CoChat
Sign Up
Cited by 40Electrocatalysts for Energy ConversionSupercapacitor Materials and FabricationSubcritical and Supercritical Water Processes

Review—Supercritical Deposition: A Powerful Technique for Synthesis of Functional Materials for Electrochemical Energy Conversion and Storage

Open access
Barim, Sansim Bengisu, Uzunlar, Erdal, Bozbag, Selmi Erim, Erkey, Can·2020·Journal of The Electrochemical Society
DOI 10.1149/1945-7111/ab68d1
Open this paper in CoChat — free accountOpen PDF

Abstract

Supercritical fluid-based technologies are increasingly being used to develop novel functional nanostructured materials or improve the properties of existing ones. Among these, supercritical deposition (SCD) is an emerging technique to incorporate metals on supports. It has been used to deposit a wide variety of single or multi-metallic morphologies such as highly dispersed species, nanoparticles, nanorods and conformal films on high surface area supports, polymers and crystalline substrates. SCD is also attracting increasing attention for preparation of micro or nano-architectured functional materials in a highly controllable manner for electrochemical energy conversion and storage systems. Increasing number of studies in the literature demonstrates that materials synthesized using SCD are comparable or superior in performance as compared to their conventional counterparts. In this review, an overview of the fundamentals of the SCD technique is presented. Properties of a wide variety of nanostructured functional materials such as supported nanoparticles and films prepared using SCD for electrochemical applications are summarized. The electrochemical performance of these materials in electrochemical tests and also in fuel cells, electrolyzers and Li-ion batteries are also presented.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/1945-7111/ab68d1

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • SCD in combination with aerogels eliminates the risk of meso- and micropore deformation or collapse during impregnation of the Pt precursor and during depressurization, due to the absence of capillary forces in the supercritical state.

    “SCD can be considered a particularly attractive technique in combination with aerogels, since the risk of meso- and micropore deformation or collapse during the impregnation of Pt precursor and during the depressurization is eliminated due to the absence of capillary forces in the supercritical state.[55–59]”

    From Synthesis of Pt Carbon Aerogel Electrocatalysts with Multiscale Porosity Derived from Cellulose and Chitosan Biopolymer Aerogels via Supercritical Deposition for Hydrogen Evolution Reaction (2025) · cites this paper as [55]

    The review describes Pt-precursor adsorption onto carbon aerogels by SCD (Functional Materials for Electrochemical Applications Using Supercritical Deposition; page unavailable). It also says supercritical fluids have zero surface tension and that avoiding a phase change during depressurization enables aerogel products (Li-ion battery applications and Abstract; pages unavailable). It does not state that these properties eliminate meso- or micropore deformation or collapse during Pt impregnation and depressurization. (LLM, conf=0.84)

