Cited by 581Fuel Cells and Related MaterialsElectrocatalysts for Energy ConversionAdvancements in Solid Oxide Fuel Cells

The DOI matches its Crossref record.

Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells

Open access

Springer, T. E., Wilson, M. S., Gottesfeld, S.·1993·Journal of The Electrochemical Society

DOI 10.1149/1.2221120

Open this paper in CoChat — free account Open PDF

Abstract

This paper presents a fit between model and experiment for well‐humidified polymer electrolyte fuel cells operated to maximum current density with a range of cathode gas compositions. The model considers, in detail, losses caused by: ( i ) interfacial kinetics at the Pt/ionomer interface, ( ii ) gas‐transport and ionic‐conductivity limitations in the catalyst layer, and ( iii ) gas‐transport limitations in the cathode backing. Our experimental data were collected with cells that utilized thin‐film catalyst layers bonded directly to the membrane, and a separate catalyst‐free hydrophobic backing layer. This structure allows a clearer resolution of the processes taking place in each of these distinguishable parts of the cathode. In our final comparison of model predictions with the experimental data, we stress the simultaneous fit of a family of complete polarization curves obtained for gas compositions ranging from 5 atm to a mixture of 5% in , employing in each case the same model parameters for interfacial kinetics, catalyst‐layer transport, and backing‐layer transport. This approach allowed us to evaluate losses in the cathode backing and in the cathode catalyst layer, and thus identify the improvements required to enhance the performance of air cathodes in polymer electrolyte fuel cells. Finally, we show that effects of graded depletion in oxygen along the gas flow channel can be accurately modeled using a uniform effective oxygen concentration in the flow channel, equal to the average of inlet and exit concentrations. This approach has enabled simplified and accurate consideration of oxygen utilization effects.

Integrity signals

Registry

Crossref · 10.1149/1.2221120

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Still being checked.

