4
Wide-temperature-range fluid-phase grain boundaries for temperature-robust perovskite solar cells
Zhao, L., Xu, H., Wang, Y. J., Li, Q., Hu, W., Zheng, Y., Yang, B., Wang, Z., Chen, H., Wu, J., et al. (2026) · Nature Photonics · doi:10.1038/s41566-026-01943-x · Cited by 4
Plasma surface engineering for efficient and stable perovskite solar cells and modules
Fan, R., Ma, Y., Xu, S., Cheng, L., Zhang, Z., Li, Y., Liu, H., Bao, Z., Liu, G., Wu, Y., et al. (2026) · Science · doi:10.1126/science.aeg1730 · Cited by 4
Self-citationWhat determines the iodine oxidation reaction kinetics in halide perovskite solar cells?
Yang, R., Liu, X., Zhu, Y., Li, Q., Wang, P., Zhang, Y., Wu, H., Yu, P., Yang, S., & Hou, Y. (2025) · Materials Chemistry Frontiers · doi:10.1039/d5qm00466g · Cited by 4
Wang, L., Li, X., Yuan, S., Qian, F., Kang, Z., & Li, S. (2024) · Symmetry · doi:10.3390/sym16101357 · Cited by 4
Fluid Chemistry of Metal Halide Perovskites
Chen, C., Yao, Q., Wang, J., Ran, C., Chao, L., Xia, Y., & Chen, Y. (2025) · Angewandte Chemie · doi:10.1002/ange.202503593 · Cited by 3
Xu, P., Zhang, Z., Zhang, J., Wang, J., Wang, X., Liu, T., Zhang, W., Sun, X., & Zhao, X. (2025) · Small · doi:10.1002/smll.202508224 · Cited by 3
Self-citationTran, H. N., Yeo, D., Kwun, D., Chitumalla, R. K., Choi, G. C., Jang, J., Jung, I. H., & Seo, J. (2025) · ChemSusChem · doi:10.1002/cssc.202501793 · Cited by 3
All‐Vapor‐Deposited FACs‐Perovskite Solar Modules with Power Conversion Efficiency of >19%
Hou, P., Hu, S., Pan, J., Zhang, Y., Zhu, Y., Hu, M., Cheng, Y., Simonov, A. N., & Lu, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202525366 · Cited by 3
In Situ Generation of Hydrogen Fluoride for F-Doping of Perovskite Quantum Dots
Wang, J., Tao, H., Li, S., Wang, R., Qian, J., & Zhang, X. (2026) · Chemistry of Materials · doi:10.1021/acs.chemmater.6c00080 · Cited by 3
Jiang, C., Cao, X., Liao, X., Liu, T., Ding, P., Song, L. W., Yang, D., & Ge, Z. (2026) · Advanced Functional Materials · doi:10.1002/adfm.75412 · Cited by 4
Self-citationWu, Z., Qiu, Z., Tao, Y., Qiu, Y., Duan, Y., Xia, J., Li, F., & Peng, Q. (2026) · Advanced Science · doi:10.1002/advs.75257 · Cited by 3
“However, scaling up from small-area lab-based p-i-n devices ( < 0.1 cm 2 ) to large-area modules ( > 100 cm 2 ) causes significant efficiency losses, with PCE dropping from > 25% to 20%, which remains a major bottleneck for their industrialization [ 9 ].”
Influential
Metadata
- Authors
- Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., Zhang, Z., & Guo, W.
- Affiliations
- Nanjing University of Aeronautics and Astronautics (CN)
- University of Cambridge (GB)
- Corresponding author
- Zhao, Xiaoming
- Zhang, Peikun
- Liu, Tianjun
- Zhang, Zhuhua
- Guo, Wanlin
- ORCID
- Venue
- Science
- Published
- 2024-07-26
- Volume
- 385
- Issue
- 6707
- Pages
- 433-438
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4400974284
- Semantic Scholar
- e8325b34a27421fa0c4b8d236ca81167896a31ff
- Cited by
- 152
- References
- 70
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 13
- FWCI
- 15.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar modules, device stability, activation energy of degradation, defect formation energy, accelerated aging, power conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.