The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Diffusion-Induced Stress, Interfacial Charge Transfer, and Criteria for Avoiding Crack Initiation of Electrode Particles
Open accessAbstract
Most lithium-ion battery electrodes experience large volume changes caused by concentration changes within the host particles during charging and discharging. Electrode failure, in the form of fracture or decrepitation, can occur as a result of repeated volume changes. In this work, we first develop analytic solutions for the evolution of concentration and stresses within a spherical electrode element under charging–discharging conditions when the system thermodynamics are ideal (e.g., no repulsion forces are significant between intercalate species). Both interfacial (electrochemical) kinetics and intercalate diffusion are comprehended. Based on the analytic solutions, we propose tensile stress-based criteria for the initiation of cracks within a spherical insertion electrode. These criteria may help guide the development of new materials for lithium-ion batteries with enhanced mechanical durability and identify battery operating conditions that, when maintained, keep the mechanical stresses below acceptable values, thereby increasing cell life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
Cited by
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review
Su, X., Wu, Q., Li, J., Xiao, X., Lott, A., Lu, W., Sheldon, B. W., & Wu, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300882 · Cited by 1,593
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Fracture of crystalline silicon nanopillars during electrochemical lithium insertion
Lee, S. W., McDowell, M. T., Berla, L. A., Nix, W. D., & Cui, Y. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201088109 · Cited by 432
Fracture of electrodes in lithium-ion batteries caused by fast charging
Zhao, K., Pharr, M., Vlassak, J. J., & Suo, Z. (2010) · Journal of Applied Physics · doi:10.1063/1.3492617 · Cited by 428
Metadata
- Authors
- Cheng, Y.-T., & Verbrugge, M. W.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 4
- Pages
- A508
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2038457929
- Cited by
- 220
- References
- 3
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Diffusion-Induced Stress, Interfacial Charge Transfer, and Criteria for Avoiding Crack Initiation of Electrode Particles. https://app.cochat.ai/papers/10.1149/1.3298892
- The paper
- Cheng, Y.-T., & Verbrugge, M. W. (2010). Diffusion-Induced Stress, Interfacial Charge Transfer, and Criteria for Avoiding Crack Initiation of Electrode Particles. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3298892
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.