    Experimental — accuracy not yet measured

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Cites

Flagged first, then by citations

Research works printed but not linked: 101

  1. S. E. Bozbag and C. Erkey, J. Supercrit. Fluids, 96, 298 (2015). · DOI
  2. S. E. Bozbag, D. Sanli, and C. Erkey, J. Mater. Sci., 47, 3469 (2012). · DOI
  3. S. E. Bozbag and C. Erkey, J. Supercrit. Fluids, 62, 1 (2012). · DOI
  4. D. Sanli, S. E. Bozbag, and C. Erkey, J. Mater. Sci., 47, 2995 (2012). · DOI
  5. C. Erkey, in Supercritical Fluids & Organometallic Compounds (Elsevier, Amsterdam) (2011).
  6. C. Erkey, J. Supercrit. Fluids, 47, 517 (2009). · DOI
  7. Y. Zhang and C. Erkey, J. Supercrit. Fluids, 38, 252 (2006). · DOI
  8. S. E. Bozbag and C. Erkey, J. Supercrit. Fluids, 62, 1 (2012). · DOI
  9. A. H. Romang and J. J. Watkins, Chem. Rev., 110, 459 (2010). · DOI
  10. D. Hu, H. Xu, Z. X. Yi, Z. Chen, C. L. Ye, Z. T. Wu, H. F. Garces, and K. Yan, ACS Sustain. Chem. Eng., 7, 15339 (2019). · DOI
  11. P. G. Corradini, F. I. Pires, V. A. Paganin, J. Perez, and E. Antolini, J. Nanopart. Res., 14, 9 (2012). · DOI
  12. D. V. Pugh, A. Dursun, and S. G. Corcoran, J. Electrochem. Soc., 152, B455 (2005). · DOI
  13. Y. Y. Huang, T. S. Zhao, L. Zeng, P. Tan, and J. B. Xu, Electrochim. Acta, 190, 956 (2016). · DOI
  14. S. B. Barim, S. E. Bozbag, H. B. Yu, R. Kizilel, M. Aindow, and C. Erkey, Catal. Today, 310, 166 (2018). · DOI
  15. K. S. Morley, P. Licence, P. C. Marr, J. R. Hyde, P. D. Brown, R. Mokaya, Y. Xia, and S. M. Howdle, J. Mater. Chem., 14, 1212 (2004). · DOI
  16. P. Kolla and A. Smirnova, Electrochim. Acta, 182, 20 (2015). Figure · DOI
  17. J. J. Watkins and T. J. McCarthy, Chem. Mater., 7, 1991 (1995). · DOI
  18. O. Aschenbrenner, S. Kemper, N. Dahmen, K. Schaber, and E. Dinjus, J. Supercrit. Fluids, 41, 179 (2007). · DOI
  19. J. A. Darr and M. Poliakoff, Chem. Rev., 99, 495 (1999). · DOI
  20. C. Erkey, J. Supercrit. Fluids, 17, 259 (2000). · DOI
  21. N. G. Smart, T. Carleson, T. Kast, A. A. Clifford, M. D. Burford, and C. M. Wai, Talanta, 44, 137 (1997). · DOI
  22. M. Skerget, Z. Knez, and M. Knez-Hrncic, J. Chem. Eng. Data, 56, 694 (2011). · DOI
  23. S. G. Kazarian, M. F. Vincent, F. V. Bright, C. L. Liotta, and C. A. Eckert, JACS, 118, 1729 (1996). · DOI
  24. T. Casimiro, F. Montilla, S. Garcia, T. Avilés, S. Raeissi, A. Shariati, C. J. Peters, M. Nunes da Ponte, and A. Aguiar-Ricardo, J. Supercrit. Fluids, 31, 1 (2004). · DOI
  25. D. Liu and D. L. Tomasko, J. Supercrit. Fluids, 39, 416 (2007). · DOI
  26. J. Chrastil, J. Phys. Chem., 86, 3016 (1982). · DOI
  27. A. Niu, Y. J. Han, J. A. Wu, N. Yu, and Q. Xu, J. Phys. Chem. C, 114, 12728 (2010). · DOI
  28. J. Z. Yin, Q. Q. Xu, and A. Q. Wang, Chem. Eng. Commun., 197, 627 (2010). · DOI
  29. M. Alibouri, S. M. Ghoreishi, and H. R. Aghabozorg, AlChE J., 55, 2665 (2009). · DOI
  30. C. Aymonier, A. Denis, Y. Roig, M. Iturbe, E. Sellier, S. Marre, F. Cansell, and J. L. Bobet, J. Supercrit. Fluids, 53, 102 (2010). · DOI
  31. H. Wakayama and Y. Fukushima, J. Chem. Eng. Jpn., 42, 134 (2009). · DOI
