The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
A moving least squares material point method with displacement discontinuity and two-way rigid body coupling
Abstract
In this paper, we introduce the Moving Least Squares Material Point Method (MLS-MPM). MLS-MPM naturally leads to the formulation of Affine Particle-In-Cell (APIC) [Jiang et al. 2015] and Polynomial Particle-In-Cell [Fu et al. 2017] in a way that is consistent with a Galerkin-style weak form discretization of the governing equations. Additionally, it enables a new stress divergence discretization that effortlessly allows all MPM simulations to run two times faster than before. We also develop a Compatible Particle-In-Cell (CPIC) algorithm on top of MLS-MPM. Utilizing a colored distance field representation and a novel compatibility condition for particles and grid nodes, our framework enables the simulation of various new phenomena that are not previously supported by MPM, including material cutting, dynamic open boundaries, and two-way coupling with rigid bodies. MLS-MPM with CPIC is easy to implement and friendly to performance optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Belytschko, T., Lu, Y. Y., & Gu, L. (1994) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620370205 · Cited by 5,648
The finite element method. Linear static and dynamic finite element analysis
Zimmermann, T. (1987) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(87)90013-2 · Cited by 5,080
The Finite Element Method: Linear Static and Dynamic Finite Element Analysis
Hughes, T. J. R. (1987) · Cited by 4,852
Reproducing kernel particle methods
Liu, W. K., Jun, S., & Zhang, Y. F. (1995) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.1650200824 · Cited by 2,886
Surfaces generated by moving least squares methods
Lancaster, P., & Salkauskas, K. (1981) · Mathematics of Computation · doi:10.1090/s0025-5718-1981-0616367-1 · Cited by 2,591
Application of a particle-in-cell method to solid mechanics
Sulsky, D., Zhou, S.-J., & Schreyer, H. L. (1995) · Computer Physics Communications · doi:10.1016/0010-4655(94)00170-7 · Cited by 1,028
Particle-Based Fluid Simulation for Interactive Applications
Müller, M., Charypar, D., & Groß, M. H. (2003) · doi:10.2312/sca03/154-159 · Cited by 999
Müller, M., Heidelberger, B., Hennix, M., & Ratcliff, J. (2007) · Journal of Visual Communication and Image Representation · doi:10.1016/j.jvcir.2007.01.005 · Cited by 927
The approximation power of moving least-squares
Levin, D. (1998) · Mathematics of Computation · doi:10.1090/s0025-5718-98-00974-0 · Cited by 808
Image deformation using moving least squares
Schaefer, S., McPhail, T., & Warren, J. (2006) · ACM Transactions on Graphics · doi:10.1145/1141911.1141920 · Cited by 674
FLIP: A method for adaptively zoned, particle-in-cell calculations of fluid flows in two dimensions
Brackbill, J. U., & Ruppel, H. M. (1986) · Journal of Computational Physics · doi:10.1016/0021-9991(86)90211-1 · Cited by 650
Zhu, Y., & Bridson, R. (2005) · ACM Transactions on Graphics · doi:10.1145/1073204.1073298 · Cited by 648
Self-citationA material point method for snow simulation
Stomakhin, A., Schroeder, C., Chai, L., Teran, J. M., & Selle, A. P. (2013) · ACM Transactions on Graphics · doi:10.1145/2461912.2461948 · Cited by 611
Robust moving least-squares fitting with sharp features
Fleishman, S., Cohen-Or, D., & Silva, C. T. (2005) · ACM Transactions on Graphics · doi:10.1145/1073204.1073227 · Cited by 580
A Terradynamics of Legged Locomotion on Granular Media
Li, C., Zhang, T., & Goldman, D. I. (2013) · Science · doi:10.1126/science.1229163 · Cited by 467
Unified particle physics for real-time applications
Macklin, M., Müller, M., Chentanez, N., & Kim, T.-Y. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601152 · Cited by 447
Graphical modeling and animation of ductile fracture
O'Brien, J. F. (2002) · Proceedings of the 29th International Conference on Computer Graphics and Interactive Techniques. Electronic Art and Animation Catalog. · doi:10.1145/2931127.2931215 · Cited by 425
