The DOI matches its Crossref record.
Chemical Etching of Silicon: IV . Etching Technology
Open accessAbstract
The etching of silicon in based systems proceeds by a sequential oxidation‐followed‐by‐dissolution process. In those composition regions where the solution is very low in and rich in , the rate‐limiting process is the oxidation step. Consequently, electron concentration, surface orientation, crystal defects, and catalysis by lower oxides of nitrogen play an important role. In those compositions where is in limited supply, dissolution of the formed oxide is the rate‐controlling step and diffusion of the complexing fluoride species is the important factor. Therefore, crystal orientation and conductivity type independence as well as hydrodynamic control are the consequences. In order to meaningfully select an etching composition to solve a specific processing problem, it is necessary to understand this composition‐mechanism interaction. Corollary with the mechanism understanding, sample geometry effects have been followed as a function of solution composition. The solution composition plane has been characterized into various regions where the two basic mechanisms interact and specific procesing utilization is shown. Similar results are shown for the system . In addition, a number of particular etching problems are posed, and solutions offered, that make use of these composition characterizations, and show how one can use their information to solve other practical processing problems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Aspnes, D. E., & Studna, A. A. (1983) · Physical Review B · doi:10.1103/physrevb.27.985 · Cited by 4,006
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Etch rates for micromachining processing-part II
Williams, K. R., Gupta, K., & Wasilik, M. (2003) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2003.820936 · Cited by 1,027
Campbell, P. K., Jones, K. E., Huber, R. J., Horch, K. W., & Normann, R. A. (1991) · IEEE Transactions on Biomedical Engineering · doi:10.1109/10.83588 · Cited by 881
Bulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
Etch rates for micromachining processing
Williams, K. R., & Muller, R. S. (1996) · Journal of Microelectromechanical Systems · doi:10.1109/84.546406 · Cited by 646
Black silicon: fabrication methods, properties and solar energy applications
Liu, X., Coxon, P. R., Peters, M., Hoex, B., Cole, J. M., & Fray, D. J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01152j · Cited by 511
Microfabrication in Biology and Medicine
Voldman, J., Gray, M. L., & Schmidt, M. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.401 · Cited by 344
A wafer-scale etching technique for high aspect ratio implantable MEMS structures
Bhandari, R., Negi, S., Rieth, L., & Solzbacher, F. (2010) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2010.06.011 · Cited by 71
Metadata
- Authors
- Schwartz, B., & Robbins, H.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1976-12-01
- Volume
- 123
- Issue
- 12
- Pages
- 1903-1909
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1504539634
- Cited by
- 354
- References
- 0
- FWCI
- 4.25
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.