Sorted by citations

Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R. L., Meyers, J. P., Pivovar, B. S., Kim, Y. S., Mukundan, R., Garland, N., Myers, D. J., Wilson, M. S., Garzón, F. H., Wood, D. L., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,492
Self-citation
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,441
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Fundamental Models for Fuel Cell Engineering
Wang, C. (2004) · Chemical Reviews · doi:10.1021/cr020718s · Cited by 1,270
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00808-4 · Cited by 1,089
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Development and application of a generalised steady-state electrochemical model for a PEM fuel cell
Mann, R. F., Amphlett, J. C., Hooper, M. A. I., Jensen, H. M., Peppley, B. A., & Roberge, P. R. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00484-x · Cited by 1,035
A review of water flooding issues in the proton exchange membrane fuel cell
Li, H., Tang, Y., Wang, Z., Shi, Z., Wu, S., Song, D., Zhang, J., Fatih, K., Zhang, J. J., Wang, H., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.12.068 · Cited by 1,059
Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells
Wang, Z., Wang, C., & Chen, K. S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00662-5 · Cited by 812
Computational fluid dynamics modeling of proton exchange membrane fuel cells
Um, S., Wang, C. Y., & Chen, K. S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1394090 · Cited by 756
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells
Pasaogullari, U., & Wang, C. Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1646148 · Cited by 634
Visualization of water buildup in the cathode of a transparent PEM fuel cell
Tüber, K., Pócza, D., & Hebling, C. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00797-3 · Cited by 561
Mathematical modeling of proton exchange membrane fuel cells
Rowe, A. M., & Li, X. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00798-4 · Cited by 550
Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells
Pasaogullari, U., & Wang, C. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.04.027 · Cited by 527
A Historical Perspective of Fuel Cell Technology in the 20th Century
Perry, M. L., & Fuller, T. F. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1488651 · Cited by 491
Polymer Electrolyte Fuel Cells
Gottesfeld, S., & Zawodzinski, T. A. (1997) · Advances in electrochemical science and engineering · doi:10.1002/9783527616794.ch4 · Cited by 488
Self-citation
Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers
Wilson, M. S., Valerio, J. A., & Gottesfeld, S. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00272-3 · Cited by 476
Self-citation
A Two-Dimensional, Two-Phase, Multicomponent, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell Using Conventional Gas Distributors
Natarajan, D., & Nguyen, T. V. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1415032 · Cited by 474
Liquid water visualization in PEM fuel cells: A review
Bazylak, A. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.02.084 · Cited by 443
Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells
Paganin, V. A., Ticianelli, E. A., & González, E. R. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00242099 · Cited by 437
Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding
Baschuk, J. J., & Li, X. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00426-7 · Cited by 398
An improved two-dimensional agglomerate cathode model to study the influence of catalyst layer structural parameters
Sun, W., Peppley, B. A., & Karan, K. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2004.12.009 · Cited by 379
Ionic polymer–metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial muscles
Shahinpoor, M., & Kim, K. J. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/6/009 · Cited by 378
Improvement of water management by a microporous sublayer for PEM fuel cells
Qi, Z., & Kaufman, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00058-7 · Cited by 371
Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells
Um, S., & Wang, C. (2003) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.07.007 · Cited by 364
Characterization of gas diffusion layers for PEMFC
Han, M., Xu, J., Chan, S. H., & Jiang, S. P. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.02.057 · Cited by 363
Oxygen and hydrogen permeation properties and water uptake of Nafion® 117 membrane and recast film for PEM fuel cell
BROKA, K., & Ekdunge, P. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018469520562 · Cited by 361
A new dynamic model for predicting transient phenomena in a PEM fuel cell system
Pathapati, P. R., Xue, X., & Tang, J. (2004) · Renewable Energy · doi:10.1016/j.renene.2004.05.001 · Cited by 347
Characterization of Gas Diffusion Layers for PEMFC
Williams, M. V., Begg, E. K., Bonville, L. J., Kunz, H. R., & Fenton, J. M. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1764779 · Cited by 335
Modelling the performance of the cathode catalyst layer of polymer electrolyte fuel cells
Eikerling, M. H., & Kornyshev, A. A. (1998) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(98)00214-9 · Cited by 324
Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells
Siegel, C. (2008) · Energy · doi:10.1016/j.energy.2008.04.015 · Cited by 328
Review on water management methods for proton exchange membrane fuel cells
Wang, X., Ma, Y., Gao, J., Li, M., Jiang, G., & Sun, Z.-Y. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.06.211 · Cited by 321
Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells
Pasaogullari, U., & Wang, C. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850339 · Cited by 310
RETRACTED: Review of proton exchange membrane fuel cell models
Bıyıkoğlu, A. (2005) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2005.05.010 · Cited by 306
Retracted
Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell
Natarajan, D., & Nguyen, T. V. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00624-9 · Cited by 298
Rigorous 3-D Mathematical Modeling of PEM Fuel Cells
Mazumder, S., & Cole, J. V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1615608 · Cited by 298
