The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Conductivity of PBI Membranes for High-Temperature Polymer Electrolyte Fuel Cells
Abstract
Polybenzimidazole (PBI) film, a candidate polymer electrolyte membrane (PEM) for high-temperature (120-200°C) fuel cells, was cast from PBI / trifluoacetyl / H 3 PO 4 solution with constant molecular weight PBI powder and various acid doping levels. Conductivity measurements on these membranes were performed using an ac method under controlled temperature and relative humidity (RH). A complete set of conductivity data for H 3 PO 4 acid-doped PBI is presented as a function of temperature (60-200°C), RH (5-30%), and acid doping level (300-600 mol %). A mechanism of conductivity is proposed for the proton migration in this PBI/acid system based on this and previous work. Proton transfer in this system appears to occur along different paths for different doping levels, RHs, and temperatures. Hydrogen bonds immobilize the anions and form a network for proton transfer by a Grotthuss mechanism. The rate of proton transfer involving H 2 O is faster, leading to higher conductivity at higher RH. The order of the rate of proton transfer between various species is H 3 PO 4 ( H 2 PO 4 − ) … H O H > H 3 PO 4 … H 2 PO 4 − > N H + … H 2 PO 4 − , N H + … H O H > N H + … N H . The upper limit of proton conductivity is given by the conductivity of the liquid state H 3 PO 4 . © 2003 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers
Rikukawa, M., & Sanui, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00032-0 · Cited by 1,553
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Self-citationDevelopment of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
Proton conduction in acid doped polybenzimidazole
Bouchet, R. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00466-4 · Cited by 501
A fuel cell using acid doped polybenzimidazole as polymer electrolyte
Wang, J.-T., Savinell, R. F., Wainright, J., Litt, M., & Yu, H. (1996) · Electrochimica Acta · doi:10.1016/0013-4686(95)00313-4 · Cited by 474
Self-citationKerres, J., Ullrich, A., Meier, F., & Häring, T. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00181-2 · Cited by 454
Samms, S. R., Wasmus, S., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836621 · Cited by 406
Self-citationQingfeng, L., Hjuler, H. A., & Bjerrum, N. J. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1017558523354 · Cited by 364
Investigation of the conduction properties of phosphoric and sulfuric acid doped polybenzimidazole
Glipa, X., Bonnet, B., Mula, B., Jones, D. J., & Rozière, J. (1999) · Journal of Materials Chemistry · doi:10.1039/a906060j · Cited by 315
A Polymer Electrolyte for Operation at Temperatures up to 200°C
Savinell, R., Yeager, E., Tryk, D., Landau, U., Wainright, J., Weng, D., Lux, K., Litt, M., & Rogers, C. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054875 · Cited by 287
Self-citation
Research works printed but not linked: 24
- H. Moaddel, Ph.D. Thesis, Case Western Reserve University, Cleveland, OH (1996).
- R. Ameri, Ph.D. Thesis, Case Western Reserve University, Cleveland, OH (1997).
- Wang, 1996, J. Appl. Electrochem., 26, 751
- S. Wasmus, B. A. Dauch, H. Moaddel, P. L. Rinaldi, M. H. Litt, C. Rogers, A. Valeriu, G. D. Mateescu, D. A. Tryk, and R. F. Savinell, Abstract 466, p. 716, The Electrochemical Society Extended Abstracts, Vol. 95-1, Reno, NV, May 21-26, 1995.
- J. S. Wainright, M. Litt, and R. F. Savinell, in Handbook of Fuel Cell, Fundamentals, Technology, and Application , Vol. 3, W. Vielstich, A. Lamm and H. A. Gasteiger, Editors, Wiley, New York (2003).
- D. Weng, Ph.D. Thesis, Case Western Reserve University, Cleveland, OH (1996).
- Xing, 1999, J. New Mater. Electrochem. Syst., 2, 95
- Staiti, 2000, J. Power Sources, 90, 231, 10.1016/S0378-7753(00)00401-8 · DOI
- H. Akita, M. Ichikawa, K. Nosaki, H. Oyanagi, and M. Iguchi, U.S. Pat. 6,124,060 (2000).
- J. Kerres, A. Ullrich, and Th. Haring, in Extended Abstracts of the 3rd International Symposium on New Materials for Electrochemical Systems, 231 Montreal, Canada, July 4-8, (1999).
- Kerres, 2000, J. New Mater. Electrochem. Syst., 3, 229
- Kerres, 2002, J. New Mater. Electrochem. Syst., 5, 97
- Roziere, 2001, Solid State Ionics, 145, 61, 10.1016/S0167-2738(01)00914-6 · doi:10.1016/s0167-2738(01)00914-6
- E. W. Choe and D. D. Choe, in Polymeric Materials Encyclopedia , Vol. 7, J. C. Salamone, Editor, p. 5619, CRC Press, Boca Raton, FL (1996).
- MacDonald, 1969, J. Chem. Eng. Data, 14, 380, 10.1021/je60042a013 · doi:10.1021/je60042a013
- Schmalz, 1970, Z. Phys. Chem. (Leipzig), 245, 344
- Greenwood, J. Chem. Soc., 1959, 3485
- Greenwood, J. Chem. Soc., 1959, 3493
- Greenwood, J. Chem. Soc., 1959, 3864
- Munson, 1967, J. Phys. Chem., 71, 10, 3245
- CRC Handbook of Chemistry and Physics , 83rd ed., H. P. R. Frederikse, Editor, LLC, 8-45-54, CRC Press, Boca Raton, FL (2002).