  32. Z. M. Chen, M. C. Zhuo, F. F. Xue, J. F. Chen, and Q. Xu, Ind. Eng. Chem. Res., 48, 3441 (2009). · DOI
  33. S. R. Puniredd, C. M. Yin, Y. S. Hoo, P. S. Lee, and M. P. Srinivasan, J. Colloid Interface Sci., 332, 505 (2009). · DOI
  34. S. R. Puniredd, B. C. C. Nguan, and M. P. Srinivasan, J. Colloid Interface Sci., 333, 679 (2009). · DOI
  35. G. Aksomaityte, F. Cheng, A. L. Hector, J. R. Hyde, W. Levason, G. Reid, D. C. Smith, J. W. Wilson, and W. Zhang, Chem. Mater., 22, 4246 (2010). · DOI
  36. B. I. Lee, D. Bae, J. K. Kang, H. Kim, and S. H. Byeon, Bull. Korean Chem. Soc., 30, 1701 (2009). · DOI
  37. G. I. Garrido and F. C. Patcas, A, G. Upper, M. Türk, S. Yilmaz, and B. Kraushaar-Czarnetzki, Appl. Catal., A, 338, 58 (2008). · DOI
  38. S. Lang, M. Türk, and B. Kraushaar-Czarnetzki, J. Catal., 286, 78 (2012). · DOI
  39. B. Cangul, L. C. Zhang, M. Aindow, and C. Erkey, J. Supercrit. Fluids, 50, 82 (2009). · DOI
  40. S. E. Bozbag, N. S. Yasar, L. C. Zhang, M. Aindow, and C. Erkey, J. Supercrit. Fluids, 56, 105 (2011). · DOI
  41. C. D. Saquing, T. T. Cheng, M. Aindow, and C. Erkey, J. Phys. Chem. B, 108, 7716 (2004). · DOI
  42. C. D. Saquing, D. Kang, M. Aindow, and C. Erkey, Microporous Mesoporous Mater., 80, 11 (2005). · DOI
  43. Y. Zhang, B. Cangul, Y. Garrabos, and C. Erkey, J. Supercrit. Fluids, 44, 71 (2008). · DOI
  44. G. Caputo, I. De Marco, and E. Reverchon, J. Supercrit. Fluids, 54, 243 (2010). · DOI
  45. G. Brunner and M. Johannsen, J. Supercrit. Fluids, 38, 181 (2006). · DOI
  46. I. Ushiki, N. Takahashi, M. Koike, Y. Sato, S. Takishima, and H. Inomata, J. Supercrit. Fluids, 135, 137 (2018). · DOI
  47. J. Wang, T. Yu, X. Q. Wang, G. S. Qi, J. J. Xue, M. Q. Shen, and W. Li, Appl. Catal. B-Environ., 127, 137 (2012). · DOI
  48. F. E. S. Oztuna, S. B. Barim, S. E. Bozbag, H. B. Yu, M. Aindow, U. Unal, and C. Erkey, Electrochim. Acta, 250, 174 (2017). · DOI · Paper page
  49. Y. Z. Zhou, C. H. Yen, Y. H. Hu, C. M. Wang, X. N. Cheng, C. M. Wai, J. Yang, and Y. H. Lin, J. Mater. Chem. A, 4, 18628 (2016). · DOI
  50. V. N. Bagratashvili, A. O. Rybaltovsky, N. V. Minaev, P. S. Timashev, V. V. Firsov, and V. I. Yusupov, Laser Phys. Lett., 7, 401 (2010). · DOI
  51. V. Aggarwal, L. F. Reichenbach, M. Enders, T. Muller, S. Wolff, M. Crone, M. Türk, and S. Bräse, Chem.-Eur. J., 19, 12794 (2013). · DOI
  52. S. Wolff, M. Crone, T. Muller, M. Enders, S. Bräse, and M. Türk, J. Supercrit. Fluids, 95, 588 (2014). · DOI
  53. C. H. Yen, K. Shimizu, Y. Y. Lin, F. Bailey, I. F. Cheng, and C. M. Wai, Energy & Fuels, 21, 2268 (2007). · DOI
  54. A. Bayrakceken, B. Cangul, L. C. Zhang, M. Aindow, and C. Erkey, Int. J. Hydrogen Energy, 35, 11669 (2010). · DOI
  55. S. E. Bozbag, U. Unal, M. A. Kurykin, C. J. Ayala, M. Aindow, and C. Erkey, J. Phys. Chem. C, 117, 6777 (2013). · DOI
  56. C. F. Karanikas and J. J. Watkins, Microelectron. Eng., 87, 566 (2010). · DOI
  57. J. M. Blackburn, D. P. Long, A. Cabanas, and J. J. Watkins, Science, 294, 141 (2001). · DOI
  58. E. Kondoh and J. Fukuda, J. Supercrit. Fluids, 44, 466 (2008). · DOI
