The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A Sodium-Ion Cell Based on the Fluorophosphate Compound NaVPO[sub 4]F
Open accessAbstract
Preliminary performance data is presented for a novel sodium-ion cell based on a hard chemistry. To our knowledge this is the first time that a viable sodium-ion system based on a polyanion cathode material has been demonstrated. The was prepared by a simple incorporation reaction involving vanadium(III) phosphate, and NaF. The hard carbon was from a commercial source. Constant current cycling indicated reversible alkali-ion insertion behavior for the fluorophosphate material, while the generally symmetrical nature of the charge/discharge curves indicated the energetic reversibility of the insertion system. The average discharge voltage for the sodium-ion cells was demonstrated to around 3.7 V, a figure comparable with commercially available lithium-ion cells. The reversible specific capacities for the cathode and anode active materials were determined to be 82 and 202 mAh/g, respectively. Representative test cells cycled more than 30 times before their discharge capacity had declined to less then 50% of the original. The relatively high first cycle charge inefficiency is thought to be due to irreversible passivation reactions occurring at the carbon surface. Significant performance enhancements may be made by optimization of the electrolyte system and improving the active material mass balance. In summary, low overvoltage, good insertion reversibility, and reasonable capacity retention characterize this fluorophosphate-based sodium-ion cell. © 2002 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Suppression of staging in lithium-intercalated carbon by disorder in the host
Dahn, J. R., Fong, R., & Spoon, M. J. (1990) · Physical Review B · doi:10.1103/physrevb.42.6424 · Cited by 310
Thomas, P., Ghanbaja, J., & Billaud, D. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00276-5 · Cited by 119
Barker, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00090-2 · Cited by 61
Self-citation
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Polyanion-type cathode materials for sodium-ion batteries
Jin, T., Li, H., Zhu, K., Wang, P.-F., Liu, P., & Jiao, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00846b · Cited by 908
Challenges for Na-ion Negative Electrodes
Chevrier, V. L., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3607983 · Cited by 862
Charge carriers in rechargeable batteries: Na ions vs. Li ions
Hong, S. Y., Kim, Y., Park, Y., Choi, A., Choi, N.-S., & Lee, K. T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40811f · Cited by 830
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
The Current Move of Lithium Ion Batteries Towards the Next Phase
Kim, T., Park, J., Chang, S. K., Choi, S., Ryu, J. H., & Song, H. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200028 · Cited by 742
Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800079 · Cited by 733
Non-aqueous electrolytes for sodium-ion batteries
Ponrouch, A., Monti, D., Boschin, A., Steen, B., Johansson, P., & Palacín, M. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04428b · Cited by 731
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life
Cao, Y., Xiao, L., Wang, W., Choi, D., Nie, Z., Yu, J., Saraf, L. V., Yang, Z., & Liu, J. (2011) · Advanced Materials · doi:10.1002/adma.201100904 · Cited by 708
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries
Xiong, H., Slater, M. D., Balasubramanian, M., Johnson, C. S., & Rajh, T. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012066 · Cited by 673
Electrospun Sb/C Fibers for a Stable and Fast Sodium-Ion Battery Anode
Zhu, Y., Han, X., Xu, Y., Liu, Y., Zheng, S., Xu, K., Hu, L., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn4025674 · Cited by 639
Review—Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries
Irisarri, E., Ponrouch, A., & Palacin, M. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091514jes · Cited by 629
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Vanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
Enabling Sodium Batteries Using Lithium‐Substituted Sodium Layered Transition Metal Oxide Cathodes
Kim, D., Kang, S., Slater, M., Rood, S., Vaughey, J. T., Karan, N., Balasubramanian, M., & Johnson, C. S. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000061 · Cited by 446
An Organic Pigment as a High‐Performance Cathode for Sodium‐Ion Batteries
Luo, W., Allen, M., Raju, V., & Ji, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400554 · Cited by 406
Advances and challenges of sodium ion batteries as post lithium ion batteries
Sawicki, M., & Shaw, L. L. (2015) · RSC Advances · doi:10.1039/c5ra08321d · Cited by 401
Phosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries
Barpanda, P., Ye, T., Nishimura, S.-I., Chung, S.-C., Yamada, Y., Okubo, M., Zhou, H., & Yamada, A. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.08.028 · Cited by 362
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Ellis, B. L., Makahnouk, W. R. M., Rowan-Weetaluktuk, W. N., Ryan, D. H., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902023h · Cited by 341
Wang, T., Su, D., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0009-9 · Cited by 328
A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
Barai, A., Uddin, K., Dubarry, M., Somerville, L., McGordon, A., Jennings, P., & Bloom, I. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.01.001 · Cited by 319
Oh, S.-M., Myung, S.-T., Yoon, C. S., Lu, J., Hassoun, J., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Nano Letters · doi:10.1021/nl500077v · Cited by 314
Topochemical Synthesis of Sodium Metal Phosphate Olivines for Sodium-Ion Batteries
Lee, K. T., Ramesh, T. N., Nan, F., Botton, G., & Nazar, L. F. (2011) · Chemistry of Materials · doi:10.1021/cm200450y · Cited by 309
Guin, M., & Tietz, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.137 · Cited by 301
Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., & Croguennec, L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00361 · Cited by 291
Commercialisation of high energy density sodium-ion batteries: Faradion's journey and outlook
Rudola, A., Rennie, A. J. R., Heap, R., Meysami, S. S., Lowbridge, A., Mazzali, F., Sayers, R., Wright, C. J., & Barker, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00376c · Cited by 289
Self-citationXu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Li, H., Xu, M., Zhang, Z., Lai, Y., & Ma, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000473 · Cited by 260
Micro/Nanostructured Materials for Sodium Ion Batteries and Capacitors
Li, F., & Zhou, Z. (2018) · Small · doi:10.1002/smll.201702961 · Cited by 259
He, J., Tao, T., Yang, F., & Sun, Z. (2022) · ChemSusChem · doi:10.1002/cssc.202200817 · Cited by 30
Han, X., Liu, Z., Hu, X., Huang, Q., Zhang, D., Guo, H., & Yi, Q. (2024) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202300166 · Cited by 22
Metadata
- Authors
- Barker, J., Saidi, M. Y., & Swoyer, J. L.
- Venue
- Electrochemical and Solid-State Letters
- Publisher
- The Electrochemical Society
- Published
- 2003
- Volume
- 6
- Issue
- 1
- Pages
- A1
- ISSN
- 1099-0062 (ISSN-L)
- OpenAlex
- W2036671495
- Cited by
- 370
- References
- 6
- FWCI
- 2.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.