Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
The dispersing solvent used for fuel cell catalyst ink preparation plays a vital role in establishing the resulting morphology of the electrode layers, which in turn will impact the performance of proton exchange membrane (PEM) fuel cells. In this study, we report the impact of various ionomer dispersion solvents on PEM fuel cell performance and durability; two aqueous (1-propanol/water and 2-propanol/water) and several non-aqueous dispersing solvents (ethylene glycol and 1,2-butanediol) are compared. The cathode catalyst layer (CCL) fabricated using inks prepared with 1-propanol/water (3:1, w/w) exhibited the best initial performance followed by the CCL prepared using ethylene glycol. The CCLs made from non-aqueous ethylene glycol and 1,2-butanediol exhibited the best durability upon accelerated stress testing. Scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy indicated that, after the stress test, the distribution of both the Nafion ionomer and Pt nanoparticles within the CCLs prepared with non-aqueous ionomer dispersions underwent less change than those prepared with aqueous dispersions, which is responsible for the improved durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Furthermore, the ink containing 2-propanol exhibits a stronger shear-thinning behavior and a higher viscosity than that containing 1-propanol [57].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“It was reported that cracks [57,58,141] or larger ionomer patches [49] are more likely formed in the CLs made of the ink containing water/2-propanol.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
The cited source says what the claim attributes to it.
In the citing paper
“In the inks containing water/propanol mixed solvents with the same ratio, the ink containing water/1-propanol has smaller agglomerates than the case of water/2-propanol [57].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
The cited source says what the claim attributes to it.
In the citing paper
“The application of different solvents in ionomers also shows a significant effect on MEA durability.”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [172]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Self-citationPolymer Science: A Comprehensive Reference
(2012) · Elsevier eBooks · doi:10.1016/c2009-1-28406-1 · Cited by 1,114
Thin-film catalyst layers for polymer electrolyte fuel cell electrodes
Wilson, M. S., & Gottesfeld, S. (1992) · Journal of Applied Electrochemistry · doi:10.1007/bf01093004 · Cited by 871
Lucia, U. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.09.025 · Cited by 359
WATANABE, M., & WILLIAMS, D. B. (2006) · Journal of Microscopy · doi:10.1111/j.1365-2818.2006.01549.x · Cited by 257
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Self-citationUnderstanding Pt Nanoparticle Anchoring on Graphene Supports through Surface Functionalization
Xin, L., Yang, F., Rasouli, S., Qiu, Y., Li, Z.-F., Uzunoglu, A., Sun, C.-J., Liu, Y., Ferreira, P., Li, W., et al. (2016) · ACS Catalysis · doi:10.1021/acscatal.5b02722 · Cited by 209
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
Efficiency and economics of proton exchange membrane (PEM) fuel cells
Barbir, F. (1996) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(96)00030-4 · Cited by 157
Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A. (2015) · ChemElectroChem · doi:10.1002/celc.201500131 · Cited by 143
Research works printed but not linked: 4
- 37. G. Doo, J. H. Lee, S. Yuk, S. Choi, D.-H. Lee, D. W. Lee, H. G. Kim, S. H. Kwon, S. G. Lee, and H.-T. Kim, ACS Appl. Mater. & Interf., 10, 17835 (2018). · DOI · Paper page
- 38. T.-H. Kim, J.-Y. Yi, C.-Y. Jung, E. Jeong, and S.-C. Yi, Int. J. Hydrogen Energy, 42, 478 (2017). · DOI · Paper page
- 45. Y. S. Kim, "Interfacial Behavior of Polymer Electrolytes in Fuel Cell Electrodes." Fuel Cells Gordon Research Conference, Smithfield, RI, United States of America (Bryant University) (2018), https://www.grc.org/fuel-cells-conference/2018/.
- 46. Y. S. Kim, ""The solubility parameter of Nafion" advances in materials for proton exchange membrane fuel cells system." Feb., 17Asilomar Conference Grounds Pacific Grove, United States of America (2013).