  59. E. T. Hunde and J. J. Watkins, Chem. Mater., 16, 498 (2004). · DOI
  60. F. J. Maldonado-Hodar, M. A. Ferro-Garcia, J. Rivera-Utrilla, and C. Moreno- Castilla, Carbon, 37, 1199 (1999). · DOI
  61. E. Bekyarova and K. Kaneko, Adv. Mater., 12, 1625 (2000). · DOI
  62. S. Martinez, A. Vallribera, C. L. Cotet, M. Popovici, L. Martin, A. Roig, M. Moreno-Manas, and E. Molins, New J. Chem., 29, 1342 (2005). · DOI
  63. T. F. Baumann, G. A. Fox, J. H. Satcher, N. Yoshizawa, R. W. Fu, and M. S. Dresselhaus, Langmuir, 18, 7073 (2002). · DOI
  64. J. M. Miller, B. Dunn, T. D. Tran, and R. W. Pekala, J. Electrochem. Soc., 144, L309 (1997). · DOI
  65. J. H. Jang, S. Han, T. Hyeon, and S. M. Oh, J. Power Sources, 123, 79 (2003). · DOI
  66. M. B. Dawidziuk, F. Carrasco-Marin, and C. Moreno-Castilla, Carbon, 47, 2679 (2009). · DOI
  67. Y. H. Lin, X. L. Cui, C. Yen, and C. M. Wai, J. Phys. Chem. B, 109, 14410 (2005). · DOI
  68. G. I. Garrido, F. C. Patcas, G. Upper, M. Tuerk, S. Yilmaz, and B. Kraushaar- Czarnezki, Appl. Catal. A-Gen., 338, 58 (2008). · DOI
  69. S. G. Aspromonte, A. Sastre, A. V. Boix, M. J. Cocero, and E. Alonso, Microporous Mesoporous Mater., 148, 53 (2012). · DOI
  70. J. Morere, S. Royuela, G. Asensio, P. Palomino, E. Enciso, C. Pando, and A. Cabanas, Phil. Trans. R. Soc. A-Math. Phys. Eng. Sci., 373, 16 (2015). · DOI
  71. J. S. Wang, C. M. Wai, G. J. Brown, and S. D. Apt, Langmuir, 32, 4635 (2016). · DOI
  72. S. Wolff, M. Crone, T. Muller, M. Enders, S. Bräse, and M. Türk, J. Supercrit. Fluids, 95, 588 (2014). · DOI
  73. Y. Zhang, D. F. Kang, C. Saquing, M. Aindow, and C. Erkey, Ind. Eng. Chem. Res., 44, 4161 (2005). · DOI
  74. X. R. Ye, Y. H. Lin, and C. M. Wai, Chem. Commun., 642 (2003). · DOI
  75. X. R. Ye, Y. H. Lin, C. M. Wang, M. H. Engelhard, Y. Wang, and C. M. Wai, J. Mater. Chem., 14, 908 (2004). · DOI
  76. Y. H. Lin, X. L. Cui, and X. R. Ye, Electrochem. Commun., 7, 267 (2005). · DOI
  77. G. Girishkumar, K. Vinodgopal, and P. V. Kamat, J. Phys. Chem. B, 108, 19960 (2004). · DOI
  78. J. Zhao, L. Q. Zhang, T. Chen, H. Yu, L. Zhang, H. Xue, and H. Q. Hu, J. Phys. Chem. C, 116, 21374 (2012). · DOI
  79. J. Zhao, Z. S. Liu, H. Q. Li, W. B. Hu, C. Z. Zhao, P. Zhao, and D. L. Shi, Langmuir, 31, 2576 (2015). · DOI
  80. J. Zhao, H. Yu, Z. S. Liu, M. Ji, L. Q. Zhang, and G. W. Sun, J. Phys. Chem. C, 118, 1182 (2014). · DOI
  81. B. Seger and P. V. Kamat, J. Phys. Chem. C, 113, 7990 (2009). · DOI
  82. C. Xu, X. Wang, and J. W. Zhu, J. Phys. Chem. C, 112, 19841 (2008). · DOI
  83. E. E. Said-Galiyev, A. Y. Nikolaev, E. E. Levin, E. K. Lavrentyeva, M. O. Gallyamov, S. N. Polyakov, G. A. Tsirlina, O. A. Petrii, and A. R. Khokhlov, J. Solid State Electrochem., 15, 623 (2011). · DOI
  84. A. D. Taylor, R. C. Sekol, J. M. Kizuka, S. D'Cunha, and C. M. Comisar, J. Catal., 259, 5 (2008). · DOI
  85. K. Shimizu, I. F. Cheng, J. S. Wang, C. H. Yen, B. Yoon, and C. M. Wai, Energy & Fuels, 22, 2543 (2008). · DOI
  86. A. Bayrakceken, A. Smirnova, U. Kitkamthorn, M. Aindow, L. Turker, I. Eroglu, and C. Erkey, J. Power Sources, 179, 532 (2008). · DOI · Paper page