- Jameson, J. Chem. Soc., 1959, 752
- Dickens, 1974, Acta Crystallogr., Sect. B: Struct. Crystallogr. Cryst. Chem., 30, 1470, 10.1107/S0567740874005097 · doi:10.1107/s0567740874005097
- Higgins, 1955, Anal. Chem., 27, 1780, 10.1021/ac60107a030 · doi:10.1021/ac60107a030
Cited by
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
High temperature proton exchange membranes based on polybenzimidazoles for fuel cells
Li, Q., Jensen, J. O., Savinell, R. F., & Bjerrum, N. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.003 · Cited by 1,323
Self-citationProspects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells
Varcoe, J. R., & Slade, R. C. T. (2005) · Fuel Cells · doi:10.1002/fuce.200400045 · Cited by 1,260
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
High temperature (HT) polymer electrolyte membrane fuel cells (PEMFC) – A review
Chandan, A., Hattenberger, M., El-kharouf, A., Du, S., Dhir, A., Self, V., Pollet, B. G., Ingram, A., & Bujalski, W. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.126 · Cited by 926
Haider, R., Wen, Y., Ma, Z.-F., Wilkinson, D. P., Zhang, L., Yuan, X., Song, S., & Zhang, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00296h · Cited by 785
Asensio, J. A., Sánchez, E. M., & Gómez-Romero, P. (2010) · Chemical Society Reviews · doi:10.1039/b922650h · Cited by 746
Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications
Tripathi, B. P., & Shahi, V. K. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.005 · Cited by 576
Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges
Shao, Y., Yin, G., Wang, Z., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.02.065 · Cited by 571
Recent developments in proton exchange membranes for fuel cells
Devanathan, R. (2008) · Energy & Environmental Science · doi:10.1039/b808149m · Cited by 528
Recent progress in fluoropolymers for membranes
Cui, Z., Drioli, E., & Lee, Y. M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.008 · Cited by 499
Nonhumidified Intermediate Temperature Fuel Cells Using Protic Ionic Liquids
Lee, S.-Y., Ogawa, A., Kanno, M., Nakamoto, H., Yasuda, T., & Watanabe, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja102367x · Cited by 465
A comprehensive review of PBI-based high temperature PEM fuel cells
Araya, S. S., Zhou, F., Liso, V., Sahlin, S. L., Vang, J. R., Thomas, S., Gao, X., Jeppesen, C., & Kær, S. K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.024 · Cited by 463
Physicochemical properties of phosphoric acid doped polybenzimidazole membranes for fuel cells
HE, R., LI, Q., BACH, A., JENSEN, J., & BJERRUM, N. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.10.005 · Cited by 372
Qu, E., Hao, X., Xiao, M., Han, D., Huang, S., Huang, Z., Wang, S., & Meng, Y. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231386 · Cited by 363
An operationally flexible fuel cell based on quaternary ammonium-biphosphate ion pairs
Lee, K.-S., Spendelow, J. S., Choe, Y.-K., Fujimoto, C., & Kim, Y. S. (2016) · Nature Energy · doi:10.1038/nenergy.2016.120 · Cited by 347
Blended and cross-linked ionomer membranes for application in membrane fuel cells
Kerres, J. A. (2005) · Fuel Cells · doi:10.1002/fuce.200400079 · Cited by 341
Tang, H., Geng, K., Wu, L., Liu, J., Chen, Z., You, W., Yan, F., Guiver, M. D., & Li, N. (2022) · Nature Energy · doi:10.1038/s41560-021-00956-w · Cited by 335
Xiao, L., Zhang, H., Jana, T., Scanlon, E., Chen, R., Choe, E. ‐., Ramanathan, L. S., Yu, S., & Benicewicz, B. C. (2005) · Fuel Cells · doi:10.1002/fuce.200400067 · Cited by 332
Solid acid membranes for high temperature (¿140° C) proton exchange membrane fuel cells
Hogarth, W. H. J., Diniz da Costa, J. C., & Lu, G. Q. (. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.11.020 · Cited by 288
Asensio, J. A., & Gómez‐Romero, P. (2005) · Fuel Cells · doi:10.1002/fuce.200400081 · Cited by 274
Cross-Linked Polybenzimidazole Membranes for Fuel Cells
Li, Q., Pan, C., Jensen, J. O., Noyé, P., & Bjerrum, N. J. (2007) · Chemistry of Materials · doi:10.1021/cm0627793 · Cited by 263
Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 °C
Zhang, J., Tang, Y., Song, C., & Zhang, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.047 · Cited by 259
Jiang, R., Kunz, H. R., & Fenton, J. M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.180 · Cited by 164
Yang, J., Li, Q., Jensen, J. O., Pan, C., Cleemann, L. N., Bjerrum, N. J., & He, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.038 · Cited by 123
Song, M.-K., Zhu, X., & Liu, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.016 · Cited by 35
Li, W., Norris, B. C., Snodgrass, P., Prasad, K., Stockett, A. S., Pryamitsyn, V., Ganesan, V., Bielawski, C. W., & Manthiram, A. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp904192t · Cited by 15
Metadata
- Authors
- Ma, Y.-L., Wainright, J. S., Litt, M. H., & Savinell, R. F.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 1
- Pages
- A8
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2080123787
- Cited by
- 716
- References
- 32
- FWCI
- 17.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.