Cited by
Xu, Q., Zhang, L., Zhang, J., Wang, J., Hu, Y., Jiang, H., & Li, C. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100087 · Cited by 341
“dramatic electrocatalytic properties [83,86].”
BackgroundRecent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“It was specifically shown that nonaqueous dispersion solvents are more beneficial than aqueous solvents [172].”
Probing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“It was reported that cracks [57,58,141] or larger ionomer patches [49] are more likely formed in the CLs made of the ink containing water/2-propanol.”
BackgroundInfluentialArunkumar, I., Kim, A. R., Lee, S. H., & Yoo, D. J. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.184 · Cited by 79
Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
Kim, Y. S. (2023) · Advanced Science · doi:10.1002/advs.202303914 · Cited by 69
Self-citationDesign of PEM water electrolysers with low iridium loading
Wang, C. R., Lee, K., Liu, C. P., Kulkarni, D. S., Atanassov, P. B., Peng, X., & Zenyuk, I. V. (2024) · International Materials Reviews · doi:10.1177/09506608231216665 · Cited by 72
Harsha, S., Sharma, R. K., Dierner, M., Baeumer, C., Makhotkin, I. A., Mul, G., Ghigna, P., Spiecker, E., Will, J., & Altomare, M. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403628 · Cited by 56
Cha, J.-E., Jang, S. A., Seo, D.-J., Hwang, J., Seo, M. H., Choi, Y. W., & Kim, W. B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140091 · Cited by 53
The impact of different side chain ionomer on membrane electrode assembly performance and durability
Liu, S., Lin, R., Lu, J., Wang, Y., & Cai, X. L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145050 · Cited by 48
Berlinger, S. A., Chowdhury, A., Cleve, T. V., He, A., Dagan, N., Neyerlin, K. C., McCloskey, B. D., Radke, C. J., & Weber, A. Z. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10499 · Cited by 50
Yang, P., Huang, J., Li, J., Luo, K., Zhang, L., Fu, Q., Zhu, X., & Liao, Q. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.10.108 · Cited by 43
Cossar, E., Murphy, F., Walia, J., Weck, A., & Baranova, E. A. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c01604 · Cited by 42
Zhou, Y., Guo, W., Xing, L., Li, J., Wang, N., Meng, L., Ye, S., Yang, X., Chen, H., & Du, L. (2025) · Energy & Environmental Science · doi:10.1039/d5ee03461b · Cited by 40
Pavko, L., Gatalo, M., Križan, G., Križan, J., Ehelebe, K., Ruiz‐Zepeda, F., Šala, M., Dražić, G., Geuß, M., Kaiser, P., et al. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02570 · Cited by 34
Liu, C., Luo, M., Zeis, R., Chuang, P. A., Zhang, R., Du, S., & Sui, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.08.154 · Cited by 34
Yoshino, S., Harada, M., Hasegawa, N., & Jinnouchi, R. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133847 · Cited by 30
Mehrazi, S., Homayouni, T., Kakati, N., Sarker, M., Rolfe, P., & Chuang, P. A. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.122680 · Cited by 28
Crack evolution during the film drying process of fuel cell microporous layer ink
Chen, Z., Pan, W., Yao, D., Gao, M. X., Gao, Y., Chen, X., Krzywański, J., & Wang, F. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129283 · Cited by 26
So, S., & Oh, K. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232664 · Cited by 25
Soleymani, A. P., Bonville, L. J., Wang, C., Schaefer, S., Waldecker, J. R., & Janković, J. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232807 · Cited by 25
Baez-Cotto, C. M., Pfeilsticker, J., Godoy, A. O., Batool, M., Zaccarine, S. F., Wang, M., Bird, O. F., Pylypenko, S., Janković, J., Ulsh, M., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233567 · Cited by 25
Song, W., Liu, X., Guan, Y., Ding, X., Bai, Y., Nie, J., Wang, Y., Wu, L., Ge, X., & Xu, T. (2025) · Nature Communications · doi:10.1038/s41467-025-65254-5 · Cited by 27
“This mass transfer phenomenon-driven by surface tension gradient during solvent volatilization-results in uneven coating fl ow and defect formation, known as the Marangoni effect 18,19 .”