  87. A. Bayrakceken, A. Smirnova, U. Kitkamthorn, M. Aindow, L. Turker, I. Eroglu, and C. Erkey, Chem. Eng. Commun., 196, 194 (2009). · DOI · Paper page
  88. S. E. Bozbag, T. Gumusoglu, S. Yilmazturk, C. J. Ayala, M. Aindow, H. Deligoz, and C. Erkey, J. Supercrit. Fluids, 97, 154 (2015). · DOI
  89. S. B. Barim, A. Bayrakceken, S. E. Bozbag, L. C. Zhang, R. Kizilel, M. Aindow, and C. Erkey, Microporous Mesoporous Mater., 245, 94 (2017). · DOI
  90. H. A. Gasteiger, S. S. Kocha, B. Sompalli, and F. T. Wagner, Appl. Catal. B- Environ., 56, 9 (2005). · DOI · Paper page
  91. E. Antolini, Appl. Catal. B-Environ., 88, 1 (2009). · DOI · Paper page
  92. J. Marie, S. Berthon-Fabry, M. Chatenet, E. Chainet, R. Pirard, N. Cornet, and P. Achard, J. Appl. Electrochem., 37, 147 (2007). · DOI
  93. A. Smirnova, X. Dong, H. Hara, A. Vasiliev, and N. Sammes, Int. J. Hydrogen Energy, 30, 149 (2005). · DOI
  94. N. Job, F. Maillard, J. Marie, S. Berthon-Fabry, J. P. Pirard, and M. Chatenet, J. Mater. Sci., 44, 6591 (2009). · DOI
  95. V. Bock, A. Emmerling, and J. Fricke, J. Non-Cryst. Solids, 225, 69 (1998). · DOI
  96. F. J. Maldonado-Hodar, C. Moreno-Castilla, J. Rivera-Utrilla, Y. Hanzawa, and Y. Yamada, Langmuir, 16, 4367 (2000). 100. K. Cheng, D. P. He, T. Peng, H. F. Lv, M. Pan, and S. C. Mu, Electrochim. Acta, 132, 356 (2014). 101. · DOI
  97. Q. H. Huang, F. F. Tao, L. L. Zou, T. Yuan, Z. Q. Zou, H. F. Zhang, X. G. Zhang, and H. Yang, Electrochim. Acta, 152, 140 (2015). 102. N. M. Markovic, H. A. Gasteiger, and P. N. Ross, J. Phys. Chem., 99, 3411 (1995). 103. S. Y. Ang and D. A. Walsh, J. Power Sources, 195, 2557 (2010). 104. L. Quan, X. L. Yu, T. Wang, W. C. Yin, J. Q. Liu, L. Wang, and Y. H. Zhang, Appl. Surf. Sci., 494, 691 (2019). 105. Y. Y. Liang, H. L. Wang, J. G. Zhou, Y. G. Li, J. Wang, T. Regier, and H. J. Dai, JACS, 134, 3517 (2012). 106. P. Q. Yin et al., Angew. Chem. Int. Ed., 55, 10800 (2016). 107. W. J. Jiang, L. Gu, L. Li, Y. Zhang, X. Zhang, L. J. Zhang, J. Q. Wang, J. S. Hu, Z. D. Wei, and L. J. Wan, JACS, 138, 3570 (2016). 108. H. L. Peng, Z. Y. Mo, S. J. Liao, H. G. Liang, L. J. Yang, F. Luo, H. Y. Song, Y. L. Zhong, and B. Q. Zhang, Sci. Rep., 3, 7 (2013). 109. C. L. Lai, P. Kolla, Y. Zhao, H. Fong, and A. L. Smirnova, Electrochim. Acta, 130, 431 (2014). 110. S. Unsal, M. B. Yagci, S. E. Bozbag, B. Deljoo, M. Aindow, and C. Erkey, Energy Technol., 7, 1900450 (2019). 111. Z. Chen, J. F. Lu, Y. J. Ai, Y. F. Ji, T. Adschiri, and L. J. Wan, ACS Appl. Mater. Interfaces, 8, 35132 (2016). 112. P. Thangasamy, A. Ramesh, and M. Sathish, ChemistrySelect, 2, 5978 (2017). 113. X. X. Lin, A. J. Wang, K. M. Fang, J. H. Yuan, and J. J. Feng, ACS Sustain. Chem. Eng., 5, 8675 (2017). 114. H. F. Lv et al., JACS, 137, 5859 (2015). 115. Y. Shi, J. Wang, C. Wang, T. T. Zhai, W. J. Bao, J. J. Xu, X. H. Xia, and H. Y. Chen, JACS, 137, 7365 (2015). 116. G. D. Li and Z. Y. Tang, Nanoscale, 6, 3995 (2014). 117. T. R. Karl and K. E. Trenberth, Science, 302, 1719 (2003). 118. R. a. D. A. Ussiri, in Carbon Sequestration for Climate Change Mitigation and Adaptation (Springer, Cham, Switzerland) (2017). 119. · DOI
