The DOI matches its Crossref record.
Water and Methanol Uptakes in Nafion Membranes and Membrane Effects on Direct Methanol Cell Performance
Abstract
This paper compares direct methanol fuel cells (DMFCs) employing two types of Nafion® (E.I. DuPont de Nemours and Company) membranes of different equivalent weight (EW). Methanol and water uptakes in 1100 and 1200 EW Nafion membranes were determined by weighing and methanol solution‐equilibrated membranes. Both methanol and water uptakes in the 1200 EW membrane were about 70–74% of those in the 1100 EW membrane. The methanol crossover rate corresponding to that in a DMFC at open circuit was measured using a voltammetric method in the DMFC configuration and under the same cell operating conditions. After accounting for the thickness difference between the membrane samples, the methanol crossover rate through a 1200 EW membrane was 52% of that through an 1100 EW membrane. To resolve the cathode and anode performances in an operating DMFC, a dynamic hydrogen electrode was used as a reference electrode. Results show that in an operating DMFC the cathode can be easily flooded, as shown in a DMFC using 1100 EW membrane. An increase in methanol crossover rate decreases the DMFC cathode potential at open circuit. At a high cell current density, the DMFC cathode potential can approach that of a cell. © 2000 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051
Fundamental Models for Fuel Cell Engineering
Wang, C.-Y. (2004) · Chemical Reviews · doi:10.1021/cr020718s · Cited by 1,266
Fuel Cells: Principles, Types, Fuels, and Applications
Carrette, L., Friedrich, K. A., & Stimming, U. (2000) · ChemPhysChem · doi:10.1002/1439-7641(20001215)1:4<162::aid-cphc162>3.0.co;2-z · Cited by 919
AC impedance technique in PEM fuel cell diagnosis—A review
YUAN, X., WANG, H., COLINSUN, J., & ZHANG, J. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.05.036 · Cited by 711
Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells
Pasaogullari, U., & Wang, C. Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1646148 · Cited by 631
Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications
Tripathi, B. P., & Shahi, V. K. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.005 · Cited by 576
Polymer electrolyte membranes for the direct methanol fuel cell: A review
DeLuca, N. W., & Elabd, Y. A. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20861 · Cited by 459
Recent approaches to improve Nafion performance for fuel cell applications: A review
Karimi, M. B., Mohammadi, F., & Hooshyari, K. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.09.096 · Cited by 450
Li, X., & Faghri, A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.061 · Cited by 398
Electrochemical technologies for wastewater treatment and resource reclamation
Feng, Y., Yang, L., Liu, J., & Logan, B. E. (2016) · Environmental Science: Water Research & Technology · doi:10.1039/c5ew00289c · Cited by 371
Blended and cross-linked ionomer membranes for application in membrane fuel cells
Kerres, J. A. (2005) · Fuel Cells · doi:10.1002/fuce.200400079 · Cited by 341
Mathematical Modeling of Liquid-Feed Direct Methanol Fuel Cells
Wang, Z. H., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1559061 · Cited by 335
Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells
Pasaogullari, U., & Wang, C.-Y. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850339 · Cited by 310
Crossover of formic acid through Nafion® membranes
Rhee, Y.-W., Ha, S. Y., & Masel, R. I. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00352-5 · Cited by 291
Ruthenium Crossover in Direct Methanol Fuel Cell with Pt-Ru Black Anode
Piela, P., Eickes, C., Brosha, E., Garzon, F., & Zelenay, P. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1814472 · Cited by 280
Direct methanol fuel cells: progress in cell performance and cathode research
THOMAS, S. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00344-4 · Cited by 278
Investigation of Mass-Transport Limitations in the Solid Polymer Fuel Cell Cathode
Jaouen, F., Lindbergh, G., & Sundholm, G. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1456916 · Cited by 275
Bauer, F., Denneler, S., & Willert‐Porada, M. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20367 · Cited by 275
Baranton, S., Coutanceau, C., Roux, C., Hahn, F., & Léger, J.-M. (2005) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2004.11.034 · Cited by 264
Jiang, R., Kunz, H. R., & Fenton, J. M. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.07.026 · Cited by 261
Jiang, S. P., Liu, Z., & Tian, Z. Q. (2006) · Advanced Materials · doi:10.1002/adma.200502462 · Cited by 253
Miyake, N., Wainright, J. S., & Savinell, R. F. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1383072 · Cited by 252
Transport properties of ionomer composite membranes for direct methanol fuel cells
Dimitrova, P., Friedrich, K. A., Vogt, B., & Stimming, U. (2002) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(02)01006-9 · Cited by 207
Allcock, H. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00702-5 · Cited by 168
Sulfonated Poly(ether ether ketone) Membranes for Direct Methanol Fuel Cells
Yang, B., & Manthiram, A. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1613073 · Cited by 139
High temperature transport properties of polyphosphazene membranes for direct methanol fuel cells
Zhou, X., Weston, J., Chalkova, E., Hofmann, M. A., Ambler, C. M., Allcock, H. R., & Lvov, S. N. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00201-9 · Cited by 117
Experimental Determination of Electro-Osmotic Drag Coefficient in Nafion Membrane for Fuel Cells
Ge, S., Yi, B., & Ming, P. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2203934 · Cited by 116
Evaluation of methanol crossover in proton-conducting polyphosphazene membranes
Fedkin, M. V., Zhou, X., Hofmann, M. A., Chalkova, E., Weston, J. A., Allcock, H. R., & Lvov, S. N. (2002) · Materials Letters · doi:10.1016/s0167-577x(01)00391-3 · Cited by 77
Li, W., Fu, Y.-Z., Manthiram, A., & Guiver, M. D. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3040242 · Cited by 23
The Membrane–Electrode Interface in PEFCs
Kim, Y. S., & Pivovar, B. S. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3481580 · Cited by 22
Li, W., Bellay, A., Fu, Y.-Z., & Manthiram, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.067 · Cited by 14
Metadata
- Authors
- Ren, X., Springer, T. E., & Gottesfeld, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2000
- Volume
- 147
- Issue
- 1
- Pages
- 92
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2023893961
- Cited by
- 401
- References
- 0
- FWCI
- 21.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.