Soleymani, A. P., Reid, M., & Janković, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202209733 · Cited by 24
Wang, M., Peng, F., Zou, J., Zhao, W. G., Wu, M., Williams, M. C., Yu, G., & Wang, H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115707 · Cited by 23
Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells
Han, C., Shi, W., Huang, M., Wang, Q., Yang, J., Chen, J., Ding, R., & Yin, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14404 · Cited by 23
Catalyst layers for fluorine‐free hydrocarbon PEMFCs
Balogun, E., Mardle, P., Nguyen, H. Q., Breitwieser, M., & Holdcroft, S. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.139479 · Cited by 24
Ionomeric binders in polymer electrolyte fuel cells: roles, challenges, and advances
Yu, W., Luo, F., Liang, X., Jiang, C., Xu, Y., Liu, Z., An, Q., Guiver, M. D., Wu, L., & Xu, T. (2025) · Chemical Society Reviews · doi:10.1039/d5cs00406c · Cited by 21
Su, Y., Cheng, X., Feng, Y., Li, H., Yan, C., He, M., Luo, L., Shen, S., Yan, X., & Zhang, J. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234453 · Cited by 22
Jung, C., Choi, S.-W., Choi, W.-Y., Hong, C.-W., Jothi, V. R., & Yi, S. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120609 · Cited by 22
Durable Fuel Cell Electrode Design via Efficient Distribution of the Acidic Ionomer
Ramaswamy, N., & Wortman, J. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c02704 · Cited by 23
Tian, Y., Pei, L., Wang, S., Yu, K., Xu, Y., Ye, X., Zhu, S., Liu, Y., Zhang, Z., & Ye, Z. (2026) · Nature Communications · doi:10.1038/s41467-026-68436-x · Cited by 19
“36).”
Foster, J. G., Lyu, X., Serov, A., Mauger, S. A., Padgett, E., & Pylypenko, S. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.145705 · Cited by 19
Performance-Limiting Factors of Hydrocarbon Ionomeric Binders for Fuel Cells and Electrolyzers
Choi, J., Agarwal, T., Park, H., Jung, J., Uddin, A., Ahn, S. M., Klein, J. M., Lee, A. S., Lehmann, M. L., Fujimoto, C. H., et al. (2025) · ACS Energy Letters · doi:10.1021/acsenergylett.5c00487 · Cited by 20
Self-citationPunyawudho, K., Pugalenthi, M. R., Shu, X., Kaneco, S., Wongwuttanasatian, T., Suksri, A., & Payattikul, L. (2024) · International Journal of Energy Research · doi:10.1155/er/9529659 · Cited by 18
Sun, X., Zhang, J., & Pan, C. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.123065 · Cited by 17
Taning, A. Z., Lee, S., Woo, S., Park, S., Bae, B., & Yim, S. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac2c13 · Cited by 18
Quarz, P., Zimmerer, N., Scharfer, P., & Schabel, W. (2024) · Fuel Cells · doi:10.1002/fuce.202300252 · Cited by 17
Zhang, D., Ye, K., & Li, X. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c11463 · Cited by 16
Screen Printing Catalyst Inks With Enhanced Process Stability for PEM Fuel Cell Production
Ney, L., Seidl, N., Singh, R., Schneider, P., Stross, D., Göppentin, A., Tepner, S., Klingele, M., & Keding, R. J. (2024) · Fuel Cells · doi:10.1002/fuce.202400158 · Cited by 16
“Lei et al. [33] conducted accelerated stress tests as well and found that CLs made from ethylene glycol and 1,2-butanediol had the best durability in terms of less changes in the distribution of ionomer and Pt-nanoparticles.”
