Learning Success in Immersive Virtual Reality Training Environments: Practical Evidence from Automotive Assembly
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Learning success in assembly training using immersive virtual reality technologies depends on multiple factors ranging from quality levels of process and technical documentation, visual 3D rendering quality, maturity of didactic concepts to individual differences and attitudes of workers and trainers. In this paper, we present the results of a field study conducted in an automotive factory to evaluate an immersive virtual reality training environment (VTE). Set up under real training conditions, the VTE was operated by trainers to train novice assembly line workers on a specific task: the assembly of a vehicle center console. Using a between-subject design we compare training performance in terms of skill transfer and retention between workers being trained in the VTE to workers who had been trained conventionally on the physical car. Our results suggest positive transfer of the acquired procedures from the VTE to physical assembly and even performance improvements over time. We discuss learning success in the VTE in contrast to user experience feedback and the implemented sequence steps for mounting assembly parts, based on comprehensive behavioral data. Finally, reflections on trainer feedback lead the way to implications for the adaption of didactic strategies and operational procedures towards increasing overall effectiveness of VTE-supported assembly training.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“while another stated the ergonomics of their HMD as a reason [97].”
From A systematic review of immersive virtual reality for industrial skills training (2021) · cites this paper as [97]
Citations
Cites
Evaluating Training Programs : The Four Levels
Kirkpatrick, D. L. (2009) · Cited by 4,720
Slater, M., & Wilbur, S. (1997) · Presence: Teleoperators and Virtual Environments · doi:10.1162/pres.1997.6.6.603 · Cited by 3,034 · cited 1×
“While immersion can be an objective and quantifiable description of what a particular system offers, presence encompasses a state of consciousness that includes the (psychological) feeling of being in a virtual environment (Slater & Wilbur, 1997 [29]).”
BackgroundGavish, N., Gutiérrez, T., Webel, S., Rodríguez, J., Peveri, M., Bockholt, U., & Tecchia, F. (2015) · Interactive Learning Environments · doi:10.1080/10494820.2013.815221 · Cited by 680
State of the art of virtual reality technology
Anthes, C., Garcia-Hernandez, R. J., Wiedemann, M., & Kranzlmuller, D. (2016) · 2016 IEEE Aerospace Conference · doi:10.1109/aero.2016.7500674 · Cited by 541
A Survey of Usability Evaluation in Virtual Environments: Classification and Comparison of Methods
Bowman, D. A., Gabbard, J. L., & Hix, D. (2002) · Presence: Teleoperators and Virtual Environments · doi:10.1162/105474602760204309 · Cited by 375
Virtual reality as a tool for verification of assembly and maintenance processes
Gomes de Sá, A., & Zachmann, G. (1999) · Computers & Graphics · doi:10.1016/s0097-8493(99)00047-3 · Cited by 368 · cited 1×
“In conventional assembly training certain quality assurance mechanisms are typically implemented in the training procedure [9].”
BackgroundVirtual Reality-based pilot training for underground coal miners
Grabowski, A., & Jankowski, J. (2015) · Safety Science · doi:10.1016/j.ssci.2014.09.017 · Cited by 219 · cited 1×
“medicine [1], emergency and safety training [13], as well as physical [23], social and cognitive skills training [5].”
BackgroundFuture directions for the development of virtual reality within an automotive manufacturer
Lawson, G., Salanitri, D., & Waterfield, B. (2016) · Applied Ergonomics · doi:10.1016/j.apergo.2015.06.024 · Cited by 218 · cited 2×
“Based on earlier recommendations for implementations of VR systems [22], we implemented collision detection.”
BackgroundMethodBüttner, S., Mucha, H., Funk, M., Kosch, T., Aehnelt, M., Robert, S., & Röcker, C. (2017) · Proceedings of the 10th International Conference on PErvasive Technologies Related to Assistive Environments · doi:10.1145/3056540.3076193 · Cited by 124
Virtual Training: Learning Transfer of Assembly Tasks
Carlson, P., Peters, A., Gilbert, S. B., Vance, J. M., & Luse, A. (2015) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2015.2393871 · Cited by 117
Ganier, F., Hoareau, C., & Tisseau, J. (2014) · Ergonomics · doi:10.1080/00140139.2014.899628 · Cited by 103 · cited 1×
“[11] investigated learning transfer from VTE to the real world.”
BackgroundA Comparison of Virtual and Physical Training Transfer of Bimanual Assembly Tasks
Murcia-Lopez, M., & Steed, A. (2018) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2018.2793638 · Cited by 83 · cited 1×
“[24] compared conventional paper- and video-based training to virtual training of a bi-manual assembly task.”
