The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
Lithium Concentration Dependent Elastic Properties of Battery Electrode Materials from First Principles Calculations
Open accessAbstract
This paper aims to help fill a gap in the literature on Li-ion battery electrode materials due to the absence of measured elastic constants needed for diffusion induced stress models. By examining results from new first principles density functional theory (DFT) calculations of LiCoO 2 , LiMn 2 O 4 , (and their delithiated hosts, CoO 2 and MnO 2 ), Li x Al alloys, and data from the extant literature on LiFePO 4 (and FePO 4 ), LiTi 2 O 4 (and Li 2 Ti 2 O 4 ), Li x Si, Li x Sn and lihtium graphite-interaction-compounds, a compelling picture emerges on the dependency of the elastic properties on Li concentration. Specifically, three distinct categories of behavior are found: (a) the averaged Young's moduli change very minimally upon lithiation of the spinel and olivine structures; (b) lithiation induced stiffening is observed only when new and stronger bonds between the Li ions and the host materials are formed in layered compounds; and (c) for alloy-forming electrode materials, such as Si, β - Sn and Al, the averaged Young's moduli of lithiated compounds follow the linear rule of mixtures. The tendency of ductile or brittle behavior electrode materials is investigated with the Pugh criterion, and a ductile to brittle transition was found to occur during lithiation of Al and β-Sn, but not in Si.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Toward reliable density functional methods without adjustable parameters: The PBE0 model
Adamo, C., & Barone, V. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478522 · Cited by 19,042
The Elastic Behaviour of a Crystalline Aggregate
Hill, R. (1952) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/65/5/307 · Cited by 11,503
XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals
Pugh, S. F. (1954) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440808520496 · Cited by 8,657
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Assessment of the Perdew–Burke–Ernzerhof exchange-correlation functional
Ernzerhof, M., & Scuseria, G. E. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478401 · Cited by 5,497
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2204597 · Cited by 5,288
Ab‐initio simulations of materials using VASP: Density‐functional theory and beyond
Hafner, J. (2008) · Journal of Computational Chemistry · doi:10.1002/jcc.21057 · Cited by 5,192
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
A quantitative demonstration of the grain boundary diffusion mechanism for the oxidation of metals
Atkinson, A., Taylor, R. I., & Hughes, A. E. (1982) · Philosophical Magazine A · doi:10.1080/01418618208239905 · Cited by 2,540
Screened hybrid density functionals applied to solids
Paier, J., Marsman, M., Hummer, K., Kresse, G., Gerber, I. C., & Ángyán, J. G. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2187006 · Cited by 2,457
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
Intercalation compounds of graphite
Dresselhaus, M. S., & Dresselhaus, G. (2002) · Advances in Physics · doi:10.1080/00018730110113644 · Cited by 2,139
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Approaching Theoretical Capacity of LiFePO[sub 4] at Room Temperature at High Rates
Huang, H., Yin, S.-C., & Nazar, L. F. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1396695 · Cited by 1,407
Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
Le Page, Y., & Saxe, P. (2002) · Physical Review B · doi:10.1103/physrevb.65.104104 · Cited by 1,373
Size Dependent Fracture of Silicon Nanoparticles during Lithiation.
