Impact of Catalyst Ink Dispersing Solvent on PEM Fuel Cell Performance and Durability
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
The dispersing solvent used for fuel cell catalyst ink preparation plays a vital role in establishing the resulting morphology of the electrode layers, which in turn will impact the performance of proton exchange membrane (PEM) fuel cells. In this study, we report the impact of various ionomer dispersion solvents on PEM fuel cell performance and durability; two aqueous (1-propanol/water and 2-propanol/water) and several non-aqueous dispersing solvents (ethylene glycol and 1,2-butanediol) are compared. The cathode catalyst layer (CCL) fabricated using inks prepared with 1-propanol/water (3:1, w/w) exhibited the best initial performance followed by the CCL prepared using ethylene glycol. The CCLs made from non-aqueous ethylene glycol and 1,2-butanediol exhibited the best durability upon accelerated stress testing. Scanning transmission electron microscopy combined with energy dispersive X-ray spectroscopy indicated that, after the stress test, the distribution of both the Nafion ionomer and Pt nanoparticles within the CCLs prepared with non-aqueous ionomer dispersions underwent less change than those prepared with aqueous dispersions, which is responsible for the improved durability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Furthermore, the ink containing 2-propanol exhibits a stronger shear-thinning behavior and a higher viscosity than that containing 1-propanol [57].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“It was reported that cracks [57,58,141] or larger ionomer patches [49] are more likely formed in the CLs made of the ink containing water/2-propanol.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
The cited source says what the claim attributes to it.
In the citing paper
“In the inks containing water/propanol mixed solvents with the same ratio, the ink containing water/1-propanol has smaller agglomerates than the case of water/2-propanol [57].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [57]
The cited source says what the claim attributes to it.
In the citing paper
“The application of different solvents in ionomers also shows a significant effect on MEA durability.”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [172]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Self-citationPolymer Science: A Comprehensive Reference
(2012) · Elsevier eBooks · doi:10.1016/c2009-1-28406-1 · Cited by 1,114
Thin-film catalyst layers for polymer electrolyte fuel cell electrodes
Wilson, M. S., & Gottesfeld, S. (1992) · Journal of Applied Electrochemistry · doi:10.1007/bf01093004 · Cited by 871
Lucia, U. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.09.025 · Cited by 359
WATANABE, M., & WILLIAMS, D. B. (2006) · Journal of Microscopy · doi:10.1111/j.1365-2818.2006.01549.x · Cited by 257
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Self-citationUnderstanding Pt Nanoparticle Anchoring on Graphene Supports through Surface Functionalization
Xin, L., Yang, F., Rasouli, S., Qiu, Y., Li, Z.-F., Uzunoglu, A., Sun, C.-J., Liu, Y., Ferreira, P., Li, W., et al. (2016) · ACS Catalysis · doi:10.1021/acscatal.5b02722 · Cited by 209
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
Efficiency and economics of proton exchange membrane (PEM) fuel cells
Barbir, F. (1996) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(96)00030-4 · Cited by 157
Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A. (2015) · ChemElectroChem · doi:10.1002/celc.201500131 · Cited by 143
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Kim, T.-H., Yi, J.-Y., Jung, C.-Y., Jeong, E., & Yi, S.-C. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.12.015 · Cited by 127
Catalyst layer ink interactions that affect coatability
Dixit, M. B., Harkey, B. A., Shen, F., & Hatzell, K. B. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0191805jes · Cited by 126
Doo, G., Lee, J. H., Yuk, S., Choi, S., Lee, D.-H., Lee, D. W., Kim, H. G., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01751 · Cited by 126
Yang, F., Xin, L., Uzunoglu, A., Qiu, Y., Stanciu, L., Ilavsky, J., Li, W., & Xie, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12949 · Cited by 124
Self-citationFernández, R., Ferreira-Aparicio, P., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.048 · Cited by 120
Wang, W., Chen, S., Li, J., & Wang, W. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.02.027 · Cited by 115
Origin of Toughness in Dispersion-Cast Nafion Membranes
Kim, Y. S., Welch, C. F., Hjelm, R. P., Mack, N. H., Labouriau, A., & Orler, E. B. (2015) · Macromolecules · doi:10.1021/ma502538k · Cited by 102
Self-citationKneer, A., Jankovic, J., Susac, D., Putz, A., Wagner, N., Sabharwal, M., & Secanell, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0271806jes · Cited by 102
Tarokh, A., Karan, K., & Ponnurangam, S. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01663 · Cited by 101
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Balu, R., Choudhury, N. R., Mata, J. P., de Campo, L., Rehm, C., Hill, A. J., & Dutta, N. K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20645 · Cited by 96
Zamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Ahn, C., Ahn, J., Kang, S. Y., Kim, O., Lee, D. W., Lee, J. H., Shim, J. G., Lee, C., Cho, Y., & Sung, Y. (2020) · Science Advances · doi:10.1126/sciadv.aaw0870 · Cited by 88
Highly durable fuel cell electrodes based on ionomers dispersed in glycerol
Kim, Y. S., Welch, C. F., Mack, N. H., Hjelm, R. P., Orler, E. B., Hawley, M. E., Lee, K. S., Yim, S.-D., & Johnston, C. M. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00496e · Cited by 75
