Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
The ever-increasing power conversion efficiency of perovskite solar cells has illuminated the future of the photovoltaic industry, but the development of commercial devices is hampered by their poor stability. In this study, we report a scalable stabilization method using vapor-phase fluoride treatment, which achieves 18.1%-efficient solar modules (228 square centimeters) with accelerated aging–projected T 80 lifetimes (time to 80% of efficiency remaining) of 43,000 ± 9000 hours under 1-sun illumination at 30°C. The high stability results from vapor-enabled homogeneous fluorine passivation over large-area perovskite surfaces, suppressing defect formation energy and ion diffusion. The extracted degradation activation energy of 0.61 electron volts for solar modules is comparable to that of most reported stable cells, which indicates that modules are not inherently less stable than cells and closes the cell-to-module stability gap.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“yet their operational instability remains a critical barrier to practical deployment”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [12]
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Aristidou, N., Eames, C., Sanchez-Molina, I., Bu, X., Kosco, J., Islam, M. S., & Haque, S. A. (2017) · Nature Communications · doi:10.1038/ncomms15218 · Cited by 1,298
Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films
Shao, Y., Fang, Y., Li, T., Wang, Q., Dong, Q., Deng, Y., Yuan, Y., Wei, H., Wang, M., Gruverman, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00413j · Cited by 1,231
Towards stable and commercially available perovskite solar cells
Park, N.-G., Grätzel, M., Miyasaka, T., Zhu, K., & Emery, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.152 · Cited by 1,182
Li, N., Tao, S., Chen, Y., Niu, X., Onwudinanti, C. K., Hu, C., Qiu, Z., Xu, Z., Zheng, G., Wang, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0382-6 · Cited by 1,167
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Zhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
Wang, Q., Chen, B., Liu, Y., Deng, Y., Bai, Y., Dong, Q., & Huang, J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02941h · Cited by 886
Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Self-citationDamp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Photovoltaic Switching Mechanism in Lateral Structure Hybrid Perovskite Solar Cells
Yuan, Y., Chae, J., Shao, Y., Wang, Q., Xiao, Z., Centrone, A., & Huang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500615 · Cited by 713
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Cubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K
Weller, M. T., Weber, O. J., Frost, J. M., & Walsh, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01432 · Cited by 580
Overcoming the doping bottleneck in semiconductors
Wei, S.-H. (2004) · Computational Materials Science · doi:10.1016/j.commatsci.2004.02.024 · Cited by 573
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells
Zhang, F., Park, S. Y., Yao, C., Lu, H., Dunfield, S. P., Xiao, C., Uličná, S., Zhao, X., Du Hill, L., Chen, X., et al. (2022) · Science · doi:10.1126/science.abj2637 · Cited by 466
Self-citationXing, J., Wang, Q., Dong, Q., Yuan, Y., Fang, Y., & Huang, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06496e · Cited by 437
Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells
Zhang, T., Wang, F., Kim, H.-B., Choi, I.-W., Wang, C., Cho, E., Konefal, R., Puttisong, Y., Terado, K., Kobera, L., et al. (2022) · Science · doi:10.1126/science.abo2757 · Cited by 432
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility
Li, N., Niu, X., Li, L., Wang, H., Huang, Z., Zhang, Y., Chen, Y., Zhang, X., Zhu, C., Zai, H., et al. (2021) · Science · doi:10.1126/science.abh3884 · Cited by 413
Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites
Correa-Baena, J.-P., Luo, Y., Brenner, T. M., Snaider, J., Sun, S., Li, X., Jensen, M. A., Hartono, N. T. P., Nienhaus, L., Wieghold, S., et al. (2019) · Science · doi:10.1126/science.aah5065 · Cited by 364
Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells
Zhao, X., Liu, T., Burlingame, Q. C., Liu, T., Holley, R., Cheng, G., Yao, N., Gao, F., & Loo, Y.-L. (2022) · Science · doi:10.1126/science.abn5679 · Cited by 351
Self-citationLi, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329
