CoChat

Performance of Commercial Li-Ion Cells for Future NASA Missions and Aerospace Applications

Open access
Krause, F. C., Ruiz, J. P., Jones, S. C., Brandon, E. J., Darcy, E. C., Iannello, C. J., Bugga, R. V. · 2021 · Journal of The Electrochemical Society

The DOI matches its Crossref record; 40 of the 41 references it cites were found in a registry or an index.

Abstract

Li-ion batteries are being widely used in planetary missions, based on their impressive performance characteristics, including high specific energy, long life, and the ability to operate over a wide temperature range. Custom large-format Li-ion cells were used in the early planetary missions, e.g., Mars Rovers, Mars Landers, and Mars and Jupiter Orbiters. At the same time, several other robotic missions have utilized and are planning to utilize commercial 18650 lithium-ion cells, e.g., Mars Express, Lunar Reconnaissance Orbiter, Europa Clipper, as well as human-rated astronaut Extra-Vehicular Activities. Interest in commercial 18650 lithium-ion cells for NASA missions has increased in recent years due to distinct advantages over custom large-format cells, including higher specific energy and energy density, enhanced safety and reliability, modularity and redundancy in the battery design, and simpler charge methodology. Multiple commercial 18650 cells are available which can provide a specific energy of ∼250 Wh∙kg−1(20%–50% over custom cells) and a power density of ∼2 kW∙kg−1. Selected cell types with different chemistries and from multiple high-quality manufacturers, including the MJ1, M36, HG2 models from LG Chem; the 35E, 36 G and 30Q models from Samsung; the BJ and GA models from Sanyo/Panasonic; and the VC7 from Sony/Murata, were evaluated for their applicability in space applications. The performance tests included cycle life at different temperatures and depths of discharge, and high-power characterization at different temperatures; to supplement typical electrical measurements of voltage, capacity, and energy, Electrochemical Impedance Spectroscopy (EIS) was used to characterize the health of some cells on an ongoing basis. In addition, destructive physical analysis was carried out on these cells to analyze their electrode materials and correlate them with their performance characteristics. The demonstrated performance of several cells indicated their viability for further extensive space-qualification prior to their implementation in space missions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1149/1945-7111/abf05f