Macklin, M., & Müller, M. (2013) · ACM Transactions on Graphics · doi:10.1145/2461912.2461984 · Cited by 416
The affine particle-in-cell method
Jiang, C., Schroeder, C., Selle, A. P., Teran, J. M., & Stomakhin, A. (2015) · ACM Transactions on Graphics · doi:10.1145/2766996 · Cited by 409
Self-citationProceedings of Graphics Interface 2007 on - GI '07
(2007) · Proceedings · doi:10.1145/1268517 · Cited by 399
Müller, M., & Groß, M. H. (2004) · Cited by 393
Point based animation of elastic, plastic and melting objects
M�ller, M., Keiser, R., Nealen, A., Pauly, M., Gross, M., & Alexa, M. (2004) · Proceedings of the 2004 ACM SIGGRAPH/Eurographics symposium on Computer animation - SCA '04 · doi:10.1145/1028523.1028542 · Cited by 388
Invertible finite elements for robust simulation of large deformation
Irving, G., Teran, J., & Fedkiw, R. (2004) · Proceedings of the 2004 ACM SIGGRAPH/Eurographics symposium on Computer animation - SCA '04 · doi:10.1145/1028523.1028541 · Cited by 350
Analysis and reduction of quadrature errors in the material point method (MPM)
Steffen, M., Kirby, R. M., & Berzins, M. (2008) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2360 · Cited by 338
Graphical modeling and animation of brittle fracture
O'Brien, J. F., & Hodgins, J. K. (1999) · Proceedings of the 26th annual conference on Computer graphics and interactive techniques - SIGGRAPH '99 · doi:10.1145/311535.311550 · Cited by 328
Versatile rigid-fluid coupling for incompressible SPH
Akinci, N., Ihmsen, M., Akinci, G., Solenthaler, B., & Teschner, M. (2012) · ACM Transactions on Graphics · doi:10.1145/2185520.2185558 · Cited by 314
Losasso, F., Shinar, T., Selle, A. P., & Fedkiw, R. P. (2006) · ACM Transactions on Graphics · doi:10.1145/1141911.1141960 · Cited by 252
Rigid fluid: animating the interplay between rigid bodies and fluid
Carlson, M., Mucha, P. J., & Turk, G. (2004) · ACM Transactions on Graphics · doi:10.1145/1015706.1015733 · Cited by 231
A fast variational framework for accurate solid-fluid coupling
Batty, C., Bertails, F., & Bridson, R. (2007) · ACM Transactions on Graphics · doi:10.1145/1276377.1276502 · Cited by 231
A virtual node algorithm for changing mesh topology during simulation
Molino, N., Bao, Z., & Fedkiw, R. (2004) · ACM Transactions on Graphics · doi:10.1145/1015706.1015734 · Cited by 221
The material point method for simulating continuum materials
Jiang, C., Schroeder, C., Teran, J., Stomakhin, A., & Selle, A. (2016) · ACM SIGGRAPH 2016 Courses · doi:10.1145/2897826.2927348 · Cited by 214
Self-citationMeshless animation of fracturing solids
Pauly, M., Keiser, R., Adams, B., Dutré, P., Gross, M., & Guibas, L. J. (2005) · ACM Transactions on Graphics · doi:10.1145/1073204.1073296 · Cited by 205
A fast variational framework for accurate solid-fluid coupling
Batty, C., Bertails, F., & Bridson, R. (2007) · ACM SIGGRAPH 2007 papers · doi:10.1145/1275808.1276502 · Cited by 202
Coupling water and smoke to thin deformable and rigid shells
Guendelman, E., Selle, A., Losasso, F., & Fedkiw, R. (2005) · ACM Transactions on Graphics · doi:10.1145/1073204.1073299 · Cited by 185
Continuum Foam: A Material Point Method for Shear-Dependent Flows
Yue, Y., Smith, B., Batty, C., Zheng, C., & Grinspun, E. (2015) · ACM Transactions on Graphics · doi:10.1145/2751541 · Cited by 179
Drucker-prager elastoplasticity for sand animation
Klár, G., Gast, T., Pradhana, A., Fu, C., Schroeder, C., Jiang, C., & Teran, J. (2016) · ACM Transactions on Graphics · doi:10.1145/2897824.2925906 · Cited by 174
Self-citationAugmented MPM for phase-change and varied materials
Stomakhin, A., Schroeder, C., Jiang, C., Chai, L., Teran, J., & Selle, A. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601176 · Cited by 169
Self-citationProceedings of Graphics Interface 2013
Samavati, F. F., & Hawkey, K. (2013) · Graphics Interface · Cited by 167
Anisotropic elastoplasticity for cloth, knit and hair frictional contact
Jiang, C., Gast, T. F., & Teran, J. M. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3073623 · Cited by 157