Horst, R. J., & Forner‐Cuenca, A. (2024) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2024.101053 · Cited by 14
Zhou, Y., Kang, J., Chen, B., Zheng, W., Zhang, C., Ming, P., Pan, F., Wang, J., & Li, B. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103468 · Cited by 17
Machine learning in next-generation AEM fuel cells: a systematic review
Ponnada, S. (2026) · RSC Advances · doi:10.1039/d5ra08517a · Cited by 13
Yang, D., Guo, Y., Li, B., Yang, D., Ming, P., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.02.047 · Cited by 13
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235884 · Cited by 13
Toward a Mechanically Rechargeable Solid Fuel Flow Battery Based on Earth-Abundant Materials
Fenton, A. M., Gandomi, Y. A., Mallia, C. T., Neyhouse, B. J., Kpeglo, M. A., Exson, W. E., Wan, C. T., & Brushett, F. R. (2022) · ACS Omega · doi:10.1021/acsomega.2c05798 · Cited by 12
Lafforgue, C., Toudret, P., Micoud, F., Heitzmann, M., Blachot, J.-F., & Chatenet, M. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235851 · Cited by 11
Mitra, D., Heinrich, K., Gierse, S., Zeiner, C., Siegel, F., Willert, A., & Zichner, R. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236503 · Cited by 12
Ferriday, T. B., Middleton, P. H., Kolhe, M. L., & herle, J. V. (2023) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2023.100525 · Cited by 11
Burghart, J., Ovarlez, G., & Medina‐González, Y. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238497 · Cited by 10
Wen, Z., Li, S., Yi, S., Zhao, Q., Zhu, Z., & Pan, M. (2023) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2023.100152 · Cited by 10
Yoo, D.-Y., Jung, J., Park, Y. S., Choi, G. H., Yoon, H. G., Hwang, S. S., & Lee, A. S. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta03592a · Cited by 10
Turtayeva, Z., Xu, F., Dillet, J., Mozet, K., Peignier, R., Celzard, A., & Maranzana, G. (2023) · Energies · doi:10.3390/en16227519 · Cited by 10
Choi, W.-J., Kang, I., Yu, D. M., Yoon, S. J., So, S., & Oh, K. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00221-2 · Cited by 10
Zhao, Q., Morawietz, T., Gazdzicki, P., & Friedrich, K. A. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145273 · Cited by 8
Ionomer-free electrodes in PEM water electrolyzers: a critical review
Chen, M., Ren, Y., Lee, C., & Lee, J. K. (2025) · Journal of Physics Energy · doi:10.1088/2515-7655/adf6e3 · Cited by 9
Effect of emulsification of catalyst ink on the structure of catalyst layer in PEMFC
Huang, Z., An, Z., Yang, D., Zhang, D., & Ding, Y. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151830 · Cited by 7
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Stoll, J., Jeong, J., Huynh, P., & Kjeang, E. (2024) · Journal of the Electrochemical Society · doi:10.1149/1945-7111/ad4c11 · Cited by 6
Wang, W., Yin, S., Cheng, X., Chen, L., Huang, R., Wang, Y., Wang, T., Zhou, Z., Jiang, Y.-X., & Sun, S. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.148422 · Cited by 7
Effects of Catalyst Ink Storage on Polymer Electrolyte Fuel Cells
Kircher, M., Roschger, M., Koo, W. Y., Blaschke, F., Grandi, M., Bodner, M., & Hacker, V. (2023) · Energies · doi:10.3390/en16197011 · Cited by 6
Colloidal Nafion morphology in 1,2-alkanediols and its impact on membrane and ionomer properties
Klein, J. M., Kim, D., Welch, C. F., Hjelm, R. P., Hawley, M. E., Sokolova, A. V., Yim, S., Macauley, N., Xu, H., Pedram, S., et al. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163884 · Cited by 5
Self-citationLiu, P., Yang, D., Li, B., Zhang, L., Xiao, L., & Chen, H. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151672 · Cited by 4