  98. M. De Falco, M. Capocelli, and G. Centi, Chem. Eng. J., 294, 400 (2016). 120. G. L. Zhou, H. R. Liu, K. K. Cui, A. P. Jia, G. S. Hu, Z. J. Jiao, Y. Q. Liu, and X. M. Zhang, Appl. Surf. Sci., 383, 248 (2016). 121. H. Muroyama, Y. Tsuda, T. Asakoshi, H. Masitah, T. Okanishi, T. Matsui, and K. Eguchi, J. Catal., 343, 178 (2016). 122. C. Fukuhara, K. Hayakawa, Y. Suzuki, W. Kawasaki, and R. Watanabe, Appl. Catal. A-Gen., 532, 12 (2017). 123. C. Genovese, C. Ampelli, S. Perathoner, and G. Centi, J. Catal., 308, 237 (2013). 124. C. Ampelli, C. Genovese, M. Errahali, G. Gatti, L. Marchese, S. Perathoner, and G. Centi, J. Appl. Electrochem., 45, 701 (2015). 125. A. Del Castillo, M. Alvarez-Guerra, and A. Irabien, AIChE J., 60, 3557 (2014). 126. · DOI
  99. Q. N. Wang, H. Dong, and H. B. Yu, J. Power Sources, 271, 278 (2014). 127. H. R. Jhong, F. R. Brushett, and P. J. A. Kenis, Adv. Energy Mater., 3, 589 (2013). 128. J. Medina-Ramos, R. C. Pupillo, T. P. Keane, J. L. DiMeglio, and J. Rosenthal, J. Am. Chem. Soc., 137, 5021 (2015). 129. Z. Bitar, A. Fecant, E. Trela-Baudot, S. Chardon-Noblat, and D. Pasquier, Appl. Catal. B-Environ., 189, 172 (2016). 130. J. L. Yu, H. Y. Liu, S. Q. Song, Y. Wang, and P. Tsiakaras, Appl. Catal. A-Gen., 545, 159 (2017). 131. M. T. Mehran, S. B. Yu, D. Y. Lee, J. E. Hong, S. B. Lee, S. J. Park, R. H. Song, and T. H. Lim, Appl. Energy, 212, 759 (2018). 132. C. Jimenez, J. Garcia, R. Camarillo, F. Martinez, and J. Rincon, Energy & Fuels, 31, 3038 (2017). 133. J. Garcia, C. Jimenez, F. Martinez, R. Camarillo, and J. Rincon, J. Catal., 367, 72 (2018). 134. M. Le, M. Ren, Z. Zhang, P. T. Sprunger, R. L. Kurtz, and J. C. Flake, J. Electrochem. Soc., 158, E45 (2011). 135. J. Albo and A. Irabien, J. Catal., 343, 232 (2016). 136. R. Passalacqua, S. Parathoner, G. Centi, A. Halder, E. C. Tyo, B. Yang, S. Seifert, and S. Vajda, Catal. Sci. Technol., 6, 6977 (2016). 137. S. T. Ahn, I. Abu-Baker, and G. T. R. Palmore, Catal. Today, 288, 24 (2017). 138. S. E. Bozbag, S. O. Kostenko, M. A. Kurykin, V. N. Khrustalev, A. R. Khokhlov, L. Zhang, M. Aindow, and C. Erkey, J. Nanopart. Res., 14, 973 (2012). 139. L. Y. Wang, L. H. Zhuo, C. Zhang, and F. Y. Zhao, Chem.-Eur. J., 20, 4308 (2014). 140. J. P. Bosco, M. P. Humbert, and J. G. Chen, in Design of Heterogeneous Catalysts New Approaches based on Synthesis, Characterization and Modeling, ed. U. S. Ozkan (Wiley-VCH, Weinheim) p. 195 (2009). 141. J. R. Kitchin, J. K. Nørskov, M. A. Barteau, and J. G. Chen, Phys. Rev. Lett., 93, 156801 (2004). 142. A. Winkler, D. Ferri, and R. Hauert, Catal. Today, 155, 140 (2010). 143. M. H. Wiebenga, C. H. Kim, S. J. Schmieg, S. H. Oh, D. B. Brown, D. H. Kim, J.- H. Lee, and C. H. F. Peden, Catal. Today, 184, 197 (2012). 144. S. Koh and P. Strasser, JACS, 129, 12624 (2007). 145. J. Greeley and J. K. Nørskov, Surf. Sci., 592, 104 (2005). 146. · DOI