Self-citationScalable processing for realizing 21.7%-efficient all-perovskite tandem solar modules
Xiao, K., Lin, Y.-H., Zhang, M., Oliver, R. D. J., Wang, X., Liu, Z., Luo, X., Li, J., Lai, D., Luo, H., et al. (2022) · Science · doi:10.1126/science.abn7696 · Cited by 325
Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06058h · Cited by 290
Towards linking lab and field lifetimes of perovskite solar cells
Jiang, Q., Tirawat, R., Kerner, R. A., Gaulding, E. A., Xian, Y., Wang, X., Newkirk, J. M., Yan, Y., Berry, J. J., & Zhu, K. (2023) · Nature · doi:10.1038/s41586-023-06610-7 · Cited by 282
Intrinsically stable organic solar cells under high-intensity illumination
Burlingame, Q., Huang, X., Liu, X., Jeong, C., Coburn, C., & Forrest, S. R. (2019) · Nature · doi:10.1038/s41586-019-1544-1 · Cited by 280
Layer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Fan, Z., Xiao, H., Wang, Y., Zhao, Z., Lin, Z., Cheng, H.-C., Lee, S.-J., Wang, G., Feng, Z., Goddard, W. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.005 · Cited by 271
Stability of solution-processed MAPbI3 and FAPbI3 layers
Smecca, E., Numata, Y., Deretzis, I., Pellegrino, G., Boninelli, S., Miyasaka, T., La Magna, A., & Alberti, A. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00721j · Cited by 265
Wang, M., Shi, Z., Fei, C., Deng, Z. J. D., Yang, G., Dunfield, S. P., Fenning, D. P., & Huang, J. (2023) · Nature Energy · doi:10.1038/s41560-023-01362-0 · Cited by 253
Advancing 2D Perovskites for Efficient and Stable Solar Cells: Challenges and Opportunities
Zhao, X., Liu, T., & Loo, Y. (2022) · Advanced Materials · doi:10.1002/adma.202105849 · Cited by 247
Self-citationTan, S., Yavuz, I., De Marco, N., Huang, T., Lee, S., Choi, C. S., Wang, M., Nuryyeva, S., Wang, R., Zhao, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906995 · Cited by 243
Zhao, Y., Heumueller, T., Zhang, J., Luo, J., Kasian, O., Langner, S., Kupfer, C., Liu, B., Zhong, Y., Elia, J., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00953-z · Cited by 229
Self-citationZong, Y., Zhou, Y., Zhang, Y., Li, Z., Zhang, L., Ju, M.-G., Chen, M., Pang, S., Zeng, X. C., & Padture, N. P. (2018) · Chem · doi:10.1016/j.chempr.2018.03.005 · Cited by 204
Xie, H., Wang, Z., Chen, Z., Pereyra, C., Pols, M., Gałkowski, K., Anaya, M., Fu, S., Jia, X., Tang, P., et al. (2021) · Joule · doi:10.1016/j.joule.2021.04.003 · Cited by 204
Visualization and Studies of Ion-Diffusion Kinetics in Cesium Lead Bromide Perovskite Nanowires
Pan, D., Fu, Y., Chen, J., Czech, K. J., Wright, J. C., & Jin, S. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b05023 · Cited by 191
Koscher, B. A., Bronstein, N. D., Olshansky, J. H., Bekenstein, Y., & Alivisatos, A. P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08178 · Cited by 178
Sutanto, A. A., Szostak, R., Drigo, N., Queloz, V. I. E., Marchezi, P. E., Germino, J. C., Tolentino, H. C. N., Nazeeruddin, M. K., Nogueira, A. F., & Grancini, G. (2020) · Nano Letters · doi:10.1021/acs.nanolett.0c01271 · Cited by 161
Perini, C. A. R., Rojas‐Gatjens, E., Ravello, M., Castro‐Mendez, A., Hidalgo, J., An, Y., Kim, S., Lai, B. C. H., Li, R., Silva, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202204726 · Cited by 145
Emery, Q., Remec, M., Paramasivam, G., Janke, S., Dagar, J., Ulbrich, C., Schlatmann, R., Stannowski, B., Unger, E., & Khenkin, M. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c14720 · Cited by 143
Molecular Interlayers in Hybrid Perovskite Solar Cells
Deng, W., Liang, X., Kubiak, P. S., & Cameron, P. J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701544 · Cited by 104
An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors
Haillant, O., Dumbleton, D., & Zielnik, A. F. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.02.013 · Cited by 100
Oner, S. M., Sezen, E., Yordanlı, M. S., Karakoc, E., Değer, C., & Yavuz, İ. (2022) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c03645 · Cited by 99
Intrinsic thermal decomposition pathways of lead halide perovskites APbX3
Akbulatov, A. F., Martynenko, V. M., Frolova, L. A., Dremova, N. N., Zhidkov, I. S., Tsarev, S. A., Luchkin, S. Y., Kurmaev, E. Z., Aldoshin, S. M., Stevenson, K. J., et al. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110559 · Cited by 95
How Stable Is the 2D/3D Interface of Metal Halide Perovskite under Light and Heat?