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. H. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Composition and performance modelling of catalyst layer in a proton exchange membrane fuel cell
Marr, C., & Li, X. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00161-x · Cited by 295
Absorption, Desorption, and Transport of Water in Polymer Electrolyte Membranes for Fuel Cells
Ge, S., Li, X., Yi, B., & Hsing, I.-M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1899263 · Cited by 288
Rigorous 3-D Mathematical Modeling of PEM Fuel Cells
Mazumder, S., & Cole, J. V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1615609 · Cited by 284
Modeling Two-Phase Behavior in PEFCs
Weber, A. Z., Darling, R. M., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1792891 · Cited by 285
Model for Polymer Electrolyte Fuel Cell Operation on Reformate Feed: Effects of CO, H[sub 2] Dilution, and High Fuel Utilization
Springer, T. E., Rockward, T., Zawodzinski, T. A., & Gottesfeld, S. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1344516 · Cited by 284
Self-citation
Electrocatalysis in direct methanol fuel cells: in-situ probing of PtRu anode catalyst surfaces
Dinh, H. N., Ren, X., Garzón, F. H., Zelenay, P., & Gottesfeld, S. (2000) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(00)00271-0 · Cited by 279
Self-citation
Direct methanol fuel cells: progress in cell performance and cathode research
THOMAS, S. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00344-4 · Cited by 278
Investigation of Mass-Transport Limitations in the Solid Polymer Fuel Cell Cathode
Jaouen, F., Lindbergh, G., & Sundholm, G. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1456916 · Cited by 275
Water flow in the gas diffusion layer of PEM fuel cells
Benziger, J. B., Nehlsen, J. P., Blackwell, D., BRENNAN, T., & Itescu, J. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.03.049 · Cited by 279
Ionic Conductivity of PEMFC Electrodes
Li, G., & Pickup, P. G. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1611493 · Cited by 274
Incorporation of voltage degradation into a generalised steady state electrochemical model for a PEM fuel cell
Fowler, M. W., Mann, R. F., Amphlett, J. C., Peppley, B. A., & Roberge, P. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01029-1 · Cited by 268
Electrochemical Impedance Study of PEM Fuel Cells. Experimental Diagnostics and Modeling of Air Cathodes
Ciureanu, M., & Roberge, R. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp003273p · Cited by 258
In Situ High-Resolution Neutron Radiography of Cross-Sectional Liquid Water Profiles in Proton Exchange Membrane Fuel Cells
Hickner, M. A., Siegel, N. P., Chen, K. S., Hussey, D. S., Jacobson, D. L., & Arif, M. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2826287 · Cited by 260
A printed circuit board approach to measuring current distribution in a fuel cell
Cleghorn, S., Derouin, C. R., Wilson, M. S., & Gottesfeld, S. (1998) · Journal of Applied Electrochemistry · doi:10.1023/a:1003206513954 · Cited by 255
Self-citation
Modelling static and dynamic behaviour of proton exchange membrane fuel cells on the basis of electro-chemical description
Ceraolo, M., Miulli, C., & Pozio, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00565-7 · Cited by 246
Modelling the PEM fuel cell cathode
BROKA, K., & EKDUNGE, P. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018476612810 · Cited by 243
Effect of membrane characteristics and humidification conditions on the impedance response of polymer electrolyte fuel cells
Freire, T. J. P., & González, E. R. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(01)00364-3 · Cited by 240
Effect of PTFE content in microporous layer on water management in PEM fuel cells
Park, S., Lee, J., & Popov, B. N. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.11.055 · Cited by 240
Flooding of Gas Diffusion Backing in PEFCs
Ihonen, J. K., Mikkola, M., & Lindbergh, G. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1763138 · Cited by 240
Modeling Liquid Water Effects in the Gas Diffusion and Catalyst Layers of the Cathode of a PEM Fuel Cell
Lin, G., He, W., & Nguyen, T. V. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1808633 · Cited by 229
Analysis for the Effect of Inverter Ripple Current on Fuel Cell Operating Condition
Gemmen, R. (2003) · Journal of Fluids Engineering · doi:10.1115/1.1567307 · Cited by 226
Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells
Bae, J. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00011-5 · Cited by 218
PEM fuel cell model and simulation in Matlab–Simulink based on physical parameters
Abdin, Z., Webb, C. J., & Gray, E. M. (2016) · Energy · doi:10.1016/j.energy.2016.10.033 · Cited by 225
Electrochemical Impedance Spectroscopy of Oxygen Reduction Reaction (ORR) in a Rotating Disk Electrode Configuration: Effect of Ionomer Content and Carbon-Support
Singh, R. K., Devivaraprasad, R., Kar, T., Chakraborty, A. K., & Neergat, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0141506jes · Cited by 215
Investigation of platinum utilization and morphology in catalyst layer of polymer electrolyte fuel cells
Cheng, X., Yi, B., Han, M., Zhang, J., Qiao, Y., & Yu, J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00046-4 · Cited by 210
Self-Organization in Catalyst Layers of Polymer Electrolyte Fuel Cells
Malek, K., Eikerling, M. H., Wang, Q., Navessin, T., & Liu, Z. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp072692k · Cited by 209
A bi-functional micro-porous layer with composite carbon black for PEM fuel cells
Wang, X., Zhang, H., Zhang, J., Xu, H., Zhu, X., Chen, J., & Yi, B. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.064 · Cited by 198
Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance
Yuan, W., Tang, Y. Z., Pan, M., Li, Z., & Tang, B. (2009) · Renewable Energy · doi:10.1016/j.renene.2009.08.017 · Cited by 197
Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation
Tao, W., Min, C. H., Liu, X. L., He, Y. L., Yin, B. H., & Jiang, W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.078 · Cited by 193
Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells
Liu, X., Guo, H., Ye, F., & Ma, C. F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.10.030 · Cited by 188