Current status and prospects of fuel cell electric vehicle industrialization in China
Luo, S., Zhang, K., Li, G., Li, X., Wang, Q., 邢丹敏, & Yi, B. (2026) · Carbon Neutrality · doi:10.1007/s43979-026-00171-0 · Cited by 6
Quarz, P., Zimmerer, N., Janning, L., Steck, A., Scharfer, P., & Schabel, W. (2025) · Energy Technology · doi:10.1002/ente.202501844 · Cited by 4
Batool, M., Godoy, A. O., Birnbach, M., Dekel, D. R., & Janković, J. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acd584 · Cited by 4
Park, J.-H., Heo, J., Park, H. S., & Park, J. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238180 · Cited by 3
Quarz, P., Janning, L., Zimmerer, N., Scharfer, P., & Schabel, W. (2026) · Drying Technology · doi:10.1080/07373937.2026.2616748 · Cited by 3
van Schalkwyk, F., Sakars, A., Levecque, P. B. J., & Susac, D. (2024) · ECS Advances · doi:10.1149/2754-2734/ad58f8 · Cited by 3
Sulfonated Diels–Alder Poly(Phenylene)s in Membrane Electrode Assemblies for Fuel Cells
Park, H., Agarwal, T., Kim, Y., Fujimoto, C. H., Park, E. J., Borup, R. L., & Kim, Y. S. (2025) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202500224 · Cited by 4
Self-citationLiao, K., Watanabe, T., Kumar, M., Thakur, N., Arao, M., Matsumoto, M., Imai, H., & Uchimoto, Y. (2025) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c04281 · Cited by 2
Yang, D., Guo, Y., Zhang, Z., Wang, J., Zheng, W., Yang, D., Ming, P., & Li, B. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154539 · Cited by 2
Design of platinum nanoflower catalyst exhibiting near-ideal local coordination in a complex shape
Ly, A., Asset, T., Murphy, E., Khedekar, K., Huang, Y. L., Li, X., Xu, M., Wang, H., Chattot, R., Pan, X. Q., et al. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.143282 · Cited by 2
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4874817 · Cited by 2
Wu, G., Chen, Y., Zhu, J., & Wei, J. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.152458 · Cited by 1
Takeshita, K., Wijakmatee, T., Matsumoto, H., Yoshikawa, S., & Saito, T. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.139952 · Cited by 1
Template‐Based Structured Electrodes for High Power and Durable Proton Exchange Membrane Fuel Cells
Ren, Y., Liu, L., Hwang, D. K., & Lee, C. (2026) · SusMat · doi:10.1002/sus2.70081 · Cited by 1
Towards a mechanically-rechargeable solid fuel flow battery based on earth-abundant materialsPreprint
Fenton, A. M., Gandomi, Y. A., Mallia, C. T., Neyhouse, B. J., Kpeglo, M. A., Exson, W. E., & Brushett, F. R. (2022) · ChemRxiv · doi:10.26434/chemrxiv-2022-mgp5n
Cha, J.-E., Jang, S. A., Seo, D.-J., Choi, Y.-W., & Kim, W. B. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4111087
Towards a mechanically rechargeable solid fuel flow battery based on earth-abundant materialsPreprint
Fenton, A. M., Gandomi, Y. A., Mallia, C. T., Neyhouse, B. J., Kpeglo, M. A., Exson, W. E., Wan, C. T., & Brushett, F. R. (2022) · ChemRxiv · doi:10.26434/chemrxiv-2022-mgp5n-v2
Towards a mechanically rechargeable solid fuel flow battery based on earth-abundant materialsPreprint
Fenton, A. M., Gandomi, Y. A., Mallia, C. T., Neyhouse, B. J., Kpeglo, M. A., Exson, W. E., Wan, C. T., & Brushett, F. R. (2022) · ChemRxiv · doi:10.26434/chemrxiv-2022-mgp5n-v3
Taylor, A. K., Baez-Cotto, C. M., Hu, L., Smith, C., Rodriguez-Nazario, A., Young, J. L., Mauger, S. A., & Neyerlin, K. C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4975511
Harsha, S., Wichmann, L., Mul, G., & Altomare, M. (2025) · ChemElectroChem · doi:10.1002/celc.202500261