Huang, J., Liu, X., Zhong, L. S., Huang, S., Mao, S. X., & Zhu, T. (2011) · Nano Letters · Cited by 1,316
CoO2, The End Member of the Li x CoO2 Solid Solution
Amatucci, G. G., Tarascon, J. M., & Klein, L. C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836594 · Cited by 1,034
Dahn, J. R. (1991) · Physical Review B · doi:10.1103/physrevb.44.9170 · Cited by 991
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Electroactivity of natural and synthetic triphylite
Ravet, N., Chouinard, Y., Magnan, J. F., Besner, S., Gauthier, M., & Armand, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00727-3 · Cited by 844
Real-Time NMR Investigations of Structural Changes in Silicon Electrodes for Lithium-Ion Batteries
Key, B., Bhattacharyya, R., Morcrette, M., Seznéc, V., Tarascon, J.-M., & Grey, C. P. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8086278 · Cited by 752
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
A reversible graphite-lithium negative electrode for electrochemical generators
Yazami, R., & Touzain, P. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87040-2 · Cited by 624
Limthongkul, P., Jang, Y.-I., Dudney, N. J., & Chiang, Y. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00514-1 · Cited by 511
Qi, Y., Guo, H., Hector, L. G., & Timmons, A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3327913 · Cited by 491
Self-citationA Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide
Christensen, J., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2185287 · Cited by 485
Cheng, Y.-T., & Verbrugge, M. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.021 · Cited by 469
Shenoy, V. B., Johari, P., & Qi, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.044 · Cited by 445
Self-citationFracture of electrodes in lithium-ion batteries caused by fast charging
Zhao, K., Pharr, M., Vlassak, J. J., & Suo, Z. (2010) · Journal of Applied Physics · doi:10.1063/1.3492617 · Cited by 428
Thermodynamic and kinetic properties of the Li-graphite system from first-principles calculations
Persson, K., Hinuma, Y., Meng, Y. S., Van der Ven, A., & Ceder, G. (2010) · Physical Review B · doi:10.1103/physrevb.82.125416 · Cited by 421
(2009) · doi:10.1007/978-0-387-76424-5 · Cited by 394
Chevrier, V. L., Ong, S. P., Armiento, R., Chan, M. K. Y., & Ceder, G. (2010) · Physical Review B · doi:10.1103/physrevb.82.075122 · Cited by 358
Zhao, K., Wang, W. L., Gregoire, J., Pharr, M., Suo, Z., Vlassak, J. J., & Kaxiras, E. (2011) · Nano Letters · doi:10.1021/nl201501s · Cited by 342
Layered-to-Spinel Phase Transition in Li[sub x]MnO[sub 2]
Reed, J., Ceder, G., & der Ven, A. V. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1368896 · Cited by 340
Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Zhang, X., Sastry, A. M., & Shyy, W. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2926617 · Cited by 334
Rodríguez-Carvajal, J., Rousse, G., Masquelier, C., & Hervieu, M. (1998) · Physical Review Letters · doi:10.1103/physrevlett.81.4660 · Cited by 331
“Electrochemical Shock” of Intercalation Electrodes: A Fracture Mechanics Analysis
Woodford, W. H., Chiang, Y.-M., & Carter, W. C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3464773 · Cited by 323
Modeling diffusion-induced stress in nanowire electrode structures
Deshpande, R., Cheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.021 · Cited by 303
The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles
Cheng, Y.-T., & Verbrugge, M. W. (2008) · Journal of Applied Physics · doi:10.1063/1.3000442 · Cited by 302
Liu, Y., Hudak, N. S., Huber, D. L., Limmer, S. J., Sullivan, J. P., & Huang, J. Y. (2011) · Nano Letters · doi:10.1021/nl202088h · Cited by 302
Ab initio calculation of the lithium-tin voltage profile
Courtney, I. A., Tse, J. S., Mao, O., Hafner, J., & Dahn, J. R. (1998) · Physical Review B · doi:10.1103/physrevb.58.15583 · Cited by 284
Huggins, R. A., & Nix, W. D. (2000) · Ionics · doi:10.1007/bf02375547 · Cited by 282
Aluminum negative electrode in lithium ion batteries
Hamon, Y., Brousse, T., Jousse, F., Topart, P., Buvat, P., & Schleich, D. M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00616-4 · Cited by 259
In Situ Observation of Strains during Lithiation of a Graphite Electrode
Qi, Y., & Harris, S. J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3377130 · Cited by 259
Self-citationJahn–Teller distortion and electronic structure of LiMn2O4
Ouyang, C. Y., Shi, S. Q., & Lei, M. S. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.06.123 · Cited by 230