In Situ Current Distribution Measurements in Polymer Electrolyte Fuel Cells
Mench, M. M., Wang, C. Y., & Ishikawa, M. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1584440 · Cited by 185
An empirical equation for polymer electrolyte fuel cell (PEFC) behaviour
Squadrito, G., Maggio, G., Passalacqua, E., Lufrano, F., & Patti, A. F. (1999) · Journal of Applied Electrochemistry · doi:10.1023/a:1003890219394 · Cited by 184
Magnetic Resonance Imaging of the Water Distribution within a Polymer Electrolyte Membrane in Fuel Cells
Tsushima, S., Teranishi, K., & Hirai, S. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1774971 · Cited by 183
In situ water distribution measurements in a polymer electrolyte fuel cell
Mench, M. M., Dong, Q., & Wang, C. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00617-7 · Cited by 183
Characterisation of proton exchange membrane fuel cell (PEMFC) failures via electrochemical impedance spectroscopy
Mérida, W., Harrington, D. A., Canut, J.-M. L., & McLean, G. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.067 · Cited by 180
Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density
Ahmed, D. H., & Sung, H. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.083 · Cited by 179
A mathematical model for PEMFC in different flow modes
Ge, S.-H., & Yi, B. L. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00584-6 · Cited by 176
Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell
Chu, H., Yeh, C., & Chen, F. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00605-5 · Cited by 178
Understanding underlying processes in formic acid fuel cells
Uhm, S., Lee, H. J., & Lee, J. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b909525j · Cited by 174
Numerical optimization study of the catalyst layer of PEM fuel cell cathode
Song, D., Wang, Q., Liu, Z., Navessin, T., Eikerling, M. H., & Holdcroft, S. (2003) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.08.043 · Cited by 171
Water flooding and two-phase flow in cathode channels of proton exchange membrane fuel cells
Liu, X., Guo, H., & Ma, C. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.06.027 · Cited by 172
Effects of flow channel geometry on cell performance for PEM fuel cells with parallel and interdigitated flow fields
Wang, X., Duan, Y., Yan, W., & Peng, X. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.02.095 · Cited by 170
Intrinsic kinetic equation for oxygenreduction reaction in acidic media: the double Tafel slope and fuelcell applications
Wang, J. X., Uribe, F. A., Springer, T. E., Zhang, J., & Adžić, R. R. (2008) · Faraday Discussions · doi:10.1039/b802218f · Cited by 172
Self-citation
Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer
Sun, W., Peppley, B. A., & Karan, K. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.11.035 · Cited by 169
F UEL C ELLS: Reaching the Era of Clean and Efficient Power Generation in the Twenty-First Century
Srinivasan, S., Mosdale, R., Stevens, P., & Yang, C. (1999) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.24.1.281 · Cited by 168
Functionally Graded Cathode Catalyst Layers for Polymer Electrolyte Fuel Cells
Wang, Q., Eikerling, M. H., Song, D., Liu, Z., Navessin, T., Xie, Z., & Holdcroft, S. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1753580 · Cited by 166
Numerical study on channel size effect for proton exchange membrane fuel cell with serpentine flow field
Wang, X., Yan, W., Duan, Y., Weng, F.-B., Jung, G., & Lee, C. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.11.037 · Cited by 164
Simulation of the Direct Methanol Fuel Cell
Meyers, J. P., & Newman, J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1473189 · Cited by 162
A review on modelling of high temperature proton exchange membrane fuel cells (HT-PEMFCs)
Rasheed, R. K. A., Liao, Q., Caizhi, Z., & Chan, S. H. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.10.078 · Cited by 157
Analysis of Cold Start in Polymer Electrolyte Fuel Cells
Mao, L., & Wang, C. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2402123 · Cited by 156
Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance
Park, S., & Popov, B. N. (2010) · Fuel · doi:10.1016/j.fuel.2010.09.003 · Cited by 154
Mathematical modeling of high-pressure PEM water electrolysis
Grigoriev, S. V., Kalinnikov, A. A., Millet, P., Porembsky, V. I., & Fateev, V. N. (2009) · Journal of Applied Electrochemistry · doi:10.1007/s10800-009-0031-z · Cited by 153
A technical review on gas diffusion, mechanism and medium of PEM fuel cell
Jayakumar, A., Sethu, S. P., Ramos, M., Robertson, J., & Al-Jumaily, A. (2015) · Ionics · doi:10.1007/s11581-014-1322-x · Cited by 148
Optimized Structure of Nanoporous Carbon-Based Double-Layer Capacitors
Eikerling, M., Kornyshev, A. A., & Lust, E. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1825379 · Cited by 147
Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates
Kumar, A., & Reddy, R. G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00540-2 · Cited by 147
Experimental Validation of a PEM Fuel Cell Model by Current Distribution Data
Ju, H., & Wang, C. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1805523 · Cited by 145
Buildup of nitrogen in direct hydrogen polymer-electrolyte fuel cell stacks
Ahluwalia, R. K., & Wang, X. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.01.032 · Cited by 145
PEM fuel cell as a membrane reactor
Thampan, T. M., Malhotra, S., Zhang, J., & Datta, R. (2001) · Catalysis Today · doi:10.1016/s0920-5861(01)00278-4 · Cited by 142
Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems
Abbas, Q., Mirzaeian, M., Hunt, M., Hall, P. J., & Raza, R. (2020) · Energies · doi:10.3390/en13215847 · Cited by 142
Measurements of proton conductivity in the active layer of PEM fuel cell gas diffusion electrodes
Boyer, C. C., Gamburzev, S., Velev, O., Srinivasan, S. G., & Appleby, A. J. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00128-5 · Cited by 137
A model for the liquid feed direct methanol fuel cell
Scott, K., Argyropoulos, P., & Sundmacher, K. (1999) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(99)00359-9 · Cited by 135
Modeling polymer electrolyte fuel cells: an innovative approach
Maggio, G., Recupero, V., & Pino, L. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00758-3 · Cited by 131