The scientific case for concurrent neutron and X-ray scattering and spectroscopy
Hjelm, R. P., Weber, J., Hussey, D. S., Bockstaller, M. R., Vogel, S. C., Khaykovich, B., Siebenbürger, M., Ham, K., Lerche, M., Butler, L. G., et al. (2025) · Journal of Neutron Research · doi:10.1177/10238166251415133
Chen, H., Yang, D., Chu, T., Chen, B., Zheng, W., Wang, J. C., Yang, D., Ming, P., & Li, B. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c02112 · Cited by 1
Lee, G., Islam, M. R., Kim, H.-S., Kwak, I., Park, J., Kwon, K., Rim, H., Moon, S., Lee, H.-K., Kim, S. Y., et al. (2026) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-026-00754-8
Ochoa, J. A. L., & Zenyuk, I. V. (2026) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2026.103375
Miyagawa, A., Sugiyama, S., Fujita, S., Fujinaga, Y., Ito, J., & Chikama, K. (2026) · Talanta · doi:10.1016/j.talanta.2026.130368
Quarz, P. (2026) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000195965
Zhang, D. Y., Young, E., Cleve, T. V., Yu, H., Soetrisno, D. D., Reeves, K. S., Mauger, S. A., & Baez-Cotto, C. M. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.157024
From half-cell to heavy-duty: a critical review of MXene catalysts for PEMFC cathodes
Kule, T. D., Bahru, T. B., Getachew, N. A., Kassa, T. S., Yessuf, A. M., Mohideen, M. M., Shibeshi, P. T., & Liu, Y. (2026) · Fuel · doi:10.1016/j.fuel.2026.141216
Developing practical high-Pt-Loading Pt/C electrocatalysts for proton exchange membrane fuel cells
Zhang, Z., Gao, G., Hong, T., Li, H., Sun, Z., Dai, L., & Cabot, A. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218526
Huang, J., Liang, M., Lin, J., Pan, Z., Peng, J., & Wang, L. (2026) · Advanced Science · doi:10.1002/advs.78090
Calixarene-regulated ionomer microenvironments for enhanced oxygen transport in AEMFC cathodes
Tai, X., Wang, N., Liu, W., Pang, B., Wu, X., Chen, W., & He, G. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.150207
Jiang, S., Wang, P., Gong, Y., Sun, Z., Chen, H., Wang, G., Tao, T., Zhai, C., Wang, X., 陈锐鑫, et al. (2026) · Carbon Energy · doi:10.1002/cey2.70311
Xiang, Q., Jiang, S., Yang, N., Xie, Z., Li, L., & Wei, Z. (2026) · Physical Chemistry Chemical Physics · doi:10.1039/d6cp03392j
Metadata
- Authors
- Lei, C., Yang, F., Macauley, N., Spinetta, M., Purdy, G., Jankovic, J., Cullen, D. A., More, K. L., Kim, Y. S., & Xu, H.
- Affiliations
- Giner (United States) (US)
- Los Alamos National Laboratory (US)
- Oak Ridge National Laboratory (US)
- Corresponding author
- Xu, Hui
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2021-04-01
- Volume
- 168
- Issue
- 4
- Pages
- 044517
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3152485849
- Cited by
- 93
- References
- 43
- Citations by year
- 2026: 18 · 2025: 21 · 2024: 20 · 2023: 16 · 2022: 13 · 2021: 5
- FWCI
- 3.97
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-nc-nd
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor, 13 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 13 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by-nc-nd)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (#89233218CNA000001, DESC0012049)
- University of Connecticut
- Office of Science (89233218CNA000001)
- Oak Ridge National Laboratory
- Los Alamos National Laboratory (89233218CNA 000001)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst ink, ionomer dispersion, cathode catalyst layer, fuel cell durability, accelerated stress testing, Nafion ionomer, platinum nanoparticles, ethylene glycol, 1,2-butanediol, non-aqueous solvents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.