BackgroundPhysical Fidelity Versus Cognitive Fidelity Training in Procedural Skills Acquisition
Hochmitz, I., & Yuviler-Gavish, N. (2011) · Human Factors The Journal of the Human Factors and Ergonomics Society · doi:10.1177/0018720811412777 · Cited by 74 · cited 1×
“(2011) [18] "virtual sub-tasks might be very similar to real ones, but not identical to them", leaving trainees to underestimate the effort to assemble the physical parts in reality (e.”
BackgroundThe Influence of Interaction Technology on the Learning of Assembly Tasks Using Virtual Reality
Vélaz, Y., Rodríguez-Arce, J., Gutiérrez, T., Lozano-Rodero, A., & Suescun, Á. (2014) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4028588 · Cited by 56 · cited 1×
“[31] investigated the influence of interaction technologies on training transfer in a between-subject study with 60 participants.”
BackgroundSu, X., Dunston, P. S., Proctor, R. W., & Wang, X. (2013) · Automation in Construction · doi:10.1016/j.autcon.2013.05.029 · Cited by 45 · cited 1×
“[30] investigated the influence of training schedule in a virtual training system, but found no significant differences between mixed practice schedule and blocked practise schedule.”
BackgroundDeceptiBike: Assessing the Perception of Speed Deception in a Virtual Reality Training Bike System
Löchtefeld, M., Krüger, A., & Gellersen, H. W. (2016) · Nordic Conference on Human-Computer Interaction · doi:10.1145/2971485.2971513 · Cited by 45
Virtual Reality Simulator for Construction workers
Hafsia, M., Monacelli, É., & Martin, H. (2018) · doi:10.1145/3234253.3234298 · Cited by 42 · cited 1×
“Virtual training environments (VTEs) can have certain benefits over real world training such as reducing product fabrication time, therefore reducing time-to-market [19], as well as potentially lowering costs related to material wear from repeated exposure to assembly and disassembly operations [16] or controlling saf…”
BackgroundWeber, B., Sagardia, M., Hulin, T., & Preusche, C. (2013) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-39405-8_28 · Cited by 27 · cited 1×
“Although collision detection was notified by both visual and vibrotactile feedback via the controllers [32], workers did not achieve to significantly reduce collisions in the VTE.”
BackgroundEvaluation of Internal and External Validity of a Virtual Environment for Learning a Long Procedure
Hoareau, C., Querrec, R., Buche, C., & Ganier, F. (2017) · International Journal of Human-Computer Interaction · doi:10.1080/10447318.2017.1286768 · Cited by 26 · cited 1×
“Overall the correct placement of parts and the adherence to time limits could be successfully transferred to real assembly (part positioning), which in turn referring to [17], let us conclude that the setup kept the gap between knowledge acquisition context and context of knowledge retrieval considerably low.”
BackgroundDevelopment and evaluation of a virtual training environment for on-line robot programming
Nathanael, D., Mosialos, S., & Vosniakos, G.-C. (2016) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2016.02.004 · Cited by 19 · cited 2×
“[25] evaluated training on industrial robot programming in the conditions, virtual, virtual augmented and real world.”
BackgroundAssessing the QoE Impact of 3D Rendering Style in the Context of VR-based Training
Schatz, R., Regal, G., Schwarz, S., Stefan, S., & Kempf, M. (2018) · International Conference on Quality of Multimedia Experience (QoMEX) · doi:10.1109/qomex.2018.8463411 · Cited by 16 · cited 1×
“A training session with a duration of two to three minutes per cycle should hardly cause any discomfort in this context, as long as the rendering quality is sufficiently high [28].”
BackgroundSelf-citationImmersion at scale: Researcher's guide to ecologically valid mobile experiments
Oh, S. Y., Shriram, K., Laha, B., Baughman, S., Ogle, E., & Bailenson, J. N. (2016) · IEEE Conference on Virtual Reality and 3D User Interfaces (VR) · doi:10.1109/vr.2016.7504747 · Cited by 15 · cited 2×
“For the realization of field studies Oh et al. (2016) recommend to make certain preparations in order to ensure the reasonableness for participants and to minimize disturbing factors (e.g. [26]).”
BackgroundGalimberti, C., & Belloni, G. M. (2003) · CyberPsychology & Behavior · doi:10.1089/109493103322011506 · Cited by 8
Research works printed but not linked: 10
- 10.3389/fpsyg.2018.01658 · DOI
- 10.1007/s10055-008-0093-y · DOI · Paper page
- D. A. Bowman and R. P. McMahan. 2007. Virtual Reality: How Much Immersion Is Enough?Computer 40, 7 (2007), 36–43.