  100. V. R. Stamenkovic, B. Fowler, B. S. Mun, G. Wang, P. N. Ross, C. A. Lucas, and N. M. Marković, Science, 315, 493 (2007). 147. P. Mani, R. Srivastava, and P. Strasser, J. Phys. Chem. C, 112, 2770 (2008). 148. Y. Lin, X. C. H. Yen, and C. M. Wai, Langmuir, 21, 11474 (2005). 149. M. Watanabe, Y. M. Zhu, H. Igarashi, and H. Uchida, Electrochem. Commun., 68, 244 (2000). 150. C. H. Yen, K. Shimizu, Y.-Y. Lin, F. Bailey, I. F. Cheng, and C. M. Wai, Energy & Fuels, 21, 2268 (2007). 151. G. An, P. Yu, L. Mao, Z. Sun, Z. Liu, S. Miao, Z. Miao, and K. Ding, Carbon, 45, 536 (2007). 152. A. Bayrakceken, B. Cangül, L. C. Zhang, M. Aindow, and C. Erkey, Int. J. Hydrogen Energy, 35, 11669 (2010). 153. S. B. Barim, S. E. Bozbag, H. Yu, R. Kızılel, M. Aindow, and C. Erkey, Catal. Today, 310, 166 (2018). 154. S. Koh, N. Hahn, C. F. Yu, and P. Strasser, J. Electrochem. Soc., 155, B1281 (2008). 155. M. Oezaslan, F. Hasche, and P. Strasser, J. Electrochem. Soc., 159, B444 (2012). 156. S. B. Barim, S. E. Bozbag, B. Deljoo, M. Aindow, and C. Erkey, Fuel Cells (2020), at press. 157. Y. Z. Zhou, X. N. Cheng, C. H. Yen, C. M. Wai, C. M. Wang, J. Yang, and Y. H. Lin, J. Power Sources, 347, 69 (2017). 158. E. Reverchon and R. Adami, J. Supercrit. Fluids, 37, 1 (2006). 159. J. J. Watkins and T. J. McCarthy, Chem. Mater., 7, 1991 (1995). 160. A. R. Berens and G. S. Huvard, in Supercritical Fluid Science and Technology (American Chemical Society, Washington, DC) 406, p. 207 (1989). 161. D. L. Tomasko, H. Li, D. Liu, X. Han, M. J. Wingert, L. J. Lee, and K. W. Koelling, Ind. Eng. Chem. Res., 42, 6431 (2003). 162. E. J. Beckman, J. Supercrit. Fluids, 28, 121 (2004). 163. S. G. Kazarian, N. H. Brantley, B. L. West, M. F. Vincent, and C. A. Eckert, Appl. Spectrosc., 51, 491 (1997). 164. J. von Schnitzler and R. Eggers, J. Supercrit. Fluids, 16, 81 (1999). 165. M. Ge, S. E. Bozbag, C. J. Ayala, M. Aindow, and C. Erkey, Mater. Chem. Phys., 180, 1 (2016). 166. R. C. Jiang, Y. Zhang, S. Swier, X. Z. Wei, C. Erkey, H. R. Kunz, and J. M. Fenton, Electrochem. Solid State Lett., 8, A611 (2005). 167. Y. Zhang and C. Erkey, Ind. Eng. Chem. Res., 44, 5312 (2005). 168. D. Kim, J. Sauk, J. Byun, K. S. Lee, and H. Kim, Solid State Ionics, 178, 865 (2007). 169. J. J. Watkins, J. M. Blackburn, and T. J. McCarthy, Chem. Mater., 11, 213 (1999). 170. J. M. Blackburn, D. P. Long, and J. J. Watkins, Chem. Mater., 12, 2625 (2000). 171. M. Majimel, S. Marre, E. Garrido, and C. Aymonier, Chem. Vap. Deposition, 17, 342 (2011). 172. O. Pascu, S. Marre, and C. Aymonier, Nanotechnol. Rev., 4, 487 (2015). 173. A. H. Romang and J. J. Watkins, Chem. Rev., 110, 459 (2010). 174. A. O'Neil and J. J. Watkins, MRS Bull., 30, 967 (2005). 175. J. M. Bassat, D. Mesguich, C. Ferchaud, Y. Zhang-Steenwinkel, F. van Berkel, C. Aymonier, J. J. Watkins, and J. C. Grenier, ECS Trans., 35, 1945 (2011). 176. D. Mesguich, C. Aymonier, J. M. Bassat, F. Mauvy, E. You, and J. J. Watkins, Chem. Mater., 23, 5323 (2011). 177. Q. Le Trequesser, D. Mesguich, E. You, C. Aymonier, and J. J. Watkins, J. Supercrit. Fluids, 66, 328 (2012). 178. · DOI
  101. Q. H. Do, C. C. Zeng, C. Zhang, B. Wang, and J. Zheng, Nanotechnology, 22, 365402 (2011). 179. Q. H. Do and C. C. Zeng, Ind. Eng. Chem. Res., 57, 6863 (2018). · DOI

