The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
BackFi: High Throughput WiFi Backscatter
Open accessAbstract
We present BackFi, a novel communication system that enables high throughput, long range communication between very low power backscatter devices and WiFi APs using ambient WiFi transmissions as the excitation signal. Specifically, we show that it is possible to design devices and WiFi APs such that the WiFi AP in the process of transmitting data to normal WiFi clients can decode backscatter signals which the devices generate by modulating information on to the ambient WiFi transmission. We show via prototypes and experiments that it is possible to achieve communication rates of up to 5 Mbps at a range of 1 m and 1 Mbps at a range of 5 meters. Such performance is an order to three orders of magnitude better than the best known prior WiFi backscatter system [27,25]. BackFi design is energy efficient, as it relies on backscattering alone and needs insignificant power, hence the energy consumed per bit is small.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2007) · Electronics: A First Course · doi:10.4324/9780080477527-64 · Cited by 24,923
A review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
Bharadia, D., McMilin, E., & Katti, S. (2013) · Proceedings of the ACM SIGCOMM 2013 conference on SIGCOMM · doi:10.1145/2486001.2486033 · Cited by 1,817
Self-citationAchieving single channel, full duplex wireless communication
Choi, J. I., Jain, M., Srinivasan, K., Levis, P., & Katti, S. (2010) · Proceedings of the sixteenth annual international conference on Mobile computing and networking · doi:10.1145/1859995.1859997 · Cited by 1,524
Self-citationExperiment-Driven Characterization of Full-Duplex Wireless Systems
Duarte, M., Dick, C., & Sabharwal, A. (2012) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2012.102612.111278 · Cited by 1,423
Practical, real-time, full duplex wireless
Jain, M., Choi, J. I., Kim, T., Bharadia, D., Seth, S., Srinivasan, K., Levis, P., Katti, S., & Sinha, P. (2011) · Proceedings of the 17th annual international conference on Mobile computing and networking · doi:10.1145/2030613.2030647 · Cited by 1,367
Self-citationAmbient backscatter: wireless communication out of thin air
Liu, V., Parks, A., Talla, V., Gollakota, S., Wetherall, D., & Smith, J. R. (2013) · Proceedings of the ACM SIGCOMM 2013 conference on SIGCOMM · doi:10.1145/2486001.2486015 · Cited by 1,060
Linear diversity combining techniques
Brennan, D. G. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2002.808163 · Cited by 817
1Passive Self-Interference Suppression for Full-Duplex Infrastructure NodesPreprint
Everett, E., Sahai, A., & Sabharwal, A. (2016) · Cited by 600
Wi-fi backscatter: internet connectivity for RF-powered devices
Kellogg, B., Parks, A., Gollakota, S., Smith, J. R., & Wetherall, D. (2014) · Proceedings of the 2014 ACM conference on SIGCOMM · doi:10.1145/2619239.2626319 · Cited by 568
Theory and measurement of backscattering from RFID tags
Nikitin, P. V., & Rao, K. V. S. (2006) · IEEE Antennas and Propagation Magazine · doi:10.1109/map.2006.323323 · Cited by 500
UWB Systems for Wireless Sensor Networks
Zhang, J., Orlik, P. V., Sahinoglu, Z., Molisch, A. F., & Kinney, P. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2008.2008786 · Cited by 356
Turbocharging ambient backscatter communication
Parks, A. N., Liu, A., Gollakota, S., & Smith, J. R. (2014) · Proceedings of the 2014 ACM conference on SIGCOMM · doi:10.1145/2619239.2626312 · Cited by 324
A 52 $\mu$W Wake-Up Receiver With $-$72 dBm Sensitivity Using an Uncertain-IF Architecture
Pletcher, N. M., Gambini, S., & Rabaey, J. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2007438 · Cited by 321
Bharadia, D., & Katti, S. (2014) · doi:10.5555/2616448.2616482 · Cited by 321
Self-citationMIDU: enabling MIMO full duplex