Chakkamalayath, J., Hiott, N., & Kamat, P. V. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02408 · Cited by 89
Kim, Y., Kim, G., Park, E. Y., Moon, C. S., Lee, S. J., Yoo, J. J., Nam, S., Im, J., Shin, S. S., Jeon, N. J., et al. (2023) · Energy & Environmental Science · doi:10.1039/d2ee04045j · Cited by 77
The Auger spectrum of solid ammonia
Larkins, F. P., & Lubenfeld, A. (1979) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(79)87024-3 · Cited by 66
Kettle, J., Stoichkov, V., Kumar, D., Corazza, M. L., Gevorgyan, S. A., & Krebs, F. C. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.04.005 · Cited by 64
Thermal- and Light-Induced Evolution of the 2D/3D Interface in Lead-Halide Perovskite Films
Fiorentino, F., Albaqami, M. D., Poli, I., & Petrozza, A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c09695 · Cited by 56
Luo, J., Liu, B., Yin, H., Zhou, X., Wu, M., Shi, H., Zhang, J., Elia, J., Zhang, K., Wu, J., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-46145-7 · Cited by 51
Self-citationZhou, Y., Yin, Y., Zuo, X., Wang, L., Li, T., Xue, Y., Subramanian, A., Fang, Y., Guo, Y., Yang, Z., et al. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c01675 · Cited by 46
Kodalle, T., Moral, R. F., Scalon, L., Szostak, R., Abdelsamie, M., Marchezi, P. E., Nogueira, A. F., & Sutter‐Fella, C. M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201490 · Cited by 46
Enantiomerically Pure Fullerenes as a Means to Enhance the Performance of Perovskite Solar Cells
Shi, W., Zhuang, Q., Zhou, R., Hou, X., Zhao, X., Kong, J., & Fuchter, M. J. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300054 · Cited by 41
Self-citationAnalysis of degradation kinetics of halide perovskite solar cells induced by light and heat stress
Bahadur, K. D., Shirai, Y., Yanagida, M., Uto, K., & Miyano, K. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111899 · Cited by 40
Reliability of Small Molecule Organic Photovoltaics with Electron‐Filtering Compound Buffer Layers
Burlingame, Q. C., Song, B., Ciammaruchi, L., Zanotti, G., Hankett, J. M., Chen, Z., Katz, E. A., & Forrest, S. R. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601094 · Cited by 35
Ambient Engineering for High-Performance Organic–Inorganic Perovskite Hybrid Solar Cells
Huang, J., Yu, X., Xie, J., Xu, D., Tang, Z., Cui, C., & Yang, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06682 · Cited by 32
Accelerated ageing of organic and perovskite photovoltaics
Burlingame, Q. C., Loo, Y., & Katz, E. A. (2023) · Nature Energy · doi:10.1038/s41560-023-01330-8 · Cited by 27
Gu, W.-M., Zhang, Y., Jiang, K., Yu, G., Xu, Y., Huang, J., Zhang, Y., Wang, F., Li, Y., Lin, Y., et al. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta01888h · Cited by 16
Züfle, S., Hansson, R., Katz, E. A., & Moons, E. (2019) · Solar Energy · doi:10.1016/j.solener.2019.03.020 · Cited by 15
Cited by
Graphene-polymer reinforcement of perovskite lattices for durable solar cells
Li, Q., Zheng, Y., Wang, H., Liu, X., Lin, M., Sui, X., Leng, X., Liu, D., Wei, Z., Song, M., et al. (2025) · Science · doi:10.1126/science.adu5563 · Cited by 216
Vapor-assisted surface reconstruction enables outdoor-stable perovskite solar modules
Sun, X., Shi, W., Liu, T., Cheng, J., Wang, X., Xu, P., Zhang, W., Zhao, X., & Guo, W. (2025) · Science · doi:10.1126/science.adv4280 · Cited by 109
Self-citationDiverse Perovskite Solar Cells: Progress, Challenges, and Perspectives
Zhang, L., Zhang, M., Wang, H., Li, Z., Zhang, Z., Song, Y., Song, X. L., Wang, S., Chen, J., Li, W., et al. (2025) · Advanced Materials · doi:10.1002/adma.202512221 · Cited by 92
Self-citationYuan, L., Xue, Q., Wang, F., Li, N., Waterhouse, G. I. N., Brabec, C. J., Gao, F., & Yan, K. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00663 · Cited by 88
Suo, J., Pettersson, H., & Yang, B. (2025) · EcoMat · doi:10.1002/eom2.12511 · Cited by 71
“Moreover, the stability of PSCs has also been significantly enhanced [2–6], meeting various industry-standard tests, including long-term maximum power point tracking under continuous one-sun illumination, damp heat (85% humidity, 85°C), and temperature cycling tests ( − 40°C to 85°C).”
Metadata
- Authors
- Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., Zhang, Z., & Guo, W.
- Affiliations
- Nanjing University of Aeronautics and Astronautics (CN)
- University of Cambridge (GB)
- Corresponding author
- Zhao, Xiaoming
- Zhang, Peikun
- Liu, Tianjun
- Zhang, Zhuhua
- Guo, Wanlin
- ORCID
- Venue
- Science
- Published
- 2024-07-26
- Volume
- 385
- Issue
- 6707
- Pages
- 433-438
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4400974284
- Semantic Scholar
- e8325b34a27421fa0c4b8d236ca81167896a31ff
- Cited by
- 152
- References
- 70
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 13
- FWCI
- 15.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar modules, device stability, activation energy of degradation, defect formation energy, accelerated aging, power conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.