- 10.1111/j.1467-8535.2009.01038.x · DOI · Paper page
- Sandra G Hart and Lowell E Staveland. 1988. Development of NASA-TLX (Task Load Index): Results of empirical and theoretical research. In Advances in psychology. Vol. 52. Elsevier, North-Holland, 139–183.
- S. Hermawati, G. Lawson, M. D’Cruz, F. Arlt, J. Apold, L. Andersson, M. G. Lövgren, and L. Malmsköld. 2015. Understanding the complex needs of automotive training at final assembly lines. Applied Ergonomics 46, 1997 (2015), 144–157.
- Sankar Jayaram, Hugh I Connacher, and Kevin W Lyons. 1997. Virtual assembly using virtual reality techniques. Computer-aided design 29, 8 (1997), 575–584.
- 10.1145/3355056.3364587 · DOI
- David Martinez Oliveira, Sandra Castro Cao, Xulio Fernandez Hermida, and Fernando Martin Rodriguez. 2007. Virtual Reality System for Industrial Training. 2007 IEEE International Symposium on Industrial ElectronicsJuly (2007), 1715–1720. https://doi.org/10.1109/ISIE.2007.4374863 · DOI
- Eugen Yin-Cheung Wong, Kaylee Hao Kong, and Ray Tak-Yin Hui. 2017. The influence of learners’ openness to IT experience on the attitude and perceived learning effectiveness with virtual reality technologies. In IEEE 6th International Conference on Teaching, Assessment, and Learning for Engineering (TALE. IEEE, IEEE, Hong Kong, 118–123.
Cited by
A systematic review of immersive virtual reality for industrial skills training
Radhakrishnan, U., Koumaditis, K., & Chinello, F. (2021) · Behaviour & Information Technology · doi:10.1080/0144929x.2021.1954693 · Cited by 200
“…did not penetrate a virtual body (no physical interaction was involved) (Bálint, Macías, and Althoefer 2019). haptics (Liang, Zhou, and Gao 2019; Schwarz et al. 2020; Winther et al. 2020) can be observed as well as one case each in pseudo-haptics (Jain et al. 2020) and grounded haptics…”
BackgroundZechner, O., Kleygrewe, L., Jaspaert, E., Schrom-Feiertag, H., Hutter, V., & Tscheligi, M. (2023) · Multimodal Technologies and Interaction · doi:10.3390/mti7020014 · Cited by 107
“In several industries it has proven itself as cost-effective, engaging and provides opportunities to include objective performance measurement techniques as well as a high degree of personalization [11–13].”
Development of Virtual Reality Automotive Lab for Training in Engineering Students
Hernández-Chávez, M., Cortés-Caballero, J. M., Pérez-Martínez, Á. A., Hernández-Quintanar, L. F., Roa-Tort, K., Rivera-Fernández, J. D., & Fabila-Bustos, D. A. (2021) · Sustainability · doi:10.3390/su13179776 · Cited by 88
“The development and implementation of these virtual immersive teaching-learning tools in the academic training of automotive engineering students will allow them to be profiled towards what they will find in their professional”
BackgroundBurova, A., Mäkelä, J., Heinonen, H., Palma, P. B., Hakulinen, J., Opas, V., Siltanen, S., Raisamo, R., & Turunen, M. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103663 · Cited by 65
Bödding, R., Schriek, S. A., & Maier, G. W. (2025) · Virtual Reality · doi:10.1007/s10055-025-01118-z · Cited by 72
Metadata
- Authors
- Schwarz, S., Regal, G., Kempf, M., & Schatz, R.
- Affiliations
- AIT Austrian Institute of Technology GmbH (AT)
- innovation.rocks GmbH, Austria
- Venue
- Proceedings of the 11th Nordic Conference on Human-Computer Interaction: Shaping Experiences, Shaping Society
- Publisher
- ACM
- Published
- 2020-10-25
- Pages
- 1-11
- OpenAlex
- W3097679690
- Cited by
- 40
- References
- 22
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 9 · 2023: 9 · 2022: 9 · 2021: 3
- FWCI
- 3.84
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Nordic Conference on Human-Computer Interaction (publishedVersion)
- Funders
- Wirtschaftsagentur Wien (1609083)
- Topics
- Physical Sciences › Computer Science › Human-Computer Interaction › Virtual Reality Applications and Impacts
- Physical Sciences › Engineering › Control and Systems Engineering › Simulation and Modeling Applications
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Augmented Reality Applications
- Keywords
- immersive virtual reality, assembly training, automotive assembly, skill transfer, retention, training performance, teaching methods, user experience, novice workers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.