The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A Sodium-Ion Cell Based on the Fluorophosphate Compound NaVPO[sub 4]F
Open accessAbstract
Preliminary performance data is presented for a novel sodium-ion cell based on a hard chemistry. To our knowledge this is the first time that a viable sodium-ion system based on a polyanion cathode material has been demonstrated. The was prepared by a simple incorporation reaction involving vanadium(III) phosphate, and NaF. The hard carbon was from a commercial source. Constant current cycling indicated reversible alkali-ion insertion behavior for the fluorophosphate material, while the generally symmetrical nature of the charge/discharge curves indicated the energetic reversibility of the insertion system. The average discharge voltage for the sodium-ion cells was demonstrated to around 3.7 V, a figure comparable with commercially available lithium-ion cells. The reversible specific capacities for the cathode and anode active materials were determined to be 82 and 202 mAh/g, respectively. Representative test cells cycled more than 30 times before their discharge capacity had declined to less then 50% of the original. The relatively high first cycle charge inefficiency is thought to be due to irreversible passivation reactions occurring at the carbon surface. Significant performance enhancements may be made by optimization of the electrolyte system and improving the active material mass balance. In summary, low overvoltage, good insertion reversibility, and reasonable capacity retention characterize this fluorophosphate-based sodium-ion cell. © 2002 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Suppression of staging in lithium-intercalated carbon by disorder in the host
Dahn, J. R., Fong, R., & Spoon, M. J. (1990) · Physical Review B · doi:10.1103/physrevb.42.6424 · Cited by 310
Thomas, P., Ghanbaja, J., & Billaud, D. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00276-5 · Cited by 119
Barker, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00090-2 · Cited by 61
Self-citation
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Metadata
- Authors
- Barker, J., Saidi, M. Y., & Swoyer, J. L.
- Venue
- Electrochemical and Solid-State Letters
- Publisher
- The Electrochemical Society
- Published
- 2003
- Volume
- 6
- Issue
- 1
- Pages
- A1
- ISSN
- 1099-0062 (ISSN-L)
- OpenAlex
- W2036671495
- Cited by
- 370
- References
- 6
- FWCI
- 2.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.