In situ measurement of biaxial modulus of Si anode for Li-ion batteries
Sethuraman, V. A., Chon, M. J., Shimshak, M., Winkle, N. V., & Guduru, P. R. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.09.008 · Cited by 221
Second generation Car–Parrinello molecular dynamics
Kühne, T. D. (2014) · WIREs Computational Molecular Science · doi:10.1002/wcms.1176 · Cited by 211
Coupling-constant dependence of atomization energies
Ernzerhof, M., Perdew, J. P., & Burke, K. (1997) · International Journal of Quantum Chemistry · doi:10.1002/(sici)1097-461x(1997)64:3<285::aid-qua2>3.0.co;2-s · Cited by 201
The Electrochemical Reaction of Lithium with Tin Studied By In Situ AFM
Beaulieu, L. Y., Beattie, S. D., Hatchard, T. D., & Dahn, J. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1556595 · Cited by 189
Deshpande, R., Qi, Y., & Cheng, Y.-T. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3454762 · Cited by 171
Self-citationEx-situ depth-sensing indentation measurements of electrochemically produced Si–Li alloy films
Hertzberg, B., Benson, J., & Yushin, G. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.05.011 · Cited by 158
Verbrugge, M. W., & Cheng, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3205485 · Cited by 142
Harnessing the Actuation Potential of Solid‐State Intercalation Compounds
Koyama, Y., Chin, T. E., Rhyner, U., Holman, R. K., Hall, S. R., & Chiang, Y. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500633 · Cited by 118
Prediction of Li Intercalation and Battery Voltages in Layered vs. Cubic Li x CoO2
Wolverton, C. M., & Zunger, A. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838653 · Cited by 116
Thermodynamics of the Ce γ–α transition: Density-functional study
Wang, Y., Hector, L. G., Zhang, H., Shang, S., Chen, L., & Liu, Z. (2008) · Physical Review B · doi:10.1103/physrevb.78.104113 · Cited by 106
Self-citationAl-based anode materials for Li-ion batteries
Lindsay, M. J., Wang, G., & Liu, H. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00130-7 · Cited by 103
Stochastic Analysis of Diffusion Induced Damage in Lithium-Ion Battery Electrodes
Barai, P., & Mukherjee, P. P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.132306jes · Cited by 98
Yang, B., He, Y.-P., Irša, J., Lundgren, C. A., Ratchford, J. B., & Zhao, Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.029 · Cited by 92
In Situ TEM on the Reversibility of Nanosized Sn Anodes during the Electrochemical Reaction
Li, Q., Wang, P., Feng, Q., Mao, M., Liu, J., Mao, S. X., & Wang, H. (2014) · Chemistry of Materials · doi:10.1021/cm5009448 · Cited by 90
Effects of electrode particle morphology on stress generation in silicon during lithium insertion
DeLuca, C. M., Maute, K. K., & Dunn, M. L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.035 · Cited by 65
Al–Si Thin-Film Negative Electrodes for Li-Ion Batteries
Fleischauer, M. D., Obrovac, M. N., & Dahn, J. R. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2977971 · Cited by 56
Kuksenko, S. P. (2013) · Russian Journal of Electrochemistry · doi:10.1134/s1023193512110080 · Cited by 52
Thermodynamic studies and the phase diagram of the Li-Sn system
Gąsior, W., Moser, Z., & Zakulski, W. (1996) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(96)00446-2 · Cited by 46
Wang, C. Y., Meng, Y. S., Ceder, G., & Li, Y. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2943215 · Cited by 38
Hansen, D. A., & Smith, J. F. (1968) · Acta Crystallographica Section B · doi:10.1107/s0567740868003407 · Cited by 33
Cited by
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Self-citationReversible planar gliding and microcracking in a single-crystalline Ni-rich cathode
Bi, Y., Tao, J., Wu, Y., Li, L., Xu, Y., Hu, E., Wu, B., Hu, J., Wang, C., Zhang, J.-G., et al. (2020) · Science · doi:10.1126/science.abc3167 · Cited by 889
Self-citationKoerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Self-citationA review on modeling of electro-chemo-mechanics in lithium-ion batteries
Zhao, Y., Stein, P., Bai, Y., Al-Siraj, M., Yang, Y., & Xu, B.-X. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.011 · Cited by 431
Metadata
- Authors
- Qi, Y., Hector, L. G., James, C., & Kim, K. J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2014
- Volume
- 161
- Issue
- 11
- Pages
- F3010-F3018
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1993107593
- Cited by
- 314
- References
- 76
- FWCI
- 9.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.