Cited by

Sorted by citations

Authors
Barim, S. B., Uzunlar, E., Bozbag, S. E., & Erkey, C.
Affiliations
  • Izmir Institute of Technology (TR)
  • Koç University (TR)
Corresponding author
Erkey, Can
ORCID
Venue
Journal of The Electrochemical Society
Publisher
The Electrochemical Society
Published
2020-01-22
Volume
167
Issue
5
Pages
054510
ISSN
  • 0013-4651 (ISSN-L)
  • 1945-7111
DOI
10.1149/1945-7111/ab68d1
OpenAlex
W3001130977
Cited by
40
References
3
Citations by year
2026: 4 · 2025: 7 · 2024: 7 · 2023: 5 · 2022: 8 · 2021: 3 · 2020: 6
FWCI
1.09
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of The Electrochemical Society (publishedVersion, cc-by)
  • Digital Collections portal (Koç University) (submittedVersion)
  • IYTE GCRIS Database (Izmir Institute of Technology) (submittedVersion, other-oa)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
  • Physical Sciences › Engineering › Biomedical Engineering › Subcritical and Supercritical Water Processes
Keywords
supercritical fluid synthesis, supported nanoparticles, nanorods, conformal films, nanostructured materials, metal-support interaction, electrochemical energy conversion, electrochemical energy storage, fuel cells, electrolyzer, lithium-ion batteries, high surface area supports

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review