Self-citationDispersion-Solvent Control of Ionomer Aggregation in a Polymer Electrolyte Membrane Fuel Cell
Lee, J. H., Doo, G., Kwon, S. H., Choi, S., Kim, H.-T., & Lee, S. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-28779-y · Cited by 74
Sharma, R., & Andersen, S. M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14622 · Cited by 73
Cho, H. J., Jang, H., Lim, S., Cho, E., Lim, T., Oh, I., Kim, H., & Jang, J. H. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.06.113 · Cited by 65
Integrating nanostructured Pt-based electrocatalysts in proton exchange membrane fuel cells
Ly, A., Asset, T., & Atanassov, P. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228516 · Cited by 65
Impact of Dispersion Solvent on Ionomer Thin Films and Membranes
Berlinger, S. A., Dudenas, P. J., Bird, A., Chen, X., Freychet, G., McCloskey, B. D., Kusoglu, A., & Weber, A. Z. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01076 · Cited by 65
Chisaka, M., & Daiguji, H. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.01.018 · Cited by 52
STXM Study of the Ionomer Distribution in the PEM Fuel Cell Catalyst Layers
Susac, D., Berejnov, V., Hitchcock, A. P., & Stumper, J. (2011) · ECS Transactions · doi:10.1149/1.3635596 · Cited by 47
Evolution of Ionomer Morphology from Dispersion to Film: An in Situ X-ray Study
Dudenas, P. J., & Kusoglu, A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01024 · Cited by 46
Effects of Ionomer Carbon Ratio and Ionomer Dispersity on the Performance and Durability of MEAs
Lee, M. ‐., Lee, H. ‐., Yim, S. ‐., Kim, C. ‐., Shul, Y. ‐., Kucernak, A., & Shin, D. (2018) · Fuel Cells · doi:10.1002/fuce.201700178 · Cited by 44
Gupit, C. I., Li, X., Maekawa, R., Hasegawa, N., Iwase, H., Takata, S.-I., & Shibayama, M. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02314 · Cited by 41
The Effect of Cathode Structures on Nafion Membrane Durability
Choi, B., Langlois, D. A., Mack, N., Johnston, C. M., & Kim, Y. S. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0151412jes · Cited by 37
Self-citationSharma, R., Grahl-Madsen, L., & Andersen, S. M. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.01.015 · Cited by 36
Langlois, D. A., Lee, A. S., Macauley, N., Maurya, S., Hawley, M. E., Yim, S., & Kim, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.013 · Cited by 27
Self-citationLee, J. H., Doo, G., Kwon, S. H., Kang, H., Choi, S., Yim, S.-D., Kim, H.-T., & Lee, S. G. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00042 · Cited by 27
Performance and Durability of PEM Fuel Cells Operated at Sub-Freezing Temperatures
Mukundan, R., Davey, J. R., Lujan, R. W., Spendelow, J. S., Kim, Y. S., Hussey, D. S., Jacobson, D. L., Arif, M., & Borup, R. L. (2008) · ECS Transactions · doi:10.1149/1.2982034 · Cited by 23
Self-citationJung, H., Kim, J., & Park, J.-K. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.06.003 · Cited by 22
Polymers in Membrane Electrode Assemblies
Kim, D. S., Welch, C. F., Hjelm, R. P., Kim, Y. S., & Guiver, M. D. (2012) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.30008-4 · Cited by 19
Self-citationMicro-crack formation in direct methanol fuel cell electrodes
Li, Q., Spernjak, D., Zelenay, P., & Kim, Y. S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.036 · Cited by 15
Self-citation
Research works printed but not linked: 2
- Doo, 2018, ACS Appl. Mater. & Interf., 10, 17835, 10.1021/acsami.8b01751 · DOI · Paper page
- Kim, 2017, Int. J. Hydrogen Energy, 42, 478, 10.1016/j.ijhydene.2016.12.015 · DOI · Paper page
Cited by
Xu, Q., Zhang, L., Zhang, J., Wang, J., Hu, Y., Jiang, H., & Li, C. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100087 · Cited by 341
“dramatic electrocatalytic properties [83,86].”
BackgroundRecent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“It was specifically shown that nonaqueous dispersion solvents are more beneficial than aqueous solvents [172].”
Probing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“It was reported that cracks [57,58,141] or larger ionomer patches [49] are more likely formed in the CLs made of the ink containing water/2-propanol.”
BackgroundInfluentialArunkumar, I., Kim, A. R., Lee, S. H., & Yoo, D. J. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.184 · Cited by 79
Metadata
- Authors
- Lei, C., Yang, F., Macauley, N., Spinetta, M., Purdy, G., Jankovic, J., Cullen, D. A., More, K. L., Kim, Y. S., & Xu, H.
- Affiliations
- Giner (United States) (US)
- Los Alamos National Laboratory (US)
- Oak Ridge National Laboratory (US)
- Corresponding author
- Xu, Hui
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2021-04-01
- Volume
- 168
- Issue
- 4
- Pages
- 044517
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3152485849
- Cited by
- 93
- References
- 43
- Citations by year
- 2026: 18 · 2025: 21 · 2024: 20 · 2023: 16 · 2022: 13 · 2021: 5
- FWCI
- 3.97
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by-nc-nd
- creativecommons.org/licenses/by-nc-nd/4.0/ (vor, 13 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 13 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by-nc-nd)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (#89233218CNA000001, DESC0012049)
- University of Connecticut
- Office of Science (89233218CNA000001)
- Oak Ridge National Laboratory
- Los Alamos National Laboratory (89233218CNA 000001)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, catalyst ink, ionomer dispersion, cathode catalyst layer, fuel cell durability, accelerated stress testing, Nafion ionomer, platinum nanoparticles, ethylene glycol, 1,2-butanediol, non-aqueous solvents
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.