Aryafar, E., Khojastepour, M. A., Sundaresan, K., Rangarajan, S., & Chiang, M. (2012) · Proceedings of the 18th annual international conference on Mobile computing and networking · doi:10.1145/2348543.2348576 · Cited by 317
Efficient and reliable low-power backscatter networks
Wang, J., Hassanieh, H., Katabi, D., & Indyk, P. (2012) · Proceedings of the ACM SIGCOMM 2012 conference on Applications, technologies, architectures, and protocols for computer communication · doi:10.1145/2342356.2342364 · Cited by 251
Design of a Passively-Powered, Programmable Sensing Platform for UHF RFID Systems
Sample, A. P., Yeager, D. J., Powledge, P. S., & Smith, J. R. (2007) · 2007 IEEE International Conference on RFID · doi:10.1109/rfid.2007.346163 · Cited by 227
On the Impact of Phase Noise on Active Cancelation in Wireless Full-Duplex
Sahai, A., Patel, G., Dick, C., & Sabharwal, A. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2266359 · Cited by 223
Rethinking Indoor Wireless Mesh Design: Low Power, Low Frequency, Full-Duplex
Radunovic, B., Gunawardena, D., Key, P., Proutiere, A., Singh, N., Balan, V., & Dejean, G. (2010) · 2010 Fifth IEEE Workshop on Wireless Mesh Networks · doi:10.1109/wimesh.2010.5507905 · Cited by 190
Ensworth, J. F., & Reynolds, M. S. (2015) · 2015 IEEE International Conference on RFID (RFID) · doi:10.1109/rfid.2015.7113076 · Cited by 179
A 96 Mbit/sec, 15.5 pJ/bit 16-QAM modulator for UHF backscatter communication
Thomas, S. J., & Reynolds, M. S. (2012) · IEEE International Conference on RFID · doi:10.1109/rfid.2012.6193049 · Cited by 147
A 116nW multi-band wake-up receiver with 31-bit correlator and interference rejection
Oh, S., Roberts, N. E., & Wentzloff, D. D. (2013) · IEEE Custom Integrated Circuits Conference (CICC) · doi:10.1109/cicc.2013.6658500 · Cited by 98
Zhang, P., Hu, P., Pasikanti, V., et al. (2014) · Proceedings of the 28th Annual International Conference on Mobile Computing And Networking · doi:10.1145/2639108.2639138 · Cited by 93
On the limits of effective hybrid micro-energy harvesting on mobile CRFID sensors
Gummeson, J., Clark, S. S., Fu, K., & Ganesan, D. (2010) · International Conference on Mobile Systems, Applications, and Services · doi:10.1145/1814433.1814454 · Cited by 90
Bharadia, D., & Katti, S. R. (2014) · doi:10.1145/2619239.2626327 · Cited by 79
Self-citationUltra-low power wake -up receivers for wireless sensor networks
Pletcher, N. M. (2008) · Cited by 59
Cited by
Ambient Backscatter Communications: A Contemporary Survey
Van Huynh, N., Hoang, D. T., Lu, X., Niyato, D., Wang, P., & Kim, D. I. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2841964 · Cited by 932
LoRa Backscatter: Enabling The Vision of Ubiquitous Connectivity
Talla, V., Hessar, M., Kellogg, B., Najafi, A., Smith, J. R., & Gollakota, S. (2017) · Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies · doi:10.1145/3130970 · Cited by 443
Ambient Backscatter Communication Systems: Detection and Performance Analysis
Wang, G., Gao, F., Fan, R., & Tellambura, C. (2016) · IEEE Transactions on Communications · doi:10.1109/tcomm.2016.2602341 · Cited by 427
Cooperative Ambient Backscatter Communications for Green Internet-of-Things
Yang, G., Zhang, Q., & Liang, Y.-C. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2799848 · Cited by 407
Inter-Technology Backscatter: Towards Internet Connectivity for Implanted Devices
Iyer, V., Talla, V., Kellogg, B., Gollakota, S., & Smith, J. (2016) · Proceedings of the 2016 ACM SIGCOMM Conference · doi:10.1145/2934872.2934894 · Cited by 367
Metadata
- Authors
- Bharadia, D., Joshi, K. R., Kotaru, M., & Katti, S.
- Venue
- Proceedings of the 2015 ACM Conference on Special Interest Group on Data Communication
- Publisher
- ACM
- Published
- 2015-08-17
- Pages
- 283-296
- OpenAlex
- W1994803221
- Cited by
- 337
- References
- 27
- FWCI
- 53.40
- Type
- conference paper
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.