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY-NC-ND · From the PDF
Image 2
CC-BY-NC-ND · From the PDF
Image 3
CC-BY-NC-ND · From the PDF
Image 4
CC-BY-NC-ND · From the PDF
Image 5
CC-BY-NC-ND · From the PDF
Figure 1 Growth in the capacity of 18650 cells over the last several decades (Refs. 10, 11).
Figure 1 Growth in the capacity of 18650 cells over the last several decades (Refs. 10, 11).CC-BY-NC-ND · From the PDF
Figure 2 XRD data for anodes extracted from the COTS 18650 cells.
Figure 2 XRD data for anodes extracted from the COTS 18650 cells.CC-BY-NC-ND · From the PDF
Image 8
CC-BY-NC-ND · From the PDF
Figure 4 SEM images of cathodes from (A) LG Chem MJ1, (B) Samsung 35E, (C) Panasonic BJ, (D) LG Chem M36 and (E) Sony VC7 cells.
Figure 4 SEM images of cathodes from (A) LG Chem MJ1, (B) Samsung 35E, (C) Panasonic BJ, (D) LG Chem M36 and (E) Sony VC7 cells.CC-BY-NC-ND · From the PDF
Figure 5 Cycling of COTS 18650 cells at C/5 over 3.0 to 4.1 V at 20 °C: (A), (B) Capacity; (C), (D) Capacity Retention; (E), (F) Speci fi c energy; and (G), (H) Energy ef fi ciency.
Figure 5 Cycling of COTS 18650 cells at C/5 over 3.0 to 4.1 V at 20 °C: (A), (B) Capacity; (C), (D) Capacity Retention; (E), (F) Speci fi c energy; and (G), (H) Energy ef fi ciency.CC-BY-NC-ND · From the PDF
Figure 6 EIS of COTS 18650 cells during 100% DOD cycling at 20 °C: (A) LG Chem MJ1, (B) LG Chem M36, (C) Samsung 35E, (D) Murata VC7, (E) Panasonic BJ, (F) LG HG2, (G) Samsung 30Q,. (H) Samsung 36 G, and (I) Panasonic GA.
Figure 6 EIS of COTS 18650 cells during 100% DOD cycling at 20 °C: (A) LG Chem MJ1, (B) LG Chem M36, (C) Samsung 35E, (D) Murata VC7, (E) Panasonic BJ, (F) LG HG2, (G) Samsung 30Q,. (H) Samsung 36 G, and (I) Panasonic GA.CC-BY-NC-ND · From the PDF
Figure 7 Equivalent circuit for the EIS of a Li-ion cell: R s is the series bulk resistance, R SEI and CPE SEI are the resistance and capacitance of the anode SEI, CPE dl is the double layer capacitance, R CT is the charge transfer resistance and W is the Warburg impedance of the cathode.
Figure 7 Equivalent circuit for the EIS of a Li-ion cell: R s is the series bulk resistance, R SEI and CPE SEI are the resistance and capacitance of the anode SEI, CPE dl is the double layer capacitance, R CT is the charge transfer resistance and W is the Warburg impedance of the cathode.CC-BY-NC-ND · From the PDF
Image 13
CC-BY-NC-ND · From the PDF
Figure 8 (Continued.)
Figure 8 (Continued.)CC-BY-NC-ND · From the PDF
Image 15
CC-BY-NC-ND · From the PDF
Image 16
CC-BY-NC-ND · From the PDF
Figure 9 Cycling of COTS 18650 cells at C/5 over 3.0 to 4.1 V at 0 °C: (A) capacity, (B) capacity retention, (C) speci fi c energy, and (D) energy ef fi ciency.
Figure 9 Cycling of COTS 18650 cells at C/5 over 3.0 to 4.1 V at 0 °C: (A) capacity, (B) capacity retention, (C) speci fi c energy, and (D) energy ef fi ciency.CC-BY-NC-ND · From the PDF
Figure 10 DC resistance vs state-of-charge measured by current interrupt at 20 °C at (A) 80% SOC and (B) 40% SOC, and at 0 °C at (C) 80% SOC and (D) 40% SOC, over the course of 100% DOD cycling at 0 °C on LG M36, LG MJ1, Panasonic GA, Samsung 35E, and Samsung 36 G.
Figure 10 DC resistance vs state-of-charge measured by current interrupt at 20 °C at (A) 80% SOC and (B) 40% SOC, and at 0 °C at (C) 80% SOC and (D) 40% SOC, over the course of 100% DOD cycling at 0 °C on LG M36, LG MJ1, Panasonic GA, Samsung 35E, and Samsung 36 G.CC-BY-NC-ND · From the PDF
Figure 11 Cycling of COTS 18650 cells in LEO cycling mode at 20% depth of discharge at 20 °C:. (A) EODV, (B) cell capacity and (C) Capacity retention during cycling.
Figure 11 Cycling of COTS 18650 cells in LEO cycling mode at 20% depth of discharge at 20 °C:. (A) EODV, (B) cell capacity and (C) Capacity retention during cycling.CC-BY-NC-ND · From the PDF
Image 20
CC-BY-NC-ND · From the PDF
Figure 13 Cycling of LG Chem MJ1 cells at different depth of discharge: 100% DOD, 40% DOD and 20% DOD. Cycle life extrapolated at 100% DOD is 3000 cycles; 40% DoD:25000 cycles and 20% DOD 60000 cycles.
Figure 13 Cycling of LG Chem MJ1 cells at different depth of discharge: 100% DOD, 40% DOD and 20% DOD. Cycle life extrapolated at 100% DOD is 3000 cycles; 40% DoD:25000 cycles and 20% DOD 60000 cycles.CC-BY-NC-ND · From the PDF
Figure 14 Cycle life trends of COTS 18650 cells at 100% DoD and 20 °C, showing the complexity of the performance degradation involving multiple processes and the dif fi culty in expressing the fade by simple analytical expressions.
Figure 14 Cycle life trends of COTS 18650 cells at 100% DoD and 20 °C, showing the complexity of the performance degradation involving multiple processes and the dif fi culty in expressing the fade by simple analytical expressions.CC-BY-NC-ND · From the PDF
Figure 15 Speci fi c energy vs discharge current of COTS 18650 cells at different temperatures: (A) 20 °C, (B) 0 °C and (C) -20 °C.
Figure 15 Speci fi c energy vs discharge current of COTS 18650 cells at different temperatures: (A) 20 °C, (B) 0 °C and (C) -20 °C.CC-BY-NC-ND · From the PDF
Figure 16 Discharge curves (dotted) and increase in cell temperatures (lines) during high rate (3 C, 9.6 A) discharge of COTS 18650 cells at different temperatures with convective control: (A) 20 °C, (B) 30 °C, (C) 40 °C and D) 50 °C. Figure 14E shows the heat generation rate during the high rate discharge at 20 °C.
Figure 16 Discharge curves (dotted) and increase in cell temperatures (lines) during high rate (3 C, 9.6 A) discharge of COTS 18650 cells at different temperatures with convective control: (A) 20 °C, (B) 30 °C, (C) 40 °C and D) 50 °C. Figure 14E shows the heat generation rate during the high rate discharge at 20 °C.CC-BY-NC-ND · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 40 references

Research works printed but not linked: 3

  1. T. Nagaura and K. Tazawa, Prog. Batteries Sol. Cells, 9, 20 (1990).
  2. T. Ohzuku and Y. Makimura, Chem. Lett., 5, 874 (2001).
  3. M. C. Smart, B. V. Ratnakumar, and S. Surampudi, "Electrolytes for low- temperature lithium batteries based on ternary mixtures of aliphatic carbonates." J. Electrochem. Soc., 146, 486 (1999). · DOI · Paper page

Cited by

Metadata

Authors
Krause, F. C., Ruiz, J. P., Jones, S. C., Brandon, E. J., Darcy, E. C., Iannello, C. J., & Bugga, R. V.
Affiliations
  • California Institute of Technology (US)
  • Johnson Space Center (US)
  • Kennedy Space Center (US)
Corresponding author
Bugga, R. V.
Venue
Journal of The Electrochemical Society
Published
2021-04-01
Volume
168
Issue
4
Pages
040504
ISSN
  • 0013-4651 (ISSN-L)
  • 1945-7111
OpenAlex
W3139242209
Cited by
90
References
41
Citations by year
2026: 17 · 2025: 25 · 2024: 16 · 2023: 18 · 2022: 12 · 2021: 2
FWCI
3.90
Type
journal article
Language
en
Open access
Licence
Locations
Journal of The Electrochemical Society (publishedVersion, cc-by-nc-nd)
Funders
  • National Aeronautics and Space Administration (80NM0018D0004)
  • University of California, Santa Cruz
  • California Institute of Technology (80 NM0018D0004)
  • Jet Propulsion Laboratory (80NM0018D0004)
  • NASA Engineering and Safety Center
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Keywords
lithium-ion cells, 18650 cells, space power systems, planetary missions, cycle life, depth of discharge, temperature effects, electrochemical impedance spectroscopy, destructive physical analysis, electrode materials, battery health monitoring, NASA missions

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.