Modeling Low-Platinum-Loading Effects in Fuel-Cell Catalyst Layers
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The cathode catalyst layer within a proton-exchange-membrane fuel cell is the most complex and critical, yet least understood, layer within the cell. The exact method and equations for modeling this layer are still being revised and will be discussed in this paper, including a 0.8 reaction order, existence of Pt oxide, possible non-isopotential agglomerates, and the impact of a film resistance towards oxygen transport. While the former assumptions are relatively straightforward to understand and implement, the latter film resistance is shown to cause increased mass-transport limitations with low Pt-loading catalyst layers. Model results demonstrate that the increased oxygen flux and/or diffusion pathway through the film can substantially decrease performance. Also, some scale-up concepts from the agglomerate scale to the more macroscopic porous-electrode scale are discussed and the resulting optimization scenarios investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Self-citationTransport in Polymer-Electrolyte Membranes
Weber, A. Z., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1639157 · Cited by 462
Self-citationKhandelwal, M., & Mench, M. M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.092 · Cited by 359
Cited by
A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells
Weber, A. Z., Borup, R. L., Darling, R. M., Das, P. K., Dursch, T. J., Gu, W., Harvey, D., Kusoglu, A., Litster, S., Mench, M. M., et al. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0751412jes · Cited by 598
Self-citationElectrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance
Owejan, J. P., Owejan, J. E., & Gu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.072308jes · Cited by 423
The Impact of Platinum Loading on Oxygen Transport Resistance
Greszler, T. A., Caulk, D., & Sinha, P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.061212jes · Cited by 421
Pore-scale modeling of complex transport phenomena in porous media
Chen, L., He, A., Zhao, J., Kang, Q., Li, Z.-Y., Carmeliet, J., Shikazono, N., & Tao, W.-Q. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100968 · Cited by 399
Metadata
- Authors
- Yoon, W., & Weber, A. Z.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2011
- Volume
- 158
- Issue
- 8
- Pages
- B1007
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2080039209
- Cited by
- 154
- References
- 3
- FWCI
- 7.35
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.