Self-citationMulti-species simulation of porous sand and water mixtures
Pradhana, A., Gast, T. F., Klár, G., Fu, C., Teran, J. M., Jiang, C., & Museth, K. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3073651 · Cited by 151
Self-citationPower particles: an incompressible fluid solver based on power diagrams
de Goes, F., Wallez, C., Huang, J., Pavlov, D., & Desbrun, M. (2015) · ACM Transactions on Graphics · doi:10.1145/2766901 · Cited by 135
Optimization Integrator for Large Time Steps
Gast, T. F., Schroeder, C., Stomakhin, A., Jiang, C., & Teran, J. M. (2015) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2015.2459687 · Cited by 134
Self-citationUnified simulation of elastic rods, shells, and solids
Martín, S., Kaufmann, P., Botsch, M., Grinspun, E., & Groß, M. H. (2010) · ACM Transactions on Graphics · doi:10.1145/1778765.1778776 · Cited by 120
An angular momentum conserving affine-particle-in-cell method
Jiang, C., Schroeder, C., & Teran, J. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.02.050 · Cited by 111
Self-citationArbitrary cutting of deformable tetrahedralized objects
Sifakis, E. D., Der, K. G., & Fedkiw, R. P. (2007) · doi:10.5555/1272690.1272701 · Cited by 108
Direct Forcing for Lagrangian Rigid-Fluid Coupling
Becker, M., Tessendorf, H., & Teschner, M. (2008) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2008.107 · Cited by 107
A material point method for viscoelastic fluids, foams and sponges
Ram, D., Gast, T. F., Jiang, C., Schroeder, C., Stomakhin, A., Teran, J. M., & Kavehpour, P. (2015) · ACM SIGGRAPH/Eurographics Symposium on Computer Animation (SCA) · doi:10.1145/2786784.2786798 · Cited by 96
Self-citationAdaptive tearing and cracking of thin sheets
Pfaff, T., Narain, R., de Joya, J. M., & O’Brien, J. F. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601132 · Cited by 92
An adaptive generalized interpolation material point method for simulating elastoplastic materials
Gao, M., Pradhana, A., Jiang, C., & Sifakis, E. D. (2017) · ACM Transactions on Graphics · doi:10.1145/3130800.3130879 · Cited by 86
Self-citationDensity maps for improved SPH boundary handling
Koschier, D., & Bender, J. (2017) · ACM SIGGRAPH/Eurographics Symposium on Computer Animation (SCA) · doi:10.1145/3099564.3099565 · Cited by 62
Simultaneous coupling of fluids and deformable bodies
Chentanez, N., Goktekin, T. G., Feldman, B. E., & O’Brien, J. F. (2006) · Symposium on Computer Animation · doi:10.5555/1218064.1218075 · Cited by 57
Robust eXtended finite elements for complex cutting of deformables
Koschier, D., Bender, J., & Thuerey, N. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3073666 · Cited by 56
Physics-inspired adaptive fracture refinement
Chen, Z., Yao, M., Feng, R., et al. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601115 · Cited by 25
Belytschko, T., Rabczuk, T., Huerta, A., et al. (2004) · doi:10.1002/0470091355.ecm005 · Cited by 23
Cited by
Learning to Simulate Complex Physics with Graph Networks
Sánchez‐González, Á., Godwin, J., Pfaff, T., Ying, R., Leskovec, J., & Battaglia, P. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2002.09405 · Cited by 413
Taichi: a language for high-performance computation on spatially sparse data structures
Hu, Y., Li, T.-M., Anderson, L., Ragan-Kelley, J., & Durand, F. (2019) · ACM Transactions on Graphics · doi:10.1145/3355089.3356506 · Cited by 257
Self-citationDiSECt: A Differentiable Simulation Engine for Autonomous Robotic Cutting
Heiden, E., Macklin, M., Narang, Y., Fox, D., Garg, A., & Ramos, F. (2021) · Robotics: Science and Systems XVII · doi:10.15607/rss.2021.xvii.067 · Cited by 66
Metadata
- Authors
- Hu, Y., Fang, Y., Ge, Z., Qu, Z., Zhu, Y., Pradhana, A., & Jiang, C.
- Venue
- ACM Transactions on Graphics
- Published
- 2018-07-30
- Volume
- 37
- Issue
- 4
- Pages
- 1-14
- ISSN
- 0730-0301 (ISSN-L)
- 1557-7368
- OpenAlex
- W2810873357
- Cited by
- 274
- References
- 54
- FWCI
- 15.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.