Authors: Springer, T. E., Wilson, M. S., & Gottesfeld, S.
Affiliations: Los Alamos National Laboratory (US)
ORCID: Wilson, M. S.
Gottesfeld, S.
Venue: Journal of The Electrochemical Society
Publisher: The Electrochemical Society
Published: 1993-12-01
Volume: 140
Issue: 12
Pages: 3513-3526
ISSN: 0013-4651 (ISSN-L)
1945-7111
DOI: 10.1149/1.2221120
OpenAlex: W2064503430
Cited by: 581
References: 0
Citations by year: 2026: 4 · 2025: 7 · 2024: 8 · 2023: 3 · 2022: 11 · 2021: 10 · 2020: 14 · 2019: 9 · 2018: 9 · 2017: 18 · 2016: 15 · 2015: 6 · 2014: 12 · 2013: 12 · 2012: 19
FWCI: 3.96
Type: journal article
Language: en
Open access: bronze
doi.org
Licence: iopscience.iop.org/page/copyright (vor, 9502 d)
iopscience.iop.org/info/page/text-and-data-mining (tdm, 9502 d)
Locations: Journal of The Electrochemical Society (publishedVersion)
Funders: U.S. Department of Energy
Los Alamos National Laboratory
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords: proton exchange membrane fuel cells, polarization curves, interfacial kinetics, ionic conductivity, oxygen depletion, oxygen utilization, model-experiment comparison, air cathode

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks